CSA Mark (US, C and US, NRTL/C) PCB Terminal Blocks
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Finder S.p.A. con unico socio
Type 93.11 PCB socket with retain and release clip. Suitable for relays 34.51, 34.81. Features include: Nominal rating: 6 A – 250 V. Dielectric strength: ≥ 6 kV (1.2/50 μs) between coil and contacts. Protection category: IP 20. Ambient temperature: ° C –40 … + 70 [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); IMQ-grande, CE-2, EAC-1, CSA, cRUus, ukca, RINA
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
Features: Interlocking Sectional Design. Stainless Steel Spring. Front to Rear Pin Spacing, 5mm (.197 in.). Multipole Assemblies Supplied with End Plate Installed. Housing Material: Polyamide 6.6. Standard Color: Light Gray [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 1
from Finder S.p.A. con unico socio
Type 94.02 PCB socket for use with Type 55.32 relays. Approvals according to Type. [See More]
- Approvals: CSA Mark (US, NRTL/C); IMQ-grande, EAC-1, CSA, cRUus, ukca, RINA
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 30
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
Features: Interlocking Sectional Design. Stainless Steel Spring. Front to Rear Pin Spacing, 5mm (.197 in.). Multipole Assemblies Supplied with End Plate Installed. Housing Material: Polyamide 6.6. Standard Color: Light Gray [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 1
from Finder S.p.A. con unico socio
Type 94.03 PCB socket for use with Type 55.33 relays. Approvals according to Type. [See More]
- Approvals: CSA Mark (US, NRTL/C); EAC-1, IMQ-grande, CSA, cRUus, ukca, RINA
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
Horizontal and vertical open end headers offer different wire entry options and enhance plug accessibility. Ideal for applications where board real estate is limited or where high density wiring is required. Features: Multipole, Modular Construction. High Density. Horizontal or Vertical, Open Ends. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 4
from Finder S.p.A. con unico socio
Type 94.04 screw terminal (box clamp) socket used with Type 55.34 and 55.34 relays. Approvals according to Type. [See More]
- Approvals: CSA Mark (US, NRTL/C); IMQ-grande, EAC-1, cRUus, CSA, ukca, RINA
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
Horizontal and vertical open end headers offer different wire entry options and enhance plug accessibility. Ideal for applications where board real estate is limited or where high density wiring is required. Features: Multipole, Modular Construction. High Density. Horizontal or Vertical, Open Ends. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 4
from Finder S.p.A. con unico socio
Type 95.23 PCB socket (for changeover contacts only), For use with Type 43.41 relay. Features include: Nominal rating 12 A – 250 V. Insulation 6 kV (1.2/50 µs) between coil and contact. Protection category IP 20. Ambient temperature ° C –40 … + 70 [See More]
- Approvals: CSA Mark (US, NRTL/C); EAC-1, CSA, cRUus, ukca
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
Altech is pleased to announce a new, more extensive printed circuit board terminal block line.This line offers the standard single and double level fixed and pluggable terminal blocks in metric and US pin spacings. However, this product line goes beyond our past standard offering.There is now a... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Finder S.p.A. con unico socio
Type 96.12 PCB for use with Type 56.32 relays. Accessories: Metal retaining clip. (supplied with socket – SMA packaging code) 094.51. Features include: Nominal rating 15 A – 250 V. Dielectric strength 2 kV AC. Protection category IP 20. Ambient temperature ° C –40 … + 70 [See More]
- Approvals: CSA Mark (US, NRTL/C); IMQ-grande, EAC-1, CSA, cRUus, ukca
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.50
from Altech Corp.
