-
Supplier: Clark Solutions
Description: The flow meter and switch model DS02 works according to a modified variable area principle. The float is guided in a cylindrical measuring tube by means of a spring. The flowing medium moves the float in the flow direction. A Reed contact is mounted outside the
- Gas Volumetric Flow Rate: 0.0141 to 159 SCFM
- Liquid Volumetric Flow Rate: 1.32 to 39.6 GPM
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: Clark Solutions
Description: The flow meter and switch model DS03 works according to a modified variable area principle. The float is guided in a cylindrical measuring glass. The upper edge of the float shows the momentary flow via a burnt-in scale on the measuring glass. A Reed contact is
- Gas Volumetric Flow Rate: 0.0706 to 106 SCFM
- Liquid Volumetric Flow Rate: 0.0264 to 39.6 GPM
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: Clark Solutions
Description: The flow meter and switch model DS05 works according to a modified variable area principle. The float is guided in a cylindrical measuring glass by means of a spring. The flowing medium moves the float in the flow direction. The upper edge of the float shows the
- Liquid Volumetric Flow Rate: 0.0528 to 66 GPM
- Electrical Output: Switch
- End Fittings: Threaded
- Media Temperature Range: Up to 248 F
-
-
Supplier: Clark Solutions
Description: The flow meter DS10 operates according to the proven variable area principle. The flowing media moves a float upwards against gravity in a conical measuring tube.The height of the float indicates the flow rate and maybe read off a burnt-in scale on the measuring tube.
- Liquid Volumetric Flow Rate: 0.0011 to 0.7040 GPM
- End Fittings: Threaded
- Media Temperature Range: 212 F
- Operating Pressure: 0.0 to 145 psi
-
Supplier: Orange Research, Inc.
Description: . Flow Monitors Flow efficiency is always an issue. Our PVC variable-area meters relay slight changes in flow rate on a linear scale while withstanding the harshest environments. Unlike rotameters, they are easy to read even with dirty fluids and can be oriented
- Liquid Volumetric Flow Rate: 0.0 to 5 GPM
- Aggressive / Corrosive Process Media: Yes
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: KOBOLD Instruments, Inc.
Description: Low Head Loss Excellent Tolerance to Dirty Liquids and Suspended Solids Optional Setpoint Switches, 4-20 mA with HART® or Profibus-PA Superior Dampening System for Very Stable Flow Readings Calibrations for Viscosity and Density Available The TSK
- Liquid Volumetric Flow Rate: 2.2 to 6604 GPM
- Electrical Output: Analog Current, Switch
- End Fittings: Flanged
- Interface Options: Network / Fieldbus
-
Supplier: Orange Research, Inc.
Description: solid blocks of metal, they handle high-pressure applications of up to 5000 psi (vs 150 psi for rotameters). This makes them a natural for hydraulic and pneumatic systems. These variable-area models are designed for medium- to high-flow applications. The sensor, a movable Delrin cone,
- Liquid Volumetric Flow Rate: 0.0 to 4 GPM
- End Fittings: Threaded
- Media Temperature Range: 200 F
- Operating Pressure: 3000 psi
-
Supplier: Brooks Instrument
Description: Need reliable, durable flow measurement in high-pressure, high-temperature or hazardous process settings? The MT3750 metal tube variable area flow meter from Brooks Instrument is your hard-working answer. Constructed from high-strength steel, the MT3750 Series VA
- Gas Volumetric Flow Rate: 1.83 SCFM
- Liquid Volumetric Flow Rate: 26 GPM
- Electrical Output: Analog Current, Switch
- End Fittings: Compression, Threaded
-
Supplier: Brooks Instrument
Description: Reliable and affordable, MT3600 metal tube variable area flow meters satisfy the operational and reliability requirements for multiple industrial purge meter applications, such as metering coolants, pump seal fluids, lubricants under pressure and opaque fluids. Featuring high
- Gas Volumetric Flow Rate: 1660 SCFM
- Liquid Volumetric Flow Rate: 50 GPM
- Electrical Output: Switch
- End Fittings: Threaded, Other
-
Supplier: ABB Measurement & Analytics
Description: Purgemasters are ideal for applications such as the purging of control lines and instrument enclosures. Their use is easily extended into fluid sampling, liquid specific gravity, level measurement and similar services.
