Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Norton Abrasives
Description: Engineered to meet all OSHA and EPA safety requirements, these oil- and water-soluble diamond lapping compounds produce high finishes and tight final tolerances. Typical Applications Polishing for final dimensions of molds and dies Charging lapping plates and discs Tool polishing
- Abrasive Grain Type: Diamond
- Form: Liquid / Dispersion
- Grading / Grit System: Micron Graded
- Grit Size: 12 to 22
-
Supplier: Titan Tool Supply, Inc.
Description: Titan Tool Supply's diamond lapping compound is composed of uniformly shaped diamond grains of all virgin powder, completely free from contamination. Applications Polishing Our diamond lapping compound obtains the finest finish on steel, carbide and ceramics.
- Abrasive Grain Type: Diamond
- Form: Powder
- Type: Lapping
-
Supplier: Titan Tool Supply, Inc.
Description: Titan Tool Supply's diamond lapping compound is composed of uniformly shaped diamond grains of all virgin powder, completely free from contamination. Applications Polishing Our diamond lapping compound obtains the finest finish on steel, carbide and ceramics.
- Abrasive Grain Type: Diamond
- Form: Powder
- Type: Lapping
-
-
Supplier: Hyperion Materials & Technologies
Description: Water soluble compounds available in a variety of synthetic diamonds, natural diamond, and cubic boron nitride (CBN).
- Applications: Abrasive / Erosive Wear Protection
- Carbon and Graphite Material Type: Diamond / Diamond-Like
-
Supplier: Hyperion Materials & Technologies
Description: Oil soluble compounds available in a variety of synthetic diamonds, natural diamond, and cubic boron nitride (CBN).
- Applications: Abrasive / Erosive Wear Protection
- Carbon and Graphite Material Type: Diamond / Diamond-Like
-
Supplier: Precision Surfacing Solutions
Description: In today's technologically advanced world, there are a growing number of applications where conventional machining techniques just aren't accurate enough to meet precision surfacing requirements. Precision surfacing with abrasive media, a technology developed and refined by Lapmaster International
- Grading System (Grit / Shot): Micron Graded
- Grit Grade / Shot Size: 0.1000 to 45
- Material / Composition: Superabrasive - Diamond
- Natural Mineral: Yes
-
Supplier: Hyperion Materials & Technologies
Description: Water/Oil soluble compounds available in a variety of synthetic diamonds, natural diamond, and cubic boron nitride (CBN).
- Applications: Abrasive / Erosive Wear Protection
- Carbon and Graphite Material Type: Diamond / Diamond-Like
-
Supplier: Advanced Abrasives Corp.
Description: Compounds Advanced Abrasives diamond compounds are formulated using our tightly graded diamond powders and proprietary carriers for fast cutting action, excellent surface finish and easy cleanup. Available as natural diamond (NDP) or synthetic monocrystalline (MDP
- Abrasive Grain Type: Diamond
- Form: Paste / Cream, Other
- Grading / Grit System: Micron Graded
- Products / Materials Finished: Specialty / Other
-
Supplier: Advanced Abrasives Corp.
Description: Uni-Pol is our water miscible oil based diamond polishing compound available as monocrystalline or polycrystalline diamond in a range of abrasive particle sizes and container size formats (syringe or jar). The high quality finish associated with an oil based compound
- Abrasive Grain Type: Diamond
- Form: Other
- Grading / Grit System: Micron Graded
- Type: Polishing
-
Supplier: Precision Surfacing Solutions
Description: Lapmaster offers a wide range of diamond paste/compounds to process virtually any material used in today's manufacturing processes. All Lapmaster paste/compounds are specially formulated to withstand the most stringent of manufacturing processes. Fine diamond particles
- Grading System (Grit / Shot): Micron Graded
- Grit Grade / Shot Size: 0.1000 to 90
- Material / Composition: Superabrasive - Diamond
- Natural Mineral: Yes
-
Supplier: Precision Surfacing Solutions
Description: Lapmaster offers a wide range of diamond paste/compounds to process virtually any material used in today's manufacturing processes. All Lapmaster paste/compounds are specially formulated to withstand the most stringent of manufacturing processes. Fine diamond particles
- Grading System (Grit / Shot): Micron Graded
- Grit Grade / Shot Size: 0.1000 to 90
- Material / Composition: Superabrasive - Diamond
- Natural Mineral: Yes
-
Supplier: Advanced Abrasives Corp.
