General IC Electronic Filters
from DigiKey
IC FILTER 3.5-50MHZ LOPASS 32SMT [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 4.75 to 5.25
from DigiKey
Band Pass Filter IC Band Pass Order 24-SMT (4x4) [See More]
- Applications: General
- Filter Type: Band Pass
- Filter Category: Active Filter
- Package Type: 24-VFQFN Exposed Pad
from DigiKey
Band Pass Filter IC Band Pass Order 24-QFN (4x4) [See More]
- Applications: General
- Filter Type: Band Pass
- Filter Category: Active Filter
- Package Type: 24-VFQFN Exposed Pad
from DigiKey
IC FILTER LOW PASS 16QFN [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Package Type: 16-VFQFN Exposed Pad
from DigiKey
IC FILTER 25KHZ BUTTER 8SOIC [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
IC FILTER 15KHZ LOWPASS 8UMAX [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
IC FILTER 40KHZ SWITCHED 16QSOP [See More]
- Applications: General
- Filter Type: Universal
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
Butterworth, Low Pass Switched Capacitor Filter IC Butterworth, Low Pass Switched Capacitor 4th Order 30kHz 8-SOIC [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
Digital Filter IC Digital Order 160-BGA (15x15) [See More]
- Applications: General
- Supply Voltage (VS): 3.1 to 3.5
- Filter Category: Active Filter; Digital Filter
- Package Type: 160-BGA
from DigiKey
Digital Filter IC Digital Order 160-QFP (28x28) [See More]
- Applications: General
- Supply Voltage (VS): 3.1 to 3.5
- Filter Category: Active Filter; Digital Filter
- Package Type: 160-BQFP
from DigiKey
Digital Filter IC Digital Order 40-VQFN (6x6) [See More]
- Applications: General
- Supply Voltage (VS): 2.4 to 5.5
- Filter Category: Active Filter; Digital Filter
- Package Type: 40-VFQFN Exposed Pad
from DigiKey
Universal Switched Capacitor Filter IC Universal Switched Capacitor 4th Order 100kHz 20-SOIC [See More]
- Applications: General
- Filter Type: Universal
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
COMMON-MODE ACTIVE EMI FILTER FO [See More]
- Applications: General
- Supply Voltage (VS): 8 to 16
- Filter Category: Active Filter
- Fc: 150 to 3000
from DigiKey
Filter IC Order 36-QFN (5x5) [See More]
- Applications: General
- Supply Voltage (VS): 1 to 1.8
- Filter Category: Active Filter
- Package Type: 36-VFQFN Exposed Pad
from DigiKey
SD/ED/HD Filter IC SD/ED/HD 5th Order 38-TSSOP [See More]
- Applications: General
- Filter Type: SD/ED/HD
- Filter Category: Active Filter
- Supply Voltage (VS): 3.3 to 5
from DigiKey
Band Pass Filter IC Band Pass Order 7GHz ~ 16GHz 40-LFCSP (6x6) [See More]
- Applications: General
- Filter Type: Band Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 5.5
from DigiKey
Band Pass Filter IC Band Pass Order 11GHz ~ 20GHz 24-LFCSP (4x4) [See More]
- Applications: General
- Filter Type: Band Pass
- Filter Category: Active Filter
- Fc: 1.10E7 to 2.00E7
from DigiKey
1250 TO 2600 MHZ TUNABLE BPF [See More]
- Applications: General
- Filter Type: Band Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 3.2 to 3.4
from DigiKey
Low Pass Filter IC Low Pass Order 3.95GHz ~ 6.9GHz 32-LFCSP (5x5) [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 0.0 to 14
from DigiKey
Antialiasing Filter IC Antialiasing 2nd Order 5MHz 8-MSOP [See More]
- Applications: General
- Filter Type: Antialiasing
- Filter Category: Active Filter
- Supply Voltage (VS): 2.7 to 12
from DigiKey
Band Pass Filter IC Band Pass 2nd Order 200kHz 16-SSOP [See More]
- Applications: General
- Filter Type: Band Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.7 to 11
from DigiKey
Universal Switched Capacitor Filter IC Universal Switched Capacitor 4th Order 30kHz 20-PDIP [See More]
- Applications: General
- Filter Type: Universal
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
Butterworth, Low Pass Switched Capacitor Filter IC Butterworth, Low Pass Switched Capacitor 5th Order 20kHz 16-SO [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
Bessel, Low Pass Switched Capacitor Filter IC Bessel, Low Pass Switched Capacitor 8th Order 95kHz 14-PDIP [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from DigiKey
Bessel, Low Pass Switched Capacitor Filter IC Bessel, Low Pass Switched Capacitor 8th Order 50kHz 18-SO [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from Universal Semiconductor, Inc.
