-
Description: gas pressure regulator manufacturer Actuator Pressure Setting Range: 0.4~0.5, 5~10, 9~14, 13~19, 18~24, 22~28, 27~33, 36~44, 42~51, 49~58, 56~66 Diaphragm Cover Material: Teflon coated A3, A4 steel sheet Diaphragm Material: NBR, EPR, fluorine rubber, oil-resistant rubber
- Media Description: Gas (general)
-
Description: TESCOM™ WegaMed 300 single stage preset cylinder pressure regulator according to DIN EN ISO 10524-1 for pressurized medical gases. CE-mark according to the Medical Device Directive 2007/47/EC. Inlet pressure of up to 4350 PSIG [300 bar]. This product
- Controlled Pressure Range: 0.0 to 73 psi
- Media Description: Gas (general), Other
- Regulator: Pressure Reducing Regulators, Other
-
Description: gases in laboratory applications and suitable for ECD (Electronic Capture Detector) applications. For very high work pressures up to 2175 psig / 150 bar Inlet section with purge valve, purging with process or inert gas Easy to use and safe operation (includes relief valve
- Media Description: Gas
- Pressure Rating: 2900 to 4350 psi
- Regulator Type: Pressure Reducing Regulators
-
-
Supplier: Equilibar, LLC.
Description: Precision Back Pressure Regulator For gas & mixed phase processes Rugged Bar Stock Design Available in ¼ inch through 1 inch sizes SS316 standard with Hastelloy C optional Diaphragms available in PTFE, Hastelloy, SS316, and polyimide
- Controlled Pressure Range: 0.0 to 2500 psi
- Media Description: Gas (general), High Purity Gas, LP - Gas, Natural Gas, Sour Gas, Specialty / Corrosive Gases, Other
- Regulator: Back Pressure Regulators
- Regulator Size: 0.1250 to 1 inch
-
Description: TESCOM™ 26-1700 Series regulator controls pressures up to 15000 PSIG [1034 bar] and is suitable for gas or liquid service.
- Controlled Pressure Range: 5 to 10000 psi
- Media Description: Gas (general)
- Regulator: Back Pressure Regulators
- Regulator Size: 0.1250 to 0.5000 inch
-
Supplier: Radwell International
Description: DISCONTINUED BY MANUFACTURER, REGULATOR, 44-3200 SERIES, SINGLE STAGE, GAS, MAXIMUM INLET PRESSURE 500, 3000 PSIG / 34.5, 207 BAR, BRASS, 316 STAINLESS STEEL,PORT SIZE & TYPE 3/8, 1/2IN NPTF 1/2, 1IN FLANGE. FREE 2 YEAR RADWELL WARRANTY
- Media Description: Gas (general)
-
Description: TESCOM™ BB-3 is a high pressure, low flow, miniature backpressure regulator. Six control pressure ranges are available up to 1200 PSIG [83 bar] outlet. This backpressure regulator can be used for hydraulic or pneumatic service and is small and compact, weighing
- Controlled Pressure Range: 0.0 to 1200 psi
- Media Description: Gas (general)
- Regulator: Back Pressure Regulators
- Regulator Size: 0.2500 inch
-
Supplier: Clippard
Description: • Provides a high level of precision and accuracy • Features non-rising internal adjustment • For applications where zero air consumption is required (non-bleed) Medium: Air, Water* or Oil* Input Pressure: 300 psig max. Ports: #10
- Media Description: Gas (general)
- Regulator: Pressure Reducing Regulators
-
Supplier: ControlAir LLC
Description: The Type 3500 provides a low cost, dependable regulator to reduce inlet pressures from as high as 6000 psig (413 BAR) down to working pressures ranging between 0 and 225 psig (15.5 BAR). This first cut regulator is available in three separate spring ranges.
- Controlled Pressure Range: 0.0 to 225 psi
- Media Description: Gas (general), Other
- Regulator: Pressure Reducing Regulators
- Regulator Size: 0.2500 inch
-
Supplier: Proportion-Air, Inc.
