Wire Leads Battery Holders
from DigiKey
Battery Holder (Open) AAA 1 Cell Wire Leads [See More]
- Mounting: Wire Leads
- Cell Capacity: Single Cell
- Type: Holder (Open)
- Number of Cells: 1
from Keystone Electronics Corp.
Part Number: 2461. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA... [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Single Cell
from Takachi Electronics Enclosure Co., Ltd.
Battery snap terminal with lead wire for 9V (006P) battery. Possible to use with our SN-S battery holders. Lead wire length = 150mm. Available in 2 options : I type or T type, and in ABS plastic or PVC coverings. Sold in 10 or 100 pcs pack. [See More]
- Mounting: Snap Terminals; Wire Leads
- Material: PVC or ABS
- Type: Battery Snaps
- Cell Capacity: Single Cell
from DigiKey
Battery Holder (Covered) 9V 1 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Single Cell
- Type: Holder (Covered)
- Number of Cells: 1
from Keystone Electronics Corp.
Part Number: 2461CN. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, IEC LR6, 15, 15A, 15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606,ME90, E340E, E401E, EP401, EP401E,MP401H,R401, RP401, 810,910A, 910F, 910M, 1117M, 1118M, MN9100. Cell Size: AA. Material:... [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Single Cell
from Takachi Electronics Enclosure Co., Ltd.
Suitable to be installed into enclosures with material thickness of 1.0mm to 3.5mm. Cover can be opened/closed without any tool for easy battery replacement. [LINE-UP]. 5 different battery layouts : AA x 2, AA x 3, AA x 4, AAA x 2 and AAA x 4. 2 colors available : Black and Off-white. Each layout... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: Two to Four
from DigiKey
Battery Holder (Covered) AA 6 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 6
from Keystone Electronics Corp.
Part Number: 2471. # of Cells: 1. Battery Reference: IEC LR1,ANSI 910A, NEDA E90, E340E, E401E, EP401, EP401E,MP401H,R401, RP401, 810,, 910F, 910M, 1117M, 1118M, MN9100. Cell Size: N, 12 Volt. Material: Polypropylene. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires,... [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Single Cell
from DigiKey
Battery Holder (Covered) AAA 3 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 3
from Keystone Electronics Corp.
Part Number: 2490. # of Cells: 2. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Covered) AA 8 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 8
from Keystone Electronics Corp.
Part Number: 2490CN. # of Cells: 2. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA 1007. [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Covered) Coin, 20.0mm 2 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Coin Cell Holder; Holder (Covered)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 2463. # of Cells: 2. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
"Battery Holder (Covered) AA 3 Cell Wire Leads - 6"" (152.4mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 3
from Keystone Electronics Corp.
Part Number: 2463CN. # of Cells: 2. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA... [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Covered) AA 3 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 3
from Keystone Electronics Corp.
Part Number: 2487. # of Cells: 3. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA 1007 [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
"Battery Holder (Open) AA 5 Cell Wire Leads - 5"" (127.00mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 5
from Keystone Electronics Corp.
Part Number: 2487SW. # of Cells: 3. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Open) AA 3 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 3
from Keystone Electronics Corp.
Part Number: 2487CN. # of Cells: 3. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA 1007. [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
"Battery Holder (Open) AA 2 Cell Wire Leads - 6.5"" (165.1mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 2465. # of Cells: 3. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
"Battery Holder (Open) AA 4 Cell Wire Leads - 6.5"" (165.1mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 4
from Keystone Electronics Corp.
Part Number: 2465CN. # of Cells: 3. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA... [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
"Battery Holder (Open) AA 2 Cell Wire Leads - 6"" (152.4mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 2478. # of Cells: 4. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Open) AA 4 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 4
from Keystone Electronics Corp.
Part Number: 2478CN. # of Cells: 4. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: AA. Material: Polypropylene. Mounting: Wire Leads. Type: Holder. Wire Leads: 6.0" [150.0] long 26 AWG wires, UL/CSA... [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Covered) AAA 2 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 245. # of Cells: 1. Cell Size: 9 Volt. Material: ABS. Mounting: Wire Leads. Type: Holder [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Single Cell
from DigiKey
"Battery Holder (Open) AAA 2 Cell Wire Leads - 6"" (152.4mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 1086. # of Cells: 1. Battery Reference: 2032. Material: Polypropylene. Mounting: Wire Leads. Supplied with On / Off toggle switch. Polarized to protect circuitry against improper battery installation [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder; Coin Cell Holder
- Cell Capacity: Single Cell
from DigiKey
"Battery Holder (Open) AA 2 Cell Wire Leads - 6"" (152.4mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 1092. # of Cells: 2. Battery Reference: 2032. Material: Polypropylene. Mounting: Wire Leads. Supplied with On / Off toggle switch. Polarized to protect circuitry against improper battery installation [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder; Coin Cell Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Covered) AAA 3 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 3
from Keystone Electronics Corp.