Description: Compounds Advanced Abrasives diamond compounds are formulated using our tightly graded diamond powders and proprietary carriers for fast cutting action, excellent surface finish and easy cleanup. Available as natural diamond (NDP) or synthetic monocrystalline (MDP
- Abrasive Grain Type: Diamond
- Form: Paste / Cream, Other
- Grading / Grit System: Micron Graded
- Products / Materials Finished: Specialty / Other
-
Supplier: DME Company
Description: Quality of mold or die ?nish is frequently an important factor in how a mold or die operates. D-M-E Diamond Compound is proven to produce the ?nest quality ?nish with considerable savings in time and labor. D-M-E Diamond Compound contains no adulterants, nor
- Abrasive Grain Type: Diamond
- Form: Liquid / Dispersion
- Grading / Grit System: Micron Graded
- Products / Materials Finished: Specialty / Other
-
Supplier: Hyperion Materials & Technologies
Description: Premium grade mesh synthetic diamonds with an enhanced crystal structure. These diamonds have controlled shapes and minimal inclusions and are the ideal solution where extremely robust performance is the key requirement.
- Abrasive Grain Type: Diamond
- Type: Specialty / Other
-
Supplier: Precision Surfacing Solutions
Description: Lubrication is necessary for a smooth running condition between the lap plate and conditioning rings and to help evenly disperse the diamond product on the lap plate. Lubricants used with any diamond compound or slurry should be compatible with the carrier in order to give the
- Abrasive Grain Type: Diamond
- Form: Liquid / Dispersion
- Grading / Grit System: Micron Graded
- Type: Lapping
-
Supplier: Advanced Abrasives Corp.
Description: Compounds Advanced Abrasives diamond compounds are formulated using our tightly graded diamond powders and proprietary carriers for fast cutting action, excellent surface finish and easy cleanup. Available as natural diamond (NDP) or synthetic monocrystalline (MDP
- Abrasive Grain Type: Diamond
- Form: Paste / Cream, Other
- Grading / Grit System: Micron Graded
- Products / Materials Finished: Specialty / Other
-
Supplier: SpeedFam Corporation
Description: Liquid Diamond contains a special dispersing agent. Its viscosity evenly distributes the diamond to enable high speed processing for a high level of smoothness on the polished surface. The anti-agglutinating reaction of the dispersing agents prevents diamond concentration and
-
Supplier: SpeedFam Corporation
Description: Diamond Paste consists of blocky diamond particles prepared in paste form to suit various applications. It exhibits uniform cutting properties producting precision reflective surfaces of high values. Applications: Ceramics, T.C., Mechanical Seals, Metallographic Samples, Carbide, Dies,
-
Supplier: Image Supply, Inc.
Description: This is a super fast, low swirl compound. It's the answer for high solids paint; cuts super fast with minimal swirls. Successfully tested in high solids production shops. Low-dusting, low splatter formula. Gal., 4/cs
-
Supplier: Accuris
Description: COMPOUND, DIAMOND ABRASIVE AND APPLICATOR GUN
-
Supplier: Gesswein Co., Inc.
Description: Used with Diamond Lapp Drills (see "Related Products" below) to drill holes in stones. The base in which the diamond is suspended is tacky enough to hold particles in place until they become embedded in the face of the lapp drill.
- Function / Application: Metal Cutting
- Industry & Features: Specialty
- Micro-dispersion: Yes
-
Supplier: Gesswein Co., Inc.
Description: Specifically designed for the mold & die industry, our Water Soluble compounds have the same diamond concentrations as our oil soluble type. Clean-up is fast and easy. Can be thinned using our water soluble lubricant (see "Related Products" below). Our Water Soluble Diamond
- Chemistry / Constituents: Water Soluble / Emulsion
- Function / Application: Metal Cutting
- Industry & Features: Specialty
- Micro-dispersion: Yes
-
Supplier: Gesswein Co., Inc.
