Plastic Insulating Varnishes and Impregnating Resins
from ELANTAS North America LLC
Water-borne epoxy emulsion - dip-and-bake impregnating resin [See More]
- Substrate Compatibility: Metal; Paper or Paperboard; Plastic
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset
from Master Bond, Inc.
LED405FL3 is a flexible one component, LED curing adhesive system with excellent optical clarity and a refractive index of 1.51. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Cure / Technology: Cures by LED light
- Form / Shape: Liquid
- Industry: Aerospace; Automotive; Electronics; Electric Power; Marine; OEM or Industrial; Photonics; Semiconductors, IC's
from Master Bond, Inc.
Master Bond UV15 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured
from Master Bond, Inc.
Master Bond UV16 is a new one component, high strength, low viscosity, UV curable epoxy resin based polymer system for bonding, sealing, & coating with exceptionally high performance properties. It is a 100% reactive and does not contain any solvents or other volatiles. When exposed to a source... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured
from Master Bond, Inc.
Master Bond Polymer System 125 is a two component toughened epoxy resin for prolonged service above 500 °F with truly outstanding chemical resistance. High strength bonds serviceable up to 600 °F can be obtained with this exceptionally thermally stable and chemically resistant epoxy resin... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic
- Chemical System: Epoxy
- Form / Shape: Grease, Paste; Powder
- Cure / Technology: Thermoset
from Master Bond, Inc.
Master Bond Polymer System EP112 is a solventless, low viscosity two component cycloaliphatic epoxy resin system which is specifically designed for high performance outdoor and indoor electrical/electronicc/ structural applications. The two components are combined in a convenient noncritical mix... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset
from Master Bond, Inc.
EP112LS is optically clear, features reliable non-yellowing properties and has a refractive index of 1.55. This electrically insulative system is resistant to chemicals including water, oils, fuels, acids and bases. Featuring a mixed viscosity of 50-200 cps, EP112LS is serviceable over the... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset
from Master Bond, Inc.
Low viscosity MB250NT is a single component ethyl cyanoacrylate that cures exceptionally fast at room temperature. This high strength, non-toxic system meets ISO 10993-5 standard for cytotoxicity. It is often used in high speed production of disposable medical devices and also has first rate... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Cyanoacrylate
- Form / Shape: Liquid
- Cure / Technology: Reactive or Moisture Cured; Room Temperature Vulcanizing or Curing; Thermoset
from Master Bond, Inc.
EP21LVSP6 is a two component system that is also well suited for potting and encapsulation applications. It offers a very convenient one to one mix ratio, by weight or volume and is formulated to cure at room temperature. It has a desirable combination of a long open time of 3-5 hours, low mixed... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Room Temperature Vulcanizing or Curing; Thermoset
from Master Bond, Inc.
Master Bond Polymer System UV19 is a newly developed UV curable, low viscosity optically clear compound specifically designed for high performance laminating, sealing, bonding and coating. This remarkable acrylic based polymer composition can effectively replace conventional heat and/or solvent... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Elastomeric
- Form / Shape: Liquid
- Cure / Technology: Thermoset; UV or Radiation Cured
from Master Bond, Inc.
EP5G-80 is a one component, NASA low outgassing rated epoxy, with a moderate temperature cure requirement of 80°C for 4 hours. It is non-metallic system designed for heat sensitive electronic applications where high levels of conductivity are desired. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Grease, Paste
- Cure / Technology: Thermoset
from Master Bond, Inc.
Master Bond UV10 and UV10TK are one component UV curable modified epoxy compounds, ready for use as supplied, for high performance casting, coatings, sealing and bonding applications. UV10 is a low viscosity amber liquid at room temperature and UV10TK is a medium viscosity amber liquid at room... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Cure / Technology: Thermoset; UV or Radiation Cured
- Form / Shape: Liquid
- Industry: Aerospace; Automotive; Electronics; Electric Power; Laminaes; Marine; Military; OEM or Industrial; Photonics; Semiconductors, IC's; Tooling
from Master Bond, Inc.
EP41S-5 is chemically resistant and withstands acids, bases, alcohols, fuels and many solvents. This two part epoxy is widely used for bonding, sealing, coating, and encapsulating. It provides high physical strength properties and electrical insulation values. EP41S-5 offers convenient handling with... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Room Temperature Vulcanizing or Curing; Thermoset
from Master Bond, Inc.
Master Bond EP39MAOHT is a two component, thermally conductive, electrically insulative epoxy for bonding, sealing, coating, potting and encapsulation. Its low exotherm makes it well suited for large castings and potting applications. It withstands rigorous thermal cycling, vibration and shock. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Room Temperature Vulcanizing or Curing; Thermoset
from Master Bond, Inc.
Master Bond Supreme 112 is a two part epoxy for bonding, sealing, potting, and impregnation applications with a high glass transition temperature of 190-195°C and very low viscosity. [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces; Rubber or Elastomer
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset
from Master Bond, Inc.
Formulated for medical electronic applications, Master Bond EP62-1LPSPMed is a biocompatible two part epoxy that has a an ultra low viscosity. This makes it makes it ideal for use in underfill, impregnation and porosity sealing applications, while it also performs well in bonding, coating or... [See More]
- Substrate Compatibility: Ceramic, Glass; Composites; Metal; Plastic; Porous Surfaces
- Chemical System: Epoxy
- Form / Shape: Liquid
- Cure / Technology: Thermoset
from Epoxies Etc...
10-2000 is a one component, moisture curing polyurethane adhesive designed for bonding. and laminating. It may also be used to impregnate glass cloth and create a pipe repair. system. FEATURES: • Solvent Free. • No Mixing Required. • Resists Moisture, Solvents and Heat. • High... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Plastic; Wood
- Chemical System: Polyurethane
- Form / Shape: Grease, Paste
- Cure / Technology: Reactive or Moisture Cured
from Sauereisen, Inc.
Sauereisen Electric Resistor Cement No. 78 is an ideal electrical refractory cement for coating resistors, coils, electric heating elements, furnaces, and embedding resistance wire. It replaces. insulating varnish, enamel, mica, etc. The cement is also available in powder form known as Sauereisen... [See More]
- Substrate Compatibility: Ceramic, Glass; Metal; Paper or Paperboard; Plastic
- Chemical System: Ceramic
- Form / Shape: Liquid (optional feature); Powder (optional feature)
- Cure / Technology: Air Setting / Film Drying