-
Supplier: Brady Corporation
Description: ANSI Z535 Safety Sign
-
Supplier: Accuris
Description: SAFETY COLOR CODE - ENVIRONMENTAL FACILITY SAFETY SIGNS - CRITERIA FOR SAFETY SYMBOLS - PRODUCT SAFETY SIGN & LABELS - ACCIDENT PREVENTION TAGS - 1 USER NETWORK
-
Supplier: Accuris
Description: SAFETY COLOR CODE - ENVIRONMENTAL FACILITY SAFETY SIGNS - CRITERIA FOR SAFETY SYMBOLS - PRODUCT SAFETY SIGN & LABELS AND ACCIDENT PREVENTION TAGS *** INCLUDES PARTS 1-6 ***
-
-
Description: not intended to provide a rote specification for complying with the HCS or any other government requirements. Safety data sheet and precautionary labeling requirements and definitions are subject to change. It is the responsibility of the SDS and label preparer to be aware of current
-
Description: Occupational Safety and Health Administration (OSHA) Hazard Communication Standard (HCS; 29 CFR 1910.1200) and the substance specific standards (29 CFR 1910.1001-1052). This Standard is not intended to provide a rote specification for complying with the HCS or any other government
-
Supplier: Brady Corporation
Description: Roll (1) 4" x 6" B-595 ANSI Warning Header Label Roll (1) 4" x 6" B-595 ANSI Caution Header Label Roll (1) 4" x 6" B-595 ANSI Notice Header Label Roll (1) 4" B-526 Photoluminescent Label Roll (1) 4" x 6" B-595 RTK
-
Description: platforms. Purpose: This standard is designed to provide reasonable safety for life and limb of those engaged in occupations requiring the use of scaffolding. A10.8 Table of Contents SECTION 1. General 1.1 Scope 1.2 Purpose 1.3 Exceptions 1.4 Mandatory and Advisory Rules 1.5 Equivalent
-
Supplier: CSA Group
Description: Overview CSA Group, in cooperation with Health Canada, has developed CAN/CSA Z600 – Safety of corded window covering products. CAN/CSA Z600 is referenced in legislation in The Canada Consumer Product Safety Act (CCPSA).1 The new 2014 edition aligns requirements with the 2012 edition of
-
Supplier: LEM Products, Inc.
Description: RECTANGULAR TYPE 30 MIL LEXAN. MATERIAL 14 INCH 10 INCH DANGER, WATCH OVERHEAD LINES LEGEND LEMTEX[T] BRAND APPLICABLE STANDARD ANSI Z535.2 MAXIMUM WITHSTAND TEMPERATURE -40 TO 255 DEG F MOUNTING HOLE SIZE 1/4 INCH GROMMET LSX MODEL
- Width: 10 inches
- Height: 1.1666666666666667 ft
- Features: Specialty / Other
-
Supplier: DigiKey
Description: CART TAPE GMK 4X6.25 ANSI CAUTIO
- Features: Adhesive Backed
-
Supplier: R. S. Hughes Company, Inc.
Description: R.S. Hughes Company carries a wide array of signs from fire safety to motivational signs. Brady assigns a material code for each of the materials used in their item construction. This Brady safety awareness sign is constructed using polyester which is the B-302 Brady Material Code.
- Features: Specialty / Other
-
Supplier: Cole-Parmer
Description: are specified by OSHA and ANSI to designate the severity of the hazard. Each color has a specific role. Signs are available in Adhesive Vinyl (VS), Plastic (VP), and Aluminum (VA) to best suit your application. VS is a flexible 4-mil pressure sensitive vinyl with adhesive back and
- Safety / Warning Type: Flammable / Explosion Hazard
- Materials of Construction: Plastic / Film
-
Supplier: Cole-Parmer
Description: are specified by OSHA and ANSI to designate the severity of the hazard. Each color has a specific role. Signs are available in Adhesive Vinyl (VS), Plastic (VP), and Aluminum (VA) to best suit your application. VS is a flexible 4-mil pressure sensitive vinyl with adhesive back and
- Safety / Warning Type: Flammable / Explosion Hazard
- Materials of Construction: Plastic / Film
-
Supplier: R. S. Hughes Company, Inc.
