-
Supplier: RFMW
Description: On-Chip Crystal-Sustaining Circuit With Programmable Loading Capacitors Integrated LO Buffer and LO Divider High-Linearity RF Mixer Mixer Input IP3 +23dBm Typ. Mixer Bias Adjustable for Low Power Operation Mixer Frequency Range 30MHz to 2500MHz 2.7V to 3.6V Power Supply
-
Supplier: RFMW
Description: signal with a very fine frequency resolution. The LO output drives the built-in RF mixers which convert the signal into the required frequency band. The bias current can be programmed to optimize the supply current/performance trade-off. The LO generation blocks have been
-
Supplier: RFMW
Description: with a very fine frequency resolution. The LO output drives the built-in RF mixer which converts the signal into the required frequency band. The bias current can be programmed to optimize the supply current/performance trade-off. The LO generation blocks have been designed
-
-
Supplier: Fairview Microwave Inc.
Description: provide general amplification where noise is not crucial. Radio frequency amplifiers are generally used to convert lower power and low frequency radio signals into a larger frequency at a higher power. Coaxial amplifiers for RF are typically used in RF, microwave and
- Amplifier Type: Low Noise Amplifier
-
Supplier: RFMW
Description: -fine step sizes and low spurious products. The PLL/VCO engine combined with an external loop filter allows the user to generate local oscillator (LO) signals from 85 MHz to 4200 MHz. The LO signal is buffered and routed to the integrated RF mixers which are used
-
Supplier: Win Source Electronics
Description: Material: Brass Style: Straight Body Finish: Nickel Center Contact Material: Bronze Center Contact Plating: Gold Dielectric Material: Polytetrafluoroethyl ene (PTFE) Mating Cycles: 500 Convert From (Adapter End): NIM-CAMAC CD/N 549 Jack, Female Socket Convert To
-
Supplier: RS Components, Ltd.
Description: and features an electrodynamic energy generator, enabling the switch actuation to be converted in energy required to transmit the signal. IP67 rated,Low energy consumption,Fast link connection,sWave® wireless technology,Output signal can be individually configurated at
- Pole and Throw Specifications: Single Pole, Single Throw (SPST)
- Switch Base Material: Metal
- Wireless: Wireless
-
Supplier: OMEGA Engineering, Inc.
Description: wireless transmitter is mounted in a NEMA-4 (IP65) plastic enclosure. When activated the unit will transmit readings continuously at pre-set time interval that was programmed by the user during the initial setup. Each unit measures and transmits: IR sensor reading, ambient temperature,
- Accuracy: 2 ±% Full Scale
- Battery Powered: Yes
- Device Category: Sensor / Transducer
- Electrical Outputs: Current, Voltage
-
Supplier: ValueTronics International, Inc.
Description: selected QAM-RF output TS. The ASI Port can be configured to monitor any output TS. Back panel LEDs: Activity and alarm LED pair for each GbE port (12 LEDs in all) 10Base-T/100Base-T Ethernet ports: Two independent Ethernet ports, typically used for management (ETH1) and scrambling
Find Suppliers by Category Top
Featured Products Top
-
Providing Solutions To Complex Problems Boyd Corporation's fully integrated, in-house precision converting capabilities are available across multiple (read more)
Browse Converting Services Datasheets for Boyd -
RCN0118NB is a RF coaxial rotary joint, also named high frequency rotary joint, wave guide rotary joint. The channel coaxial rotary joint is conducive to reducing the size of the structure and processing, conducive to stable rotation. It meets the microwave transmission in a wide frequency band (read more)
Browse RF Rotary Joints Datasheets for CENO Electronics Technology Co., Ltd. -
the speed of 80rpm within the temperature from -20°C to +60°C. Most of the parameter is optional, for example the service life, torque, rotating speed, protection grade diameter, or materials. This radio frequency rotary joint is especially fit for the machinery witch transmit week (read more)
Browse RF Rotary Joints Datasheets for CENO Electronics Technology Co., Ltd. -
RF interconnect in situations where they are exposed to unfavorable conditions such as in marine environments. The level of salt spray resistance is measured in hours. All connectors and adapters are exposed to concentrated salt spray and tested for the corrosion of the base material for a full 720 (read more)
Browse RF Amplifiers Datasheets for DigiKey -
