Micro-dispersion Industrial Lubricants
from Krytox™ Performance Lubricants
These greases are the standard lubricant for grease lubricated high temperature bearings in corrugator service. They provide protection from rusting, high temperature corrosion, and wear while maintaining excellent lubricity over a broad temperature range. Corrugator Krytox ™ 226 FG and 227 FG... [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 25.0 to 240.0
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 1.95
from Walter Surface Technologies
FOOD ZONE V ™ is an industrial-strength lubricant designed for heavy-duty applications and chain lubrication in food-manufacturing facilities. Foamy, non-drying formula adheres to surfaces and reduces friction, wear, and corrosion in heavy-loaded machinery. NSF category H1, registration... [See More]
- Type: Micro-dispersion
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®)
- Functions: Lubricant
- Features: Aerosol, Sprayable or Misting
from SKF/Global
SKF LGWM 1 is a low consistency mineral oil based grease, using a lithium soap and containing extreme pressure additives. It is extremely suitable for the lubrication of bearings operating under both radial and axial loads. Good oil film formation at low temperatures down to –30 °C (... [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 200.0
- Functions: Lubricant; Bearings
- Use Temperature: -22 to 230
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from M.J. Gordon Co.
With 45 years of Carnauba Wax Aerosol Mold Release formulating andpackaging experience, the M.J. GORDON Team has earned a reputation asthe "Aerosol Mold Release Specialists" supplying many of the world'smanufacturers of electronic and electrical equipment. GORDON'S Permasil Carnauba Wax Mold. [See More]
- Type: Micro-dispersion; Solid or Dry Film Lubricant
- Flash Point: -42
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Water Soluble / Emulsion; Wax / Stearate; Plant Oil or Animal Fat
from Aervoe Industries Incorporated
Fortified with Paratac, won't wash away or rub off, reduces wear [See More]
- Type: Fluid / Oil; Micro-dispersion
- Specific Gravity: 0.8300
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Use Temperature: 40 to 90
from Dupont Molykote
Air-curing dry lubricant. Air dry, water-dilutable coating good for initial run-in applications. APPLICATIONS. Sliding coating of metal/metal combinations with slow to moderately fast movements and high loads. Suitable for improving the running-in of gearboxes, sliding bearings and sliding guides. [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Micro-dispersion; Solid or Dry Film Lubricant; Anti-Friction Coating
- Specific Gravity: 1.16
- Functions: Lubricant
- Use Temperature: -94 to 392
from Nylok Corporation
Nyplate ® coating is a film-forming dispersion with mineral solid lubricants for coating threaded fasteners requiring a high preload on assembly without galling but after exposure to high temperature permit an easy and non-destructive disassembly. Advantages. Ideal for preventing galling on... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Micro-dispersion; Solid or Dry Film Lubricant
- Use Temperature: -76 to 1292
- Functions: Lubricant
from Royal Purple, Ltd.
Thermasil ™ T-100 is a viscous, water resistant, tacky grease designed to protect extremely heavily loaded, low speed bearings or sliding surfaces (such as open gears, skid-rails, gear couplings, etc.) that operate in wet or hot environments where other EP greases perform poorly or even fail. [See More]
- Type: Grease / Gel; Micro-dispersion; Maximum Load Silica Gel Grease
- Kinematic Viscosity: 4866.0
- Functions: Lubricant; Bearings; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 110
from McGee Industries, Inc. / McLube Division
McLube 76C is a water emulsion that dries to a clear coating with excellent release and antistick characteristics. It is intended for use as a release coating on all types of concrete forms. It has superior wetting properties on metal forms and plastic liners used for the molding of concrete parts. [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Water Soluble / Emulsion
from SantoLubes LLC
SANTOLUBE EP-2 Lubricating Grease is a high traction, high temperature grease with excellent thermal and mechanical stability. This grease is recommended for applications requiring operation at high temperatures, where high coefficient of traction is necessary. SANTOLUBE EP-2 grease maintains high... [See More]
- Type: Grease / Gel; Micro-dispersion
- Composition / Chemistry: Straight Oil (Non-soluble); Synthetic or Semi-synthetic; Lithium Complex or Soap Thickener
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Features: High Temperature Applications
from Walter Surface Technologies
CHAIN GANG ™ is a high-performance synthetic lubricant that lasts longer than traditional lubricants. Effectively penetrates fine pins and bushings to seal out dust, dirt, water, and other contaminants. Provides excellent protection and enhances the life of any machinery that uses chains or... [See More]
- Type: Micro-dispersion; Penetrant or Penetrating Oil
- Use Temperature: -4 to 482
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Composition / Chemistry: Molybdenum or Metal Sulphide
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from M.J. Gordon Co.
