Spring Steel Spring Washers
from Smalley
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces. Among the major advantages, this design eliminates the need to keep... [See More]
- Material: Spring Steel; StainlessSteel; Nickel Alloy (optional feature); Copper Alloy (optional feature)
- Inside Diameter: 0.250
- Washer Type: Wave
- Outside Diameter: 0.375
from SPIROL
Disc springs are conically-shaped, washer-type components designed to be axially loaded. What makes disc springs unique is that based on the standardized calculations of DIN EN 16984 (formerly DIN 2092), the deflection for a given load is predictable and the minimum life cycle can be determined. [See More]
- Material: Spring Steel
- Inside Diameter: 0.126 to 4.016
- Washer Type: Conical
- Outside Diameter: 0.315 to 7.874
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Spring Steel; C1095 Spring Steel
- Inside Diameter: 0.093
- Washer Type: Belleville
- Outside Diameter: 0.187
from Smalley
Crest-to-Crest Wave Springs are pre-stacked in series, decreasing the spring rate proportionally to the number of turns. Uses are typically applications requiring low-medium spring rates and large deflections with low-medium forces. Among the major advantages, this design eliminates the need to keep... [See More]
- Material: Spring Steel; StainlessSteel; Copper Alloy (optional feature)
- Inside Diameter: 0.450
- Washer Type: Wave
- Outside Diameter: 0.625
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Spring Steel; Spring Steel HRC 43-50
- Inside Diameter: 0.413
- Washer Type: Bowed or Curved
- Outside Diameter: 0.709
from Smalley
Wavo Springs are produced from round-section wire to provide higher loads while maintaining the accurate loading found in wave springs. As an alternative to Belleville Springs, the Wavo provides similar loads but with an accurate, predictable spring rate. Advantages. Accurate high force loading with... [See More]
- Material: Spring Steel; StainlessSteel
- Inside Diameter: 0.408
- Washer Type: Wave
- Outside Diameter: 0.500
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Spring Steel; Spring Steel
- Outside Diameter: 0.322
- Washer Type: Bowed or Curved
- Load: 1.5
from Smalley
Conventional Gap and Overlap Type Wave Springs are used in a wide variety of applications. For short deflections and low-medium forces, they function with precision and dependability. These two types of Smalley Wave Springs permit radial expansion or growth in diameter within a cavity, without the... [See More]
- Material: Spring Steel; StainlessSteel; Nickel Alloy (optional feature); Copper Alloy (optional feature)
- Inside Diameter: 0.444
- Washer Type: Wave
- Outside Diameter: 0.630
from Stock Drive Products & Sterling Instrument - SDP/SI
Industrial fasteners are hardware devices that join two or more items together, creating a semi-permanent or permanent connection. The fasteners most frequently used by machinery designers are screws, nuts, retaining rings, and various types of pins because of the basic role that they play in the... [See More]
- Material: Spring Steel; Spring Steel HRC 43-50
- Inside Diameter: 0.413
- Washer Type: Wave
- Outside Diameter: 0.827
from Smalley
Conventional Gap and Overlap Type Wave Springs are used in a wide variety of applications. For short deflections and low-medium forces, they function with precision and dependability. These two types of Smalley Wave Springs permit radial expansion or growth in diameter within a cavity, without the... [See More]
- Material: Spring Steel; StainlessSteel; Nickel Alloy (optional feature); Copper Alloy (optional feature)
- Inside Diameter: 3.401
- Washer Type: Wave
- Outside Diameter: 3.937
from ASRaymond
Stock sizes in high-carbon and stainless steels. Belleville spring washers are especially suited for high loads in small spaces. By combining them in varying sequence, each size gives numerous load-carrying possibilities. These washers have had all set removed during manufacture. Material. Spring... [See More]
- Material: Spring Steel
- Inside Diameter: 0.093
- Washer Type: Belleville
- Outside Diameter: 0.187
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Spring Steel; Spring Steel - SPR
- Washer Type: Bowed or Curved
from Maryland Precision Spring, an MW Industries Company
Our Maryland Precision Spring location has been a custom manufacturer of Belleville disc springs & stacks, constant & variable force springs, motor & power springs, retail PoP pushers, reel retrievers, light stampings, and electrical assemblies since 1972. A leading supplier in the Point of... [See More]
- Material: Spring Steel; Inconel, Silver; Copper Alloy
- Inside Diameter: 0.013 to 1.016
- Washer Type: Belleville; Conical
- Outside Diameter: 0.250 to 10.000
from Seastrom Manufacturing Co., Inc.
Dome Spring Washer. Dome spring washers are designed to have a very high load capacity with a very small deflection range. Use our Quick Search below to source beryllium copper dome spring washers and spring steel dome spring washers from our wide selection of options. Available Materials: Spring... [See More]
- Material: Spring Steel
- Outside Diameter: 0.218 to 0.874
- Inside Diameter: 0.127 to 0.514
- Thickness: 0.010 to 0.020
from Rolex Spring, A Division of MW Industries
AM Series are precision springs geared to the metric community and manufactured utilizing DIN 2092 and DIN 2093 as guidelines. AM Series springs are designed to meet high performance requirements of dynamic spring applications. They are typically manufactured from High Carbon or Alloy steel; AISI... [See More]
- Material: Spring Steel
- Inside Diameter: 0.126 to 5.000
- Washer Type: Belleville
- Inside Tolerance: ID + 0.004, ID + 0.018
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Spring Steel; Carbon Spring Steel - CSS
- Inside Diameter: 0.122
- Washer Type: Belleville
- Outside Diameter: 0.224
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Spring Steel; Spring Steel - SPR
- Washer Type: Belleville
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Spring Steel; Spring Steel - SPR
- Outside Diameter: 0.394
- Inside Diameter: 0.118
- Thickness: 0.006
from Century Spring Corp.
A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage... [See More]
- Material: Spring Steel; Spring Steel - SPR
- Washer Type: Wave