-
Supplier: Taco Comfort Solutions
Description: Top quality Taco Liquid to Liquid Heat Exchangers are designed and constructed in accordance with ASME Section VIII and completely fabricated in-house. They feature U-tube construction and a wide variety of materials to meet the specific demands of your application. For example,
- ASME Certified: Yes
- Applications: HVAC
- Maximum Working Pressure: 400 psi
- Primary Exchanger Material: Brass, Steel, Stainless Steel, Other
-
Supplier: Taco Comfort Solutions
Description: Taco Steam to Liquid Heat Exchangers feature U-tube construction and are built in accordance with ASME Section VIII. A wide variety of materials allows you to choose the configuration that’s best for your particular application. For example, our standard shell material is steel,
- ASME Certified: Yes
- Applications: HVAC
- Maximum Working Pressure: 400 psi
- Primary Exchanger Material: Brass, Steel, Stainless Steel, Other
-
Supplier: Bell & Gossett, a xylem brand
Description: U-Tube Heat Exchangers for water to water or steam to water HVAC, plumbing or process applications. NPT or flanged heads, Diamondback double wall construction to prevent cross-contamination. SU, WU, DSU and DWU, TCW, TCS and TS tank heaters. The SU Heat Exchanger
- Applications: Chemical Processing, Domestic Water Use, Food and Beverage Processing, HVAC, Hydraulic, Oil Heating / Cooling, Power Generation, Steam
- Maximum Working Pressure: 0.0 to 300 psi
- Temperature Range: Up to 375 F
- Type: Shell and Tube
-
-
Supplier: Alfa Laval Inc.
Description: Aalborg MX is a compact shell and tube heat exchanger with U-tubes, ideal for heating of oil or water. The heat exchanger uses either steam or thermal oil as heating medium. Type Shell and tube heat exchanger with small diameter hairpin
- Applications: Oil Heating / Cooling, Marine / Shipboard
- Connection Type: Flange
- Maximum Working Pressure: 435 psi
- Primary Exchanger Material: Stainless Steel
-
Supplier: Alfa Laval Inc.
Description: . Pharma-line heat exchanger range Pharma-line is available in two product lines. Both lines consist of a standard range of U-tube designed Pharma-line. Pharma-line S Standardized serie with 21 standard models. Designed in accordance to pressure
- Applications: Food and Beverage Processing, Other
-
Supplier: Process Technology
Description: coil surface is active exchange area. SPECIFICATIONS 100 PSI working pressure (steam or water). 0.75 square foot to 2.5 square foot of exchange area standard. OPTIONS AVAILABLE (CONSULT FACTORY) Custom
- Applications: Chemical Processing, Electronics / Power Supply Cooling, Other
- Connection Type: Other
- Maximum Working Pressure: 100 psi
- Primary Exchanger Material: Steel, Stainless Steel, Titanium
-
Supplier: Alfa Laval Inc.
Description: Aalborg MP-C (formerly VESTA™ MP-C) is a compact shell and tube heat exchanger for either horizontal or vertical mounting. the Aalborg MP-C is the ideal choice when heating of oil, corrosive or edible cargo is required. The heat exchanger uses steam, thermal oil or
- Applications: Oil Heating / Cooling
- Connection Type: Flange
- Maximum Working Pressure: 232 psi
- Primary Exchanger Material: Stainless Steel
-
Supplier: Pentair Engineered Solutions
Description: Brazed Plate heat exchangers are ideal and offer a compact, high output capacity for Domestic HotWater heating applications. These heat exchangers offer substantial advantages over shell & tube,tank & coil, U-tube bundles and other older technologies when
- Applications: HVAC
- Maximum Working Pressure: Up to 450 psi
- Primary Exchanger Material: Stainless Steel
- Type: Plate
-
Supplier: Dry Coolers, Inc.