Description: Specifically designed for the mold & die industry, our Water Soluble compounds have the same diamond concentrations as our oil soluble type. Clean-up is fast and easy. Can be thinned using our water soluble lubricant (see "Related Products" below). Our Water Soluble Diamond
- Chemistry / Constituents: Water Soluble / Emulsion
- Function / Application: Metal Cutting
- Industry & Features: Specialty
- Micro-dispersion: Yes
-
Supplier: Gesswein Co., Inc.
Description: Specifically designed for the mold & die industry, our Water Soluble compounds have the same diamond concentrations as our oil soluble type. Clean-up is fast and easy. Can be thinned using our water soluble lubricant (see "Related Products" below). Our Water Soluble Diamond
- Chemistry / Constituents: Water Soluble / Emulsion
- Function / Application: Metal Cutting
- Industry & Features: Specialty
- Micro-dispersion: Yes
-
Supplier: Xoxide
Description: zapping anything in your rig. IC Diamond 7 was the only compound able to pass accelerated reliability testing, due to it's high bulk loading and the fact that it is harder to pump or bake out a more solid paste as opposed to a lighter-loaded liquid-type paste. Cooling performance is
- Compound Type: Thermally Conductive
-
Supplier: Saint-Gobain Surface Conditioning Group
Description: Abrasive Slurries AmberCut™ CK series products are ready to use, waterless diamond lapping slurries. They are specifically formulated for the free abrasive bar lapping of computer disk read/write heads and the charging of lapping plates. The AmberCut CK series formula provides enhanced
- Abrasive Grain Type: Diamond
- Form: Slurry
- Grading / Grit System: Micron Graded
- Products / Materials Finished: Specialty / Other
-
Supplier: American Floor Mats
Description: Defined by its comfort and high-visibility borders, Primo Sponge Mats provide consistent and supportive comfort. Created in response to customer demand for a sponge product that meets basic performance requirements, Primo is a totally new sponge compound loaded with Nitrile and other
- Mat Type: Anti-Fatigue
-
Supplier: Durable Corporation
Description: ASTM D178 Switchboard Matting with diamond surface is the premier insulating matting to protect workers. Each roll is proof tested over the entire surface.Made of a specially compounded material. 1/4" thick. Black with yellow border available in 3' wide only.
- Length: 900 inch
- Warranty: 1 years
- Width: 24 inch
-
Supplier: Titan Tool Supply, Inc.
Description: 's ultra thin from .003" to .019" which makes it completely flexible, bendable and formable. The grains cannot escape as in Diamond Compound because they are held in a hard bond. This results in the most versatile cutting, lapping and polishing agent available to the Metal working and
- Abrasive Grain / Material Type: Diamond
- Applications: Finishing / Deburring (Fine Grits), Polishing / Lapping (Very Fine Grits), Toolroom / Sharpening
- Grit Size: 60 to 1100
- Type: Sheets / Rolls
-
Supplier: RS Components, Ltd.
Description: Supplied in 5g syringes. Compound and syringe label colour-coded for grade recognition Abrasive Type = Paste Colour = Red Grit Size = 8µm Bottle Size = 10ml
- Abrasive Grain Type: Diamond
- Form: Other
- Grit Size: 8
-
Supplier: Chemetall
Description: enable the R&D and production of engineered fluids. Some of the equipment includes: Diamond Dispersion/Sonicatio n Equipment - ultrasonic equipment for dispersion of sub-micron and nanometer sized diamond particles Flow Cells for Sonication - inline and continuous, large volume, batch
- Form: Slurry
- Type: Cleaning / Surface Preparation, CMP / Wafer Planarization, Grinding, Lapping, Polishing
-
Supplier: DME Company
Description: When polishing with Diamond Compound, stock removal may cause the compound to thicken. Thinner Lubricator is recommended to prevent this thickening and assure proper lubrication of the diamond particles. It is supplied in a convenient 4-ounce squeeze bottle.
