Stainless Steel Preload Springs, Spacers, and Washers
from Smalley
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces. Among the major advantages, this design eliminates the need to keep... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.125
- Washer Type: Wave
- Outside Diameter: 0.188
from Zhejiang Lisheng Spring Co., Ltd.
Single-layer wave spring washer wave disc washer stainless steel/17-7PH (SUS631). Description: Wave washers, also referred to as wave springs, are wavy metal washers designed to provide a compensating spring force or absorb shock when under load. Many design variations have evolved to best serve... [See More]
- Material: StainlessSteel
- Inside Diameter: 6.000
- Washer Type: Wave
- Outside Diameter: 5.570
from Smalley
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces. Among the major advantages, this design eliminates the need to keep... [See More]
- Material: Spring Steel; Copper Alloy (optional feature); Copper (optional feature); Nickel Alloy (optional feature); StainlessSteel; Titanium (optional feature)
- Inside Diameter: 0.250
- Washer Type: Wave
- Outside Diameter: 0.375
from Zhejiang Lisheng Spring Co., Ltd.
Single turn wave disc springs wavy spring washers 17-7ph suppliers. Single turn overlap wave springs are used for several applications, mainly designed for short deflection and low to medium forces. Technology enables to provide a dependable and accurate fit. Overlap wave spring is a single turn... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.625
- Washer Type: Wave
- Outside Diameter: 0.480
from Smalley
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces. Among the major advantages, this design eliminates the need to keep... [See More]
- Material: Spring Steel; Copper Alloy (optional feature); Copper (optional feature); StainlessSteel; Titanium (optional feature)
- Inside Diameter: 0.450
- Washer Type: Wave
- Outside Diameter: 0.625
from Zhejiang Lisheng Spring Co., Ltd.
Round Section Wire Wave Spring Circular, Wave Circle Ripple Spring Coil. Description: Round-section wire wave rings springs are produced from round-section wire to provide higher loads while maintaining the accurate loading found in wave rings springs. As an alternative to Belleville Springs, the... [See More]
- Material: StainlessSteel
- Washer Type: Wave
from Smalley
Wavo Springs are produced from round-section wire to provide higher loads while maintaining the accurate loading found in wave springs. As an alternative to Belleville Springs, the Wavo provides similar loads but with an accurate, predictable spring rate. Advantages. Accurate high force loading with... [See More]
- Material: Spring Steel; StainlessSteel
- Inside Diameter: 0.408
- Washer Type: Wave
- Outside Diameter: 0.500
from Zhejiang Lisheng Spring Co., Ltd.
Single Turn Gap Wave Spring Wire Form For Bearing Pre Tightening. Description: Single turn gap wave springs are used for several applications, mainly designed for short deflection and low to medium forces. Technology enables to provide a dependable and accurate fit. The free ends of a gap wave... [See More]
- Material: StainlessSteel
- Washer Type: Wave
from Smalley
Conventional Gap and Overlap Type Wave Springs are used in a wide variety of applications. For short deflections and low-medium forces, they function with precision and dependability. These two types of Smalley Wave Springs permit radial expansion or growth in diameter within a cavity, without the... [See More]
- Material: Spring Steel; Copper Alloy (optional feature); Copper (optional feature); Nickel Alloy (optional feature); StainlessSteel
- Inside Diameter: 0.444
- Washer Type: Wave
- Outside Diameter: 0.630
from Smalley
Conventional Gap and Overlap Type Wave Springs are used in a wide variety of applications. For short deflections and low-medium forces, they function with precision and dependability. These two types of Smalley Wave Springs permit radial expansion or growth in diameter within a cavity, without the... [See More]
- Material: Spring Steel; Copper Alloy (optional feature); Copper (optional feature); Nickel Alloy (optional feature); StainlessSteel
- Inside Diameter: 3.401
- Washer Type: Wave
- Outside Diameter: 3.937
from ASRaymond
Stock sizes in high-carbon and stainless steels. Belleville spring washers are especially suited for high loads in small spaces. By combining them in varying sequence, each size gives numerous load-carrying possibilities. These washers have had all set removed during manufacture. Material. Spring... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.093
- Washer Type: Belleville
- Outside Diameter: 0.187
from TFC Ltd.
