-
Supplier: Hilliard Corporation (The)
Description: Friction Torque Limiters and Couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment.
- Bore Diameter: 0.7500 to 1 inch
- Bore Keyway: Yes
- Clutch Engagement: Plate / Disc
- Diameter: 4.75 inch
-
Supplier: Mach III Clutch, Inc.
Description: Operation Mechanically adjustable, continuously engaged friction torque limiter slips in the event of an overload Torque at which limiter will slip is field adjustable through the tightening or loosening of a nut Adjustment nut is locked in place by set
- Bore Diameter: 1.44 to 2 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 7.34 inch
- Drive / Load Connection: In-line Shafts
-
Supplier: Mach III Clutch, Inc.
Description: Operation Mechanically adjustable, continuously engaged friction torque limiter slips in the event of an overload Torque at which limiter will slip is field adjustable through the tightening or loosening of a nut Adjustment nut is locked in place by set
- Bore Diameter: 1.44 to 2 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 7.34 inch
- Drive / Load Connection: In-line Shafts
-
-
Supplier: Mach III Clutch, Inc.
Description: Operation Mechanically adjustable, continuously engaged friction torque limiter slips in the event of an overload Torque at which limiter will slip is field adjustable through the tightening or loosening of a nut Adjustment nut is locked in place by set
- Bore Diameter: 1 to 1.38 inch
- Bore Keyway: Yes
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 5.69 inch
-
Supplier: Mach III Clutch, Inc.
Description: Operation Mechanically adjustable, continuously engaged friction torque limiter slips in the event of an overload Torque at which limiter will slip is field adjustable through the tightening or loosening of a nut Adjustment nut is locked in place by set
- Bore Diameter: 1.44 to 2 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 7.34 inch
- Drive / Load Connection: In-line Shafts
-
Supplier: KTR Corporation
Description: special design it is easy to integrate the coupling in the drive. Product features Backlash-free overload system with integrated pulley Pre-finished available with set-in slipping moment Available both as ratchet and synchronous design Torque setting possible while in place Component and cost
- Bore Diameter: 0.7874 to 1.97 inch
- Bore Keyway: Yes
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 2.42 to 4.76 inch
-
Supplier: KTR Corporation
Description: SYNTEX® is a safety system operating with positive locking suitable for torques up to 525 Nm. The component transmitting the torque is a punched disk spring (protected by patent). The design of the coupling ensures short reaction times with high repeating accuracy. Due to the
- Bore Diameter: 0.7874 to 1.97 inch
- Bore Keyway: Yes
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 2.42 to 4.76 inch
-
Torque Limiters and Slip Clutches - Backlash-free Overload System Torque Limiter -- SYNTEX® StandardSupplier: KTR Corporation
Description: SYNTEX® is a safety system operating with positive locking suitable for torques up to 525 Nm. The component transmitting the torque is a punched disk spring (protected by patent). The design of the coupling ensures short reaction times with high repeating accuracy. Due to the
- Bore Diameter: 0.7874 to 1.97 inch
- Bore Keyway: Yes
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 3.15 to 6.38 inch
-
Supplier: KTR Corporation
Description: SYNTEX® is a safety system operating with positive locking suitable for torques up to 525 Nm. The component transmitting the torque is a punched disk spring (protected by patent). The design of the coupling ensures short reaction times with high repeating accuracy. Due to the
- Bore Diameter: 0.7874 to 2.44 inch
- Bore Keyway: Yes
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 3.15 to 6.38 inch
-
Supplier: Huco Dynatork
Description: Materials & Finishes Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sinte red bronze.Fasteners:All oy Steel, black oiled.
- Bore Diameter: 0.6299 to 0.7874 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 1.89 inch
- Drive / Load Connection: In-line Shafts
-
Supplier: Huco Dynatork
Description: Materials & Finishes Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sinte red bronze.Fasteners:All oy Steel, black oiled.
- Bore Diameter: 0.2362 to 0.4724 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 1.02 inch
- Drive / Load Connection: In-line Shafts
-
Supplier: Huco Dynatork
Description: Materials & Finishes Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sinte red bronze.Fasteners:All oy Steel, black oiled.
- Bore Diameter: 0.2362 to 0.4724 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 1.02 inch
- Drive / Load Connection: In-line Shafts
-
Supplier: Huco Dynatork
Description: Materials & Finishes Housing, adjuster ring, adaptors:Al. Alloy 2011T8 or T3. Alocrom finish.Hub:Steel, heat treated.Clutch plates:Size 25 Steel, heat treated. Size 48 Brass.Bearings:Sinte red bronze.Fasteners:All oy Steel, black oiled.