Altech is pleased to announce a new, more extensive printed circuit board terminal block line.This line offers the standard single and double level fixed and pluggable terminal blocks in metric and US pin spacings. However, this product line goes beyond our past standard offering.There is now a... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Finder S.p.A. con unico socio
Type 96.14 PCB for use with Type 56.34 relays. Accessories: – Metal retaining clip (supplied with socket – SMA packaging code) 094.51. Features include: Nominal rating 15 A – 250 V. Dielectric strength 2 kV AC. Protection category IP 20. Ambient temperature ° C –40... [See More]
- Approvals: CSA Mark (US, NRTL/C); CSA, EAC-1, cRUus, ukca
- Operating Temperature: -40 to 70
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 9.80
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 6.35
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Use Double Level where space requirements call for high density wiring. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 6.35
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 30
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 6.35
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 6.35
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Use Double Level where space requirements call for high density wiring. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 4
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 6.35
from Altech Corp.
Altech is pleased to announce a new, more extensive printed circuit board terminal block line.This line offers the standard single and double level fixed and pluggable terminal blocks in metric and US pin spacings. However, this product line goes beyond our past standard offering.There is now a... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks; Closed Barrier Terminal Blocks
- Contacts Pitch: 6.35
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Use Double Level where space requirements call for high density wiring. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 4
from BlockMaster Electronics, Inc.
BlockMaster Electronic ’s Single Row and Tri-Barrier Terminal Blocks are available from 10A-50A, up to 300V. 6.35mm up to 13mm, with solder and PC terminals, straight and right angle. Some parts have available mounting ends for added placement security. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; ROHS
- # of Contacts: 2 to 32
- Terminal Block Type: Power Distribution Blocks
- Contacts Pitch: 7.62
from Altech Corp.
For wire to board connections in AC power applications where a high current connection (up to 30 Amps) is required and where frequent terminations occur. Popular 1/4" and 3/8" pin spacings provide replacements for outdated PC board barrier strips. Features: Multipole, Modular Design. Housing... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
For wire to board connections in AC power applications where a high current connection (up to 30 Amps) is required and where frequent terminations occur. Popular 1/4" and 3/8" pin spacings provide replacements for outdated PC board barrier strips. Features: Multipole, Modular Design. Housing... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
For wire-to-board connections in industrial applications and where frequent wire terminations occur. Use Double Level where space requirements call for high density wiring. Features: Multipole, Modular Design. Housing Material: Polyamide 6.6. Standard Color: AKZ300 is Gray, all others are green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
Horizontal or vertical headers offer different wire entry options and enhance plug accessibility. Closed end headers help prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Horizontal and Vertical. Open and Closed Ends. Housing Material: Polyamide 6.6. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
Horizontal or vertical headers offer different wire entry options and enhance plug accessibility. Closed end headers help prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Horizontal and Vertical. Open and Closed Ends. Housing Material: Polyamide 6.6. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
Horizontal or vertical headers offer different wire entry options and enhance plug accessibility. Closed end headers help prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Horizontal and Vertical. Open and Closed Ends. Housing Material: Polyamide 6.6. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
Horizontal or vertical headers offer different wire entry options and enhance plug accessibility. Closed end headers help prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Horizontal and Vertical. Open and Closed Ends. Housing Material: Polyamide 6.6. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
The 45 ° header orientation facilitates plug insertion and removal in hard to access spaces. Closed end headers prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Open and Closed Ends. Housing Material: Polyamide 6.6. Standard Color: Green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
The 45 ° header orientation facilitates plug insertion and removal in hard to access spaces. Closed end headers prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Open and Closed Ends. Housing Material: Polyamide 6.6. Standard Color: Green [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
Horizontal or vertical headers offer different wire entry options and enhance plug accessibility. Closed end headers help prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Horizontal and Vertical. Open and Closed Ends. Housing Material: Polyamide 6.6. [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from Altech Corp.