With 45 years of Carnauba Wax Aerosol Mold Release formulating andpackaging experience, the M.J. GORDON Team has earned a reputation asthe "Aerosol Mold Release Specialists" supplying many of the world'smanufacturers of electronic and electrical equipment. GORDON'S Permasil Carnauba Wax Mold. [See More]
- Type: Micro-dispersion; Solid or Dry Film Lubricant
- Composition / Chemistry: Wax / Stearate; Plant Oil or Animal Fat
- Functions: Lubricant; Release Agent or Mold Release
- Industry Applications: Electrical / Electronic
from Dupont Molykote
Air-Curing Dry Lubricant. Air drying water-based coating for light loads and anti-squeak properties. Applications. Reduces or eliminates noise of plastic parts e.g. in automotive applications such as door panes, arm rests, dashboards, glove boxes, etc., as well as leather equipment. Suitable for... [See More]
- Type: Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1.3
- Functions: Lubricant
- Use Temperature: -40 to 176
from McGee Industries, Inc. / McLube Division
Petroleum Oil Based Extreme Pressure Anti-Seize Paste containing a high concentration of molybdenum disulfide. Provides superior extreme pressure properties, high-load bearing capabilities, protects against corrosion, is water resistance, and has excellent oxidation and mechanical stability. Has... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Grease / Gel; Micro-dispersion
- Specific Gravity: 2.01
- Functions: Lubricant
- Use Temperature: 750
from Walter Surface Technologies
BOLT-OUT ™ is a heavy-duty, non-chlorinated liquid solution that penetrates and lubricates to efficiently free seized parts while inhibiting further rust. Works well in a wide range of temperatures. Features. Contains microscopic moly particles for excellent lubricity. Nonflammable,... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Micro-dispersion; Penetrant or Penetrating Oil
- Use Temperature: -4 to 482
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Composition / Chemistry: Molybdenum or Metal Sulphide
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from M.J. Gordon Co.
With 45 years of Carnauba Wax Aerosol Mold Release formulating andpackaging experience, the M.J. GORDON Team has earned a reputation asthe "Aerosol Mold Release Specialists" supplying many of the world'smanufacturers of electronic and electrical equipment. GORDON'S Permasil Carnauba Wax Mold. [See More]
- Type: Micro-dispersion; Solid or Dry Film Lubricant
- Composition / Chemistry: Wax / Stearate; Plant Oil or Animal Fat
- Functions: Lubricant; Release Agent or Mold Release
- Industry Applications: Electrical / Electronic
from Dupont Molykote
Extremely pure, solid lubricant paste for bolted joints. It contains no lead, nickel, sulphur, chlorine or fluorine. Prevents seize of austenite steel and high nickel chromium steel alloy screws used at high temperatures. APPLICATIONS. Suitable for screws, nuts and bolts that are subjected to... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Grease / Gel; Micro-dispersion
- Specific Gravity: 1.21
- Functions: Lubricant
- Use Temperature: -22 to 2552
from McGee Industries, Inc. / McLube Division
Water soluble polyol dispersion specially designed for EPDM, Neoprene and Vamac compounds. MAC-956 provides excellent lubricity for loading and unloading formed hose. [See More]
- Type: Fluid / Oil; Micro-dispersion
- Specific Gravity: 1.1
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Water Soluble / Emulsion; Specialty, Proprietary or Other; Polyols
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from Dupont Molykote
Synthetic grease with solid lubricants. Chain and open gear lubricant. APPLICATIONS. Used for initial lubrication of chains with hollow pins equipped with grease nipples. e.g. high tenter clamp chains in the textile industry and conveyor chains in food sterilizer units. Also used for gear drives and... [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 1500.0
- Functions: Lubricant; Bearings
- Specific Gravity: 0.9500
from McGee Industries, Inc. / McLube Division
Solvent based bonded dry film molybdenum disulfide lubricant and coating that will bond tenaciously to all surfaces. Provides excellent lubricity and a low coefficient of friction (0.03). Molybdenum disulfide has a load carrying capacity from 225,000 psi to 500,000 psi, beyond the yield strength of... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.9000
