Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: NewAge Industries
Description: not change. FEP & PFA are clearer and can be heat sealed and heat bonded. Permanent color striping, etching, and longer-than-listed lengths are available through minimum order. Polyethylene- jacketed, thin-wall fluoropolymer tubing, for low-cost purity, is also available through
- Application: Chemical, Cryogenic, Food Processing / Beverage, Medical / Pharmaceutical, Water
- Materials: PTFE, Fluoropolymer (PFA, FEP, etc.), Other
- Maximum Inside Diameter / Size: 0.1250 inch
- Minimum Bend Radius: 1 inch
-
Supplier: Saint-Gobain Tape Solutions
Description: PFA Fluoropolymer Film Fluoropolymer Film CHEMFILM® PFA film is manufactured from perfluoroalkoxy (PFA) polymer resin. PFA film offers the highest continuous use temperature (260 °C, 500 °F) of any melt-processable fluoropolymer film. CHEMFILM®
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Elongation: 300 %
- Industry: Aerospace, Electric Power, Medical / Food (FDA, USDA), General Industrial
- Material Type / Grade: Dielectric / Electrically Insulating
-
Supplier: Western Analytical Products
Description: All Prices per Foot
- Design Units: English
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 0.0200 inch
- Outside Diameter / Size: 0.0625 inch
-
-
Supplier: Saint-Gobain Composite Solutions
Description: PFA-PG, general purpose fluoropolymer film is manufactured by Saint-Gobain Specialty Films from perfluoroalkoxy (PFA) polymer resin. This film offers the highest continuous use temperature 260°C (500°F) of any melt-processable fluoropolymer film, PFA film offers
- Dielectric Constant: 2.1
- Dielectric Strength: 1.85E8
- Material Form: Film / Sheet, Polymer (Plastic / Elastomer)
-
Supplier: Swagelok Company
Description: Achieve flexibility, visibility, and reliability with Swagelok PFA flexible tubing for your lab environments and other applications.
- Application: High Purity
- Design Units: English, Metric
- Finish: Solid
- Materials: Fluoropolymer (PFA, FEP, etc.)
-
Supplier: Accuris
Description: STANDARD SPECIFICATION FOR PERFLUOROALKOXY (PFA)-FLUOROPOLYMER TUBING
-
Supplier: Grayline, Inc.
Description: Grayline offers a wide range of non-heat shrinkable wire harness and electrical application tubing products that are made from a variety of materials including many PVC compounds, polyolefin, polyurethane (TPU), polyethylene (PE), polypropylene (PP), and fluoropolymers (PTFE, PFA,
- Application: General Purpose
- Finish: Translucent, Multi-colored
- Function: Electrical Tubing / Sheathing
- Material Choices: Plastic Tubing
-
Supplier: NewAge Industries
Description: Made of chemically inert clear FEP Manufactured from FDA compliant materials Heat set into a retractable coil; excellent recoil memory Offers all the chemical and electrical insulation properties of standard FEP fluoropolymer tubing
- Application: Chemical, Medical / Pharmaceutical, Water
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Temperature Range: 200 F
-
Supplier: AGC Chemicals Americas, Inc.
Description: Fluon® PFA (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethyl ene (PTFE), yet can be processed by
- Chemistry: Fluoropolymers (PTFE, FEP, MFA, etc.), Resin Base / Polymer Binder
- Features: Flame Retardant / UL 94V-0 Rated, Other
- Operating / Use Temperature: -328 to 500 F
- Surface Location / Orientation: Other
-
Supplier: Grayline, Inc.
Description: Grayline medical tubing is available in a variety of polymer materials and constructions, including phthalate-free and DEHP-free medical tubing. Various Grayline medical tubing products are designed to be sterilized using Gamma radiation, ETO (ethylene oxide), or autoclave processes. Radiopaque
- Application: Medical / Pharmaceutical
- Finish: Translucent, Multi-colored
- Material Choices: Plastic Tubing
- Temperature Range: -299 to 500 F
-
Supplier: Grayline, Inc.
