Compression Gas Springs
from Dayton Lamina Corporation
High Force - Long Life - High Cycle Rate. Strokes ranging from 6mm/.24" to 300mm/11.8". Contact forces from 15.0 lbs. to 41,000 lbs. Range of operating temperature: -25 degrees F to 180 degrees F. Manufactured in ISO 9001 certified plant [See More]
- Absorption / Damping Action: Compression
- Maximum Force (P1): 15 to 41000
- Stroke: 0.2400 to 11.8
- Dampening Method: Gas
from ACE Controls Inc.
Robust powerhouse: the CB63 to 160 series with internal system seals are used in heavy duty areas for emergency stop. Even dirt or scratches to the piston rod do not lead to a leakage or failure. Compressed gas accumulators allow return forces of up to 22,481 lb. (100 kN) in the CB models, which can... [See More]
- Absorption / Damping Action: Compression; Extension
- Maximum Force (P1): 105000
- Stroke: 7.87 to 23.62
- Dampening Method: Gas
from Industrial Gas Springs, Inc.
This range of compression gas springs covers a wide range of strokes and forces and will meet the requirements of most applications. Strokes range from 2.4" to 20" and forces from 9 to 1120 lbs. All are available with Release Valves . If uncertain of the force required, order the spring charged to... [See More]
- Absorption / Damping Action: Compression; Extension
- Compressed Length: 15.08
- Stroke: 10
- Extended Length: 25.08
from Industrial Gas Springs, Inc.
A flexible locking gas spring has nitrogen gas on both sides of the piston. Gas is compressible so if sufficient force is applied to the rod when it is in its locked state, either in tension or compression, the gas will compress and the strut rod will move a few millimeters from its locked position. [See More]
- Absorption / Damping Action: Compression; Extension
- Maximum Force (P1): 34 to 270
- Stroke: 4
- Dampening Method: Gas; Hydraulic (optional feature)
from Industrial Gas Springs, Inc.
Micro compression gas springs offer users many advantages due their small size and low force. The table below shows our standard sizes. Micro springs are also available in 316 stainless steel and in custom strokes and lengths. All are charged to the force specified by the user. [See More]
- Absorption / Damping Action: Compression; Extension
- Compressed Length: 2.86
- Stroke: 1
- Extended Length: 3.86
from Industrial Gas Springs, Inc.
Compression gas spring, nitrogen charged [See More]
- Absorption / Damping Action: Compression; Extension
- Compressed Length: 6.41
- Stroke: 2.4
- Extended Length: 8.81