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Use Temperature: 750
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from Dupont Molykote
Air dry coating for high temperature and high load applications (MRO & OEM). Dry film lubricant for components used intermittently or those exposed to unusual environments. USES. Molykote ® 321 Dry Film Lubricant is designed for use on parts that are. inaccessible for lubrication after... [See More]
- Type: Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.9700
- Functions: Lubricant; Metal Cutting; Metal Forming
- Use Temperature: -288 to 842
from McGee Industries, Inc. / McLube Division
McLube 2100 is a colloidal dispersion of finely divided polytetrafluoroethylene (PTFE) particles in water. It has proven an excellent release and anti-stick coating for a variety of rubber compounds and plastic parts. [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1.01
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Water Soluble / Emulsion
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from Dupont Molykote
Mineral oil grease especially for metal/metal combinations. Molykote ® Longterm 2/78G is a mineral oil, lithium/zinc soap grease containing specially formulated solid lubricants plus oxidation and corrosion inhibitors. APPLICATIONS. Designed for plain and anti-friction bearings as well as other... [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 105.0
- Functions: Lubricant; Bearings; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 0.9010
from McGee Industries, Inc. / McLube Division
MAC-863 is water based mixture of a polymeric resin supplied as a concentrate, which has proven to be an extremely effective anti-stick coating for uncured rubber stock. It furnishes a thin, colorless coating that can be used with black and colored stock and will not contaminate the rubber stock. It... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion
- Specific Gravity: 1.01
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Water Soluble / Emulsion
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from Dupont Molykote
Silicone grease with solid lubricants. APPLICATIONS. Especially suited for the low friction operation of most rubber or plastic parts such as: Bearing bushings, gears and chains. Sealing rings, sliding tracks and switches. Flexible control cables. Which are typically found in: Bowden cable control... [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 200.0
- Functions: Lubricant; Bearings; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 1.02
from McGee Industries, Inc. / McLube Division
McLube 1829 is a concentrated release agent and anti-stick coating designed for use in the plastics industry. This product is a clean, economical alternative to silicone oil, soap and other low-tech releasing agents. [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1.01
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Water Soluble / Emulsion
from Magnalube, Inc.
Magnalube-G PTFE grease will ultimately reduce the costs associated with maintenance, part replacement, and new machinery by reducing wear and protecting sensitive parts in a wide range of demanding applications. Magnalube-G PTFE Grease deposits a fine, protective and lubricating film on metal... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; BoundaryLubricant PTFE,ElastomerThickend
- Kinematic Viscosity: 165.0 to 180.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 95
from Dupont Molykote
Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads. APPLICATIONS. Used successfully for bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks. [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 265.0
- Functions: Lubricant; Bearings; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 0.9000
from McGee Industries, Inc. / McLube Division
McLube PTFE Dry Film Dispersions have a low coefficient of friction allowing for a dry film lubricant with super performance attributes such as thermal and chemical stability, cleanliness and excellent slip-stick properties. PTFE Dry Film Dispersions are available as 25%, 15%, and 5% dispersions in... [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.8100 to 0.9400
- Functions: Lubricant
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Specialty, Proprietary or Other; Alcohol Based
from Magnalube, Inc.