Description: Grayline offers chemical resistant tubing in a variety of polymer materials and constructions. Care must be taken when selecting a tubing product because each material offers its own unique set of chemical resistant properties. Our engineers are ready and willing to work with our polymer compounders
- Application: Chemical
- Finish: Translucent, Multi-colored
- Material Choices: Plastic Tubing
- Temperature Range: -299 to 500 F
-
Supplier: Grayline, Inc.
Description: Grayline food & beverage tubing is available in a variety of polymer materials and constructions. These products meet the requirements of various industry standards, including NSF 51, NSF 61, FDA Title 21 and 3-A. Grayline also offers non-phthalate food & beverage tubing. Grayline food & beverage
- Application: Food Processing / Beverage
- Finish: Translucent, Multi-colored
- Material Choices: Plastic Tubing
- Temperature Range: -299 to 500 F
-
Supplier: NewAge Industries
Description: Made from FEP fluoropolymer tubing Corrugations allow a nearly zero bend radius – easily flexed Can be extended or compressed without affecting the tube’s I.D. Made without plasticizers which can leach into critical streams
- Application: Chemical, Medical / Pharmaceutical, Water
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Temperature Range: 200 F
-
Supplier: NewAge Industries
Description: Translucent PTFE tubing offers excellent chemical and electrical properties Available from stock with or without a stainless steel wire encircling the O.D. Wire coil provides increased pressure capability and aids in electrical grounding Easily flexed – spiral construction allows far greater
- Application: Chemical, Medical / Pharmaceutical, Water
- Materials: PTFE, Fluoropolymer (PFA, FEP, etc.)
- Minimum Bend Radius: 2.25 inch
- Shape: Round
-
Supplier: BRIM Electronics, Inc.
Description: BRIML0Nä Fluoropolymer tubings are extruded from high molecular weight Tetrafluoroethylene resin and is unmatched in applications reguiring high temperature and high dielectric strength. BRIMLONä tubings are rated for continuous operating temperatures of -90°C to +250°C. It
- Application: General Purpose
- Design Units: English
- Materials: PTFE, Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 1 inch
-
Supplier: BRIM Electronics, Inc.
Description: BRIML0Nä Fluoropolymer tubings are extruded from high molecular weight Tetrafluoroethylene resin and is unmatched in applications reguiring high temperature and high dielectric strength. BRIMLONä tubings are rated for continuous operating temperatures of -90°C to +250°C. It
- Application: General Purpose
- Design Units: English
- Materials: PTFE, Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 1 inch
-
Supplier: BRIM Electronics, Inc.
Description: BRIML0Nä Fluoropolymer tubings are extruded from high molecular weight Tetrafluoroethylene resin and is unmatched in applications reguiring high temperature and high dielectric strength. BRIMLONä tubings are rated for continuous operating temperatures of -90°C to +250°C. It
- Application: General Purpose
- Design Units: English
- Materials: PTFE, Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 0.5000 inch
-
Supplier: AGC Chemicals Americas, Inc.
Description: Copolymers of tetrafluoroethylene and a perfluorinated vinyl ether, Fluon® PFA Resins can be used over a wide range of temperatures from extremely low to high (-200 °C to 260 °C) without losing excellent chemical, electrical, mechanical and surface properties. PFA resins
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF), Specialty / Other
- Dielectric Constant: 2.07
- Dielectric Strength: 1900 kV/in
- Elongation: 340 %
-
Supplier: Altaflo
Description: ALTAFLUOR 400® PFA Tubing & Pipe PFA (perfluoroalkoxy) is the tubing of choice for applications involving extreme chemical resistance combined with high temperature exposure. ALTAFLUOR 400® tubing and pipe are made exclusively from the highest molecular weight resins
- Application: Chemical, Other
- English Size: 1"
- Material: Fluoropolymers (PFA, FEP, ETFE, etc.)