- Electrical Output: Switch
- End Fittings: Threaded
- Media Temperature: 250 F
- Operating Pressure: 261 psi
-
Supplier: Brooks Instrument
Description: Features Wide range of flow ratings Operating temperature range 33 to 125°F (1°C to 52°C) Pressure ratings up to 500 psig / 34 bar Two accuracy levels to choose from: 2% or 1% Full Scale Optional high and low-flow reed switch or
- Gas Volumetric Flow Rate: 170 SCFM
- Liquid Volumetric Flow Rate: 98 GPM
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: Brooks Instrument
Description: Engineered to work where you need it: Choose the MT3809 variable area (VA) flow meter (rotameter) for all the high-pressure, high-temperature VA flow measurement and control requirements on your next project. Proven to deliver reliable, repeatable gas and liquid
- Gas Volumetric Flow Rate: 750 SCFM
- Liquid Volumetric Flow Rate: 440 GPM
- Electrical Output: Analog Current, Switch
- End Fittings: Flanged, Threaded
-
Supplier: KOBOLD Instruments, Inc.
Description: Product Features Low Switch Point Low Pressure Drop at High Flows Brass or SS Construction Maximum Pressure - 5000 PSIG Maximum Temperature - 212°F N/O or SPDT Reed Switch KOBOLD SMN flow switches are used when
- Liquid Volumetric Flow Rate: 0.2500 to 13 GPM
- Electrical Output: Switch
- End Fittings: Threaded
- Media Temperature Range: 212 F
-
Supplier: KOBOLD Instruments, Inc.
Description: flowmeters/ flow switches operate on the basis of the well known variable area principle. The medium flows upward through a conically widening plastic measuring tube. The float is lifted by the flowing medium and indicates the instantaneous flow rate on the
- Electrical Output: Switch
- End Fittings: Threaded
- Media Temperature Range: 140 to 240 F
- Operating Pressure: 145 psi
-
Supplier: KROHNE Messtechnik
Description: The H250 M40 is the standard variable area (VA) flowmeter for the process and OEM industry. The VA meter combines mechanical flow measurement of liquids or gases with state-of-the-art communication capabilities. Additional electronic modules can be added or replaced at any time
- Gas Volumetric Flow Rate: 0.4167 to 1667 SCFM
- Liquid Volumetric Flow Rate: 0.0833 to 533 GPM
- Aggressive / Corrosive Process Media: Yes
- Electrical Output: Analog Current
-
Supplier: KOBOLD Instruments, Inc.
Description: Media Contacted Parts Available in Brass or Stainless Steel Construction KOBOLD S- flow switches work on the well known variable area principle but without the use of the open conical measuring tube. Instead, the instruments use a cylindrical control tube with a conical
- Gas Volumetric Flow Rate: 0.2000 to 70 SCFM
- Liquid Volumetric Flow Rate: 0.0750 to 14 GPM
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: OMEGA Engineering, Inc.