Magnalube-GX grease is composed of a lithium-complex thickener infused with functional polymers for better adhesion in wet environments and better performance at higher temperatures. This composition is blended carefully with high viscosity base oils to give the product exceptional film strength and... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; Boundary Lubricant Molybdenum and PTFE
- Kinematic Viscosity: 327.0 to 350.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 80
from Dupont Molykote
High Temperature Copper Paste. Copper paste for components subjected to high temperatures, high pressures and corrosive influences. Molykote ® Cu-7439 is a long term lubricant for machine components which are exposed to high loads, high temperatures and corrosive environments. The paste exhibits... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 100.0 to 1100.0
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 0.9900
from McGee Industries, Inc. / McLube Division
Solvent based bonded dry film moly and PTFE lubricant coating containing molybdenum disulfide (MoS2) and PTFE solid lubricants. Provides excellent lubricity and durability by producing a hard, dry, durable coating for all metal surfaces which may be exposed to moisture, reactive chemicals or active... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.8300
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Molybdenum or Metal Sulphide; Specialty, Proprietary or Other; Solvent Based
from Magnalube, Inc.
Magnalube-GX grease is composed of a lithium-complex thickener infused with functional polymers for better adhesion in wet environments and better performance at higher temperatures. This composition is blended carefully with high viscosity base oils to give the product exceptional film strength and... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; Boundary Lubricant Molybdenum and PTFE
- Kinematic Viscosity: 327.0 to 350.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 80
from Dupont Molykote
Silicone grease for brake caliper pins and ball joints. Molykote ® G-807 Low Friction Silicone Compound is a soft silicone compound containing specially formulated solid lubricants. It has excellent compatibility with plastics and rubber materials. It also has good corrosion resistance and low... [See More]
- Type: Grease / Gel; Micro-dispersion
- Specific Gravity: 1.15
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Use Temperature: -40 to 302
from McGee Industries, Inc. / McLube Division
PTFE-based dry lubricant and mold release designed to enhance mold flow characteristics. [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.7800
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Specialty, Proprietary or Other; Solvent Based
from Magnalube, Inc.
Magnalube-GX grease is composed of a lithium-complex thickener infused with functional polymers for better adhesion in wet environments and better performance at higher temperatures. This composition is blended carefully with high viscosity base oils to give the product exceptional film strength and... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; Boundary Lubricant Molybdenum and PTFE
- Kinematic Viscosity: 327.0 to 350.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 80
from Dupont Molykote
Extreme-pressure lubricant for assembly, press fitting, threaded connections, running-in and maintenance. Applications. Molykote ® G-n Metal Assembly Paste lubricates surfaces subjected to extreme pressures. Specific applications include: Running-in lubricant - for new or rebuilt equipment, such... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Grease / Gel; Micro-dispersion
- Specific Gravity: 1.33
- Functions: Lubricant; Metal Forming; Corrosion Inhibiting or Rust Preventative
- Use Temperature: -0 to 750
from McGee Industries, Inc. / McLube Division
McLube 1720L (NSN 9150-01-325-9816)is a solvent dispersion of a solid active ingredient with exhibits low friction and excellent antistick/release characteristics. McLube 1720L furnishes a release coating for all types of rubber and plastic and works equally well on metallic and nonmetallic molds at... [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.8100
- Functions: Lubricant; Release Agent or Mold Release
- Use Temperature: 550
from Magnalube, Inc.