Horizontal or vertical headers offer different wire entry options and enhance plug accessibility. Closed end headers prevent misplugging. Features: Multipole, Single Mold Construction. Industry Standard Compatible. Horizontal and Vertical, Closed Ends. Housing Material: Polyamide 6.6. Standard... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); VDE Component Mark; IEC
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through; PCB Terminal Blocks
- # of Contacts: 2
from NSI Industries LLC
INSULATED TYPE. WHITE COLOR. 0.669 INCH BLOCK WIDTH. 22 TO 12 AWG, 20 TO 18 AWG WIRE SIZE. UL, CSA APPROVAL. 300 V VOLTAGE RATING. 10 AMPERE, 20 AMPERE CURRENT RATING. 110 DEG C TEMPERATURE RATING. NYLON HOUSING MATERIAL. WIRE CLAMP WITH SCREW TERMINAL TYPE. TERMINAL BLOKS[TM] BRAND. OVERALL... [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark
- North American: 12 to 22
- Termination Options: Screw Clamp
- Voltage Rating: 300
from LMI Components, Inc.
EDGE CARD TERMINAL BLOCK CONNECTOR PCB & PANEL MOUNT [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark
- # of Contacts: 24
- Termination Options: Screw Clamp
- Contacts Pitch: 5.08
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MKDS 3/ 3-5.08 BK ANGEZ.SCHR. [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 3
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 1.19 INCH L X 0.56 INCH W X 0.56 INCH H SIZE. 16 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 150 V VOLTAGE RATING. PCB MOUNTING. 15 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. #6-32 X 3/16 INCH SLOT SCREW TERMINAL TYPE. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: ? to 16
from Excel Cell Electronic USA Corp.
Pitch: 3.5, 7.0 mm , wire cage: nickel plated over zinc alloy [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian)
- Termination Options: Screw Clamp
- Terminal Block Type: Single Feed Through
- # of Contacts: 3
from Amphenol PCD
Heavy Duty. Multi-tier, .200" spacing heavy duty terminal blocks are rated at 20A, and combine a larger wire accommodation range and and higher current rating with the enhanced board density provided by the multi-tier design. Moving cage clamp wire termination ensures high reliability. Interlocking... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 22
- Termination Options: Cage Clamp
- Contacts Pitch: 5.08
from LMI Components, Inc.
EDGE CARD TERMINAL BLOCK CONNECTOR PCB & PANEL MOUNT [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark
- # of Contacts: 24
- Termination Options: Screw Clamp
- Contacts Pitch: 5.08
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MKDS 3/ 6 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 6
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 0.81 INCH L X 0.56 INCH W X 0.56 INCH H SIZE. 16 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 150 V VOLTAGE RATING. PCB MOUNTING. 15 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. #6-32 X 3/16 INCH SLOT SCREW TERMINAL TYPE. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: ? to 16
from Amphenol PCD
Heavy Duty. Multi-tier, .200" spacing heavy duty terminal blocks are rated at 20A, and combine a larger wire accommodation range and and higher current rating with the enhanced board density provided by the multi-tier design. Moving cage clamp wire termination ensures high reliability. Interlocking... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Termination Options: Cage Clamp
- Terminal Block Type: Dual level
- Contacts Pitch: 5.08
from LMI Components, Inc.
EDGE CARD TERMINAL BLOCK CONNECTOR PCB & PANEL MOUNT [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark
- # of Contacts: 25
- Termination Options: Screw Clamp
- Contacts Pitch: 5.08
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MK3DS 1/ 3-3.81 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 3
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 1.41 INCH L X 0.64 INCH W X 0.76 INCH H SIZE. 16 TO 14 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 300 V VOLTAGE RATING. PCB MOUNTING. 20 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. PRINTED CIRCUIT PIN WITH #8-32 X 3/16... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: 14 to 16
from Amphenol PCD
Identical in all respects to the 2-tier EL2M family shown on page 60 (facing), except that the upper row is offset to the right, providing additional system I/O and packaging alternates. Users have the option of purchasing modules separately, and assembling to size in-house, in order to minimize... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Termination Options: Cage Clamp
- Terminal Block Type: Dual level; I/O Block
- # of Contacts: 6 to 44
from LMI Components, Inc.
