-
Supplier: Newark, An Avnet Company
Description: SPST 12 Volt Relay; Contact Configuration:SPST; Coil Voltage:12V; Contact Current:15A; Product Range:Relay; Relay Mounting:PCB; Coil Type:DC; Contact Voltage VAC:-; Relay Terminals:Through Hole; Contact Voltage VDC:16V
-
Supplier: Heilind Electronics, Inc.
Description: HIGH VOLT REED RELAY FORM REED RELAY
-
Supplier: Newark, An Avnet Company
Description: PCB, Solid State Relay, Control Voltage AC Max. 12 Volt, Control Voltage DC Max. 12 Volt.
-
-
Supplier: Newark, An Avnet Company
Description: G2R RELAY 12 VOLT DC
-
Supplier: Newark, An Avnet Company
Description: REED RELAY, MINIATURE MOLDED SIP RELAY, 10W 4-PIN SIP, 12 VDC COIL VOLT ROHS COMPLIANT: YES
-
Supplier: Quarktwin Technology Ltd.
Description: 1 VOLT RELAY ADJ 11-15VAC -13P 8
- Operating Temperature: 32 to 104 F
-
Supplier: Waytek, Inc.
Description: Song Chuan Micro Relay 871-1C-C-12VDC Category: Mechanical Relays & Connectors Manufacturer: Song Chuan Volt Rating: 12VDC Space-saving relay with high current capacity
- DC Coil Voltage: 12 volts
- Operating Temperature: -40 to 257 F
- Throw: Double Throw
- Features: Other
-
Supplier: Powell Electronics, Inc.
Description: LAMINATED 120-volt AC
-
Supplier: Waytek, Inc.
Description: Song Chuan Micro Relay, 871-1A-S-12VDC Category: Mechanical Relays & Connectors Manufacturer: Song Chuan Volt Rating: 12VDC Sealed enclosure Space-saving relay with high current capacity
- DC Coil Voltage: 12 volts
- Operating Temperature: -40 to 257 F
- Features: Other
- Mounting: Panel
-
Supplier: Air Compressors Direct
Description: Pre-Packaged Compressed Air Solution •A complete pneumatic system w/ all components needed to install Includes: •325C VIAIR Compressor •2.5 Gallon VIAIR Air Tank •1/4” NPT Quick Connect Coupler (M) •Dash Panel Gauge with ON/OFF Switch •Pressure Switch with Relay (110 PSI on, 150 PSI off)
- Discharge / Operating Pressure: 150 psi
- Flow Capacity: 1.17 to 0.88 SCFM
- Power Source: DC
-
Supplier: Air Compressors Direct
Description: Tank Size Gallons Power .97 CFM @ 90 PSI Designed To Fill Air Tanks, For Tanks 5-Gallon & Smaller •Not equipped w/ ON/OFF switch or pressure sensitive shutoff •Use of a pressure switch & relay recommended & required Built For Years Of Reliable Service •Gearless, direct-drive 12V electric
- Discharge / Operating Pressure: 150 psi
- Flow Capacity: 1.31 to 0.97 SCFM
- Power Source: DC
-
Supplier: Air Compressors Direct
Description: Quick Connect Stud (F) •1/4” NPT Quick Connect Coupler (M) •Dash Panel Gauge with ON/OFF Switch •Pressure Switch with Relay (110 PSI on, 150 PSI off) •Reducer (1/8” NPT F to 1/4” NPT M) •1/4” NPT 175 PSI Safety Valve •1/4” NPT Drain Cock •(3) 1/4” NPT Compression Fittings •4” Strip of
- Discharge / Operating Pressure: 150 psi
- Flow Capacity: 1.84 to 1.41 SCFM
- Power Source: DC
-
Supplier: Marsh Bellofram Group of Companies
Description: Features: Low Cost Rugged Design 10 Amp Output High Reliability 8 pin or 11 pin Track Mountable Plug-in base DPDT & 3PDT Arrangements 12, 24, 120, & 240 Volts Operation
- Maximum Current: 10 amps
- Maximum AC Switching Power: 2,300 VA
- Maximum DC Switching Power: 280 watts
- DC Coil Voltage: 12 volts
-
Supplier: Cole-Parmer
Description: Opto 22 offers a complete line of solid-state relays (SSRs), from the rugged 120/240-volt AC Series to the small-footprint MP Series, designed for mounting on printed circuit boards. All Opto 22 relays feature 4,000 volts optical isolation and are UL and CSA recognized.