- Pipe Schedule (if applicable): 40
-
Supplier: Accuris
Description: STANDARD SPECIFICATION FOR PERFLUOROALKOXY (PFA)-FLUOROPOLYMER TUBING - INCLUDES STANDARD + REDLINE (PDF)
-
Supplier: Cole-Parmer
Description: Convoluted spiral design promotes full drainage and increases tubing flexibility. This chemical-resistant fluoropolymer tubing is sold in 5-ft lengths with nonconvoluted 1"L sections at both ends for easy connections.
- Finish: Clear, Translucent
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 0.2520 inch
- Outside Diameter / Size: 0.2795 inch
-
Supplier: Cole-Parmer
Description: Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work.|Characteris tics: Chemically inert, nontoxic, and virtually nonporous.
- Finish: Translucent
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 0.4409 inch
- Outside Diameter / Size: 0.5039 inch
-
Supplier: Cole-Parmer
Description: Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work.|Characteris tics: Chemically inert, nontoxic, and virtually nonporous.
- Finish: Translucent
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 0.6890 inch
- Outside Diameter / Size: 0.7480 inch
-
Supplier: Cole-Parmer
Description: Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work.|Characteris tics: Chemically inert, nontoxic, and virtually nonporous.
- Finish: Translucent
- Materials: Fluoropolymer (PFA, FEP, etc.)
- Maximum Inside Diameter / Size: 0.1575 inch
- Outside Diameter / Size: 0.2520 inch
-
Supplier: Thermal Wire and Cable LLC
Description: agents, UV light, and other environmental agents. In addition, PFA does not use any leachable or degradable stabilizing additives, which offers an important safety advantage when designing products for long service life. Type PFA (perfluoro alkoxy fluoropolymer Teflon
- Cable Insulation: Other
- North American (AWG): 2 AWG
- Number of Conductors: 1 #
- Operating Temperature: 200 C
-
Supplier: Thermal Wire and Cable LLC
Description: agents, UV light, and other environmental agents. In addition, PFA does not use any leachable or degradable stabilizing additives, which offers an important safety advantage when designing products for long service life. Type PFA (perfluoro alkoxy fluoropolymer Teflon
- Cable Insulation: Other
- North American (AWG): 8 AWG
- Number of Conductors: 1 #
- Operating Temperature: 200 C
-
Supplier: Thermal Wire and Cable LLC
Description: agents, UV light, and other environmental agents. In addition, PFA does not use any leachable or degradable stabilizing additives, which offers an important safety advantage when designing products for long service life. Type PFA (perfluoro alkoxy fluoropolymer Teflon
- Cable Insulation: Other
- North American (AWG): 4 AWG
- Number of Conductors: 1 #
- Operating Temperature: 200 C
-
Supplier: Thermal Wire and Cable LLC
Description: agents, UV light, and other environmental agents. In addition, PFA does not use any leachable or degradable stabilizing additives, which offers an important safety advantage when designing products for long service life. Type PFA (perfluoro alkoxy fluoropolymer Teflon
- Cable Insulation: Other
- North American (AWG): 12 AWG
- Number of Conductors: 1 #
- Operating Temperature: 200 C
-
Supplier: Process Technology
Description: Excellent chemical compatibility and rugged design for your heating or cooling application. FEATURES All wetted parts of fluoropolymer (FEP, PFA, or PTFE) construction. Heavy duty CPVC mounting bracket and 1/8-inch thick perforated guard helps
- Applications: Chemical Processing, Electronics / Power Supply Cooling
- Connection Type: Other
- Maximum Working Pressure: 30 to 60 psi
- Primary Exchanger Material: Other
-
Supplier: AGC Chemicals Americas, Inc.
Description: Fluon® Melt Processable Compounds are based on copolymer resins FEP, ETFE, PFA, PVDF, MFA and ECTFE. Extending fluoropolymer properties of chemical resistance, toughness and lubricity, standard products are free of cadmium, hexavalent chromium and lead. There are six Fluon® melt
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Material Type / Grade: Thermoplastic
- Pellets: Yes
-
Supplier: U.S. Plastic Corporation
Description: Made from PFA resin, the fluoropolymer with the lowest metal ion content, these test tubes are excellent for trace metal analysis. They are inert, noncontaminating and transparent for easy viewing of contents. They withstand temperature extremes. Repeatedly sterilizable and virtually
- Volume: 60 cc
-
Supplier: TriStar Plastics Corp.