- Applications / Function: Electrical / Electronic, Metal Working Fluid
-
Supplier: RS Components, Ltd.
Description: For use with polish, wax or diamond abrasive compounds. Ideal for polishing or super-finishing of metals, plastics etc. Shape = Ball Nose Overall Diameter = 25mm Shank Diameter = 6mm
- Applications: Polishing / Lapping (Very Fine Grits)
- Outer Diameter (OD): 0.9843 inch
-
Supplier: RS Components, Ltd.
Description: For use with polish, wax or diamond abrasive compounds. Ideal for polishing or super-finishing of metals, plastics etc. Shape = Conical Overall Diameter = 12mm Shank Diameter = 6mm
-
Supplier: TransPak
Description: Grease resistant, rubber compound withstands industrial cutting oils and chemicals. Large hole configuration facilitates drainage and resists clogging while mini-diamond studs on top surface minimize slippage. Yellow beveled border is permanently affixed to the mat. 7/8" thickness.
- Length: 124 inch
- Mat Type: Drainage Mat
- Width: 38 inch
Find Suppliers by Category Top
Featured Products Top
-
Watch>>A Thermal Management Solution for State-of-the-Art Electronics Key Take-Aways -Discover a thermal management material solution that provides "diamond like" thermal (read more)
Browse Thermal Compounds and Thermal Interface Materials Datasheets for MINTEQ® International Inc, Pyrogenics Group -
management material solution that provides "diamond like" thermal conduction without the "diamond" price • Understand why Pyroid® HT material solutions are ideal for high-volume production and provide economic value at the device assembly level • Learn how to optimize heat sinks and (read more)
Browse Thermal Compounds and Thermal Interface Materials Datasheets for MINTEQ® International Inc, Pyrogenics Group -
. HT pyrolytic graphite thermal spreaders and vias provides engineers high purity (>99.999%) and lightweight (2.25 g/cc) spreader options with exceptional thermal performance. HT material matches the heat spreading capability of CVD diamond at 1700 W/mK but at substantially better (read more)
Browse Thermal Compounds and Thermal Interface Materials Datasheets for MINTEQ® International Inc, Pyrogenics Group -
graphite thermal spreaders and vias provides engineers high purity (>99.999%) and lightweight (2.25 g/cc) spreader options with exceptional thermal performance. HT material matches the heat spreading capability of CVD diamond, with thermal conductivity up to 1700 W/mK, but at (read more)
Browse Thermal Compounds and Thermal Interface Materials Datasheets for MINTEQ® International Inc, Pyrogenics Group -
Advantages Excellent self-retention properties Easily installation for rapid assembly Can be manufactured in most compounds Narrow/tall cross section provides excellent sealing capabilities requiring minimum packaging space High sealing (read more)
Browse Elastomer and Rubber Shapes Datasheets for Zatkoff Seals & Packings -
Cri-Tech, Inc. manufactures custom resins and compounds to match your specifications. Formulation Development, Custom Rubber and Plastic Compounding, Color development & Specialty Toll Manufacturing. Cri-Tech 5,200 m2 state of the art facility has over 3,600 MTs of internal and twin (read more)
Browse Resins and Compounds Datasheets for Cri-Tech, Inc. -
Cri-Tech, Inc. announces the introduction of a new line of Cri-plastMPTM PFA Static Dissipative - High Flow Compounds. Specially formulated for injection molding and designed to meet your static dissipative/conductive, ATEX requirements in multiple applications (read more)
Browse Resins and Compounds Datasheets for Cri-Tech, Inc. -
At Cri-Tech, we don’t make Fluoro-materials such as PVDF, ETFE, EFEP, FEP & PFA … but we do make them better! We make unique Cri-plastMP compounds to meet your specific application, process, and tooling needs. While many compounders produce some Fluoro (read more)
Browse Resins and Compounds Datasheets for Cri-Tech, Inc. -
Escor™ ethylene and acrylic acid (EAA) copolymer resins offer excellent adhesion to polar substrates without the need for primers.