- Output Voltage Type: DC
-
Supplier: VAST STOCK CO., LIMITED
Description: General Purpose Relays 12volts 1 Form A PLC Relay
- DC Coil Voltage: 12 volts
- Relay Type: General Application Relay
-
Supplier: Radwell International
Description: 1 HP AT 240 VOLT & 1/2 HP AT 120 VOLT, ELECTROMECHANICAL PLUG-IN GENERAL PURPOSE RELAY 12 AMP AT 240 VAC, SPDT, 24 VAC AT 50/60 HZ. FREE 2 YEAR RADWELL WARRANTY
- Relay Type: General Application Relay
-
Supplier: VAST STOCK CO., LIMITED
Description: Industrial Relays RELAY DC12 VOLT
- DC Coil Voltage: 12 volts
-
Supplier: Waytek, Inc.
Description: Song Chuan High Power Mini Relay 896H-1CH-S-12VDC Category: Mechanical Relays & Connectors Manufacturer: Song Chuan Volt Rating: 12VDC Terminals: (5) 1/4" nickel-plated terminals Sealed Flanged Cover Space-saving relay with high current capacity Ideal for use in a variety
- DC Coil Voltage: 12 volts
- Operating Temperature: -40 to 257 F
- Throw: Double Throw
- Features: Other, Sealed Relay
-
Supplier: Waytek, Inc.
Description: Song Chuan Micro Relay 871-1C-C-D1-12VDC Category: Mechanical Relays & Connectors Manufacturer: Song Chuan Volt Rating: 12VDC Diode Included Space-saving relay with high current capacity
- DC Coil Voltage: 12 volts
- Operating Temperature: -40 to 257 F
- Throw: Double Throw
- Features: Other
-
Supplier: Chief Enterprises LLC
Description: Relay Connector, Kit, 12 Volt 40 Amp
-
Supplier: Radwell International
Description: SAFETY CONTROL RELAY, 20 AMP, OPEN TYPE, DIN RAIL MOUNT, 12 POLE, 10 NORMALLY OPEN, 2 NORMALLY CLOSED, 24 VOLT DC. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: PUI - Projections Unlimited, Inc.
Description: AZ943 Series 12 Volts (V) Nominal Coil Direct Current (DC) Voltage 15 Ampere (A) Miniature Printed Circuit Board (PCB) Relay
-
Supplier: Perfect Switch, LLC
Description: Specifically designed for automotive, military, marine, aerospace, industrial, test fixtures, and various 12 and 24 volt OEM applications, POWER-GATE devices are engineered to handle shock and high-vibration environments . Our MOSFET-based relays are well suited for switching
- Input (Pick-up) Voltage Range: 12 to 24 volts
- Input Current Range: 25 to 150 amps
- Maximum Current: 150 amps
- Load Voltage: 12 to 24 volts
-
Supplier: Fairview Microwave Inc.
Description: Electromechanical relay transfer RF switch from Fairview Microwave has a control voltage of 12 Volts and a current of 540 mA. This coaxial electro-mechanical RF relay switch is rated for an insertion loss maximum of 0.6 dB and a minimum isolation of 60 dB. Features of
- Frequency Range: 0 to 12,400 MHz
- Insertion Loss: 0.6 dB
- Isolation (Port to Port): 60 dB
- VSWR: 1.7 :1
-
Supplier: Fairview Microwave Inc.
Description: Electromechanical relay transfer RF switch from Fairview Microwave has a control voltage of 12 Volts and a current of 540 mA. This coaxial electro-mechanical RF relay switch is rated for an insertion loss maximum of 0.4 dB and a minimum isolation of 60 dB. Features of
- Frequency Range: 0 to 12,400 MHz
- Insertion Loss: 0.4 dB
- Isolation (Port to Port): 60 dB
- VSWR: 1.45 :1
-
Supplier: Fairview Microwave Inc.
