Live / Driven Tool Holders
from Precision Components
#25 ER Solid Extensions [See More]
- Live Static: Live / Driven
from Melin Tool Company
END MILL HOLDERS CAT40 AND CAT50 STUB, STANDARD, AND LONG LENGTHS [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
- Type: End Mill Holder
- Projection Length: 1.38 to 7
from WhizCut of Sweden AB
AST| Height Adjustable Toolholders for Back Working SubSpindle Turning. WhizCut has introduced a new toolholder system, WhizAdjust, that allows very quick and easy height adjustment without losing in stability. This makes it perfect for threading against the sub spindle. To achieve best performance... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
from Sandvik Coromant Co.
With the best pull-out security on the market, this chuck is designed to eliminate vibration for excellent stability and accessibility in all milling and drilling operations. Covering all machine interfaces, CoroChuck ™ 930 helps to maintain efficient production through quick and easy tool... [See More]
- Live Static: Live / Driven
- Mounting Style: BT (optional feature); CAT® (optional feature); ISO (optional feature)
- Type: Hydraulic
- Projection Length: 3.03 to 7.68
from Precision Components
#32 ER Solid Extensions [See More]
- Live Static: Live / Driven
from Melin Tool Company
WELER MILLING CHUCK FOR HIGH PERFORMANCE MILLING. Excellent for today ’s higher spindle speeds and carbide tooling versus the older style side lock set screw end mill holders. Over 350 ft/lb of clamping force. Balanced to G2.5 @20,000 RPM. Slim nose design. No needle bearings. .0001 ”... [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
- Type: Milling Chuck
- Projection Length: 0.9060 to 2.52
from WhizCut of Sweden AB
To achieve best performance when threading small parts it is important to choose the correct helix angle of your tool holder. The WhizThread tool holders are available with a 2 ° and 4 ° helix angle. The below table shows what tool holder to use depending on what the pitch and diameter of... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 4.92 to 5.91
from Sandvik Coromant Co.
Since tapping operations are critical the security and quality is important. To achieve a top result, not only the tapping tool is important, but also the tool holder. The new versatile CoroChuck ™ 970 is designed for a stable and precise tapping process in all materials. Benefits. Improves... [See More]
- Live Static: Live / Driven
- Mounting Style: BT (optional feature); Capto® (optional feature); CAT® (optional feature); HSK (optional feature); ISO (optional feature)
- Type: Tapping Chucks
- Special Features: Coolant Fed
from Precision Components
BT-30 End Mill Extensions [See More]
- Live Static: Live / Driven
- Mounting Style: BT
- Type: End Mill Holder
from WhizCut of Sweden AB
To achieve best performance when threading small parts it is important to choose the correct helix angle of your tool holder. The WhizThread tool holders are available with a 2 ° and 4 ° helix angle. The below table shows what tool holder to use depending on what the pitch and diameter of... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 4.92
from Precision Components
BT-30 Tap Drivers [See More]
- Live Static: Live / Driven
- Mounting Style: BT
from WhizCut of Sweden AB
To achieve best performance when threading small parts it is important to choose the correct helix angle of your tool holder. The WhizThread tool holders are available with a 2 ° and 4 ° helix angle. The below table shows what tool holder to use depending on what the pitch and diameter of... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 4.92
from Precision Components
BT-40 End Mill Extensions [See More]
- Live Static: Live / Driven
- Mounting Style: BT
- Type: End Mill Holder
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. DSJ. Round shank... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 5.91
from Precision Components
BT-40 Metrics [See More]
- Live Static: Live / Driven
- Mounting Style: BT
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. AHJ| Height... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
from Precision Components
BT-50 End Mill Extensions [See More]
- Live Static: Live / Driven
- Mounting Style: BT
- Type: End Mill Holder
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. WSJ. Tool holder... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 4.92 to 5.91
from Precision Components
CAT-40 End Mill Extensions [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
- Type: End Mill Holder
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. WPJ Coolant... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Special Features: Coolant Fed
from Precision Components
CAT-40 Metric Shank Tap Drivers [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. WSJ Coolant... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Special Features: Coolant Fed
from Precision Components
CAT-40 Metrics [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. ZSJ. Tool holder... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 4.92
from Precision Components
CAT-40 Standard Balanced [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
from WhizCut of Sweden AB
The J-type tooling setup is optimized for straight turning, copy turning, groove turninga and profile turning. The J-type inserts are available in many variations to enable the most suitable combination of cutting rakes, shapes, corner executions, chip control and grades of carbide. WPJ. Tool holder... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 3.35 to 4.92
from Precision Components
CAT-45/BT-45 End Mill Extensions [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
- Type: End Mill Holder
from WhizCut of Sweden AB
The K-type inserts are used for back turning, threading, grooving and parting off. WhizCut wide range of inserts for these applications making it possible to always get the correct insert for the application. AHK | Height Adjustable Tool Holder. WhizCut has introduced a new toolholder system,... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
from Precision Components
CAT-50 End Mill Extensions [See More]
- Live Static: Live / Driven
- Mounting Style: CAT®
- Type: End Mill Holder
from WhizCut of Sweden AB
The K-type inserts are used for back turning, threading, grooving and parting off. WhizCut wide range of inserts for these applications making it possible to always get the correct insert for the application. WSK | Left hand Tool holder with Insert in Center. Left hand tool holder with center-lock... [See More]
- Live Static: Live / Driven
- Mounting Style: Custom Fit, Center Screw
- Type: End Mill Holder
- Projection Length: 4.92