Description: FL-X Series variable-area flowrate indicators utilize fluid movement to actuate a swinging vane, which drives the scale pointer and triggers the signal switch. The corrosion-resistant construction includes no breakable tubes, and a display that is unaffected by the opacity of the
- Liquid Volumetric Flow Rate: 0.5000 to 7 GPM
- Aggressive / Corrosive Process Media: Yes
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: Gemu Valves
Description: Plastic flowmeter which operates according to the variable area principle with integral metering orifice, housing material: polysulfone. The float is made of PVC-U or PP which can also be fitted with a magnet for electrical detection of the flow rate. Dovetail sections moulded
- Liquid Volumetric Flow Rate: 13.21 to 220 GPM
- Aggressive / Corrosive Process Media: Yes
- End Fittings: Flanged, Socket Weld / Union
- Operating Pressure: 145 psi
-
Supplier: Gemu Valves
Description: The flowmeter operates according to the variable area principle. Metering tubes are available in Trogamid-T, suitable for inert media, and Polysulfone, suitable for corrosive media (PVC and PVDF tubes on request).Male threads moulded onto the ends of the metering tube allow for easy
- Liquid Volumetric Flow Rate: 1.10E-4 to 7.04 GPM
- Aggressive / Corrosive Process Media: Yes
- End Fittings: Socket Weld / Union
- Media Temperature Range: 32 to 212 F
-
Supplier: Gemu Valves
Description: The flowmeter operates according to the variable area principle. Metering tubes are available in Trogamid-T, suitable for inert media, and polysulfone, suitable for corrosive media (PVC and PVDF tubes on request). Male threads moulded onto the ends of the metering tube allow for easy
- Liquid Volumetric Flow Rate: 0.0022 to 88 GPM
- Aggressive / Corrosive Process Media: Yes
- End Fittings: Socket Weld / Union
- Media Temperature Range: 32 to 212 F
-
Supplier: Cole-Parmer
Description: Variable Area, Direct Reading Flowmeter
- End Fittings: Threaded
- Operating Pressure: 250 psi
- Operating Temperature: 230 F
- Type: Variable Area
-
Supplier: Cole-Parmer
Description: Variable Area, Direct Reading Flowmeter
- End Fittings: Threaded
- Operating Pressure: 250 psi
- Operating Temperature: 230 F
- Type: Variable Area
-
Supplier: Cole-Parmer
Description: Variable Area, Direct Reading Flowmeter
- End Fittings: Threaded
- Operating Pressure: 250 psi
- Operating Temperature: 230 F
- Type: Variable Area
-
Supplier: Cole-Parmer
Description: Variable Area, Direct Reading Flowmeter
- End Fittings: Threaded
- Operating Pressure: 250 psi
- Operating Temperature: 230 F
- Type: Variable Area
-
Supplier: ERDCO Engineering Corporation
Description: In addition to the performance benefits of the 3400 Series flow rate meter, the 3500 Series Armor-Flo? includes switching capabilities. Adjustable flow switches provide positive indication of flow/no flow conditions or may be positioned to establish process
- Gas Volumetric Flow Rate: 2 to 2000 SCFM
- Electrical Output: Switch
- Media Temperature: -10 to 400 F
- Mounting Type: Insertion Type
-
Supplier: ERDCO Engineering Corporation
Description: Measure liquid, gas or steam flow rates in horizontal or vertical pipelines. Armor-Flo? meters handle more aggressive fluids that cannot be measured with See-Flo® due to clarity, pressure or where process also requires limit switches or signal transmission.
- Gas Volumetric Flow Rate: 2 to 2000 SCFM
- Media Temperature: -10 to 400 F
- Mounting Type: Insertion Type
- Operating Pressure: 200 to 1000 psi
-
Supplier: ERDCO Engineering Corporation
Description: Transmit a signal or actuate limit switches in hazardous areas with the 3700 Series Armor-Flo? meter. The cover housing is listed by Underwriters Laboratories as an enclosure for metering equipment in hazardous areas. It contains an easy to read calibrated scale and the signal
- Gas Volumetric Flow Rate: 2 to 2000 SCFM
- Electrical Output: Analog Current, Switch
- Media Temperature: -10 to 400 F
- Mounting Type: Insertion Type
-
Supplier: OMEGA Engineering, Inc.