Description: SAFETY System Does Not Require Water, Protecting Your Facility from Steam Explosions Caused by Leaking Heat Exchangers. SELF-CLEANING Scrubbing Action of the High Velocity Quenchant Effectively Eliminates Tube Fouling and Plugging. LONG SERVICE LIFE
-
Description: Recycle Time Reduced Fuel Use Reduced Emmissions Lower Operating Costs Increased Throughput Available for Straight, U, W and Tri-Tubes
- Applications: Other
- Primary Exchanger Material: Other
- Type: Other
-
Supplier: Accuris
Description: STEEL U-TUBES FOR TUBULAR HEAT EXCHANGERS TECHNICAL DELIVERY CONDITIONS
-
Supplier: ASME Standards and Certification
Description: The purpose of this document is to justify and provide technical criteria for the rules of Part Unfired Heat Exchanger (UHX) of ASME Section VIII Division 1, 2013 Edition, devoted to the design of U-tube, Fixed and Floating head Tubesheet Heat Exchangers. The
-
Supplier: ASME
Description: The purpose of this document is to justify and provide technical criteria for the rules of Part Unfired Heat Exchanger (UHX) of ASME Section VIII Division 1, 2013 Edition, devoted to the design of U-tube, Fixed and Floating head Tubesheet Heat Exchangers. The
-
Supplier: Accuris
Description: STANDARD SPECIFICATION FOR U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES
-
Supplier: Accuris
Description: STANDARD SPECIFICATION FOR U-BEND SEAMLESS COPPER AND COPPER ALLOY HEAT EXCHANGER AND CONDENSER TUBES - INCLUDES STANDARD + REDLINE (PDF)
-
Supplier: ASTM International
Description: 1.1 This specification covers U-bend seamless condenser, evaporator, and heat exchanger tubes of copper and copper alloys up to 2 in., inclusive, in diameter. Tubes for this application are normally made from the following copper or copper alloys: Copper or Copper
-
Supplier: Custom Thermoelectric
Description: All copper water block Liquid exchanger to rapidly remove heat from the hot side of peltier TECs or TEGs. Most efficient method of removing heat from a thermoelectric TEC or TEG. Nickel plated for protection against corrosion. TECs and TEGs can be mounted to both sides thereby
- Primary Exchanger Material: Copper
-
Supplier: Alfa Laval Inc.
Description: - FBLGA = special coil configuration - FBLGY = stainless steel tubing - FBLGM = ASME design (dedicated product leaflet available) Finned coil - Copper or stainless steel tubes (FBLGY) - Corrugated Al-fins 0.18 mm, no turbulators - Fin spacing 2.3 to 4 mm
- Applications: Power Generation
- Maximum Working Pressure: 87.02 psi
- Primary Exchanger Material: Copper, Stainless Steel
- Type: Air-Cooled, Shell and Tube
-
Supplier: ASTM International
Description: This specification establishes the requirements for condenser, evaporator, and heat exchanger U-bends that are manufactured from seamless copper and copper alloy tube. The material of manufacture shall be of such quality and purity that the finished product shall have the
-
Supplier: ASTM International
Description: 1.1 This specification covers U-bend seamless condenser, evaporator, and heat exchanger tubes of copper and copper alloys up to 50 mm, inclusive, in diameter. Tubes for this application are normally made from the following copper or copper alloys: Copper or Copper
-
Supplier: ASTM International
Description: 1.1 This specification establishes the requirements for condenser, evaporator, and heat exchanger U-bends that are manufactured from seamless copper and copper alloy tube. 1.2 UnitsThe values stated in either inch-pound units or SI units are to be regarded separately as
-
Supplier: Solaronics, Inc.
Description: Solaronics True Dual 2-Stage Heavy-Duty Gas-Fired Infrared Radiant Tube Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum energy efficiency. Save up to 75% in energy costs. 12-gauge black steel heat exchangers provide heat
- AC Voltage Required: 120 volts
- Applications: Drying
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Reflective Process Heater
-
Supplier: Solaronics, Inc.
Description: Solaronics Suntube IV Stainless Steel Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters for wet, humid and corrosive environments. Save up to 75% in energy costs. 304L stainless-steel combustion chamber and heat exchangers resist corrosion. Applications
- AC Voltage Required: 120 volts
- Applications: Drying
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Reflective Process Heater
-
Supplier: Solaronics, Inc.