EDGE CARD TERMINAL BLOCK CONNECTOR PCB & PANEL MOUNT [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark
- # of Contacts: 25
- Termination Options: Screw Clamp
- Contacts Pitch: 5.08
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MKDSP 1.5/ 2 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 2
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 0.53 INCH L X 0.64 INCH W X 0.76 INCH H SIZE. 16 TO 14 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 300 V VOLTAGE RATING. PCB MOUNTING. 20 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. PRINTED CIRCUIT PIN WITH #8-32 X 3/16... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: 14 to 16
from Amphenol PCD
Enhanced Density. Multi-tier 5.0mm spacing terminal blocks are rated at 13.5A and combine low profile with the enhanced board density provided by the multi-tier design. Moving cage clamp wire termination ensures high reliability. Interlocking Modules. Blocks range to 3 tiers high and are are... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Termination Options: Cage Clamp
- Terminal Block Type: Dual level (optional feature); Three Level (optional feature)
- # of Contacts: 6 to 36
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MKDSP 1.5/ 4 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 4
from Marathon Special Products
. ONE PIECE, DOUBLE ROW TYPE. 0.75 INCH L X 0.63 INCH W X 0.429 INCH H SIZE. 20 TO 18 AWG WIRE SIZE. UL 508, UL 1059, CSA, CE APPROVAL. 300 V VOLTAGE RATING. PCB MOUNTING. 5 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. PRINTED CIRCUIT PIN WITH #2-56... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: 18 to 20
from Amphenol PCD
Enhanced Density. Multi-tier, 5.0mm spacing terminal blocks are rated at 17.5A and provide enhanced board density as well as system flexibility. Moving cage clamp wire termination ensures high reliability. Interlocking Modules. Blocks range to 3 tiers high and are are available in five different... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Termination Options: Cage Clamp
- Terminal Block Type: Dual level (optional feature); Three Level (optional feature)
- # of Contacts: 6 to 36
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks SMKDS 2.5/ 8-5.08 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 8
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 0.75 INCH L X 0.41 INCH W X 0.435 INCH H SIZE. 20 TO 18 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 300 V VOLTAGE RATING. PCB MOUNTING. 5 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. PRINTED CIRCUIT PIN WITH #2-56 X 0.22... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: 18 to 20
from Amphenol PCD
Enhanced Density. Multi-tier, 5.0mm spacing terminal blocks are rated at 24A and provide high current capacity and enhanced board density as well as system flexibility. Moving cage clamp wire termination ensures high reliability. Interlocking Modules. Blocks range to 3 tiers high and are are... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Termination Options: Cage Clamp
- Terminal Block Type: Dual level (optional feature); Three Level (optional feature)
- # of Contacts: 6 to 36
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MKDS 1.5/15 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 15
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 1.03 INCH L X 0.56 INCH W X 0.54 INCH H SIZE. 22 TO 16 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 150 V VOLTAGE RATING. PCB MOUNTING. 15 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. SOLDER PIN WITH #5-40 UNC X 0.19 INCH... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: 16 to 22
from Amphenol PCD
The .200" (5.08mm) 4-tier ESTT, aimed at maximum board density or unique packaging requirements, is the tallest vertical block available. Blocks feature moving cage clamp wire terminations. Supplied pre-assembled to size, and available only in black. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Termination Options: Cage Clamp
- Terminal Block Type: Four Level
- # of Contacts: 8 to 48
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks SMKDS 1/14-3.5 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 14
from Marathon Special Products
. ONE PIECE, SINGLE ROW TYPE. 1.19 INCH L X 0.69 INCH W X 0.69 INCH H SIZE. 16 TO 14 AWG WIRE SIZE. UL 1059, CSA, CE APPROVAL. 150 V VOLTAGE RATING. PCB MOUNTING. 20 AMPERE CURRENT RATING. NO COVER TYPE. 150 DEG C TEMPERATURE RATING. PHENOLIC HOUSING MATERIAL. SOLDER PIN WITH #6-32 UNC X 0.25 INCH... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Listing Mark