Description: R.S. Hughes Company carries a wide variety of signs from fire safety to humorous signs. Brady assigns a material code for each of the materials used in their product construction. This Brady electrical safety sign is manufactured using aluminum which is the B-555 Brady Material Code.
- Safety / Warning Type: Electrical / High Voltage
- Materials of Construction: Metal
- Features: Specialty / Other
-
Supplier: R. S. Hughes Company, Inc.
Description: R.S. Hughes Company carries a large selection of signs from emergency safety signs to no smoking signs. Brady assigns a material code for each of the materials used in their part construction. This Brady electrical safety sign is constructed using aluminum which is the B-555 Brady
- Safety / Warning Type: Electrical / High Voltage
- Materials of Construction: Metal
- Features: Specialty / Other
-
Supplier: Miller Fall Protection / Honeywell
Description: 400 lbs. (181.4 kg) capacity Meets applicable OSHA, ANSI and CSA Standards
- Type: Body Harnesses
-
Supplier: R. S. Hughes Company, Inc.
Description: FIRST SAFETY SHOWER AND EYEWASH STATION. Some signs support inside use only, while others can be installed indoors or out. This sign has the flexiblity to be used both indoor or outside. There are a variety of standards that signs may comform to. In particular, this part meets the ANSI
- Features: Specialty / Other
-
Supplier: Cole-Parmer
Description: specified by OSHA and ANSI to designate the severity of the hazard. Each color has a specific role. SAFETY FIRST |Indicates general instructions relative to safe work practices, remind of proper safety procedures, and indicate the location of safety equipment. Signs are
- Safety / Warning Type: Emergency Exit / Egress
- Materials of Construction: Plastic / Film
-
Supplier: Cole-Parmer
Description: are specified by OSHA and ANSI to designate the severity of the hazard. Each color has a specific role. Signs are available in Adhesive Vinyl (VS), Plastic (VP), and Aluminum (VA) to best suit your application. VS is a flexible 4-mil pressure sensitive vinyl with adhesive back and
- Materials of Construction: Plastic / Film
-
Supplier: ASTM International
Description: instructions provided with each bunk bed. 1.3 For the purpose of this consumer safety specification, a bunk bed (hereinafter referred to as a bed) is defined as any bed in which the underside of the foundation is over 30 in. (762 mm) from the floor. 1.4 This consumer safety
-
Supplier: Rutke Signs & Safety
Description: A large part of National Marker's product line can be used in many applications. Our General Safety Identification products have many uses across many types of facilities and industries. Look here for products that identify hazards that occur in many types of industries. ANSI Signs
- Width: 7 inches
- Height: 0.8333333333333334 ft
- Materials of Construction: Plastic / Film
-
Supplier: CSA Group
Description: proper use of current fall protection equipment - updated regularly in response to technological change and evolving safety concerns. It also tests and certifies fall protection equipment components to the applicable Z259 standards in Canada and the corresponding ANSI/ASME standards in
-
Supplier: CableOrganizer.com, Inc.
Description: What's special about these pipe labels? Identifies the contents, directional flow, and hazardous status of pipes for overall safety Made of B-946 Vinyl material that can be used indoors or outdoors for application versatility Coated adhesive backing for ease of installation and
-
Supplier: Wiper Master, Inc.
Description: non-binding edge prevents neck chafing. Includes positionable lanyard clip and 3-position back D-ring for optimal connection position, covered label pack and RFID chip for easy product tracking and inspection. 10105960 includes Suspension Trauma Safety Step. OSHA, ANSI
- Type: Body Harnesses
-
Supplier: Wiper Master, Inc.
Description: non-binding edge prevents neck chafing. Includes positionable lanyard clip and 3-position back D-ring for optimal connection position, covered label pack and RFID chip for easy product tracking and inspection. 10105960 includes Suspension Trauma Safety Step. OSHA, ANSI
- Type: Body Harnesses
-
Supplier: Wiper Master, Inc.
