-
Supplier: AVX Corporation
Description: ~ 85°C Core Material: Ferrite Typical Applications EMI supperssion USB LCD LVDS Mobile electronics The LCCM series of common mode chokes are suitable for common-mode noise filtering in commercial, industrial and consumer applications. Available sizes include
- Applications: Common-Mode Choke
- Core Material: Ferrite
- DCR: 67 to 2200 ohms
- Lead Type: No Leads (SMT)
-
Supplier: Coilcraft, Inc.
Description: Our 0603USB Series common mode chokes eliminate virtually all common mode noise in USB 3.1 Gen 1, HDMI, IEEE 1394 and LVDS applications and support data rates up to 4.8 Gbit/s. Eliminates virtually all common mode noise Optimized
- Applications: Common-Mode Choke, RF Inductor / Choke
- Core Material: Ferrite, Other
- Impedance Range: 180 ohms
- Operating Temperature: -40 to 85 C
-
Supplier: Coilcraft, Inc.
Description: Our 1206USB Series was designed for common mode noise suppression in high-speed differential signal lines (USB2.0, IEEE1394, and LVDS) for up to 2.7 GHz differential mode 3 dB cutoff frequency. It provides up to 2.24 kOhms common mode
- Applications: Common-Mode Choke, RF Inductor / Choke
- Core Material: Ferrite, Other
- Impedance Range: 760 ohms
- Operating Temperature: -40 to 85 C
-
-
Supplier: Coilcraft, Inc.
Description: Our 0805USB Series was designed for common mode noise suppression in high-speed differential signal lines (USB2.0, IEEE1394, and LVDS) and provide up to 3.4 GHz differential mode 3 dB cutoff frequency. They provide up to 2 kOhms common mode
- Applications: Common-Mode Choke, RF Inductor / Choke
- Core Material: Ferrite, Other
- Impedance Range: 1420 ohms
- Operating Temperature: -40 to 85 C
-
Supplier: Coilcraft CPS
Description: • Eliminates virtually all common mode noise in high-speed, differential mode signal transmission applications such as USB 2.0, IEEE1394, HDMI and LVDS. • Most provide >25 dB common mode attenuation and >100 ohms impedance.
- Applications: Common-Mode Choke
- Core Material: Ferrite
- DCR: 0.6500 ohms
- Impedance Range: 1715 ohms
-
Supplier: Coilcraft CPS
Description: • Designed for high-speed USB 3.0, HDMI, SATA, IEEE1394 and LVDS applications. • Supports data rates up to 4.8 Gbit/s. • Miniature EIA 0603 footprint; only 1.17 mm tall • Most values provide >15 dB common mode attenuation and >100 ohms impedance.
- Applications: Common-Mode Choke
- Core Material: Ferrite
- DCR: 0.1420 ohms
- Impedance Range: 234 ohms
-
Supplier: Coilcraft, Inc.
Description: Our 0805USBN Series low-profile common mode chokes are great for noise suppression in ultra-high-speed signal lines (USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.) and in high-speed differential signal lines (USB 2.0, IEEE1394, and LVDS). They are also
- Applications: Common-Mode Choke, RF Inductor / Choke
- Core Material: Ferrite, Other
- Impedance Range: 790 ohms
- Operating Temperature: -40 to 125 C
-
Supplier: Tripp Lite by Eaton
Description: ground (G)—the MT-6PLUS protects all three, covering two protection modes: full normal mode (H-N) and common mode (N-G/H-G). The MT-6PLUS’s unique protection system prevents disruptive line noise from causing A/V distortion, computer lock-ups, data errors and similar
- Clamping Voltage: 140 volts
- Maximum Surge Current: 132000 amps
- Standards: IEEE, Other
-
Supplier: Tripp Lite by Eaton
Description: components against even the strongest power surges and spikes. Because residential power outlets have three wires—hot line (H), neutral (N) and ground (G)—the IBAR4ULTRAUSBB protects all three, covering the two protection modes: full normal mode (H-N) and common mode
- Clamping Voltage: 140 volts
- Maximum Surge Current: 97000 amps
- Standards: IEEE
-
Supplier: Tripp Lite by Eaton
Description: components against even the strongest power surges and spikes. Because residential power outlets have three wires—hot line (H), neutral (N) and ground (G)—the IBAR6ULTRAUSBB protects all three, covering the two protection modes: full normal mode (H-N) and common mode
- Clamping Voltage: 140 volts
- Maximum Surge Current: 97000 amps
- Standards: IEEE
-
Supplier: RS Components, Ltd.
Description: Wurth WE-CNSW common mode filters offer high common mode suppression at high frequency and the winding symmetry provides small influence on high speed signals. Offered with a range of rated currents and impedance values, suitable applications for these
- Core Material: Ferrite
- DCR: 0.3000 ohms
- Inductance Tolerance: -25 to 25 (+/- %)
- Rated DC Current: 370 milliamps
-
Supplier: RS Components, Ltd.