Description: Closed loop air pressure control valve. Pressure ranges from full vacuum up to 300 psig. Variety of analog and digital command signals. High accuracy of +/- 0.2% F.S. typical with +/-0.02% F.S. repeatability. Analog monitor output is standard, select 0-10Vdc or 4-20mA. Can be
- Controlled Pressure Range: 0.0 to 500 psi
- Media Description: Gas (general)
- Regulator: Vacuum / Absolute Pressure Regulators
- Regulator Size: 0.1250 inch
-
Supplier: Equilibar, LLC.
Description: Precision Back Pressure Regulator For liquid, gas & mixed phase processes SS316 Rugged Bar Stock Design Unique Chatter Suppression Feature in liquid only applications High Precision and sensitivity PTFE, stainless steel, and Hastelloy
- Controlled Pressure Range: 0.0 to 500 psi
- Media Description: Gas (general), High Purity Gas, LP - Gas, Natural Gas, Sour Gas, Specialty / Corrosive Gases, Other
- Regulator: Back Pressure Regulators
- Regulator Size: 1 to 4 inch
-
Supplier: Brooks Instrument
Description: The 8600 Series mechanical pressure regulators offer exceptional pressure output precision by virtue of their high-resolution control of the supply pressure. They are direct-acting, non-relieving units that provide bubble-tight shut-off on helium at 7 bar. Features
- Controlled Pressure Range: 0.0 to 200 psi
- Media Description: Gas (general)
- Regulator Size: 0.1250 inch
-
Supplier: Equilibar, LLC.
Description: The QB Series uses Proportion-Air’s patented technology for closed loop control. The QB Series valves can be built in either a single loop or double loop control scheme. The QBT Series is used to control pressure of inert gases from full vacuum up to 300 psig (21 bar).
- Controlled Pressure Range: 0.0 to 500 psi
- Media Description: Gas (general)
- Regulator: Vacuum / Absolute Pressure Regulators
- Regulator Size: 0.1250 inch
-
Supplier: Accuris
Description: GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR.
-
Supplier: Accuris
Description: Gas pressure regulators for inlet pressures up to 100 bar.
-
Supplier: Accuris
Description: Gas pressure regulators for inlet pressures up to 100 bar
-
Supplier: Accuris
Description: Gas Pressure Regulators for Inlet Pressures up to 100 Bar
-
Supplier: Radwell International
Description: DISCONTINUED BY MANUFACTURER, PRESSURE REGULATOR, HIGH CAPACITY, 1/4 INCH NPT, INLET 400 PSIG, 27.6 BAR, ALL METALLIC BODY, SPRING CHAMBERS, LIQUID /GAS. FREE 2 YEAR RADWELL WARRANTY
- Media Description: Gas (general)
-
Supplier: Equilibar, LLC.
Description: Precision Back Pressure Regulator for Hygienic Service For gas, liquid and mixed phase processes Wide Range of working Pressures and Flows Rugged 316 stainless steel Bar Stock Design with no Welded Fittings Hygienic: No Crevices, <32Ra Finish
- Controlled Pressure Range: 0.0 to 150 psi
- Media Description: Gas (general), High Purity Gas, LP - Gas, Natural Gas, Sour Gas, Specialty / Corrosive Gases, Other
- Regulator: Back Pressure Regulators
- Regulator Size: 0.5000 inch
-
Supplier: Radwell International
Description: REGULATOR, SINGLE STAGE, FIXED GAS FLOW, 0.3L/MIN, OUTLET 3/16INCH BARB/4.8MM, GAGUE 0-1000PSIG/70BAR, FOR USE WITH CALGAZ 34/58/105/AND 116 CYLINDERS. FREE 2 YEAR RADWELL WARRANTY
- Media Description: Gas (general)
-
Supplier: HydraCheck Inc.
Description: internal filter Ergonomic knob for improved grip 1/4” NPT outlet with stainless steel 1/4” tube fitting 2 1/2” dual scale gauges (psi/bar) Conforms to CGA E-4 standard for gas pressure regulators *Models with the following CGA inlet connections are self venting – 580, 677
- Controlled Pressure Range: 0.0 to 3000 psi
- Media Description: Gas (general)
-
Supplier: Proportion-Air, Inc.
