EMI Filtering IC Electronic Filters
from Picor Corporation
Description. The QPI-10 includes the total Hot-Swap function with an EMI filter for V •I Chip applications. The product aligns with the AdvancedTCA ™ PICMG3.0 ® requirements for hot insertion and board level conducted noise limitations. The EMI filter provides conducted common-mode... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 36 to 76
from Universal Semiconductor, Inc.
Integrated thin film resistor capacitor diode network termination products are built on silicon substrates. USI's thin film resistors, capacitors and diodes are fabricated using proprietary, state-of-the-art thin film technology that offers high performance at very high frequencies in compact QSOP... [See More]
- Applications: General; EMI Filtering
- Filter Type: Low Pass
- Filter Category: Passive Filter
- Filter Class: Continuous
from Picor Corporation
Description. The QPI-11 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise of the Vicor V •I Chip products to comply with the CISPR22 standard requirements for conducted noise measurements. The filter is designed to operate up to 36 Vdc... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 5 to 50
from Picor Corporation
Description. The QPI-12 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise comply with the CISPR22 standard requirements for conducted noise measurements. The filter is designed to operate up to 76 Vdc and supports 7A loads up to 60 °C... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 5 to 80
from Picor Corporation
Description. The QPI-3 active EMI filter attenuates conducted common-mode(CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 24 Vdc bus (10 – 40 Vdc). The QPI-3 ’s 7 A rating supports multiple DC-DC converter... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 10 to 40
from Picor Corporation
Description. The QPI-4 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 48 Vdc bus (36 – 76 Vdc).The QPI-4's 7 A rating supports multiple DC-DC converter loads up... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 30 to 80
from Picor Corporation
Description. The QPI-5 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 24 Vdc bus (10 – 40 Vdc). The QPI-5 ’s 14 A rating supports multiple DC-DC converter... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 10 to 40
from Picor Corporation
Description. The QPI-6 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 48 Vdc bus (36 – 76 Vdc). The QPI-6 ’s 14 A rating supports multiple DC-DC converter... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 30 to 80
from Picor Corporation
Description. The QPI –7 is the low voltage version of the QPI-8 SiP product that includes the total Hot-Swap function withan EMI filter for DC-DC converter applications. The EMI filter provides active conducted common-mode (CM) and differential-mode (DM) noise attenuation over the CISPR22... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 18 to 36