-
Supplier: Princess Auto Limited
Description: 10 ft Propane Hose
- Outside Diameter: 0.25 inch
-
Supplier: Princess Auto Limited
Description: 20 ft Propane Hose
- Outside Diameter: 0.25 inch
-
Supplier: Princess Auto Limited
Description: 5 ft Propane Hose Assembly
-
-
Supplier: Princess Auto Limited
Description: 12 ft Propane Hose Assembly
-
Supplier: Accuris
Description: Thermoplastic hose and hose couplings for conducting propane and natural gas
-
Supplier: Accuris
Description: Elastomeric composite hose and hose couplings for conducting propane and natural gas
-
Supplier: Accuris
Description: Thermoplastic Hose and Hose Couplings for Conducting Propane and Natural Gas
-
Supplier: CSA Group
Description: Preface This is the third edition of CSA 8.3, Thermoplastic hose and hose couplings for conducting propane and natural gas. It supersedes the previous editions published in 1975 and 1977. Scope 1.1 This Standard applies to newly produced thermoplastic hose, hose
-
Supplier: CSA Group
Description: for the transfer or conducting of propane and natural gas. 1.2 The hose and hose assemblies covered in this Standard are capable of operation at temperatures between -40°F (-40 °C) and 140°F (60 °C). 1.3 Type I hose refers to hose with a maximum operating pressure
-
Supplier: Mi-T-M Corporation
Description: Safety auto-extinguish tip over switch · Hose and regulator included · Piezo spark ignition · Requires 20 lb. LP tank, not included Fuel Tank Capacity 20 lb. Propane cylinder (not included) Fuel Consumption Low 65 hr./20 lbs. / High 24 hr./20 lb. Max. Operating Hours 24 hours/20 lb.
- Heating Capacity: 5.2758 kW
- Fuel / Energy Source: Natural Gas / Propane
- Features: Space Heater
-
Supplier: Mi-T-M Corporation
Description: Propane / Natural Gas Heater Outer Casing/Design: Rugged design · Durable powder coated outer casing and side lifting handles · Lifting handles for easy loading and unloading · The unit is naturally balance to lift easily with handles · Two 10-inch solid rubber tires for mobility and easy
- Maximum Air Flow: 750 to 2,450 SCFM
- Heating Capacity: 24.9135 to 93.792 kW
- Features: Forced Air Heater, Space Heater
- Fuel / Energy Source: Natural Gas / Propane
-
Supplier: Mi-T-M Corporation
Description: performance fan · Automatic shut-off if power is interrupted or flame is extinguished · Enclosed gas controls · Electronic ignition · Propane inlet connector - connects heater to propane tank via a supply hose Heat Output: Variable BTUs For use in workshops, garages,
- Maximum Air Flow: 300 to 1,500 SCFM
- Heating Capacity: 11.724 to 109.9125 kW
- Features: Forced Air Heater, Space Heater
- Fuel / Energy Source: Natural Gas / Propane
-
Supplier: Accuris
Description: Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
-
Supplier: CECOR
Description: with safety backup valve Overfill Prevention: Automatic overfill protection all discharge ports valved Engine: 20 HP Propane Engine Hoses: 2” I.D. x 16’ oil-resistant PVC suction hose including quick-disconnect coupler. Separate discharge hose of heavy-section clear
- Application / Industry: Heat Transfer Fluids
- Features: Other
- Equipment Type: Suction Clarifier
-
Supplier: CECOR
Description: valve Overfill Prevention: Automatic overfill protection all discharge ports valved Engine: 20 HP Propane Engine Hoses: 2” I.D. x 16’ oil-resistant PVC suction hose including quick-disconnect coupler. Separate discharge hose of heavy-section clear plastic 1-1/4” I.D. x
- Application / Industry: Heat Transfer Fluids
- Features: Other
- Equipment Type: Suction Clarifier
-
Supplier: CECOR
Description: Prevention: Automatic overfill protection all discharge ports valved Engine: 20 HP Propane Engine Hoses: 2” I.D. x 16’ oil-resistant PVC suction hose including quick-disconnect coupler. Separate discharge hose of heavy-section clear plastic 1-1/4” I.D. x 16’ with
- Application / Industry: Heat Transfer Fluids
- Features: Other
- Equipment Type: Suction Clarifier
-
Supplier: CECOR
Description: valve Overfill Prevention: Automatic overfill protection all discharge ports valved Engine: 20 HP Propane Engine Hoses: 2” I.D. x 16’ oil-resistant PVC suction hose including quick-disconnect coupler. Separate discharge hose of heavy-section clear plastic 1-1/4” I.D. x
- Application / Industry: Heat Transfer Fluids
- Features: Other
- Equipment Type: Suction Clarifier
-
Supplier: BUG-O Systems, Inc.
Description: Three Hose Torches: • Quick opening cutting oxygen valve for immediate full flow. • Separate preheat and cutting oxygen valves for high and low preheat control. • Cutting capacity to 15'' (381 mm). • Torches supplied with check valves on preheat oxygen and preheat fuel.