- Bore Diameter: 0.2362 to 0.4724 inch
- Clutch Engagement: Friction, Plate / Disc
- Diameter: 1.02 inch
- Drive / Load Connection: In-line Shafts
-
Supplier: ATLANTA Drive Systems, Inc.
Description: problem after appropriate fnishing (face grinding etc.). Function The driving element (sprocket wheel etc.) is slid onto the bush and clamped between the friction linings by means of the thrust disc, the disc springs and the adjusting nut provided with a safety washer
- Bore Diameter: 0.5512 inch
- Clutch Engagement: Plate / Disc
- Diameter: 3.46 inch
- Drive / Load Connection: Through Shaft
-
Supplier: ATLANTA Drive Systems, Inc.
Description: problem after appropriate fnishing (face grinding etc.). Function The driving element (sprocket wheel etc.) is slid onto the bush and clamped between the friction linings by means of the thrust disc, the disc springs and the adjusting nut provided with a safety washer
- Bore Diameter: 1.89 inch
- Clutch Engagement: Plate / Disc
- Diameter: 9.45 inch
- Drive / Load Connection: Through Shaft
-
Supplier: Eaton Hydraulics Group
Description: -cycle punch presses. They deliver high torque and low inertia in a compact design. Features Ductile iron cylinders promote long cycle life under tough industrial conditions Low-inertia components decrease energy loss, optimize cycle times and limit friction material
- Brake Engagement: Friction
- Brake Operation: Spring Actuation / Engage
- Brake Type: Disc
- Clutch Engagement: Friction
-
Supplier: DieQua Corporation
Description: for adjustable braking torque N– Version with fixed braking torque 5- 1000Nm torque 10 sizes IP 54 Features: manual hand release micro switch or inductive sensor to monitor brake function or wear limit
-
Description: Friction torque: = 3 Ncm (without shaft sealing) RPM ( continuous operation): Singleturn: max.12,000 RPM; Multiturn: max.6,000 RPM Shock (EN 60068-2-27): = 100 g (half sine,6 ms) Permanent shock ( EN 60068-2-29): = 10 g (half sine,16 ms) Vibration (EN 60068
- Encoder Technology: Magnetic
- Rotor Inertia: 4.25E-4 oz-in-sec²
Find Suppliers by Category Top
Featured Products Top
-
Hangzhou Chinabase Machinery manufactures a huge selection of torque limiters. Specializing in: friction torque limiters, pilot ball torque limiters, pilot bronze torque limiters, torque limiters couplings, torque limiters adapters. We have the capability to (read more)
Browse Torque Limiters and Slip Clutches Datasheets for Hangzhou Chinabase Machinery Co., Ltd. -
Compression Limiters are used to preserve a threaded joint’s integrity. As the bolt is tightened to achieve the required friction between threads, the plastic is compressed. Without a Compression Limiter, plastic will either crack or creep, resulting in the loosening and eventual (read more)
Browse Compression Limiters Datasheets for SPIROL -
-4 times longer than untreated steel. Low Friction Coefficient: Brass-on-brass or brass-on-steel friction ranges from 0.2 to 0.35, reducing heat and wear. (read more)
Browse Spur Gears Datasheets for Chengdu Leno Machinery Co., Ltd. -
Standard Features: Hydraulic Double Acting, Fixed Mount, and Uses Fixed or Floating disc Machined Aluminum Construction Hardcoated Housings Replaceable, Non-Asbestos Friction Pads 1500 PSI (read more)
Browse Hydraulic Brakes Datasheets for Branham, W.C. Inc. -
precise torque pre-setting. Smooth torque control: Friction discs, mounted on an inner hub, use similar static and dynamic coefficients of friction (read more)
Browse Datasheets for Hilliard Corporation (The) -
torque, heavy-duty hoist motor for smooth hoisting action Block operated upper limit stop to limit upward hook travel Convenient one-handed pushbutton control for easy operation of all motions 115 volts at push button for operator safety Push-button cable (read more)
Browse Hoists Datasheets for Columbus McKinnon Corporation -
True zero backlash in both axial and rotational directions. » Conventional brakes eliminated backlash only axially (hub fixed to friction disc (read more)
Browse Electric Brakes Datasheets for jbj Techniques Limited -
epoxy-coated ductile iron with an EDPM rubber liner and discs made of ASTM A351-CF8M stainless steel. They are rated to 250 PSI. Valbia pneumatic actuators feature integral side limit stops that do not penetrate the cylinder bore. Spring return models feature nested (read more)
Browse Butterfly Valves Datasheets for Bonomi North America, Inc. -
, conveyor systems, pumps, fans, compressors, mixers, packaging machinery, printing equipment, agricultural machinery, mining equipment, construction machinery, material handling systems, and industrial automation equipment. They are ideal for mounting gears, sprockets, pulleys, couplings, brake discs, and other rotating components requiring high torque transmission and precise positioning. (read more)
Browse Shaft-Hub Locking Devices Datasheets for Hangzhou Chinabase Machinery Co., Ltd. -
include low voltage 12V and multi-voltage 24V AC/DC 100-240 VAC models. Position indicator and torque limiter are standard. For more information on Bonomi high-performance butterfly valve packages, contact Bonomi North America at (704) 412-9031 or visit (read more)
Browse Butterfly Valves Datasheets for Bonomi North America, Inc.
