DC Power Supply Safety Relays
from Euchner-U.S.A., Inc.
EUCHNER ESM Safety Relays are designed to evaluate connected safety components and reliably turn off hazardous machine functions in the event of an unsafe condition. It will also ensure that the machine cannot be restarted until the unsafe condition is corrected and the module reset. This can be... [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- AC Voltage: 230
- Maximum Switching Current: 8.00
- DC Voltage: 24
from elobau U.S., Inc.
A maximum of 32 sensors may be used with an interconnection system. We recommend the use of elobau interface units 363 098. [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- AC Voltage: 250
- Maximum Switching Current: 3.00
- DC Voltage: 30
from Banner Engineering Corp.
Program in minutes with intuitive, easy-to-use configuration software. Up to eight expansion I/O modules can be added as automation requirements grow or change. Choose from six expansion module models. Expansion module models have a variety of safety inputs, solid-state safety outputs and safety... [See More]
- Type: Requires DC Power Supply
- Safety/Approvals Category: Category / Type 4
from elobau U.S., Inc.
A maximum of 32 sensors may be used with an interconnection system. We recommend the use of elobau interface units 363 098. [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- AC Voltage: 250
- Maximum Switching Current: 3.00
- DC Voltage: 30
from Banner Engineering Corp.
Monitors a variety of input devices such as e-stop buttons, rope pulls, enabling devices, protective safety stops, interlocked guards or gates, optical sensors, two-hand controls, and safety mats. Boolean logic functions for programming flexibility. Intuitive programming environment for easy... [See More]
- Type: Requires DC Power Supply
- Safety/Approvals Category: Category / Type 4
from elobau U.S., Inc.
A maximum of 8 sensors and 8 emergency stop buttons may be used with an interconnection system. We recommend for the sensors the use of elobau interface units 363 098. [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- AC Voltage: 250
- Maximum Switching Current: 3.00
- DC Voltage: 30
from Banner Engineering Corp.
22 input terminals can monitor both contact-based or PNP solid-state outputs from Banner devices or any other manufacturers. Each input can be a non-safety input, or configured for Control Reliability or Category 2, 3 or 4 safety circuit performance per ISO 13849-1. 3 pairs of solid-state safety... [See More]
- Type: Requires DC Power Supply
from elobau U.S., Inc.
A maximum of 32 sensors may be used with an interconnection system. We recommend the use of elobau interface units 363 098. [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- AC Voltage: 250
- Maximum Switching Current: 4.00
- DC Voltage: 30
from Banner Engineering Corp.
Overview. Non-safety monitoring of the Safety Controller I/O via Ethernet network communications, including Modbus/TCP, Ethernet I/P and PCCC. Uses an RJ45 Ethernet connector and standard or crossover-style cordsets to communicate via Ethernet communications protocols. 32 configurable virtual status... [See More]
- Type: Requires DC Power Supply
from elobau U.S., Inc.
A maximum of 16 sensors may be used with an interconnection system. We recommend the use of elobau interface units 363 098. [See More]
- Type: Requires DC Power Supply
- AC Voltage: 250
- Maximum Switching Current: 4.00
- DC Voltage: 30
from Banner Engineering Corp.
Modules work with Banner STB self-checking touch buttons or can be retrofitted with existing mechanical palm buttons to create a complete, ergonomic two-hand control system. To ensure reliability, modules have a diverse-redundant microcontroller circuit and multiple redundant, force-guided... [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- Mounting: DIN
from elobau U.S., Inc.
PLe according to EN ISO 13849-1. Four safety outputs (two separate safety circuits each with two safety outputs). Separate control outputs for further processing. Emergency stop function with short-circuit detection. Suitable for 2-hand control. Connection via codable, screwless terminals. Available... [See More]
- Type: Requires DC Power Supply
- AC Voltage: 250
- Maximum Switching Current: 3.00
- DC Voltage: 30
from Banner Engineering Corp.
Modules monitor up to 10 external devices for contact failure or wiring faults. Module goes into lockout mode if it detects a fault. Available voltages include 24V dc; 24V ac/dc; 115V ac or 12 to 24V dc; or 230V ac or 12 to 24V ac/dc. Modules monitor positive-opening E-stop and interlock switches. [See More]
- Type: Requires AC Power Supply; Requires DC Power Supply
- Mounting: DIN