- Body Material: PHENOLIC
- Termination Options: Screw Clamp
- North American: 14 to 16
from Amphenol PCD
High Board Density. The angled .200" (5.08mm) low profile ELMM series incorporates a 45 ° angle to maximize use of space by allowing terminal blocks to be stacked front-to-back, providing users full access to wires and screws even when the blocks are fully wired. The angled wire entry also... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 20
- Termination Options: Screw Clamp
- Contacts Pitch: 5.08
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks PTSA 1.5/ 3-3.5-Z OG [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, VDE, GOST-R
- Termination Options: Push-In
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 3
from Amphenol PCD
ELM 5.0mm spacing wire-to-board moving cage clamp terminal blocks are available in vertical, horizontal and angled wire entry variations. Interlocking Modules. The ELM family consists of precision molded 2- and 3-position screw termination modules with interlocking dovetails. Modules can be joined... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 20
- Termination Options: Screw Clamp
- Contacts Pitch: 5.00
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks FFKDSA1/V-2.54-5 [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; VDE Component Mark; C-UR-US, CSA, CUL, UL
- Termination Options: Spring Clamp; Spring Cage
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 5
from Amphenol PCD
ELM 5.0mm spacing wire-to-board moving cage clamp terminal blocks are available in vertical, horizontal and angled wire entry variations. Interlocking Modules. The ELM family consists of precision molded 2- and 3-position screw termination modules with interlocking dovetails. Modules can be joined... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 20
- Termination Options: Screw Clamp
- Contacts Pitch: 5.00
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MFKDSP/ 6-5.08 [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Spring Clamp; Spring Cage
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 6
from Amphenol PCD
ELVM .150" spacing wire-to-board terminal blocks are available in vertical, horizontal and angled wire entry variations. SMT Compatibility. The ELVM is suitable for SMT reflow solder PCB manufacturing processes as well as wave solder, providing users with additional flexibility and maximizing... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.81
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks MKDS 5/ 3-9.5 A0 BK [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 3
from Amphenol PCD
ELVM .150" spacing wire-to-board terminal blocks are available in vertical, horizontal and angled wire entry variations. SMT Compatibility. The ELVM is suitable for SMT reflow solder PCB manufacturing processes as well as wave solder, providing users with additional flexibility and maximizing... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.81
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks 5mm 2P FIXED 1-2 LEFT TO RIGHT [See More]
- Approvals: CSA Mark (US, NRTL/C); VDE Component Mark; C-UR-US, CSA, GOST-R
- Termination Options: Screw Clamp; Screw
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 2
from Amphenol PCD
ELVM .150" spacing wire-to-board terminal blocks are available in vertical, horizontal and angled wire entry variations. SMT Compatibility. The ELVM is suitable for SMT reflow solder PCB manufacturing processes as well as wave solder, providing users with additional flexibility and maximizing... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.81
from VAST STOCK CO., LIMITED
Fixed Terminal Blocks FFKDSA1/V-3.81-17 [See More]
- Approvals: CSA Mark (US, NRTL/C); UL Listing Mark; VDE Component Mark; CSA, CUL, UL
- Termination Options: Spring Clamp; Spring Cage
- Terminal Block Type: Fixed Terminal Blocks
- # of Contacts: 17
from Amphenol PCD
ELXM 3.5mm spacing wire-to-board terminal blocks are available in vertical, horizontal and angled wire entry variations. SMT Compatibility. The ELXM is suitable for SMT reflow solder PCB manufacturing processes as well as wave solder, providing users with additional flexibility and maximizing... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.50
from Amphenol PCD