More Information Top
-
Series Clutch Actuators for safe physical human-robot interaction
The design and fabrication of a torque limiter using a large number of friction discs is presented.
-
Friction Materials
• Friction plates or discs are used in clutches, torque limiters , disc drivesand power transmission devices.
-
Konecranes' New XN Electric Chain Hoist Is Cost-Effective And Reliable
Maximum reliability and safety features on the XN hoists include high quality disc brakes, optional upper and lower limit switches, and a friction type torque limiter that is integrated with the brake; ensuring the load is always stopped when the control button …
-
Suppliers to the new VW Golf
… motion TCU Continental Automotive Systems Air cleaner Mann+Hummel Air cleaners Mahle Air control valve (ACV) Continental Automotive Systems All wheel drive Haldex Anti friction bearings FAG Anti friction bearings INA Balance shaft … … Hutchinson Clutch ZF Clutch discs LuK Clutch facings Valeo … … rail 1,6l diesel engine] Gates Multiple v-ribbed belts ContiTech OAP INA Oil caps Magna Steyr Oil control valve (OVC) [1.4 FSI engine] Denso Oil filter modules Sogefi Filter Division O-rings Freudenberg Peak torque limiter LuK Permaglide Kolbenschmidt Pierburg …
-
Operation atlas for orthopädisch-unfallchirurgische further education
Screw-/ plate distance Already by the infusion of screws, in particular by titan screws and the use of the motorized Schraubendrehers without torque limiter , it can come for damage to the Schraubendreher reception in the screw head. As, the friction is supreme at present of the loosening of a screw must be paid attention …
-
Konecranes Introduces The wXN Electric Chain Hoist For Wind Turbine Applications
Operational efficiency is achieved through the friction torque limiter which prevents overloading, accidental over-hoisting, and over-lowering. Additionally, upper and lower electric limit switches and electromagnetic disc brakes facilitate effective load handling and simple …
-
Brake Design and Safety, Third Edition
pedal force and pedal travel for, 18 torque in, 194 PC-BRAKE AIR for 2-S1 tractor-trailer … … PC-BRAKE TEMPERATURE, for continuous braking, 86 Peak and sliding friction in braking forces diagram … … brake pad, 52–53 Pressure limiter valves, 142–143, 241–242 for … … of, 396 Select-high control, 345 Select-low control, 345 Self-energizing brakes disc , 60–61 drum, 32–34 …
-
Power transmission in vehicle gears
… Differenzdruckventil, 146, 616 double universal joint, 446 double clutch gears, 6, 30, 46, 146, 214, 267, 275, 300, 498 double rear circuit, 390, 601 Drehmomenten limiters 464, 145 torque distribution, torque converters, 54 … … synchronization 115, 216 printed sheet housing, lever, 360, 393 … … 471 Grübchenbildung, 180, 211, 260, 303, 641, 664 Grübchentragfähigkeit, 178, 184 boundary layer friction , 238 group method …
-
Hydrodynamics of galaxy mergers with supermassive black holes: is there
a last parsec problem ?
Furthermore, dynamical friction , which is the central phys- ical process involved, is numerically challenging to capture since it involves both the effect of the local overdensity trail- ing the black holes and that of the larger scale torques and tidal distortions generated … … numer- ical viscosity (we used the HLLC Riemann solver and the MinMod slope limiter ) make it ideal … … consists in a NFW isotropic dark matter halo, a ro- tating exponential stellar disc , a Hernquist bulge …
-
Machine elements task and solutions
… equation 34, 10 chain-links, 172 console, - with modified load, 37 coordinate, 35-system, 31 corrosion, of 85 costs Herstell-, 96 Current -, 96 force, angiffspunkt, 37 axial, 95- limiter , 41 operation, 41, 50 … … compensation, 117 129, 126- torque , Elastische-, 121 Fliehkraft-, 147 … Fit game, 64 transition, 64 patent 57, 48 staff, 73 plate , productivity, 201 profile covering, 165 profile … … 185 edge fiber upper -, 39 Lower -, 39 reduction, 173 friction clutch 1, 134 friction , thread, 78 Gleit …
Indicates content that may require registration and/or purchase.