Description: Solaronics Suntube IV GQ Standard-Duty Gas-Fired Infrared Radiant Tube Heaters are proven single-stage heaters in the Global Quality Series. Save up to 75% in energy costs. Aluminized steel heat exchangers resist corrosion. Models available with gas inputs from 40,000 to 200,000
- AC Voltage Required: 120 volts
- Applications: Drying
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Reflective Process Heater
-
Supplier: Solaronics, Inc.
Description: Solaronics True Dual Aluminized Two-Stage Gas-Fired Infrared Radiant Tube Heaters provide precise air to gas ratios at both the high- and low-heat stages for optimum efficiency. Save up to 75% in energy costs. Aluminized steel heat exchangers resist corrosion.
- AC Voltage Required: 120 volts
- Applications: Drying
- Fuel / Energy Source: Natural Gas / Propane
- Heater Type: Radiant Reflective Process Heater
-
Supplier: Thermax Inc. - MA
Description: Thermax TVN Direct Steam Vaporizers use condensing steam as a heat source on the shell side of a shell and U-tube heat exchanger. The cryogen is vaporized and superheated through the stainless steel tube bundle that is fit with proprietary vortex generators. The
-
Supplier: HUBER+SUHNER AG
Description: ), designation strip, Velcro straps and cable ties. Features Standard 19" 1U size Lightweight aluminium construction Telescopic drawer with tilt of 25° Up to 48 fibers per 1U Separate storage area for loose tubes and pigtails inside the
- Number of Ports: 48
-
Supplier: ASME Standards and Certification
Description: conjunction with strategies for successful design Evaluate examples of heat exchanger vibration, strumming of cables, and vibration and fatigue of pipes and panels Analyze the root cause of the Tacoma Narrows Bridge Collapse Determine how the flow-induced tube vibrations caused
- Modality: Internet / Online
- Type: Course
-
Supplier: ASME
Description: conjunction with strategies for successful design Evaluate examples of heat exchanger vibration, strumming of cables, and vibration and fatigue of pipes and panels Analyze the root cause of the Tacoma Narrows Bridge Collapse Determine how the flow-induced tube vibrations caused
- Modality: Internet / Online
- Type: Course
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: . Air-to-Air Aftercooler (ATAAC) System The ATAAC system provides a separate cooling for the intake manifold air. It routes hot, compressed air from the turbo and cools it with a single pass, air-to-air aluminum heat exchanger. The cooled, compressed air greatly reduces the emissions
- Horsepower: 401 HP
- Operating Weight: 63325 lbs
- Type: Wheel Dozer
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: performance. Air-to-Air Aftercooler (ATAAC) System The ATAAC system provides separate cooling for the intake manifold air. It routes hot, compressed air from the turbo and cools it with a single pass, air-to-air aluminum heat exchanger. The cooled, compressed air greatly reduces the
- Horsepower: 401 HP
- Operating Weight: 81498 lbs
- Type: Compactor / Roller
-
Supplier: H.O. Penn Machinery Company, Inc.
Description: . Air-to-Air Aftercooler (ATAAC) System The ATAAC system provides a separate cooling for the intake manifold air. It routes hot, compressed air from the turbo and cools it with a single pass, air-to-air aluminum heat exchanger. The cooled, compressed air greatly reduced the emissions
- Horsepower: 401 HP
- Operating Weight: 72164 lbs
- Type: Compactor / Roller
-
Supplier: ASME Learning & Development
Description: conjunction with strategies for successful design Evaluate examples of heat exchanger vibration, strumming of cables, and vibration and fatigue of pipes and panels Analyze the root cause of the Tacoma Narrows Bridge Collapse Determine how the flow-induced tube vibrations caused
- Modality: Internet / Online
- Type: Course
Find Suppliers by Category Top
Featured Products Top
-
-
efficiency and bolstering the amount of heat that the radiant tube is reradiating into the furnace chamber. Implementing these inserts can lead to energy savings of up to 15% and throughput improvements of up to 6%. SpyroCor® inserts are compatible with (read more)
Browse Heat Exchangers Datasheets for Saint-Gobain Performance Ceramics & Refractories -
approved for use by the following authorities: WRC, Water Byelaws Scheme (U.K.) DVGW, German Federal Health Office FDA, Non Food Additive Learn more about Hexoloy® SiC for heat exchanger tubes. (read more)