ELXM 3.5mm spacing wire-to-board terminal blocks are available in vertical, horizontal and angled wire entry variations. SMT Compatibility. The ELXM is suitable for SMT reflow solder PCB manufacturing processes as well as wave solder, providing users with additional flexibility and maximizing... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.50
from Amphenol PCD
ELXM 3.5mm spacing wire-to-board terminal blocks are available in vertical, horizontal and angled wire entry variations. SMT Compatibility. The ELXM is suitable for SMT reflow solder PCB manufacturing processes as well as wave solder, providing users with additional flexibility and maximizing... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.50
from Amphenol PCD
Lowest Height-off-Board. The .150"/3.5mm-pitch ESB line offers the lowest height off the board —.335"/8.5mm —of any screw terminal block in any spacing. This minimal profile can be of critical importance in tight packaging configurations. Moving Cage Clamp. Blocks feature moving cage... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 24
- Termination Options: Screw Clamp
- Contacts Pitch: 3.81
from Amphenol PCD
Modular Construction. The .5.0mm (.197") low profile ESLM series terminal block features moving cage clamp wire termination and modular construction. The terminal blocks are molded as 2- to 24-position modules with interlocking dovetails and can be assembled to length without loss of pin spacing. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 24
- Termination Options: Cage Clamp
- Contacts Pitch: 12.70
from Amphenol PCD
True Surface-Mount. True surface-mount terminal blocks facilitate board assembly. Tin-lead plated solder contact tabs are specifically designed for compatibility with SMT reflow solder installation. Fastening Options. SMT terminal blocks must be securely and independently fastened to the board in... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 10
- Termination Options: Screw Clamp
- Contacts Pitch: 3.50
from Amphenol PCD
The integrally molded locking ears are available with ELVP and ELVT plugs, and ELVH series headers. Plug ears hold a captive floating, slot-head locking screw that engages a threaded insert on the header ear. The mounting screw is tightened after plug and header are firmly mated, securing the... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 20
- Terminal Block Type: Header
- Contacts Pitch: 3.81
from Amphenol PCD
ELXH headers are molded of ultra-high-temperature polyamide, which will withstand temperatures to 260°C during the PCB production process, and are compatible with SMT reflow soldering as well as wave soldering processes. The headers are available in vertical and horizontal versions. A shrouded... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 24
- Terminal Block Type: Header
- Contacts Pitch: 3.50
from Amphenol PCD
The integrally molded locking ears are available with ELXP and ELXT plugs, and ELXH series headers. Plug ears hold a captive floating, slot-head locking screw that engages a threaded insert on the header ear. The mounting screw is tightened after plug and header are firmly mated, securing the... [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- # of Contacts: 2 to 24
- Terminal Block Type: Header
- Contacts Pitch: 3.50
from Amphenol PCD
Terminal block series on popular .250" spacing. Accepts 10 AWG, rated at 32A/300V. Horizontal and angled configurations are available. Moving cage clamp wire termination. Supplied as 2- and 3-position modules with interlocking dovetails, or assembled to size. Available in black only. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Contacts Pitch: 6.35
- Termination Options: Cage Clamp
- Body Material: Polyamide 6/6, UL94V-0
from Amphenol PCD
Terminal block series on popular .250" spacing. Accepts 10 AWG, rated at 32A/300V. Horizontal and angled configurations are available. Moving cage clamp wire termination. Supplied as 2- and 3-position modules with interlocking dovetails, or assembled to size. Available in black only. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Contacts Pitch: 6.35
- Termination Options: Cage Clamp
- Body Material: Polyamide 6/6, UL94V-0
from Amphenol PCD
ELF Series plugs mate with ELF Series headers, and accommodate competitive headers as well. Precision molded housings allow wire termination while the connector is either plugged or unplugged. [See More]
- Approvals: CE Conformity Marks; CSA Mark (US, NRTL/C); UL Recognized Component Mark (US and Canadian); TUV Certification
- Contacts Pitch: 5.00
- # of Contacts: 2 to 24
- Body Material: PPO, UL 94V-0