Continuous IC Electronic Filters
from DigiKey
Universal, Continuous-Time Filter IC Universal, Continuous-Time 8th Order 150kHz 20-SSOP [See More]
- Filter Class: Continuous
- Filter Type: Universal
- Filter Category: Active Filter
- Supply Voltage (VS): 4.75 to 10.5
from DigiKey
Universal, Continuous-Time Filter IC Universal, Continuous-Time 8th Order 150kHz 16-PDIP [See More]
- Filter Class: Continuous
- Filter Type: Universal
- Filter Category: Active Filter
- Supply Voltage (VS): 4.75 to 10.5
from DigiKey
IC FILTER LOWPASS PROG 24-DIP [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.37 to 16
from DigiKey
IC FILTER LOWPASS PROG 24-SOIC [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.37 to 12.6
from DigiKey
Continuous Low Pass Filter IC Continuous Low Pass 5th Order 1MHz 8-SO [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 4.5 to 5.5
from DigiKey
IC FILTER LP RC 4TH ORDER 16SSOP [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.7 to 11
from DigiKey
Continuous Low Pass Filter IC Continuous Low Pass 2nd Order 25kHz 20-PDIP [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.37 to 16
from DigiKey
Continuous Low Pass Filter IC Continuous Low Pass 2nd Order 25kHz 20-SOIC [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.37 to 16
from DigiKey
Continuous, Band Pass Low Pass Filter IC Continuous, Band Pass Low Pass 8th Order 150kHz 28-SOIC [See More]
- Filter Class: Continuous
- Filter Type: Low Pass; Band Pass
- Filter Category: Active Filter
- Supply Voltage (VS): 2.37 to 11
from DigiKey
Universal, Continuous-Time Filter IC Universal, Continuous-Time Order 100kHz 14-PDIP [See More]
- Filter Class: Continuous
- Filter Type: Universal
- Filter Category: Active Filter
- Supply Voltage (VS): 6 to 18
from DigiKey
Universal, Continuous-Time Filter IC Universal, Continuous-Time Order 100kHz 16-SOIC [See More]
- Filter Class: Continuous
- Filter Type: Universal
- Filter Category: Active Filter
- Supply Voltage (VS): 6 to 18
from Picor Corporation
Description. The QPI-10 includes the total Hot-Swap function with an EMI filter for V •I Chip applications. The product aligns with the AdvancedTCA ™ PICMG3.0 ® requirements for hot insertion and board level conducted noise limitations. The EMI filter provides conducted common-mode... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 36 to 76
- Filter Category: Active Filter
- Source Current (IS): 6000
from Universal Semiconductor, Inc.
Integrated thin film resistor capacitor diode network termination products are built on silicon substrates. USI's thin film resistors, capacitors and diodes are fabricated using proprietary, state-of-the-art thin film technology that offers high performance at very high frequencies in compact QSOP... [See More]
- Filter Class: Continuous
- Filter Type: Low Pass
- Filter Category: Passive Filter
- Package Type: SOIC (optional feature); SSOP (optional feature); TSSOP (optional feature)
from NDK
This is an integrated MCF with a built-in transformer which matchedterminating impedance with MCF impedance. This product can be manufactured according to your requestedterminating impedance. It can be designed and manufactured so that no adjustment is neededin the field. It has stable temperature... [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 10700
from Picor Corporation
Description. The QPI-11 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise of the Vicor V •I Chip products to comply with the CISPR22 standard requirements for conducted noise measurements. The filter is designed to operate up to 36 Vdc... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 5 to 50
- Filter Category: Active Filter
- Source Current (IS): 7000
from NDK
Differs from conventional crystal filters, this filter needs no transformer,resulting in a light and compact product, with excellent characteristicsyet still maintains the high Q of crystal. Compact and light. Stable temperature characteristics. Structure highly resistant to vibration and shock. [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 10.7 to 10700
from Picor Corporation
Description. The QPI-12 EMI filter is specifically designed to attenuate conducted common-mode (CM) and differential-mode (DM) noise comply with the CISPR22 standard requirements for conducted noise measurements. The filter is designed to operate up to 76 Vdc and supports 7A loads up to 60 °C... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 5 to 80
- Filter Category: Active Filter
- Source Current (IS): 7000
from NDK
Differs from conventional crystal filters, this filter needs no transformer,resulting in a light and compact product, with excellent characteristicsyet still maintains the high Q of crystal. Compact and light. Stable temperature characteristics. Structure highly resistant to vibration and shock. [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 10.7 to 10700
from Picor Corporation
Description. The QPI-3 active EMI filter attenuates conducted common-mode(CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 24 Vdc bus (10 – 40 Vdc). The QPI-3 ’s 7 A rating supports multiple DC-DC converter... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 10 to 40
- Filter Category: Active Filter
- Source Current (IS): 7000
from NDK
This is an integrated MCF with a built-in transformer which matchedterminating impedance with MCF impedance. This product can be manufactured according to your requestedterminating impedance. It can be designed and manufactured so that no adjustment is neededin the field. It has stable temperature... [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 21400
from Picor Corporation