Magnalube-GX grease is composed of a lithium-complex thickener infused with functional polymers for better adhesion in wet environments and better performance at higher temperatures. This composition is blended carefully with high viscosity base oils to give the product exceptional film strength and... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; Boundary Lubricant Molybdenum and PTFE
- Kinematic Viscosity: 327.0 to 350.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 80
from Dupont Molykote
High performance grease with solid lubricants for metal/metal combinations involving slow to fast movements, particularly with medium to high loads. APPLICATION. Used successfully on roller bearings, plain bearings, sliding guides, roller guides, ball-and-socket joints, splined shafts and threaded... [See More]
- Type: Grease / Gel; Micro-dispersion
- Kinematic Viscosity: 114.0
- Functions: Lubricant; Bearings; Corrosion Inhibiting or Rust Preventative
- Specific Gravity: 0.8900
from McGee Industries, Inc. / McLube Division
MAC-841 is a water emulsion of a film forming resin that cures to form a clear, colorless coating with excellent release and antistick characteristics. It is intended for use as a release coating for Engineered Wood Molds. [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1
- Functions: Lubricant; Release Agent or Mold Release
- Use Temperature: 1000
from Magnalube, Inc.
Magnalube-GX grease is composed of a lithium-complex thickener infused with functional polymers for better adhesion in wet environments and better performance at higher temperatures. This composition is blended carefully with high viscosity base oils to give the product exceptional film strength and... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; Boundary Lubricant Molybdenum and PTFE
- Kinematic Viscosity: 327.0 to 350.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 80
from Dupont Molykote
Soft white extreme pressure paste for long term lubrication. A white grease paste suited for long-term lubrication for metal parts and for assemblies. Applications. Sliding surfaces and friction contacts exposed to heavy loads, requiring "clean" lubrication, especially at low to medium speeds. For... [See More]
- Type: Grease / Gel; Micro-dispersion
- Specific Gravity: 1.1
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Use Temperature: -13 to 257
from McGee Industries, Inc. / McLube Division
Water based mold release agent supplied as a concentrate. PTFE colorless water based dispersion for general purpose and hard to release compounds. Excellent mold release agent for FKM, ECO, neoprene, and other organic rubber compounds and parts. [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1
- Functions: Lubricant; Release Agent or Mold Release
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Water Soluble / Emulsion
from Magnalube, Inc.
Magnalube-GX grease is composed of a lithium-complex thickener infused with functional polymers for better adhesion in wet environments and better performance at higher temperatures. This composition is blended carefully with high viscosity base oils to give the product exceptional film strength and... [See More]
- Type: Fluid / Oil; Grease / Gel; Micro-dispersion; Boundary Lubricant Molybdenum and PTFE
- Kinematic Viscosity: 327.0 to 350.0
- Functions: Lubricant; Sealing, Intrusion Barrier, Seal Forming or Sealant; Bearings; Release Agent or Mold Release; Compressors; Corrosion Inhibiting or Rust Preventative
- Viscosity Index: 80
from Dupont Molykote
Heavy duty lubricating synthetic paste with excellent load-carrying capacity and wear resistance. A high load/high-wear durability paste based on a synthetic oil, developed specifically for plastic components. Applications. Automobiles, electrical appliances, precision equipment, audio equipment,... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Grease / Gel; Micro-dispersion
- Specific Gravity: 1.18
- Functions: Lubricant; Bearings
- Use Temperature: -58 to 302
from McGee Industries, Inc. / McLube Division
MAC-799 is an aqueous dispersion of finely divided particles of PTFE (polytetrafluoroethylene). It will air cure in minutes providing a dry, colorless film with excellent lubricating properties and a low coefficient of friction. [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1.02
- Functions: Lubricant
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Water Soluble / Emulsion
from Dupont Molykote