Description: non-binding edge prevents neck chafing. Includes positionable lanyard clip and 3-position back D-ring for optimal connection position, covered label pack and RFID chip for easy product tracking and inspection. 10105960 includes Suspension Trauma Safety Step. OSHA, ANSI
- Type: Body Harnesses
-
Supplier: Wiper Master, Inc.
Description: non-binding edge prevents neck chafing. Includes positionable lanyard clip and 3-position back D-ring for optimal connection position, covered label pack and RFID chip for easy product tracking and inspection. 10105960 includes Suspension Trauma Safety Step. OSHA, ANSI
- Type: Body Harnesses
-
Supplier: Nortech Laboratories, Inc.
Description: agent, CarbamaKool™. Exceeds American National Standard - Minimum Requirements for Workplace First Aid Kits (ANSI Z308.1-1998). No Shipping Restrictions, Haz-Mat Charges or Labeling Requirements - Safe Shipping by Air, Land or Sea. Latex Free, Haz-Mat Free. Available for Private Label.
-
Supplier: Rehrig Pacific Company
Description: load-bearing points. As a result, injection molding allows Rehrig to engineer premium product quality, performance and dependability into every product we make. Rehrig Roll-out Carts meet ANSI Safety Standard Z245.30 and ANSI Compatibility Standard Z245.60 Capacity: 35 gallons
-
Supplier: Rehrig Pacific Company
Description: and load-bearing points. As a result, injection molding allows Rehrig to engineer premium product quality, performance and dependability into every product we make. Rehrig Roll-out Carts meet ANSI Safety Standard Z245.30 and ANSI Compatibility Standard Z245.60 Capacity: 35
-
Supplier: Rehrig Pacific Company
Description: load-bearing points. As a result, injection molding allows Rehrig to engineer premium product quality, performance and dependability into every product we make. Rehrig Roll-out Carts meet ANSI Safety Standard Z245.30 and ANSI Compatibility Standard Z245.60 Capacity: 95 gallons
-
Supplier: ASCO Power Technologies
Description: Listed 100kA per phase rating Type 1 SPD – All UL required OCP & Safety Coordination included inside & can be installed line-side or load-side of main disconnect 20kA Inominal (In) (most models) 200kA SCCRs (most models) UL 96A Lightning Protection Master Label compliant Large Block
- Maximum Surge Current: 100,000 amps
- Operating Temperature: -13 to 140 F
- Wires: 4-Wire
- Standards: ANSI, CE Marking, IEC, IEEE, RoHS Compliant, UL, UL 1449 Third Edition
-
Supplier: MSA Safety
Description: on the market, allowing for increased user safety at lower heights. Fall limiter design stops a fall quickly, providing workers with the ability to tie off at lower levels below the D-ring. Housing design is compact and lightweight; users can replace their standard 6-ft. (1.8 m)
- Type: Braking / Descent Mechanisms
-
Supplier: MSA Safety
Description: enclosure 4-20 mA, HART output Heater for freeze protection Buzzer Red strobe Approvals Approvals subject to change without notice and may differ based on configuration, part number and/or country. Contact Customer Service or check approval label on product for specific approval
- Operating Temperature: -4 to 104 F
- Measurement Type: %LEL
- Application: Ambient Air Monitoring
- Electrical Outputs: Analog Current
-
Supplier: UL Standards & Engagement
Description: 2002-09Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test. IEC 61000-4-4: 1995-01Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section
Find Suppliers by Category Top
Featured Products Top
-
Whether tasked with reducing the liability of human error or maintaining safety when testing systems in the field, E-Z-Hook has off-the-shelf components and can customize solutions per your requirements. (read more)
Browse Electrical Test Probes Datasheets for E-Z-HOOK, a division of Tektest, Inc. -
Brady's i4311 is the first portable 4" wide industrial label printer, bringing benchtop-quality printing to a cordless, hybrid design. Weighing just 13 lbs and delivering up to 5,000 labels per charge, it prints full-size, high (read more)
Browse Label Printers Datasheets for Heilind Electronics, Inc. -
terminal or cage clamp versions have 4 conduit openings, to allow for mounting flexibility. The RSS16 sensors meet stringent North American and European Standards, are cULus and CE approved, and can be used in the highest level of machine safety circuits, PLe to ISO13849-1 and SIL 3 to IEC61508. (read more)