Description. The QPI-4 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 48 Vdc bus (36 – 76 Vdc).The QPI-4's 7 A rating supports multiple DC-DC converter loads up... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 30 to 80
- Filter Category: Active Filter
- Source Current (IS): 7000
from NDK
This is a crystal filter that supports surface mounting. Adoption of a ceramic containerhas enabled the dimensions of the filter to be 7 Ã —5 Ã —1.35 mm. Supports a widefrequency range. Supports IR reflow and VSP.(Contact us for information on the temperature profile.). [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 21.4 to 21400
from Picor Corporation
Description. The QPI-5 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 24 Vdc bus (10 – 40 Vdc). The QPI-5 ’s 14 A rating supports multiple DC-DC converter... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 10 to 40
- Filter Category: Active Filter
- Source Current (IS): 14000
from NDK
Compact and light. Structure highly resistant to vibration and shock. [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 21400
from Picor Corporation
Description. The QPI-6 active EMI filter attenuates conducted common-mode (CM) and differential-mode (DM) noise over the CISPR22 frequency range of 150 kHz to 30 MHz. The product is designed for use on a 48 Vdc bus (36 – 76 Vdc). The QPI-6 ’s 14 A rating supports multiple DC-DC converter... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 30 to 80
- Filter Category: Active Filter
- Source Current (IS): 14000
from NDK
Because this MCF has a built-in transformer, it is possible to match an input/outputcircuit with various impedance values. Stable temperature characteristics. This product can be manufactured according to your requested terminatingimpedance value. Because it has already been completely adjusted, no... [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 45000
from Picor Corporation
Description. The QPI –7 is the low voltage version of the QPI-8 SiP product that includes the total Hot-Swap function withan EMI filter for DC-DC converter applications. The EMI filter provides active conducted common-mode (CM) and differential-mode (DM) noise attenuation over the CISPR22... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 18 to 36
- Filter Category: Active Filter
- Source Current (IS): 6000
from NDK
Compact and light. Structure highly resistant to vibration and shock. [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 45000
from Picor Corporation
Description. The QPI-8 is the industry ’s first System-in-Package (SiP) designed to integrate a total Hot-Swap function with an active EMI filter. The product aligns with the AdvancedTCA ™ PICMG ® 3.0 ‚ requirements for hot insertion and board level conducted noise limitations. [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 36 to 76
- Filter Category: Active Filter
- Source Current (IS): 6000
from NDK
This four-pole crystal filter with a built-in coupling capacitor also supports surfacemounting. Supports surface mounting. (Packed with embossed tape). Built-in coupling capacitor. Excellent shock-resistance. Frequency range Fundamental: 30 to 90 MHz [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 45 to 45000
from Picor Corporation
Description. The QPI-9 includes the total Hot-Swap function along with an EMI filter for V •I Chip applications. The EMI filter is designed to attenuate the conducted common-mode (CM) and differential-mode (DM) noise generated by the higher switching frequencies of the V •I Chips. The... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 18 to 40
- Filter Category: Active Filter
- Source Current (IS): 6000
from NDK
This compact crystal filter for small antennas has been developed to removeinterference caused by nonlinearity of a receiver and has low insertion loss across awide frequency range. It can be manufactured for a wide frequency range from 40 to 280 MHz. Compact and light. Low insertion loss. Excellent... [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 40000 to 170000
from Picor Corporation
Description. The QPO-1 output ripple attenuator SiP uses active filtering to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 KHz. The QPO-1 operates over a voltage range from 3 to 30 Vdc and supports load currents as high as 10 A. Output regulation is maintained using... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 3 to 30
- Filter Category: Active Filter
- Source Current (IS): 10000
from NDK
This filter has a wide range of applications from carrier equipment tomeasuring instruments that require particularly high stability and highreliability. Careful consideration to design, part selection, andmanufacturing, all ensure a highly stable and reliable filter.SSB (Single Side Band) filters... [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 10000
from Picor Corporation
Description. The QPO-1 output ripple attenuator SiP uses active filtering to reduce power supply output ripple and noise (PARD) over 30 dB from 1 kHz to 500 kHz. The QPO-1 operates over a voltage range from 3 to 30 Vdc and supports load currents as high as 10 A. Output regulation is maintained using... [See More]
- Filter Class: Continuous
- Supply Voltage (VS): 0.3000 to 5.5
- Filter Category: Active Filter
- Source Current (IS): 20000
from NDK
This filter has a wide range of applications from carrier equipment tomeasuring instruments that require particularly high stability and highreliability. Careful consideration to design, part selection, andmanufacturing, all ensure a highly stable and reliable filter.SSB (Single Side Band) filters... [See More]
- Filter Class: Continuous
- Filter Type: Band Pass
- Filter Category: Quartz / Crystal Filter
- Fc: 10700