Description: High-temperature resistance Chemical resistance FDA compliance
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Industry: General Industrial
- Overall Thickness: 0.0020 to 3 inch
- Thermoset / Crosslinked: Yes
-
Supplier: ASTM International
Description: This specification covers tubing produced from PFA fluoropolymer resins which are cited in another specification. This document specifies tubing dimensional tolerances, tensile properties and related electrical properties as noted in the appropriate tables when tested in accordance
-
Supplier: Cri-Tech, Inc.
Description: Cri-plastMP™ PFA Electrically Conductive Compounds are formulated to meet your static dissipative/conducti ve, ATEX requirements in multiple applications. Specific grades can be processed by injection, extrusion, transfer molding, and compression molding. Superior static dissipative
- Chemical / Polymer System Type: Fluoropolymer (PTFE / PVDF)
- Elongation: 280 %
- Features: Anti-static, Electrically Conductive Compound
- Industry: Industrial
-
Supplier: Whitford Corporation
Description: PFA topcoat for fuser roller.
- Cure / Dry Temperature: 788 F
- Features: Chemical / Oil Resistant, Heat Resistant / High Temperature, Wear Resistant (Abrasion / Erosion), Weather / UV Resistant
- Form: Water Based
- Industry: Automotive, OEM / Industrial, Printing / Screen Coating
Find Suppliers by Category Top
Featured Products Top
-
PFA has most of the physical and chemical properties of PTFE, which is commonly used as material for piping and fittings, as well as corrosion-resistant lining of vessels. Chemically inert to most industrial chemicals & solvents (read more)
Browse Fabricated Plastic Parts and Semi-Finished Shapes Datasheets for Shenzhen Dechengwang Technology Co., Ltd -
Fluon® PFA Resins Fluon® PFA Resins are copolymers of tetrafluoroethylene and a perfluorinated vinyl ether. They can be used over a wide range of temperatures from extremely low to high (-200 °C (read more)
Browse Polymers and Plastic Resins Datasheets for AGC Chemicals Americas, Inc. -
Dechengwang is a specialized Fluoropolymer components manufacturer. Since 2006, the material range expaned from Virgin PTFE to Modified PTFE, PTFE compound, PEEK, PFA, PCTFE, PVDF, PI, PPS and PEI material. The use of fluoroplastic has many advantages in manufacturing and (read more)
Browse CNC Machining Services Datasheets for Shenzhen Dechengwang Technology Co., Ltd -
the toughest environmental conditions without the need for additional protection such as surface treatment or coating. The Available material in Chemical Application PEEK PTFE PFA (read more)
Browse Fabricated Plastic Parts and Semi-Finished Shapes Datasheets for Shenzhen Dechengwang Technology Co., Ltd -
Proven Materials in Aerospace PTFE PTFE Compound PCTFE PEEK PFA (read more)
Browse Fabricated Plastic Parts and Semi-Finished Shapes Datasheets for Shenzhen Dechengwang Technology Co., Ltd -
NewAge Industries stocks fluoropolymer tubing in PTFE, FEP, and PFA formulations. Features include: Chemically inert; low permeability Lowest coefficient of friction of any solid material Excellent electrical and weathering properties; non (read more)
Browse Plastic Tubing Datasheets for NewAge Industries -
products. These include PTFE, FEP, PFA, UHP PFA, PVDF, THV, PVDF FLEX and THV FLEX, materials. We are able to ship the same day from our extensive inventory. Altaflo is able to quickly and cost-effectively produce custom items from these and other fluoropolymer or fluoroplastic resins to (read more)
Browse Plastic Tubing Datasheets for Pexco -
Fluoropolymers, including PTFE, FEP, and PFA, are some of the most versatile engineering materials known and have been used in nearly every field of modern industry, technology, and science. Their non-stick properties became commonly recognized by the consuming public when E. I. Du (read more)
Browse Plastic Tubing Datasheets for NewAge Industries -
Pureloc® compression fittings are made from durable PFA fluoropolymer and work best with rigid and semi-rigid tubing made from materials like fluoropolymer, nylon, polyethylene, and polypropylene. Pureloc is a multi-part fitting that works by compressing, or squeezing, the O.D. of the tubing (read more)
Browse Tube Fittings Datasheets for NewAge Industries -
. These materials provide improved performance in critical cable constructions when they replace neat PEEK, thermoset PI and perfluoroalkoxy alkane (PFA). Why are fluoropolymer compounds more versatile than other materials? You can use these new fluoropolymer compounds (read more)
Browse Industrial Coatings Datasheets for AGC Chemicals Americas, Inc.