Browse Datasheets for Saint-Gobain Performance Ceramics & Refractories -
shell-and-tube heat exchangers are among the most common. We have answered four of these questions below (read more)
Browse Heat Exchangers Datasheets for Saint-Gobain Performance Ceramics & Refractories -
operate by taking the outlet hot gas and passing this through a heat exchanger with the cold inlet air on the other side of the tubes in the heat exchanger. The cold air is heated up by the outlet air. Economically, 50% thermal efficiency is considered as an Industry standard but the actual efficiency can (read more)
Browse Thermal Oxidizers and Catalytic Oxidizers Datasheets for Branch Environmental Corp. -
Qualtek heat shrinkable products include Polyolefin, Silicon, Teflon, Viton®, Kynar®, Halogen-Free, high temp, single wall, and adhesive lined tubing with varying shrink ratio, colors and sizes. Wire Harnesses & Splices Hose & Pipe Protection (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
. Customer service team led by senior technical engineers provides one-stop service, ensuring peace of mind. Versatile Applications: Suitable for various engineering projects such as air conditioning, refrigeration, heat exchange, etc (read more)
Browse Metal Tubes Datasheets for TONGYU Technology Co., Ltd. -
Heat Shrink Tubing Our complete line of Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high voltage insulation, molded parts and end caps, wide range of shrink (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
As part of our Wire Management, Cable Assemblies and Interconnect Division, Qualtek offers heat shrink products that can fit any customers wire and cable requirements. Our complete line of Heat shrinkable products include thin wall, medium and heavy wall, adhesive lined, medium and high (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
meters • Aerospace equipments • Engines • Nuclear instruments • Heat exchangers • Oil and Gas Industry • Mining (read more)
Browse Metal Ring Seals Datasheets for Sonkit (Shanghai) Industry Technology Co., Ltd.
More Information Top
-
Frontiers of Advanced Materials and Engineering Technology
In this project, the test well adopts the single- U tube heat exchanger .
-
The Numerical Simulation and Experiment Study on the Coupled Thermal Conduction and Groundwater Advection Heat Transfer Process under the Intermittent Operatio...
The key problem of the ground-coupled heat pump research concentrates on the coupling relationship between the U tube heat exchanger underground and the soil around and on the recovery of soil temperature.
-
Heat Exchanger - Heat Exchanger Manufacturers, Suppliers (Page 2)
SA192 U Tubes Heat Exchanger and Shell Tubes .
-
Sa179 - Sa179 Manufacturers, Suppliers
SA192 U Tubes Heat Exchanger and Shell Tubes .
-
http://www-pub.iaea.org/MTCD/publications/PDF/te_1624_web.pdf
IRIS implements a passive emergency heat removal system made of four independent subsystems, each of which has a horizontal, U tube heat exchanger connected to a separate SG feed/steam line.
-
CR4 - Thread: Removal of Tube Bundle from Utubes Heat Exchanger
We have to replace tube in U tubes heat exchanger ,the tube to tube sheet joint is strength welded.what is the easiest way to remove tube without affecting tube sheet,as we intend to reuse tube sheet,baffles and tie rod …
-
Domestic participation in a nuclear power project
Steam at 250°C and 40 bar is generated by the heavy water coolant in large U tube heat exchangers with an overall plant efficiency of 29%.
-
The Numerical Study on the Environmentally Sustainable System - Ground-Source Heat Pump System
The results show that the enhancing of soil thermal conductivity, inlet water temperature and inlet water flow rate leads to the increase of the heat exchange rate of U tube heat exchanger , and the influence on the double U tube is relativity …
-
Study of the comparative costs of five wet/dry cooling tower concepts
The polyethylene tube heat exchanger u n i t s are shown i n Figures 4-19 and 4-20.
-
ESDU 94042 - Selection and costing of heat exchangers. Shell-and-tube type.
TABLE 12.1 U AND C VALUES FOR SHELL-AND- TUBE HEAT EXCHANGERS U (W/m2K) C (£/(W/K)) U (W/m2K) C (£/(W/K)) U (W/m2K) C (£/(W/K)) U (W/m2K) C (£/(W/K)) U (W/m2K) C (£/(W/K)) U (W/m2K) C (£/ …