Description: The 150 mm High/Low Alarm Flow Meter with Optical Sensor Switch is a noninvasive means for detection of a HI or LOW flow. This sensor is ideal for signaling an alarm, cutoff valve, or other device when the float passes the detector (alarm, valve, etc. not included). The FLSW
- Gas Volumetric Flow Rate: 0.0017 to 2.47 SCFM
- Liquid Volumetric Flow Rate: 1.29E-4 to 0.5280 GPM
- Electrical Output: Switch
- End Fittings: Threaded
-
Supplier: Malema Sensors
Description: Malema's 2000 series variable area purge meters use a tapered borosilicate glass tube with a fine threaded regulating valve for precise flow adjustment. Various flow tube lengths such as 100 mm, 150 mm and 300 mm are available. It's compact construction with reduced
- Electrical Output: Switch
- End Fittings: Threaded
- Gas Volumetric Flow Rate Range: 0.5883 to 17.65 SCFM
- Liquid Volumetric Flow Rate Range: 4.40E-4 to 4.4 GPM
-
Supplier: Clean Air Products
Description: designed to offer the least envelope for each work area, thus minimizing weight and space. Easy, quick maintenance is accomplished through the use of a removable grill with front filter removal. The Series 201 Clean Bench cabinet configuration has been designed for "clean" edge air
- Air Cleanliness Class: Class 100 (ISO 5)
- HEPA Filter Efficiency: 99.99%, Other
- Hood Face Velocity: 70 to 110 SFPM
- Laminar Flow Direction: Horizontal
-
Supplier: RS Components, Ltd.
Description: L/min,â?¢ Accuracy ±5% FSD,â?¢ Repeatability ±1% FSD,â?¢ Switches - fully adjustable flow rate signalling,â?¢ Plant and equipment protection Media Monitored = Liquid Device Type = Variable Area Minimum Flow Rate
- Gas Volumetric Flow Rate: 0.1412 to 1.77 SCFM
- Operating Pressure: 145 psi
- Operating Temperature: 41 to 140 F
- Pipe Diameter: 1 inch
-
Supplier: RS Components, Ltd.
Description: L/min,â?¢ Accuracy ±5% FSD,â?¢ Repeatability ±1% FSD,â?¢ Switches - fully adjustable flow rate signalling,â?¢ Plant and equipment protection Media Monitored = Liquid Device Type = Variable Area Minimum Flow Rate
- Gas Volumetric Flow Rate: 0.0706 to 1.06 SCFM
- Operating Pressure: 145 psi
- Operating Temperature: 41 F
- Pipe Diameter: 1 inch
-
Supplier: RS Components, Ltd.
Description: L/min,â?¢ Accuracy ±5% FSD,â?¢ Repeatability ±1% FSD,â?¢ Switches - fully adjustable flow rate signalling,â?¢ Plant and equipment protection Media Monitored = Liquid Device Type = Variable Area Minimum Flow Rate
- Gas Volumetric Flow Rate: 0.3531 to 5.3 SCFM
- Operating Pressure: 145 psi
- Operating Temperature: 41 F
- Pipe Diameter: 1 inch
-
Supplier: RS Components, Ltd.
Description: L/min,â?¢ Accuracy ±5% FSD,â?¢ Repeatability ±1% FSD,â?¢ Switches - fully adjustable flow rate signalling,â?¢ Plant and equipment protection Media Monitored = Liquid Device Type = Variable Area Minimum Flow Rate
- Gas Volumetric Flow Rate: 0.3531 to 5.3 SCFM
- Operating Pressure: 145 psi
- Operating Temperature: 41 to 140 F
- Pipe Diameter: 1 inch
-
Supplier: Sentry Air Systems, Inc.