Description: High pressure control up to 300 psig
- Controlled Pressure Range: 0.0 to 300 psi
- Media Description: Gas (general)
- Regulator: Back Pressure Regulators
- Regulator Size: 0.2500 to 1.25 inch
-
Description: ISO 2503:2009 specifies requirements for single or two-stage pressure regulators without flow-metering devices for connection to gas cylinders used for compressed gases up to 300 bar (30 MPa), dissolved acetylene, liquefied petroleum gases (LPG
-
Description: ISO 7291:2010 specifies requirements and test methods for pressure regulators in manifold systems used in welding, cutting, and allied processes for: a) compressed gases up to 30 MPa (300 bar); b) dissolved acetylene; c) liquefied petroleum gases (LPG); d)
-
Description: sealing, small pressure fluctuation, etc., and is widely used in the micro-pressure control of gases in various industrial equipment. Technical Parameters & Performances Trim Type Single-Seated( 2405S), Double-Seated( 2405D) Action Type Pressure
- Media Description: Gas (general)
-
Supplier: Automation24, Inc.
Description: ) is suitable for measuring gaseous media both corrosive and non-corrosive. The pressure gauge PLP300 can be used in many low pressure applications, such as vacuum pumps, air compressors, air filters, gas burners, vacuum ovens, suction regulators and respirators.
- Operating Temperature: -40 to 149 F
- Type: Other
-
Supplier: Proportion-Air, Inc.
Description: High pressure control up to 300 psig Piston Style Operation allows rapid response High relief flow Port size from 1/4 to 1-1/4 inch NPT
- Controlled Pressure Range: 0.0 to 250 psi
- Media Description: Gas (general)
- Regulator: Back Pressure Regulators
- Regulator Size: 0.2500 to 1.25 inch
-
Supplier: Linde North America, Inc.
Description: /closing, clearer and live visibility of cylinder contents Safety interlock to reduce risk of accidental opening Designed for safe craning/lifting Available for the full spectrum of industrial gases 300 bar working pressure Improved handling and lifting of the
- Connection: Threaded
- Material of Construction: Brass / Bronze
- Pressure Rating: 4351 psi
-
Supplier: Proportion-Air, Inc.
Description: Electro-pneumatic closed loop pressure control valve. Two loop design accepts a feedback signal from wide ranges of external sensors. Pressure ranges from full vacuum up to 300 psig. Variety of analog and digital command signals. High accuracy of +/- 0.2% F.S. typical with
- Controlled Pressure Range: 0.0 to 500 psi
- Media Description: Gas (general)
- Regulator: Vacuum / Absolute Pressure Regulators
- Regulator Size: 0.1250 inch
-
Supplier: Festo Corporation
Description: Grid dimension 90 mm Piloted or directly actuated compressed air filter diaphragm regulator Good regulation characteristics with minimal pressure hysteresis and primary pressure compensation Good particle and condensate separation With or without
- Controlled Pressure Range: 7.25 to 102 psi
- Media Description: Gas (general)
- Regulator Size: 0.3543 inch
-
Supplier: Restek
Description: for natural gas and refinery gas standards 0–300 psig inlet pressure range. 0–15 psig outlet pressure range. Supplied with 0–15 psig outlet pressure gauge, brass CGA 170 nut and nipple.
- Media Description: Gas (general)
-
Supplier: Radwell International
Description: PRESSURE REGULATOR, PNEUMATIC, SERIES NL4-RGS, DIAPHRAGM-TYPE REGULATOR, 0.5-16 BAR, G 1/2 PORT, 9500 L/MIN QN, MECHANICAL ACTIVATION, SINGLE PRESSURE SUPPLY, MEDIUM - NEUTRAL GASES/COMPRESSED AIR. FREE 2 YEAR RADWELL WARRANTY
- Media Description: Gas (general)
-
Supplier: EXAIR
Description: EXAIR's Pressure Regulators permit easy selection of an operating pressure that will allow the air product to work properly without using excessive amounts of compressed air. Reducing the air pressure from 100 PSIG to 80 PSIG reduces air consumption by almost 20% and
- Display: Analog
- Media: Gas
- Mount / Connection Location: Bottom
- Scale Units: psi, bar
-
Supplier: CSA Group
Description: ISO 7291:2010 specifies requirements and test methods for pressure regulators in manifold systems used in welding, cutting, and allied processes for: a) compressed gases up to 30 MPa (300 bar); b) dissolved acetylene; c) liquefied petroleum gases (LPG); d)
-
Supplier: CSA Group
Description: ISO 2503:2009 specifies requirements for single or two-stage pressure regulators without flow-metering devices for connection to gas cylinders used for compressed gases up to 300 bar (30 MPa), dissolved acetylene, liquefied petroleum gases (LPG
-
Supplier: Koike Aronson/Ransome, Inc.