Part Number: 2438. # of Cells: 2. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder. Water Resistant to IP65 standards. Supplied with sealed on / off switch [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Cell [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 8
from Keystone Electronics Corp.
Part Number: 2439. # of Cells: 3. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder. Water Resistant to IP65 standards. Supplied with sealed on / off switch [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
"Battery Holder (Covered) AA 2 Cell Wire Leads - 5.89"" (149.5mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 2440. # of Cells: 4. Cell Size: AA. Material: ABS. Mounting: Wire Leads. Type: Holder. Water Resistant to IP65 standards. Supplied with sealed on / off switch [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from DigiKey
Battery Holder (Covered) AA 4 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 4
from Keystone Electronics Corp.
Part Number: 232-M. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: 9 Volt. Material: ABS. Mounting: Wire Leads. Type: Strap [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Single Cell
from DigiKey
Battery Connector, Snap 9V 1 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Single Cell
- Type: Battery Snaps
- Number of Cells: 1
from Keystone Electronics Corp.
Part Number: 235-M. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: 9 Volt. Material: ABS. Mounting: Wire Leads. Type: Strap [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Single Cell
from DigiKey
Battery Holder (Covered) AA 2 Cell Wire Leads with Connector [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Covered)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 2238. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: 9 Volt. Material: Polyethylene. Mounting: Wire Leads. Type: Strap [See More]
- Mounting: Wire Leads
- Material: Polyethylene
- Type: Plastic Holder
- Cell Capacity: Single Cell
from DigiKey
"Battery Holder (Covered) Coin, 20.0mm 2 Cell Wire Leads - 6"" (152.4mm)" [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Coin Cell Holder; Holder (Covered)
- Number of Cells: 2
from Keystone Electronics Corp.
Part Number: 2241. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: 9 Volt. Material: Polyethylene. Mounting: Wire Leads. Type: Strap [See More]
- Mounting: Wire Leads
- Material: Polyethylene
- Type: Plastic Holder
- Cell Capacity: Single Cell
from DigiKey
BATTERY HOLDER AA 4 CELL LEADS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Holder (Open)
- Number of Cells: 4
from Keystone Electronics Corp.
Part Number: 84-4. # of Cells: 1. Battery Reference: ALL MANUFACTURERS, ANSI 15A,IEC LR6, NEDA 15,15C, 15D, 15F, 15M, 15NC, 221, 1101M, 1113M, 1306AP, 1306M, 1314M, 1606M. Cell Size: 9 Volt. Material: ABS. Mounting: Wire Leads. Type: Strap [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Single Cell
from Memory Protection Devices, Inc.
Model No. BH23AW. Description. 12 Volt Holder for "23A" Cell with 6" Wire Leads. Material. Polypropylene. Contact Material. Lugs: Steel, nickel plated overall. Color. Black. Accessories. Insulator no. BI-UM-3-4. Price, 100 pieces. $0.56. Price, 500 pieces. $0.48. Price, 1000 pieces. $0.44. Package... [See More]
- Mounting: Wire Leads
- Cell Capacity: Single Cell
- Type: Plastic Holder
- Number of Cells: 1
from Memory Protection Devices, Inc.
HOLDER 4 AA CELL W/SLIDING COVER [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 4
from Memory Protection Devices, Inc.
HOLDER 8AA CELL W/COVER & SWITCH [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 8
from Memory Protection Devices, Inc.
HOLDER BATTERY 9V WIRE LEADS [See More]
- Mounting: Wire Leads
- Material: ABS
- Type: Plastic Holder
- Cell Capacity: Single Cell
from Memory Protection Devices, Inc.
HOLDER BATTERY 2-AA CELLS 6"LDS [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from Memory Protection Devices, Inc.
HOLDER BATT 3-AA CELLS [See More]
- Mounting: Wire Leads
- Material: Polypropylene
- Type: Plastic Holder
- Cell Capacity: Multiple Cell
from Memory Protection Devices, Inc.
Part Number: BA4AAW. Details: 4 AA Battery Holder With 6" Wire Leads & Pressure Contacts, Springless. Holder Material: Polypropylene, flammability rated Ul94V-HB. Contact Material: Stainless steel, nickel plated overall. Color: Black. Accessories: BI-UM-3-4, Mylar Battery Insulator & ABG-43... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 4
from Memory Protection Devices, Inc.
Part Number: BC12AAW. Details: 2 AA Battery Holder With 6" Wire Leads. Holder Material: Polypropylene. Contact Material: Nickel plated overall. Color: Black. Accessories: BI-UM-3-4, Mylar Battery Insulator. Price (100 Pieces): 0.68. Price (500 Pieces): 0.59. Price (1000 Pieces): 0.56. Package Size:... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 2
from Memory Protection Devices, Inc.