Description: : variable speed controller (115V only) and ON/OFF switch (220V) Optional: Magnehelic Gauge, hour counter, air volume downgrade (700 CFM), and 30? wide work area size Air Volume: up to 950 CFM (high), down to 50 CFM (low) 40? x 22? perforated work area
- Airflow: 700 SCFM
- Features: HEPA / ULPA Filters
- Minimum Particle Size Filtered: 0.3000 to 0.5000 µm
Find Suppliers by Category Top
Featured Products Top
-
FCI’s broad line of flow switches detect, monitor and alarm on flow of all liquids and gases. Our flow switches are designed for accurate, highly repeatable trip-point sensitivity in water, oils, chemicals as well as air and any gas in industrial plants and processes (read more)
Browse Flow Switches Datasheets for Fluid Components Intl. (FCI) -
The FLT93L inline type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the (read more)
Browse Flow Switches Datasheets for Fluid Components Intl. (FCI) -
Process control system designers and plant engineers in search of a compact flow switch/monitor that can be easily incorporated into gas and liquid process analyzer sampling systems will find that the (read more)
Browse Flow Switches Datasheets for Fluid Components Intl. (FCI) -
Performing Double-Duty in Air or Hazardous Gases The Dual Function FS10i Flow Switch/Monitor Cuts Plant Costs - Ideal for Wide Range of Gas Flow Applications Where Process Safety Is Important (read more)
Browse Flow Switches Datasheets for Fluid Components Intl. (FCI) -
highly reliable solution. Ideal for use in a wide range of nuclear power plant flow, level and temperature measurement applications, the FCI FLT93 FlexSwitch provides dependable critical equipment protection and plant integrity validation. Applications include: reactor core (read more)
Browse Flow Switches Datasheets for Fluid Components Intl. (FCI) -
costs significantly with the highly repeatable and dependable FS10i Flow Switch Monitor from Fluid (read more)
Browse Flow Switches Datasheets for Fluid Components Intl. (FCI) -
The Inline style thermal mass flow switch assembly includes the flow sensing element, temperature sensing element, bridge amplifier/signal output board, transmitter enclosure, and flow section. The flow section is typically specified to match the user's flow conduit and is plumbed directly (read more)
Browse Flow Meters Datasheets for Eldridge Products, Inc. -
EPI offers a complete line of thermal mass flow meters and flow switches for virtually any application. Our instruments are accurate, durable, reliable and, most important, can help you conserve energy costs. (read more)
Browse Flow Meters Datasheets for Eldridge Products, Inc. -
. See more information here! Fluid Components International (FCI) designs and manufactures thermal mass flow meters, flow switches and level switches for industrial process measurement applications utilizing patented thermal dispersion flow measurement technologies. (read more)
Browse Flow Meters Datasheets for Fluid Components Intl. (FCI) -
Suitable for water, oil and aggressive liquids, the robust steel sensor detects bubbles from approximately 1 mm diameter upwards. Based on continuous thermal principle, the switch is reliable, robust and easy to implement. Find out more about our OOL product range, from drip to bubble detection. (read more)
Browse Flow Meters Datasheets for Innovative Sensor Technology IST USA Division
More Information Top
-
ISA TR20.00.01 W/FORMS - Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations - Also Includes ISA 20.00.03-2007: ...
...20F2391 20F2411 20F2421 20F2431 20F2511 20F2521 20F2611 Turbine Flowmeter w/wo Totalizer Indicator Vortex or Swirl Flowmeter w/wo Totalizer Indicator Sonic Flowmeter Positive Displacement Flowmeter Direct-Reading Type Positive Displacement Flowmeter w/ Transmitter or Accessories Variable Area Flow Switch Mass Type Flowmeter Coriolis...
-
http://www.isa.org/Template.cfm?Section=Standards&template=Ecommerce/FileDisplay.cfm&ProductID=8801&file=TR_200001_Annex_A_reduced.pdf
Variable Area Flow Switch .
-
ISA TR20.00.01 - Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations; Updated with 27 new specification forms in...
...Thermal Mass Flowmeter w/wo Switches Thermal Mass Flow Switch Turbine Flowmeter w/wo Totalizer Indicator Vortex or Swirl Flowmeter w/wo Totalizer Indicator Positive Displacement Flowmeter Direct-Reading Type Positive Displacement Flowmeter w/ Transmitter or Accessories Variable Area Flow Switch Mass Type Flowmeter Coriolis...
-
ISA TR20.00.01 - Specification Forms for Process Measurement and Control Instruments Part 1: General Considerations; Updated with 20 new specification forms in...
I Variable Area Flow Switch .
-
HEDLAND Flowmeter, GPM/LPM 0.5 - 5.0 / 2-19 - Flowmeters - 4NNC9|H601A-005-F1 - Grainger Industrial Supply
Flow Switch , Variable Area , Max.