Integrated thin film resistor capacitor diode network termination products are built on silicon substrates. USI's thin film resistors, capacitors and diodes are fabricated using proprietary, state-of-the-art thin film technology that offers high performance at very high frequencies in compact QSOP... [See More]
- Applications: General; EMI Filtering
- Filter Type: Low Pass
- Filter Category: Passive Filter
- Filter Class: Continuous
from Encore Electronics, Inc.
The Model 721 is a modular two-channel rack mounted lowpass filter. Each module contains two independent signal channels. One of five frequency cutoffs,or filter bypass, is selected with a front panel rotary switch for each channel. The Model 721M adds switch-selectable gain of 1, 10, or 100. [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): -10 to 10
from Thin Film Technology Corporation
Low pass surface mount filter designed for cost effective use [See More]
- Applications: General
- Filter Type: Low Pass
- Filter Category: Active Filter
- Source Current (IS): 100
from Picor Corporation
Description. The QPI-10 includes the total Hot-Swap function with an EMI filter for V •I Chip applications. The product aligns with the AdvancedTCA ™ PICMG3.0 ® requirements for hot insertion and board level conducted noise limitations. The EMI filter provides conducted common-mode... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 36 to 76
from Encore Electronics, Inc.
The Model FL724 notch-reject filter can be configured for up to 55dB of signal rejection at 60Hz or 50Hz. The unit operates from a ±15VDC, 25mA regulated power sourcewhich is available as a matching module (Model FL854). [See More]
- Applications: General
- Filter Type: Band Reject
- Filter Category: Active Filter
- Filter Class: Switched Capacitor
from Picor Corporation
Description. The QPI-11 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise of the Vicor V •I Chip products to comply with the CISPR22 standard requirements for conducted noise measurements. The filter is designed to operate up to 36 Vdc... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 5 to 50
from Picor Corporation
Description. The QPI-12 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise comply with the CISPR22 standard requirements for conducted noise measurements. The filter is designed to operate up to 76 Vdc and supports 7A loads up to 60 °C... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 5 to 80
from Picor Corporation
Description. The QPI-3 active EMI filter attenuates conducted common-mode(CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 24 Vdc bus (10 – 40 Vdc). The QPI-3 ’s 7 A rating supports multiple DC-DC converter... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 10 to 40
from Picor Corporation
Description. The QPI-4 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 48 Vdc bus (36 – 76 Vdc).The QPI-4's 7 A rating supports multiple DC-DC converter loads up... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 30 to 80
from Picor Corporation
Description. The QPI-5 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 24 Vdc bus (10 – 40 Vdc). The QPI-5 ’s 14 A rating supports multiple DC-DC converter... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 10 to 40
from Picor Corporation
Description. The QPI-6 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 48 Vdc bus (36 – 76 Vdc). The QPI-6 ’s 14 A rating supports multiple DC-DC converter... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 30 to 80
from Picor Corporation
Description. The QPI –7 is the low voltage version of the QPI-8 SiP product that includes the total Hot-Swap function withan EMI filter for DC-DC converter applications. The EMI filter provides active conducted common-mode (CM) and differential-mode (DM) noise attenuation over the CISPR22... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 18 to 36
from Picor Corporation
Description. The QPI-8 is the industry ’s first System-in-Package (SiP) designed to integrate a total Hot-Swap function with an active EMI filter. The product aligns with the AdvancedTCA ™ PICMG ® 3.0 ‚ requirements for hot insertion and board level conducted noise limitations. [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 36 to 76
from Picor Corporation
Description. The QPI-9 includes the total Hot-Swap function along with an EMI filter for V •I Chip applications. The EMI filter is designed to attenuate the conducted common-mode (CM) and differential-mode (DM) noise generated by the higher switching frequencies of the V •I Chips. The... [See More]
- Applications: General; Avionics; Communications; EMI Filtering; Industrial; Portable Devices
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 18 to 40
from Picor Corporation
Description. The QPO-1 output ripple attenuator SiP uses active filtering to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 KHz. The QPO-1 operates over a voltage range from 3 to 30 Vdc and supports load currents as high as 10 A. Output regulation is maintained using... [See More]
- Applications: General; Avionics; Communications; Industrial; Portable Devices; Ripple Attenuator
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 3 to 30
from Picor Corporation
Description. The QPO-1 output ripple attenuator SiP uses active filtering to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 kHz. The QPO-1 operates over a voltage range from 3 to 30 Vdc and supports load currents as high as 10 A. Output regulation is maintained using... [See More]
- Applications: General; Avionics; Communications; Industrial; Portable Devices; Ripple Attenuator
- Filter Class: Continuous
- Filter Category: Active Filter
- Supply Voltage (VS): 0.3000 to 5.5