Description: The Custom series regulators are designed to maintain pressure settings for cutting, welding and heating work.The bright red and green regulators allow the operator to quickly identify red for fuel and green for oxygen. It is recommended to use flashback arrestors such as the
Find Suppliers by Category Top
Featured Products Top
-
• Suitable for inlet pressure up to 300 bar • Easy installation into safety cabinet for gas cylinders • Tested for use with oxygen Typical Applications • Component Testing (read more)
Browse Gas Pressure Regulators Datasheets for Shenzhen Jewellok Technology Co., Ltd. -
0-1500, 2500, and 3000 PSIG delivery pressures available One piece encapsulated valve design with PCTFE seats and an internal filter Ergonomic knob for improved grip 1/4” NPT outlet with stainless steel 1/4” tube fitting 2 1/2” dual scale gauges (psi/bar) Conforms to CGA E-4 standard for gas pressure regulators (read more)
Browse Pressure Regulators Datasheets for HydraCheck Inc. -
seats and an internal filter Ergonomic knob for improved grip 1/4” NPT outlet with stainless steel 1/4” tube fitting 2 1/2” dual scale gauges (psi/bar) Conforms to CGA E-4 standard for gas pressure regulators Made in the USA *Models with the following CGA inlet connections are self-venting – 580, 677 (read more)
Browse Pressure Regulators Datasheets for HydraCheck Inc. -
consistent outlet pressure despite wide swings in the inlet (source) pressure or decaying inlet pressure. The PRD3 pressure regulator series is rated for inlet pressures up to 500 psi (34.5 bar) and can provide outlet pressures in the range of 0 to 30 psi (0 to 2.07 bar). The regulator can be ordered in brass, 303 SS, 316 SS or aluminum. (read more)
Browse Pressure Regulators Datasheets for Beswick Engineering Co., Inc. -
The PRD3 pressure regulator is an excellent choice for gas and pneumatic pressure regulation applications and is particularly useful when space and weight are critical. Ideal for fluctuating inlet pressures and controls outlet pressures as low as (0 to 30) psig (0 to 2.07) bar. Maintains a (read more)
Browse Pressure Regulators Datasheets for Beswick Engineering Co., Inc. -
The Beswick PRD4HP is the smallest and lightest three-stage pressure regulator in the world. It is ideal for accurately reducing high pressure, up to 3,000 psi (206.8 bar), down to a much lower pressure in the 0 to 40 psi (0 to 2.76 bar) range. It is commonly used in (read more)
Browse Air Pressure Regulators Datasheets for Beswick Engineering Co., Inc. -
The Beswick PRDB-18MM is our smallest diaphragm regulator. It is specified when space is limited and weight needs to be kept to a minimum. Designed as a single stage regulator, the PRDB-18MM is ideal for applications with steady inlet pressures up to a maximum of 500 psig. (34.5 bar). The body is machined in brass with 303 and 316 stainless steel wetted components. The inlet and outlet ports are machined with M3x 0.5 internal threads. (read more)
Browse Pressure Regulators Datasheets for Beswick Engineering Co., Inc. -
Reliable, Self-Operated Regulation for Natural Gas Systems The NGP Series Natural Gas Pressure Regulator is designed for (read more)
Browse Pressure Regulators Datasheets for Shanghai Thinktank Process Management Co., Ltd -
or fuel cell electric power train) require a pressure regulator to reduce the stored gas (CNG or Hydrogen) pressure from 700, 500, 350 or 200 bar (or 70, 50, 35 and 20 MPa) to operating pressure. (read more)
Browse Pressure Regulators Datasheets for Shenzhen Jewellok Technology Co., Ltd. -
lifespan. The NGP Series Natural Gas Pressure Regulator is engineered to provide accurate regulation, structural durability, and operational reliability in demanding (read more)
Browse Pressure Relief Valves Datasheets for Shanghai Thinktank Process Management Co., Ltd