20° Spur Gears
from KHK USA, Inc.
Small module brass spur gears suitable for mating with DS gears. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 15
- PD: 0.29
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 10
- PD: 5
from Hangzhou Chinabase Machinery Co., Ltd.
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 12 to 127
- Gear Center: Center Bore
from Chengdu Leno Machinery Co., Ltd.
Spur gear is a kind of structure of transmission gear, which has excellent performance in acceleration, braking and control. Spur gears are widely accepted as the most efficient gear transmission solution when power needs to be transferred to another mechanical device. Benefits. Spur gear is easy to... [See More]
- Pressure Angle: 20°
- Gear Center: Center Bore
- Number of Teeth: 18
- Material: Brass; Bronze; Steel; Stainless; Nylon
from KHK USA, Inc.
Low cost, mass-produced products suitable for light duty office machines. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 12
- PD: 0.24
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. Helical gears are comparable to spur gears, but due to the higher contact ratio, they are quieter, vibrate less, and experience less friction. Helical gear pairs have the same helix angle but opposite threads (left-hand and right-hand). Helical gears... [See More]
- Pressure Angle: 20°
- OD: 36
- Number of Teeth: 20
- Face Width: 18
from KHK USA, Inc.
These fine pitch, acetal spur gears have an integral stainless steel hub locking mechanism which enables the gear to be fastened to the shaft without any keys or set screws. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 1.97
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 100
- PD: 2.08
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- PD: 1.18
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 100
- PD: 0.83
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a made to order custom basis once current inventory runs out. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. In a gear train, the pinion shaft transfers applied force to the gears in the train. To increase their ability to tolerate more torque, we machine the pinion into a single piece of shafting. Material: 303 Stainless Steel [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 12
- PD: 0.10
from KHK USA, Inc.
Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a made to order custom basis once current inventory runs out. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 20
- Features: Ground Teeth
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 10. .104 FACE. 1/8, 3/16 & 1/4 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gears. - 303 Stainless Steel 2024-T4 or. -T351 Aluminum Alloy, anodized before cutting. - Bronze QQ-B-637 Alloy 464. Hubs. - 303 Stainless Steel Springs. - 302 Stainless... [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 100
- Features: Anti-backlash
from KHK USA, Inc.
The LS Sintered Spur Gears are made from pressed metal. These gears have a lower cost due to elimination of machining and reduction in wasted material. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 12
- PD: 0.24
from Stock Drive Products & Sterling Instrument - SDP/SI
You May Also Need: Shafts. Bearings. Couplings. AGMA 9. 1/4 & 3/8 FACE. 3/8 & 1/2 BORE. 20 ° PRESSURE ANGLE. MATERIAL: Gear - Cast Nylon 12 (PA12G). Knurled Core - 303 Stainless Steel. FEATURES: Self-lubricating. Quiet operation. Precision hobbed & machined. Integral metal core. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 20
- PD: 1.25
from KHK USA, Inc.
The MSGA & MSGB Ground Spur Gears are made from a chrome-alloy steel and are carburized and ground finished. This results in a high-strength, abrasion-resistant and compact designed Spur Gear. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Features: Ground Teeth
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 16
- PD: 1.00
from KHK USA, Inc.
Nylon teeth with steel hubs that can have keyways and set screws added. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 3.94
from Stock Drive Products & Sterling Instrument - SDP/SI
Inch Gears: AGMA 12, 10, 9, and 8. Available Pitches: 120 thru 16. Pressure Angles: 20 ° and 14.5 °. Metric Gears: ISO 5 thru 9. Available Modules: 0.3 thru 3. Pressure Angles: 20 ° and 14.5 °. For custom components or modifications. to a standard part, call us or submit an RFQ. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 20
- PD: 63.66
from KHK USA, Inc.
Possible to operate without lubrication. Suitable for food processing machines. Finished products for J Series are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 3.94
from Stock Drive Products & Sterling Instrument - SDP/SI
AGMA 7. 14-1/2 ° AND 20 ° PRESSURE ANGLE. MATERIAL: Steel. Call us: 516-328-3300. You May Also Need: Shafts. Bearings. Couplings [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 100
- PD: 40
from KHK USA, Inc.
Possible to operate without lubrication. Suitable for food processing machines. Finished products for J Series are also available. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Bore Diameter: 0.3940
from Stock Drive Products & Sterling Instrument - SDP/SI
Our plastic spur gears are available in a variety of materials, including: Acetal, Brass Insert. Acetal, Stainless Steel Hub. Acetal Rim, Aluminum Core. Bakelite. Nylon. With a variety of fastening styles, including: Fairloc ®. Hubless. Pin-Type Hub. You May Also Need: Shafts. Bearings. [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 100
- PD: 40
from KHK USA, Inc.
Nylon teeth with stainless steel hubs for rust-resistance. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 30
- PD: 1.18
from KHK USA, Inc.
The SS Spur Gears are made from carbon steel and are NOT hardened. However, the SS-H Spur Gears do have the gear teeth hardened. These Spur Gears are economically priced, general usage gears, with a large selection of modules and numbers of teeth. These Spur Gears are easily customizable and J... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 1.97
from KHK USA, Inc.
The SS FA Spur Gears are made from carbon steel and are NOT hardened. These Spur Gears are assembled with a locking hub for the most secure fastening to your shaft. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 6.02
from KHK USA, Inc.
The SSA Hubless Spur Gears are made from carbon steel and are NOT hardened. These Spur Gears are lighter weight due to their lack of a hub and are suitable for compact designs. These Hubless Spur Gears are easily customizable and J Series configurations of these Spur Gears are also... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 3.94
from KHK USA, Inc.