- Features: Other, Specialty / Other
-
Supplier: BUG-O Systems, Inc.
Description: Versatile 3-hose Machine Cutting Torches has a 15" cutting capacity.
- Accessory: Tube / Circumferential Welder
-
Supplier: UL Standards & Engagement
Description: which is covered by the Standard for Pigtails and Flexible Hose Connectors for LP-Gas, UL 569 and the Standard for LP-Gas Hose, UL 21 or the Standard for Elastomeric composite hose and hose couplings for conducting propane and natural gas, CSA 8.1, and the Standard
-
Supplier: Radwell International
Description: DISCONTINUED BY MANUFACTURER, 1/4" RV PROPANE SHUTOFF VALVE, QUICK CONNECT ADAPTOR FOR PROPANE HOSE, NATURAL GAS, 100% SOLID BRASS. FREE 2 YEAR RADWELL WARRANTY
- Features: Gas Fitting
- Fitting Type: Hose Fitting, Quick Coupler
-
Supplier: UL Standards & Engagement
Description: a hose swivel or swivel joint. The swivel connector will allow radial movement and is constructed for petroleum product, liquefied petroleum gas (LP-Gas) or anhydrous ammonia (NH3) service. NOTE: For the purposes of this standard the terms “LP-Gas” and “Propane” are interchangeable.
-
Supplier: RS Components, Ltd.
Description: Welding Hose propane 10m
-
Supplier: AENOR
Description: Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
-
Supplier: AENOR
Description: Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings
-
Supplier: AENOR
Description: Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
-
Supplier: AENOR
Description: Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixtures in the vapour phase - Part 1: Hoses and tubings
-
Supplier: CSA Group
Description: Preface This is the third edition of ANSI Z21.54/CSA 8.4, Gas hose connectors for portable outdoor gas-fired appliances. It supersedes the previous edition published in 1996 and 2002. Scope 1.1 This Standard applies to gas hose connectors (See Clause 3 Definitions), hereinafter
-
Supplier: Mi-T-M Corporation
Description: Matchless piezo spark ignitor for easy lighting · Operates on a standard 100 lb. propane cylinder · Automatic shut-off if flame is extinguished · 10-foot hose and regulator · Single handed controls for easy operation For use in workshops, construction sites, farms and loading docks
- Heating Capacity: 17.586 to 58.62 kW
- Features: Forced Air Heater, Space Heater
- Fuel / Energy Source: Natural Gas / Propane
-
Supplier: Hydrofarm, Inc.
Description: VCG-27 LP (propane) comes complete with (10) clean burning brass burners pre-installed that produce from 6 up to 27 cubic feet / hr of CO2. Two selector valves make setting the output easy. Electronic ignition standard, tip-over switch standard, dual redundant solenoids standard, peace of
-
Supplier: UL Standards & Engagement
Description: which is covered by the Standard for Pigtails and Flexible Hose Connectors for LP-Gas, UL 569 and the Standard for LP-Gas Hose, UL 21 or the Standard for Elastomeric composite hose and hose couplings for conducting propane and natural gas, CSA 8.1, and the Standard
-
Supplier: UL Standards & Engagement
Description: which is covered by the Standard for Pigtails and Flexible Hose Connectors for LP-Gas, UL 569 and the Standard for LP-Gas Hose, UL 21 or the Standard for Elastomeric composite hose and hose couplings for conducting propane and natural gas, CSA 8.1, and the Standard
-
Supplier: Aggreko
Description: is automatic Includes unique “Climate Control” system, which ensures efficient and reliable burner operation in all conditions. Compact and portable design for easy positioning on the work site. Heater accessories including gas line hose and regulators, glycol hose and manifolds, and
- Heating Capacity: 361.3923 kW
- AC Voltage Required: 115 to 230 volts
- Heater Type: Air Heater
- Features: Electric, Natural Gas / Propane, Other
-
Supplier: Hydrofarm, Inc.
Description: 1.5 cubic feet per hour of CO2 output. Anti-tip sensor. Electronic ignition. No pilot light. Chain hang or wall mount. Includes 12' propane hose and regulator.
Find Suppliers by Category Top
Conduct Research Top
-
Case Study - Marshall Gas Controls
Marshall Gas Controls in San Marcos, Texas, a division of the S.H. Leggitt Co., is a high-volume. manufacturer of high-pressure and adjustable liquid propane gas regulators, hose assemblies. and pigtails. For years, the company built its own leak testers. Although the testers performed well
More Information Top
-
Protocols
The propane hose (H) attached to the propane source used to fill the reservoir shows the copper fill tube attached.
-
States > Minnesota > State > Regulations > Agriculture‚ Department of > [MNR 1513] 1513 - Anhydrous Ammonia
Liquid propane hose .
-
Investigation into fatal fire at Carnauld Metalbox - issue 202
It is, however, understood that the oxygen and propane hoses were checked for leaks by the contractors and they found that all was in order.
Indicates content that may require registration and/or purchase.