Description: Electromechanical relay transfer RF switch from Fairview Microwave has a control voltage of 12 Volts and a current of 540 mA. This coaxial electro-mechanical RF relay switch is rated for an insertion loss maximum of 0.4 dB and a minimum isolation of 60 dB. Features of
- Frequency Range: 0 to 12,400 MHz
- Insertion Loss: 0.4 dB
- Isolation (Port to Port): 60 dB
- VSWR: 1.45 :1
-
Supplier: Infineon Technologies AG
Description: 1 Form A Photovoltaic Relay in a 6-pin DIP Package 60 V, 1A AC/ 2A DC single-pole Photovoltaic Relay in a 6-pin DIP Package. This normally open solid-state relay can replace electromechanical relays in many applications. These units exceed the performance capabilities of
-
Supplier: Perfect Switch, LLC
Description: Specifically designed for automotive, military, marine, aerospace, industrial, test fixtures, and various 12 and 24 volt OEM applications, POWER-GATE devices are engineered to handle shock and high-vibration environments . Our MOSFET-based relays are well suited for switching
- Input (Pick-up) Voltage Range: 12 to 24 volts
- Input Current Range: 25 to 300 amps
- Maximum Current: 300 amps
- Load Voltage: 12 to 24 volts
-
Supplier: Radwell International
Description: SOLID-STATE PANEL MOUNT RELAY, 12-12.5VDC, 100A; CONTACT CONFIGURATION:-; LOAD CURRENT:100A; OPERATING VOLT MAX:75VDC; RELAY MOUNTING:PANEL; RELAY TERMINALS:SCREW; SWITCHING MODE:DC SWITCH; OPERATING VOLT MIN:3VDC ;ROHS COMPLIANT: YES. FREE 2 YEAR
- Features: DC Motor Starter
-
Supplier: Cole-Parmer
Description: Opto 22 offers a complete line of solid-state relays (SSRs), from the rugged 120/240-volt AC Series to the small-footprint MP Series, designed for mounting on printed circuit boards. All Opto 22 relays feature 4,000 volts optical isolation and are UL and CSA recognized.
- Output Voltage Type: DC
-
Supplier: Fairview Microwave Inc.
Description: (CW). Electromechanical relay single pole double throw RF switch from Fairview Microwave has a control voltage of 12 Volts and a current of 200 mA. This coaxial electro-mechanical RF relay switch is rated for an insertion loss maximum of 0.5 dB and a minimum isolation of
- Frequency Range: 0 to 12,000 MHz
- Insertion Loss: 0.5 dB
- Isolation (Port to Port): 70 dB
- VSWR: 1.4 :1
-
Supplier: Infineon Technologies AG
Description: 1 Form A Photovoltaic Relay in a 6-pin DIP Package 60 V, 2A AC/ 4A DC single-pole Photovoltaic Relay in a 6-pin DIP Package. This normally open solid-state relay can replace electromechanical relays in many applications. These units exceed the performance capabilities of
-
Supplier: Infineon Technologies AG
Description: 1 Form A Photovoltaic Relay in a 6-pin SMT Package 60 V, 2A AC/ 4A DC single-pole Photovoltaic Relay in a 6-pin SMT Package. This normally open solid-state relay can replace electromechanical relays in many applications. These units exceed the performance capabilities of
-
Supplier: Kussmaul Electronics Company, Inc.
Description: excessive current draw and motor burnout. Installation is simple, requiring only a connection to the vehicle's 12 volt system and the wiring of the Auto-Trol relay in series with the load.
- Voltage Sensing Range: 6 to 240 volts
-
Supplier: UL Standards & Engagement
Description: with their associated control devices including, but not limited to, voltage sensing relays, frequency sensing relays, and time delay relays. 1.4 An automatic transfer switch as covered by these requirements is a device that automatically transfers a common load from a normal
Find Suppliers by Category Top
Featured Products Top
-
White-Rodgers Emerson, and Egis Mobile Electric. Typically, these contactors are available in the 12- to 24-volt range and come in many varieties, sizes, and ratings depending on the application (read more)
Browse Electrical Contactors Datasheets for Waytek, Inc. -
the storage interval can be set from 1 second to 12 hours for the ultrasonic flow meter. A memory point of the ultrasonic flow meter contains all measured values once. The measured values are stored on the 32 GB built-in memory of the ultrasonic flow meter. 10 million measuring points can be stored (read more)
Browse Ultrasonic Flow Meters Datasheets for PCE Instruments / PCE Americas Inc.
More Information Top
Indicates content that may require registration and/or purchase.
-
CR4 - Thread: Resistor Value Calculation Needed
Put your bulb in front of an optocoupler, feed an NPN transistor with optocoupler and drive a 12volts relay with this transistor, do whatever you want to do with relay.
-
CR4 - Thread: 12 vdc Relay
Some have already answered your question and added other infos, but depending upon the characteristics of the 12 volt relay , it could pull in as low as 6 volts and not drop out till less than 3 volts.
-
CR4 - Thread: Installing a 12 Volt Unit Using 110 Volt Current
I have a 12 volt relay unit showing 5 pins, 85, 86 , 87, 87 and 30.
-
Well Performance Visualization and Analysis
The analog/digital electronics system contains outputs of a 12 volts relay driver and also normally open/closed contacts for external control of gas-gun valves, motors, variable speed drives, casing vent valves, etc.
-
CR4 - Thread: Design of a multi-variable control software program
Serial (RS232) can handle at least 2 x 12volt relays .