(read more)
Browse Resins and Compounds Datasheets for ExxonMobil - Polyethylene Products -
Multiple-Angle TOFD Wedge for HDPE Inspection
High Density Poly Ethylene (HDPE) pipe is now a popular substitute for steel pipe. Varieties of HDPE used in industry have an acoustic velocity range from ≈ 2100 m/s to ≈ 2600 m/s. Using PMMA or polystyrene as a refracting wedge material could result in very little to negative refraction. Our elastomeric materials range fro...
(read more)
Browse Resins and Compounds Datasheets for Innovation Polymers
Conduct Research Top
-
Managing Heat Transfer With Potting Compounds
and require additional power to operate. Molded plastics are used in place of metal enclosures due to cost control and weight savings. In most cases, these plastics are not as effective at transferring heat away from its source. Thermally conductive potting compounds are an effective way to control
-
EETimes.com | Electronics Industry News for EEs & Engineering Managers
debate, IBM Corp. is in talks with STMicroelectronics NV and Freescale Semiconductor Inc. to join the Crolles2 Alliance, according to a report. IQE buys Singapore wafer maker Welsh wafer supplier IQE plc has agreed to acquire MBE Technology Pte Ltd., a Singapore-based manufacturer of compound
-
EETimes.com | Electronics Industry News for EEs & Engineering Managers
Technology Pte Ltd., a Singapore-based manufacturer of compound semiconductor epitaxial wafers for a total consideration of S$23 million (about $15 million). Filtronic partners for work on diamond semiconductors Element Six Ltd., formerly DeBeers Industrial Diamonds Ltd., has created a subsidiary company
-
Ceramic-Backed Elbows and Ceramic-Lined Elbows Data Sheet
The "CERAM-BACK-ELBOW"TM has a jacket across the back of the core elbow which is approximately 1/2" of ceramic compound. This compound has a Mohs hardness of 9+, second only to diamond which has a Mohs hardness of 10. The ceramic jacket and core elbow is then wrapped with an exterior material
More Information Top
-
Fabrication Methods for Precision Optics
Diamond compounds or pastes are the most prevalent form of supply for diamond abrasives.
-
METALLOGRAPHY OF URANIUM: PROCEDURES AND STANDARDS
Mechanically polish the sample (when sample size permits) on a lap covered with a good grad? of polishing cloth (such as, A.B. Metcloth) using 6 -micron diamond compound as the abrasive.
-
Magnetism and Thermodynamics of Spin-1/2 Heisenberg Diamond Chains in a
Magnetic Field
FIG. 20: (Color online) A comparison of experimental re- sults for (a) the magnetic susceptibility, (b) the specific heat and (c) the magnetization process for the spin-1/2 diamond compound Cu3(CO3)2(OH)2 with the TMRG results.
-
ZCP2006ISTFA361
We used the following 2 sample preparation techniques for ease of IMC observation: Fine polishing process: Polishing the sample with diamond compound followed by silica.
-
http://dspace.mit.edu/bitstream/handle/1721.1/61501/HTL_TR_1962_019.pdf?sequence=1
L = 755 103 ft. lb. /lbm P = 1 atm Surface = 16 k gold polished on clothe wheel by No. 8 diamond compound f .
-
Diamond formation on carbon/carbon composite
Dipped in ( diamond compound Au + furfuryl alcohol) then dried in air.
-
Nickel-Diamond Compound Electroless Plating on Cast Aluminum Alloys
• Nickel- Diamond Compound Electroless Plating on Cast Aluminum Alloys p.265 .
-
Plastic Deformation of Aluminum Oxide by Indentation and Abrasion
Examination of single‐crystal and polycrystalline specimens showed that high densities of dislocations are produced within the near‐surface regions by mechanical polishing with a fine diamond compound (0.25 μm) and that plastic deformation by both slip and mechanical twinning occurs during the …
-
Metallographic Polishing by Mechanical Methods
Proprietary carrier pastes containing dia- mond abrasives are available from a number of commercial suppliers, who sometimes describe them, quite inappropriately, as diamond com- pounds .
-
Electronic Failure Analysis Handbook: Techniques and Applications for Electronic and Electrical Packages, Components, and Assemblies > METALLOGRAPHY
Recommended for all diamond compounds .