The SSA-F Hubless Spur Gears are made from carbon steel and are NOT hardened. These Hubless Spur Gears are assembled with a locking hub for the most secure fastening to your shaft. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- PD: 7.87
from KHK USA, Inc.
The SSAG Hubless Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These Spur Gears are lighter weight due to their lack of a hub and are suitable for compact designs. These Hubless Spur Gears are easily customizable since the heat treatment is applied... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 25
- PD: 0.98
from KHK USA, Inc.
The SSAY Hubless Spur Gears are made from carbon steel and are NOT hardened. These Spur Gears are designed with a narrower face width than the SSA Series Spur Gears. These Spur Gears are suitable for light-duty applications. These Spur Gears are easily customizable. Please note that all J-Series,... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 28
- Bore Diameter: 0.2360
from KHK USA, Inc.
The SSG Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. Since the heat treatment is applied only to the tooth area, secondary operations can be preformed on the hub and bore. J Series configurations of the SSG Ground Spur Gears are available. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 30
- Features: Ground Teeth
from KHK USA, Inc.
The SSG-R Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These pinions are designed to mate with Nabtesco Gearheads. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 50
- Features: Ground Teeth
from KHK USA, Inc.
The SSG FA/FB Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These Spur Gears are assembled with a locking hub for the most secure fastening to your shaft. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 100
- Features: Ground Teeth
from KHK USA, Inc.
The SSG-R Ground Spur Gears are made from carbon steel, are induction hardened and the teeth are ground finished. These pinions are designed to mate with Nabtesco Gearheads. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order,... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 30
- Features: Ground Teeth
from KHK USA, Inc.
The SSGS Ground Shaft Pinions are Spur Gears made from carbon steel, are induction hardened, and the teeth are ground finished. The shaft ends are not hardened specifically to allow modification of shafts to fit your bearings. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 10
- PD: 0.59
from KHK USA, Inc.
Allows large gear ratios. Can also be used as segment gears and corner racks. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 120
- PD: 9.45
from KHK USA, Inc.
The SSS Shaft Pinions are Spur Gears made from carbon steel and are NOT hardened. Please note that all J-Series, E-Series, F-Series, H-Series, HJ-Series & S-Series products are made-to-order, noncancellable, and non-returnable. Notice: This product is discontinued, but will be available on a... [See More]
- Pressure Angle: 20°; 20 º
- Design: Metric
- Number of Teeth: 10
- PD: 0.20
from ATLANTA Drive Systems, Inc.
Welcome to the widest range of standard racks & pinions in the World! Consisting of both helical & straight (spur) tooth versions, in an assortment of sizes, materials and quality levels, to meet almost any axis drive requirements. These drives are perfect for a wide range of applications,... [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 25
- Features: Ground Teeth; Anti-backlash (optional feature)
from W.M. Berg
Spur Gears are the most recognized style of gear. Spur Gears are used exclusively to transmit rotary motion between parallel shafts, while maintaining uniform speed and torque. The involute tooth form, being the simplest to generate, permits high manufacturing tolerances to be attained. Pitch: 12 to... [See More]
- Pressure Angle: 20°
- Bore Diameter: 0.2500
- PD: 0.75
- Material: Stainless
from Grob, Inc.
Grob ’s spur gear stock allows you the flexibility to create cold rolled spur gears that meet your exact specifications. We do this by creating long bar lengths of spur gear stock which allows you to cut or machine your steel spur gear to the lengths you need. Standard Spur Gears. Available in... [See More]
- Pressure Angle: 14.5°; 20°
- PD: 6.00 to 48.00
- Design: English
- OD: 6
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 109
- Gear Center: Center Bore
from QTC METRIC GEARS
Module 0.5, 15 Teeth Brass Spur Gear with Finished Bore [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 15
- PD: 7.5
from Martin Sprocket & Gear, Inc.
Martin manufactures spur gears and gear rack, bevel gears, miter gears and worm gears. With a vast inventory of raw materials, modern machine tool capacity, and a pro-service attitude, Martin makes short work of a quick delivery on all specialty gears. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 12
- Gear Center: Center Bore
from Huco Dynatork
Injection moulded gears with machined bores. Pressure angle is 20 °. Suitable for running temperatures up to 100 °C with an intermittent temperature limit of 150 °C. High strength and low friction coefficient make these gears a popular choice for many applications, including underwater [See More]
- Pressure Angle: 20°
- Gear Center: Center Bore
- Design: Metric
- Module: Mod 0.5 - Mod 3
from ATLANTA Drive Systems, Inc.
We have recently expanded our range of ISO 9409-1-A flanged pinions. This allows the machine designer the flexibility of choosing the best flanged pinion to meet the application needs. The new TR flanged pinions have compact designs to reduce the amount of drive torque required. Traditionally,... [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 17
- Features: Ground Teeth; Anti-backlash (optional feature)
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 18
- Gear Center: Center Bore
from QTC METRIC GEARS
Module 1, 45 Tooth, Duracon Spur Gear with Stainless Fairloc Hub [See More]
- Pressure Angle: 20°
- Design: Metric
- Number of Teeth: 45
- PD: 45
from Martin Sprocket & Gear, Inc.
Cast iron spur gears, 20 pressure angle, 10DP, with hubs [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 100
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 28
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 30
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 32
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 48
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 52
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 56
- Gear Center: Center Bore
from Tiny-Clutch | Helander Products, Inc.
We have a wide variety of gears available, they can be added to our clutches or purchased separately. [See More]
- Pressure Angle: 20°
- Design: English
- Number of Teeth: 86
- Gear Center: Center Bore