Sensors, Transducers and Detectors Reference Materials
Reference Articles 3001 - 3100 of 3153
- Levelflex M FMP 40 Level Measurement in Heavy Fuel
- Levelflex M FMP 40 Level Measurment of Waste Solvents
- Levelflex M FMP 40 Liquid Hexane Measurement
- Levelflex M High Temperature Measurement in Butane Diol
- Levelflex Measurement in Lime Silo
- Levelflex with Remote Housing for High Temperature Application
- Liquiphant and Nivotester (PFM) Overfill Protection for Critical Liquids
- Liquiphant M for Air Reduction in Food Processing
- Liquiphant M for Empty Pipe Detection in Jelly Production
- Liquiphant M for Empty Pipe Detection in PD Pump Protection
- Liquiphant M FTL 50 Limit Detection of Water
- Liquiphant M FTL 51 and Nivotester FTL 325P Limit Control
- Liquiphant M Replaces Flow Switch for Water Detection
- Liquiphant S High Temperature Overfill Protection
- Liquiphant S High Temperature Point Level Measurement in Asphalt Tanks
- Micropilot M and Levelflex M with Liquiphant Overfill Protection
- Micropilot M FMR 230 in Sludge Level Measurement
- Micropilot M FMR 230 Measurement of Lump Lime
- Micropilot M FMR 240 for Propylene Oxide Measurement
- Micropilot M FMR 240 Hot Water Measurement
- Micropilot M FMR 240 Level Measurement of Car Cleaning Agents
- Micropilot M FMR 240 Palm Oil/Fatty Acid
- Micropilot M FMR 244 Level Control in Boiling Reactor
- Micropilot M FMR 245 for Liquid Propylene Measurement
- Micropilot M FMR 245 Sulphuric Acid Measurement
- Micropilot M FMR 245 Toluene Diamine Measurement
- Micropilot M FMR 250 Level Measurement in Cement Powder
- Micropilot M FMR 250 Level Measurement in Dog/Cat Food
- Micropilot M FMR 250 Level Measurement in Stone Granulate
- Micropilot M FMR 250 Level Measurement of Corn Gluten
- Prosonic FMU 860 with FDU 81 Level Control
- Prosonic FMU 862 and FDU 82 Filter Control
- Prosonic Ultrasonic Level Measurement of Ground Meat
- Pump Control in Sugar-Water Mixer
- Radar FMR 130 with Purge on Asphalt Tanks
- Radar Level Measurement in Rain Water Retention Pond
- Radar Measurement in Bulk Hydrochloric Acid Storage Tank
- Radar Measurement in Bulk Sulfuric Acid Storage Tank
- Soliphant FTM 30 Switch Point for Blockage Detection
- Soliphant FTM 31 Switch Point for Blockage Detection
- Soliphant T FTM 20 Point Level Detection in Animal Feed Cooler
- Soliphant T FTM 20 Point Level Detection in Gypsum Plant
- Soliphant T FTM 20 Switch Point Control of Toothpaste Powder
- Soliphant with Solid/Liquid Interface Module in a Fly Ash De-Watering Bin
- Ultrasonic Level Control: Water in Sump of Cooling Tower
- Ultrasonic Water Level Measurement in Large Ponds
- Ammonia Gas Measurement
- FieldTool Used to Monitor Promass
- Liquisys M COM 253 with Oxymax W COS 41
- Promass 83F for Mass Flow Measurement of Liquefied Carbon Dioxide
-
Advances in Thermal Dispersion Mass Flow Meter Accuracy (.pdf)
Description: Thermal flow measuring technology has come a long way since the introduction of thermocouple technology and early hot wire anemometers. Thermal technologies depend on heat transfer and traditionally ...
-
Earth Resistance Measurement
Description: The main factors that should be considered in order to get an accurate earth resistance measurement in electrical systems are analyzed. The measurement system geometry, including minimum distances ...
- Applying Encoder Communications to Your Design
-
The Gas Company, Hawaii
From: Temposonics, LLCDescription: The Gas Company (TGC) is Hawaii's only full-service gas energy company, making gas products and services available to Hawaii's 1.3 million full-time residents and over 7 million visitors a year. TGC ...
-
Wood-Mizer's Cantilever Cutting Head
From: Temposonics, LLCDescription: Wood-Mizer®, the number one seller of sawmills worldwide, created portable sawmills in 1982. At that time, Wood-Mizer was the only company to use a cantilever-cutting head for its sawmills. This ...
- The End-of-Probe Algorithm
-
Speed of Response Curves (.pdf)
From: Conax TechnologiesDescription: It is the purpose of the information on this page to give you some general guidelines in estimating the speed of response you might expect from a thermocouple or an RTD. In defining any transient ...
-
Angular Displacement Transducer Use in Throttle Control
From: Trans-Tek, Inc.
-
How To Select a Continuous Solvent Vapor Monitor to Meet NFPA 86 Requirements
Description: This technical note assists operators in selecting a solvent vapor monitoring system that meets the requirements of NFPA 86. The system consists of three integral parts: *?The gas sample system that ...
- Let's Talk Accuracy
-
Load Cell Technical Information [Deflection, Spring Rate, and Natural Frequencies]
From: StrainsertDescription: These mechanical properties of the load cells are based on the installation of Figure 1, in which the outer rim of the cell is clamped to a heavy, rigid base which deflects negligibly under load, and ...