Silicone grease especially for brake pad shim. Molykote ® AS-880N Grease is a silicone oil/silica thickened grease containing specially formulated solid lubricants. It will remain serviceable at temperatures from -40 ° to 204 °C (-40 ° to 400 °F). TYPICAL APPLICATIONS. Molykote... [See More]
- Type: Grease / Gel; Micro-dispersion
- Specific Gravity: 1.15
- Functions: Lubricant
- Use Temperature: -40 to 400
from McGee Industries, Inc. / McLube Division
Solvent based dispersion of Polytetrafluoroethylene (PTFE). Produces a dry colorless film with a very low coefficient of friction and excellent lubricating properties. Provides excellent mandrel ejection on a variety of hose constructions and compounds. [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.8600
- Functions: Lubricant
- Composition / Chemistry: Fluoropolymer / PTFE (e.g., Teflon®); Specialty, Proprietary or Other; Solvent Based
from Dupont Molykote
Solid lubricating paste with particularly low friction coefficient for assembly and running-in of metallic components. Applications. Suitable for the press-fit production of all types of machine elements, as a running-in lubricant for new machines and gears, as permanent lubrication of machine... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Grease / Gel; Micro-dispersion
- Specific Gravity: 1.4
- Functions: Lubricant; Bearings; Metal Cutting; Corrosion Inhibiting or Rust Preventative
- Use Temperature: -31 to 842
from McGee Industries, Inc. / McLube Division
Food Grade Mandrel Lubricant. Solvent based dispersion of polyermeric material that will provide a durable, dry, colorless film with a very low coefficient of friction and excellent lubricating properties. Allows for the easy removal of mandrel built hose products. Performs extremely well as a... [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.7200
- Functions: Lubricant
- Composition / Chemistry: Specialty, Proprietary or Other; Solvent Based Dispersion Of Polyermeric Material
from Dupont Molykote
High temperature copper thread paste. Solid lubricant paste; contains no lead or nickel. Applications. For metal/metal combinations that are subjected to high temperatures and frictional contacts which, typically for bolted joints, are free from lead or nickel. Suitable for lubrication points with... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Micro-dispersion; Solid or Dry Film Lubricant; Electrically Conductive
- Specific Gravity: 1.4
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Use Temperature: -22 to 2012
from McGee Industries, Inc. / McLube Division
This silicone mold release is suitable for food-grade applications. It can be used on metallic and nonmetallic surfaces and provides excellent release for all polymers: plastic, rubber, urethane and composite. 1850 is also an effective lubricant. [See More]
- Type: Fluid / Oil; Micro-dispersion
- Specific Gravity: 0.7000
- Functions: Lubricant; Release Agent or Mold Release
- Use Temperature: 600
from Dupont Molykote
Solid lubricant paste with silicone carrier oil. Applications. Suitable for lubrication points with low to moderate loads and low speeds which are subjected to water and extreme temperatures. At temperatures above 230C (446F), the carrier volatilizes leaving virtually no residue, and the remaining... [See More]
- Type: Grease / Gel; Micro-dispersion; Solid or Dry Film Lubricant
- Kinematic Viscosity: 125.0
- Functions: Lubricant
- Specific Gravity: 1.95
from McGee Industries, Inc. / McLube Division
Solvent based bonded dry film molybdenum disulfide (MoS2) lubricant and coating that will bond tenaciously to all surfaces. Provides excellent lubricity and a low coefficient of friction (0.03). Molybdenum disulfide has a load carrying capacity from 225,000 upwards to 500,000 psi, beyond the yield... [See More]
- Type: Anti-Seize Compound or Thread Lubricant; Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 1.02
- Functions: Lubricant; Corrosion Inhibiting or Rust Preventative
- Use Temperature: 750
from McGee Industries, Inc. / McLube Division
McLube 1733H is a solvent dispersion of PTFE that dries in seconds and leaves a durable, colorless coating with excellent release and anti-stick characteristics. The coating is flexible and particularly suited for use on nonmetallic molds such as epoxy, polyester, and silicone. This product will... [See More]
- Type: Fluid / Oil; Micro-dispersion; Solid or Dry Film Lubricant
- Specific Gravity: 0.7300
- Functions: Lubricant; Release Agent or Mold Release
- Use Temperature: 550