-
Supplier: Thorlabs, Inc.
Description: %. Hot, cold, backside polished, ultrafast, D-shaped, elliptical, parabolic, concave, and laser line dielectric coated mirrors are available for more specialized applications.
- Diameter/Width: 25.4 mm
- Focal Length: 25 to 400 mm
- Mirror Coatings: Bare Aluminum, Enhanced Aluminum, Silver
- Mirror Materials: UV Grade Fused Silica
-
Supplier: Electro Optical Components, Inc.
Description: careful combination to give diffraction limited results. Several designs for focus systems based on spherical mirrors are available. Cylindrical mirrors are used for correcting astigmatic beams from slab discharge lasers and laser diodes. A range of cylindrical curvatures
- Mirror Types: Laser Mirror, Other
-
Supplier: Shanghai Optics
Description: cylindrical lenses in plano convex, plano concave, or aspheric shape. Special lenses available on request include bi-convex or double concave cylindrical lenses, parabolic mirrors, cylindrical ellipsoidal mirrors and double curved cylindrical lenses.
- Lens Application: Ultraviolet
-
-
Supplier: Locon Sensor Systems, Inc.
Description: parabolic mirrors (no lenses), which allows for full potting without degradation of the optical characteristics, thus providing the best long-term reliability in difficult environments. The electronic module uses chip-on-board technology on a ceramic-free substrate, and is therefore
- Body: Cylindrical
- DC Load: 3-Wire NPN, 3-Wire PNP
- Load: DC Load
- Operating Distance: 1.97 to 9.84 inch
Find Suppliers by Category Top
More Information Top
-
Stripe illuminator based on LED array and parabolic mirror for active triangulation sensors used on mobile robots
The long distance stripe-shaped collimation of the light radiated by a linear LED array is achieved by means of a cylindrical parabolic mirror with a focus line coinciding with the internal reflectors of the LEDs.
-
To the theory of the cylindrically-parabolic mirror
is emitted a Hertz Chen set in the focal line of a cylindrically parabolic mirror dipole.
-
Optical Designs Of Special Interest In The I-R
In the form shown, sug- gested elsewhere for use in a Bragg spectrometer, the required cylindrical parabolic mir- rors are ground and polished onto a solid block of a suitable optical material or prepared from sub -assemblies.
-
Design of a compact 3D laser scanner
… different scan schemes is made: a so called pre-objective scheme using an f-8 scan lens and a post- objective scheme using a so called banana field flattener, consisting of a convex, cylindrical hyperbolic mirror and a concave, cylindrical parabolic mirror .
-
On the 100th anniversary of the birth of Vsevolod Borisovich Veinberg
At the State Institute of Optics, Veinberg and Mein- gard developed in 1939 the design of a solar heater with parabolic cylindrical mirrors that are stationary throughout the day.
-
TENTH MARCEL GROSSMANN MEETING, THE: ON RECENT DEVELOPMENTS IN THEORETICAL & EXPERIMENTAL GENERAL RELATIVITY, GRAVITATION, & RELATIVISTIC FIELD THEORIES (IN 3 ...
(f) Ford and Svaiter have recently shown that vacuum fluctuations can be focused by a cylindrical parabolic mirror .
-
Technical History of the Beginnings of Radar
The Barkhausen-Kiirz oscillator was placed at the focus of a cylindrical parabolic mirror 4 ft wide and 1| ft deep and with this a sheet of metal 5 ft by 2 ft at a distance of about 100 yd was clearly …
-
Focusing Vacuum Fluctuations II
We calculate the mean squared scalar and electric fields near the focal line of a parabolic cylindrical mirror .
-
http://etd.auburn.edu/bitstream/handle/10415/159/Serkan_Mert_22.pdf?sequence=1
The second one uses two cylindrical parabolic mirrors for the same purpose.
-
Food inspection system using terahertz imaging
The proposed THz imaging system is composed of a gyrotron source, off-axis parabolic mirror (OAP), cylindrical parabolic mirror (CPM), flat reflector, normal parabolic mirror, and THz camera.
Indicates content that may require registration and/or purchase.