to Jitter Calculator Phase Noise Under Vibrations Calculator IP3 Intermodulation Calculator (read more)
Browse RF Filters and Microwave Filters Datasheets for Marki Microwave, Inc. -
ABSOPULSE Electronics PFC 319-D4 Series of IP66-rated AC-DC power supplies with active power factor correction (PFC) deliver up to 500W continuous output power. They use active power factor correction to convert a universal ac-input voltage (95V to 264Vac) to 12Vdc, 24Vdc, 48Vdc or 125Vdc (read more)
Browse Datasheets for ABSOPULSE Electronics Ltd. -
ABSOPULSE Electronics has released the PFC 65R-D3, a series of 300W IP66-rated railway quality power supplies with active PFC-input. The PFC 65R-D3 power supplies employ active power factor correction (PFC) to convert a universal ac-input voltage (95V to 264Vac) to 24Vdc, 48Vdc or 110 (read more)
Browse AC-DC Converters Datasheets for ABSOPULSE Electronics Ltd. -
inverter converts 24Vdc (21-230Vdc range) input to 230Vac continuous at 50Hz. Custom input/output values are readily available. Input and output are via sealed circular connectors, cable glands or custom connections. Key Specifications (read more)
Browse DC-AC Inverters Datasheets for ABSOPULSE Electronics Ltd. -
JFW Industries is pleased to present our 50T-566 7/16 M. This DC-3000 MHz, 50-Watt RF termination was specifically designed for outdoor 4G / LTE site applications. It (read more)
Browse RF Terminations Datasheets for JFW Industries, Inc. -
. 5)Measure the RF Voltage, Va, referenced to the receiving system. The units should be in decibels referenced to 1 micro-volt, dBmV. If the units are in absolute micro-volts (dependent on the receiving system used) they should be converted. The conversion factors are as follows, however, more (read more)
Browse Antennas Datasheets for A.H. Systems Inc.
More Information Top
-
Network-Based Information Systems
with two NSCard and 16 disk arrays, an EdgeQAM for converting IP packets to RF signals and client terminals, e.g. PC/PDA player as open source VideoLan Player, IPVOD/IPTV STB and CableSTB,respectively[10, 11, 12, 13].
-
An analysis of the technical and economic essentials for providing video over fiber‐to‐the‐premises networks
… need for only one type of network—the baseband data network—rather than a data network and a separate RF overlay net- work, albeit it at the cost of needing set-top boxes (STBs) to convert from IP to RF in the home for …
-
Microphotonics to nanophotonics: A quick scan
SAW is generated on the surface by an inter-digital transducer (IDT) which converts an RF electrical signal ip . to mechanical surface waves of the same frequency due to the piezoelectric property.
-
Design and analysis of a CMOS even harmonic mixer with current reuse circuits
The single-end conversion gain and IP ,& from RF to IF ports are measured by sweeping the LO power and v,, at the LO port as shown in Figure 3 (a) and (b), respectively, the tuning resistor Rmn,npis open load …
-
http://dspace.mit.edu/bitstream/handle/1721.1/8577/49236020-MIT.pdf?sequence=2
Of course, the gateway also works in the opposite direction by converting IJDP/ IP packets from the proxy to RF packets and transmits them to the device.
-
Machine learning identifies specific habitats associated with genetic connectivity in Hyla squirella
Measures of the importance of each predictor ( Ip ) are generated automatically in RF and were converted to model improvement ratios (MIRs) by dividing each Ip by the maximum Ip (MIR = Ip ⁄ Imax).
-
Cable modems: cable TV delivers the Internet
The cable modem physically termi- nates an RF coax drop cable; it converts the received broadcast channel to IP packets and passes them on to the desti- nation host PC.
-
Research on Mobile IP Routing of Space Network that Based on IP over CCSDS
… network, and the spacecraft’s payloads connect to its C&DH, the data needed will be routed by onboard router and transmitted to the ground gateway station via RF channels, in there, CCSDS … … will be unpacked and converted to IP packets so that they …
-
Evolution of optical access network technologies in radio systems
A re-modulation system of digital broadcast programs with a full end- to -end synchronous delivery mechanism based on IP multicast and IP- RF conversion has been demonstrated12 .
-
FTTP deployments in the United States and Japan-equipment choices and service provider imperatives
At the RF adaptor, upstream RF signals from legacy set-top boxes are converted into IP packets and routed to the INA via the data network.