- Non-Contact Infrared Thermometers Frequently Asked Questions
- Obtain Acid/Base Concentration and Interphase Detection for CIP System Accurately
- Promass Provides Accuracy that Ensures Effective Boiling Procedure
-
Selecting Proper Audio Components for Medical Electronics
From: Star Micronics America
-
Understanding NFPA 86: Safety Ventilation and Continuous LFL Monitoring
Description: The National Fire Protection Association (NFPA) establishes fire safety standards, including standards for the safe operation of processes. NFPA 86, the Standard for Ovens and Furnaces, addresses the ...
- Virtual Absolute™ Technology
-
Why Nanopositioning Is More Than Just Nanometers
Description: This technote reports on recent advancements in nanopositioning technology, such as parallel kinematics, active trajectory control, new control algorithms for vibration suppression and tracking error ...
-
PT 101: Accelerometers Measure Slow Speed Rollers and Detect High Frequencies
Description: Successful vibration monitoring of paper machines depends on quality sensors, field proven for reliability. Accelerometers used in paper mill applications must survive harsh thermal, electrical and ...
-
PT 102: Low Frequency Vibration Measurements on a Compressor Gear Set
Description: The gear set on a critical turbo-compressor was monitored with a standard industrial accelerometer at very low frequencies. Severe vibrations at the hunting tooth frequency were found to be amplified ...
-
PT 104: Cooling Towers and Process Cooler Fans
Description: Cooling towers are a critical component in many power generation and chemical plants, and other process facilities. Catastrophic equipment failure can result in safety hazards, lowered production, and ...
-
RTD Tolerance Table (.pdf)
From: Conax TechnologiesDescription: RTD Tolerance table ...
-
Thermocouple Characteristics Table (.pdf)
From: Conax TechnologiesDescription: Thermocouple Characteristics Table ...
-
Thermocouple Tolerances Table (.pdf)
From: Conax TechnologiesDescription: Special tolerances below 0°C (32°F) are unofficial and are provided as a basis of discussion between Conax and our customers. ...
-
Thermocouple Wire Size and Resistance Table (.pdf)
From: Conax TechnologiesDescription: Resistance in Ohms per Double Foot at 68°F. ...
-
TN 14 Troubleshooting Accelerometer Installations
Description: Accelerometer based monitoring systems can be tested to verify proper installation and operation. Testing ensures data integrity and can identify most problems. The trouble shooting techniques ...
-
TN 18: Industrial Vibration Sensor Selection - Piezovelocity Transducers
Description: PiezoVelocity transducers have distinct advantages over traditional velocity pickups and piezoelectric accelerometers in many industrial monitoring applications. Onboard velocity integration overcomes ...
-
10 Tips To Ensure Accurate Temperature Measurement (.pdf)
From: Conax TechnologiesDescription: From choosing the right temperature sensor for your particular process application to the periodic recalibration of that temperature sensor, these tips can help you ensure temperature measurement ...
-
Adhesive Dispensing Units Manufactured by Johnstone Dispensing Systems
From: Temposonics, LLCDescription: Johnstone Dispensing Systems have a challenging application for their mastic regulator unit, which dispenses adhesives and sealers for the purpose of bonding and sealing various automobile body ...
- Advantages of Using IR Thermometers
-
AN104 4-20 mA Transmitters
From: Dataforth Corporation
-
AN105 RTD, Resistance Temperature Detector
From: Dataforth Corporation
-
AN106 Introduction To Thermocouples
From: Dataforth Corporation
-
Angular Displacement Transducer Use in Orthodontic Fixtures
From: Trans-Tek, Inc.
- Cerabar M Pressure Transmitter Aids in Monitoring Fermentation Process
-
Combustible Gas Safety Monitoring: Infrared vs. Catalytic Gas Detectors
From: General Monitors by MSADescription: When designing a combustible gas safety monitoring system for oil/gas, petrochemical or other applications, how do you decide whether to use infrared or catalytic gas detector technology? Both sensing ...
-
Controlling Tension over a Wide Tension Range (.pdf)
Description: Controlling tension over a wide tension range is possible, but often a challenge. There are various solutions for this situation which include utilizing multiple web paths with individual transducer ...
-
Correct Use of IR Thermometer
Description: This manual was written for people who are unfamiliar with noncontact infrared temperature measurement. A conscious attempt has been made to present the subject matter as briefly and simply as ...
- Deltapilot S Hydrostatic Pressure Sensors and Liquiphant Level Switches Monitor Storage Tank Levels
- Deltapilot S Recovers Fully from Temperature Changes in Less than Three Minutes
-
Determining Sensor Placement In A Thermal System
From: Watlow®Description: The Work Load - This is the material to be heated and is generally associated with a cycle time or a time rate of passage over or through the heated part. ...
- Dosimag Fulfills Repeatability Requirements for Filling Machine Maker
- Dosimag Offers Colgate Best Price, Reliability, and Repeatability
- Dosimag's Exceptional Repeatability and Cost Effectiveness Impress User
- Dosimag's Repeatability Stands Out in Extensive Testing
-
Effects of Process Temperature on LFL Measurement
Description: Many substances emit vapors that have potential to cause fire or explosion when mixed with air and a source of ignition. The minimum concentration of a substance needed to support combustion is known ...
-
Emissivity of Most Common Materials
Description: Emissivity is the measure of an object's ability to emit infrared energy. Emitted energy indicates the temperature of the object. Emissivity can have a value from 0 (shiny mirror) to 1.0 (blackbody). ...
-
Flow Instruments Based on Differential Pressures
From: Orange Research, Inc.
- Frequency Response
-
Fundamentals of Combustible Gas Detection
From: General Monitors by MSADescription: To develop an appropriate strategy for the implementation of a combustible gas detection system, a basic understanding of the properties of combustible materials is necessary. In our discussion we ...