Browse Safety Sensor Switches Datasheets for Schmersal Inc. -
diverting type and is available across a wide size range. Highlight Specifications Body type: three-way cast globe valve Nominal size: 3/4" to 14" Pressure rating: ANSI Class 125/150/300/600; JIS 10K/16K/20K/30K/40K; PN1.6/4.0/6.4/10.0 MPa (read more)
Browse Industrial Valves Datasheets for Shanghai Thinktank Process Management Co., Ltd -
its memory type (LPDDR4 SDRAM), density (16 Gb), and organization (x32 interface) to judge functional fit, performance headroom, and system-level margins early in the design cycle. This parameter-led approach reduces the risk of selecting by family name alone and gives architecture, schematic, and (read more)
Browse SRAM Memory Chips Datasheets for ERSAELECTRONICS PTE. LTD. -
SDINBDG4-8G-XI1 FLASH Memory Chips are designed for professional applications including industrial embedded systems, data logging, HMI terminals, and rugged computing, bringing the essential capabilities of a (read more)
Browse FLASH Memory Chips Datasheets for ERSAELECTRONICS PTE. LTD. -
H5ANAG6NCJR-XNC is designed for professional applications including servers, embedded computing, networking equipment, and high-capacity DDR4 subsystems, bringing the essential capabilities of a high-density memory device into one clearly defined orderable device. Engineers can use its memory (read more)
Browse SRAM Memory Chips Datasheets for ERSAELECTRONICS PTE. LTD. -
memory type (DDR4 SDRAM), density (8 Gb), and organization (512M × 16) to judge functional fit, performance headroom, and system-level margins early in the design cycle. This parameter-led approach reduces the risk of selecting by family name alone and gives architecture, schematic, and (read more)
Browse Memory Chips Datasheets for ERSAELECTRONICS PTE. LTD. -
, has designed an innovative solution supplying consistently tepid water on demand to meet OSHA and ANSI Z358.1 safety requirements: the (read more)
Browse Tempering Valves and Thermally Actuated Valves Datasheets for ThermOmegaTech® -
worker wearing it. MSA SRLs are in conformity with the requirements of ANSI Z359.14. Make selection and use of self-retracting lifelines simple. V-SHOCK products are available in multiple lengths and snaphook configurations, so they can be used for a variety of applications. (read more)
Browse Fall Arrest Systems Datasheets for MSA Safety
More Information Top
Indicates content that may require registration and/or purchase.
-
Lawsuit!: Reducing the Risk of Product Liability for Manufacturers
The difference in safety alert symbols was the only element that separated an ISO 3864-2 symbol panel þ text panel þ severity level panel format from an ANSI Z535.4 safety label that contained a symbol, text message, and signal word…
-
New Developments in U.S. and International Safety Sign Technology
The design elements of a typical ANSI Z535.4 product safety label .
-
Design Principles and Patterns for Computer Systems That Are
Simultaneously Secure and Usable
Product safety labels : ANSI Z535.4 -2002 .
-
Emotions and Risky Technologies
Human factors in the revised ANSI Z535.4 standard for safety labels .
-
Federal Register > Thursday, August 10, 2006 > [71 FR 45904] Standards for All Terrain Vehicles and Ban of Three-Wheeled All Terrain Vehicles; Notice of Propos...
The proposed standard allows manufacturers to display additional warning labels on ATVs so long as they are consistent with ANSI Z535.4-2002, American National Standard for Product Safety Signs and Labels ANSI Z535.4 (2002) and are affixed to the ATV…
-
Label System Essentials for OEM Compliance (.pdf)
The roots of CFR Part 1407 stem from the American National Standards Institute ( ANSI ) Z535.4 Product Label Safety Standard, the recognized industry standard in the United States for product safety labeling.
-
A New and Powerful Risk Reduction Technique: Creating OSHA/ANSI Safety Sign Systems as an Outcome of Risk Assessment
…this: OSHA’s continued reference of only the old safety sign and tag standards made OSHA (and our workplaces) the outlier in our country where we’ve seen a dramatic and nearly complete adoption of the ANSI Z535.4 standard for product safety labels .