Description: Wurth WE-CNSW common mode filters offer high common mode suppression at high frequency and the winding symmetry provides small influence on high speed signals. Offered with a range of rated currents and impedance values, suitable applications for these
- Core Material: Ferrite
- DCR: 0.3000 ohms
- Inductance Tolerance: -25 to 25 (+/- %)
- Rated DC Current: 370 milliamps
-
Supplier: RS Components, Ltd.
Description: Wurth WE-CNSW common mode filters offer high common mode suppression at high frequency and the winding symmetry provides small influence on high speed signals. Offered with a range of rated currents and impedance values, suitable applications for these
- Core Material: Ferrite
- DCR: 0.4500 ohms
- Inductance Tolerance: -25 to 25 (+/- %)
- Rated DC Current: 280 milliamps
-
Supplier: RS Components, Ltd.
Description: Wurth WE-CNSW common mode filters offer high common mode suppression at high frequency and the winding symmetry provides small influence on high speed signals. Offered with a range of rated currents and impedance values, suitable applications for these
- Core Material: Ferrite
- DCR: 0.4000 ohms
- Inductance Tolerance: -25 to 25 (+/- %)
- Rated DC Current: 300 milliamps
-
Supplier: Infineon Technologies AG
Description: 10W 5V Mini USB Adapter Reference Board This is a 10.5W 5.0V USB adapter reference design using Infineon Quasiresonant PWM IC ICE2QS03G and CoolMOS™ IPU60R950C6 (IPAK) in a small form factor with various mode of protections for a high reliable system. Summary of Features
- Category: Development Board
- Supported System: Other
Find Suppliers by Category Top
Featured Products Top
-
Sumida launches the WCNFC Series of wound chip structured DC common mode choke coils, featuring very low profile and compact SMD designs ranging from 1.4 x 1.2 x 0.9mm to 4.7 x 3.4 x 3.0mm. These choke coils deliver superior EMI suppression with minimal impact on high-speed differential data (read more)
Browse Inductors, Coils, and Chokes Datasheets for New Yorker Electronics Co., Inc. -
500Ω impedance at 100MHz attenuates common-mode noise in high-speed signal and power circuits. High Current Capability: Rated for continuous 4A current with low (read more)
Browse Inductors, Coils, and Chokes Datasheets for Win Source Electronics -
Enhanced Noise Suppression for Signal Integrity The DLP11SN900HL2L is a high-efficiency common mode choke (read more)
Browse Uncategorized Products Datasheets for Win Source Electronics -
electrical instrumentation, making it an essential component for power and signal line filtering. This common mode choke is ideal for engineers seeking solutions to reduce noise and improve signal integrity in compact electronic devices. Its low-profile design is well (read more)
Browse Inductors, Coils, and Chokes Datasheets for Win Source Electronics -
Coilcraft’s new 1812CAN series common mode chokes provide noise suppression on CAN (1 Mbps) or CAN FD (5 Mbps) data lines in automotive and industrial automation applications. CAN Common Mode Chokes are the most commonly used filter component to attenuate common mode noise at the CAN (read more)
Browse Inductors, Coils, and Chokes Datasheets for Coilcraft, Inc. -
Triad Magnetics For over 80 years, consumer, commercial and industrial electronic devices have relied on innovative magnetics technology from Triad Magnetics. We offer solutions for power conversion, filtering, isolation and more. Our products include transformers for audio, gate drive, power, medical/dental, wall-mount and plug-in applications; as well as inductors for current sense, common mode, toroidal, filtering and power applications. (read more)
Browse Inductors, Coils, and Chokes Datasheets for Triad Magnetics -
DC filter inductors DC swinging inductors Grounding inductors Common/differential mode inductors Materials for Custom Inductors and Chokes Triad Magnetics offers a wide variety of core material options (read more)
Browse Inductors, Coils, and Chokes Datasheets for Triad Magnetics -
SCHURTER expands its range of current-compensated chokes for printed circuit board mounting, to include a vertical design for 1-phase high current applications. The new DKIV-1 sports a compact design and smaller footprint due to its vertical orientation. The series is available with a ferrite or (read more)
Browse Inductors, Coils, and Chokes Datasheets for SCHURTER Inc -
Murata offers a variety of lead type EMI suppression filters including: inductor type operating from several MHz to several GHz capacitor type achieving a great noise suppression effect at frequencies between several MHz and several hundred MHz common mode choke (read more)
Browse EMI Filters and RFI Filters Datasheets for Murata Electronics -
cause damaging pitting, frosting, or fluting of bearings, all which lead to motor failure. microNexus eliminates the need for common mode chokes and inductive absorbers that only temporarily extend motor life. Additionally, there’s no need for shaft grounding rings which require ongoing maintenance and replacement. With our microNexus, you have a complete, compact electrical solution for big electrical problems. (read more)
Browse EMI Filters and RFI Filters Datasheets for MTE Corporation