Conduct Research Top
-
Fluoropolymer Bottle Extractables Profile
This technical note outlines a study performed by a major biopharmaceutical company establishing a comprehensive extractable profile of a fluoropolymer (PFA) bottle. The study used aggressive extraction conditions chosen to bracket the drug product applications. The outcome of this study provided
-
The Secret is in the Lining: The Use of Fluoropolymer Materials For Corrosive Pumping
Chemical process pumps lined with fluoroplastic materials such as PFA, ETFE and PVDF have excellent corrosion resistance capabilities, especially PFA, which can be used in many applications up to 500 F. PFA (Perfluoroalkoxytetrafluoroethylene) is a copolymer of Tetrafluoroethylene
-
KYNAR (R) PVDF (Polyvinylidene Fluoride)
This fluoropolymer material has superior chemical and abrasion resistance, mechanical strength and temperature capabilities in comparison to all other thermoplastic materials. It offers substantially greater strength and wear resistance over other common fluoroplastics (PTFE, PFA, etc
More Information Top
-
Specialty Plastic Films
The FEP and PFA fluoropolymer films are produced from the virgin resins of each of these polymers by the conventional melt extrusion-flat die casting process.
-
Specialty Films
Saint-Gobain Performance Plastics, which sells the product as Norton® PFA fluoropolymer film, is the only other manufacturer of PFA film in the United States.
-
http://dspace.mit.edu/bitstream/handle/1721.1/38749/33431577-MIT.pdf?sequence=2
FEP and PFA fluoropolymers are commonly used as dielectric insulation because of their extremely low dielectric constants.
-
Clearance Items Pipe and Tubing - Plumbing - Grainger Industrial Supply
○ PFA Fluoropolymer Tubing(2) .
-
Leak-Free PFA Fittings Now Stocked In Twelve Styles
Southampton, PA - Immediately available from plastic tubing manufacturer NewAge Industries is a line of PFA fluoropolymer compression fittings in a dozen styles.
-
Equipment | Leak-free PFA fittings are now stocked in twelve styles | Food Processing
Immediately available from plastic tubing manufacturer NewAge Industries is a line of PFA fluoropolymer compression fittings in a dozen styles.
-
New Perfluoroalkoxy Resins For The Chemical Process Industry: A Reliable Solution In Corrosive Environments
MFA belongs to the generic class of PFA fluoropolymers as specified in the ASTM D3307.
-
Plumbing - Grainger Industrial Supply
… Dia 1/8 In, Wall Thickness 0.062 In, Max Working Pressure @ 70 380 Max Working Pressure @ 70 , Burst Pressure 1889 PSI, Temp Range -329 To 500 F, Roll Length 50 Ft, Material of Construction PFA Fluoropolymer , Min Bend Radius 1/2 …
-
Plumbing Pipes and Tubing - Plumbing - Grainger Industrial Supply
○ PFA Fluoropolymer Tubing(18) .
-
PARKER Tubing,7/16 In ID,PFA,Natural,50 Ft - PFA Fluoropolymer Tubing - 2VLV5|104-0500031-NT-50 - Grainger Industrial Supply
• PFA Fluoropolymer Tubing .