Dimensions: Metric. Material: A2 Stainless Steel. Finish: Self Colour [See More]
- Material: StainlessSteel
- Finish: Self Colour
from Temper Corporation
Temper Load Rings: Eliminate Shimming. Optimize Bearing Life. Improve Accuracy. Simplify Bearing Installation. Compress at a Constant Force. Applications: Hydraulic pumps. Speed reducers. Electric motors. Farm tractors. Mining equipment. Lawn mowers. Conveyors. Irrigation units. Compressors. Boat... [See More]
- Material: StainlessSteel
- Thickness: 0.070 to 0.120
- Washer Type: Constant Force Spacer
- Load: 430
from NSI Industries LLC
SPLIT TYPE. STAINLESS STEEL MATERIAL. 1/2 INCH FASTENER SIZE. APPLICATION LUG [See More]
- Material: StainlessSteel
from American Belleville
American Belleville washers hold your bolted joint tight in the face of the most extreme cases of differential thermal expansion/contractionn, bolt creep and vibration that threaten the integrity of the joint. We specialize in high-temperature applications and the most corrosive environments where... [See More]
- Material: StainlessSteel; 17/7PH Stainless Steel, 0.015" Thick
- Inside Diameter: 0.142
- Washer Type: Belleville
- Outside Diameter: 0.281
from Lee Spring Company
When your compression spring application requires a high load in a small space, Lee Spring ’s Belleville Washers can be the solution. Their conical configuration enables them to support high loads with relatively small deflections and solid heights compared to helical springs. Belleville... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.093
- Washer Type: Belleville
- Outside Diameter: 0.188
from L.H. Dottie Company
SPLIT TYPE. STAINLESS STEEL MATERIAL. #10 FASTENER SIZE. APPLICATION SCREWS AND BOLTS. LW MODEL [See More]
- Material: StainlessSteel
from G.L. Huyett
Very common spring with high load capacity but limited deflection. Will take an initial set when loaded to flat. Also known as conical washers or spring washers. [See More]
- Material: StainlessSteel; Carbon Steel
- Inside Diameter: 0.093 to 0.255
- Washer Type: Belleville
- Outside Diameter: 0.187 to 0.500
from ASRaymond
Stock sizes in music wire and stainless steel. Precision engineered curved washers are available from Associated Spring in many stock sizes. These washers are made of finely tempered spring steel with some sizes being made of stainless steel. They come deburred and have had all set removed during... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.100
- Washer Type: Bowed or Curved
- Outside Diameter: 0.215
from TFC Ltd.
Dimensions: mm. Material: A2 Stainless Steel. Finish: Self Colour [See More]
- Material: StainlessSteel
- Finish: Self Colour
from Lee Spring Company
Lee REDUX ™ Wave Springs - For Optimum Performance in Reduced Spatial Environments. REDUX ™ Wave Springs Now Available in Smaller Sizes. As assemblies get smaller, the demand for smaller REDUX Stainless Steel Wave Springs continues to grow. Lee ’s REDUX line now includes designs to... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.250
- Washer Type: Wave
- Outside Diameter: 0.224
from ASRaymond
Stock sizes in high-carbon and stainless steels. Wave spring washers are usually used in thrust-loading applications for small deflections, particularly where radial space is limited. A typical example is the axial loading of ball bearings. The spring rate is approximately linear between 20% and 80%... [See More]
- Material: StainlessSteel
- Inside Diameter: 0.134
- Washer Type: Wave
- Outside Diameter: 0.183
from TFC Ltd.
Dimensions: mm. Material: A4 Stainless Steel. Finish: Self Colour [See More]
- Material: StainlessSteel
- Finish: Self Colour