HOLDER BATT 2-AA CELLS WIRE LDS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 2
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - polypropylene, PP-1040. Flammability rating-UL94 HB, UL file no. E216959. Temperature Range: -10 °C to +100 °C. Springs - nickel plated spring steel Wire - 152.4 mm Ref.Long 26 AWG, UL1007, CSA - TR-64, 300V, 80 ° C. Rivets - Brass, nickel plated. 9... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 2
from Memory Protection Devices, Inc.
HOLDER BATT 4-AA CELLS SLDR LUGS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 4
from Memory Protection Devices, Inc.
NOTES: Plastic material - Polypropylene, Black. Flammability Rating - UL94-HB, UL File NO. E216959. Temperature Rating: -10C to +100C. Springs - Nickel Plated Spring Steel. Rivets - Brass, Nickel Plated. Wires - 26 AWG, UL1007, CSA -TR-64, 300V, 80C. Contacts Resistance: Under 50mOhm for +/-... [See More]
- Mounting: Wire Leads
- Cell Capacity: Single Cell
- Type: Plastic Holder
- Number of Cells: 1
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - polypropylene. Flammability Rating-UL94 HB, UL File No. E216959. Temperature Range: -10 °C to +100 °C. Springs - nickel plated spring steel. Wire - 152.4 mm Long 26 AWG, UL1007, CSA - TR-64, 300V, 80 ° C. Rivets - Brass, nickel plated. 9 Volts Snaps -... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 10
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - polypropylene. Springs - nickel plated spring steel. Wire - 152.4 mm Ref.Long 26 AWG,. UL1007, CSA - TR-64, 300V, 80 C. Rivets - Brass, nickel plated. 9 Volts Snaps - Brass, nickel plated [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 6
from Memory Protection Devices, Inc.
HOLDER BATT 4-AA CELLS WIRE LDS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 4
from Memory Protection Devices, Inc.
HOLDER BATT 6-AA CELLS WIRE LDS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 6
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - polypropylene. Flammability Rating-UL94 HB, UL File No. E216959. Temperature Range: -10 °C to +100 °C. Springs - nickel plated spring steel. Wire - 152.4 mm Long 26 AWG, UL1007, CSA - TR-64, 300V, 80 ° C. Rivets - Brass, nickel plated. 9 Volts Snaps -... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 8
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - polypropylene. Springs - nickel plated spring steel. Wire - 152.4 mm Ref.Long 26 AWG,. UL1007, CSA - TR-64, 300V, 80 C. Rivets - Brass, nickel plated. 9 Volts Snaps - Brass, nickel plated [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 10
from Memory Protection Devices, Inc.
HOLDER BATT 4-AA 6" WIRE LEADS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 4
from Memory Protection Devices, Inc.
Model No. BH362A. Description. 6 AA Battery Holder With 150 mm Wires. Holder Material. Polypropylene. Contact Material. Nickel Plated Overall. Color. Black. Accessories. BI-UM-3-4, Mylar Battery Insulator. Price, 100 pieces. $1.02. Price, 500 pieces. $0.87. Price, 1000 pieces. $0.81. Package Size. [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 6
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - High impact ABS. Springs - nickel plated spring steel. Wire - 152.4 mm Ref.Long 26 AWG,. UL1007, CSA - TR-64, 300V, 80 C. Rivets - Brass, nickel plated. 9 Volts Snaps - Brass, nickel plated. ROHS COMPLIANT [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 6
from Memory Protection Devices, Inc.
HOLDER BATT 3-AA CELLS W/PC CONN [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 3
from Memory Protection Devices, Inc.
HOLDER BATT 3-AA CELLS WIRE LDS [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 3
from Memory Protection Devices, Inc.
SPECIFICATIONS : Plastic material - Polypropylene, Black. Flammability rating-UL94 HB, UL file no. E216959. Temperature Range: -10 °C to +100 °C. Springs - nickel plated spring steel. Rivets - Brass, nickel plated. 9 Volts Snaps - Brass, nickel plated. Contact resistance: Under 50mOhm for... [See More]
- Mounting: Wire Leads
- Cell Capacity: Multiple Cell
- Type: Plastic Holder
- Number of Cells: 4
from Memory Protection Devices, Inc.
Model No. BS2I-HD. Description. 2.5" Wire Length, 9 Volt Snaps, 4 Sided Female Heavy Duty Contact. Material. PVC Cover Over Fiberboard. Contact Material. Female: Phos-Bronze, Male: Brass. Nickel Plated Overall. Color. Black. Accessories. BS-COVER, Safety Cover. Price, 100 pieces. $0.29. Price, 500... [See More]
- Mounting: Wire Leads
- Cell Capacity: Single Cell
- Type: Battery Snaps
- Number of Cells: 1