-
Supplier: Newark, An Avnet Company
Description: INTERFACE BOARD, HDMI TO LVDS CONVERTER; Silicon Manufacturer:-; Core Architecture:-; Core Sub-Architecture:-; Silicon Core Number:-; Silicon Family Name:-; For Use With:Midas TFT Displays & Raspberry Pi Single Board Computer RoHS Compliant: Yes
-
Supplier: Texas Instruments
Description: CAMERA PARALLEL RGB TO MIPI CSI-1 SERIAL CONVERTER 24-VQFN -40 to 85
- TJ: -40 to 85 C
- Technology: LVDS
- Features: Other
-
Supplier: Newark, An Avnet Company
Description: CABLE, USB/LVDS TO USB/LVDS, 1.9M; Conversion Type:-; Baud Rate:-; Converter Connector Type:-; Chip Type:-; Cable Length - Metric:1.9m; Cable Length - Imperial:6.2ft; Product Range:100216 Series RoHS Compliant: Yes
-
-
Supplier: Texas Instruments
Description: 16-Bit, 130 MSPS A/D Converter with LVDS Outputs 64-WQFN -40 to 85
- Resolution: 16 bits
- DNL: 0.45 LSB
- INL: 1.5 LSB
- Power Dissipation: 755 milliwatts
-
Supplier: Texas Instruments
Description: Dual 11-Bit, 105 MSPS A/D Converter with Serial LVDS Outputs 60-WQFN
- Features: Other
-
Supplier: Texas Instruments
Description: Dual 14-Bit, 80 MSPS A/D Converter with Serial LVDS Outputs 60-WQFN -40 to 85
- Resolution: 14 bits
- DNL: 0.5 LSB
- INL: 1.5 LSB
- Power Dissipation: 800 milliwatts
-
Supplier: DigiKey
Description: 18/24BIT LVDS TO TTL CONVERTER M
- Features: GPIB Controller / Interface Board
-
Supplier: Utmel Electronic Limited
Description: IC DAC 14BIT LVDS 64VQFN
- Pin Count: 64
- Resolution: 1.75 bits
- Power Dissipation: 530 milliwatts
- Settling Time: 0.011 µs
-
Supplier: VAST STOCK CO., LIMITED
Description: Serializers & Deserializers - Serdes CAMERA PARALLEL SERIAL CONVERTER
- Data Rate: 201,000 kbps
- TJ: -40 to 85 C
- Features: Other, RoHS Compliant
-
Supplier: Utmel Electronic Limited
Description: ADC Dual Pipelined 25Msps 12-bit LVDS/Serial 48-Pin VQFN T/R
- Pin Count: 48
- Power Dissipation: 120 milliwatts
- Sample Rate: 25,000 kSamples/Sec
- Input Voltage Range (Vpp): 2 volts
-
Supplier: Utmel Electronic Limited
Description: ADC Dual Pipelined 250Msps 14-Bit LVDS/Parallel/Serial 64-Pin VQFN
- Pin Count: 64
- Resolution: 1.75 bits
- DNL: 0.0183 LSB
- Power Dissipation: 1,480 milliwatts
-
Supplier: Renesas Electronics Corporation
Description: for extensive configurability, as well as fine control of matching characteristics (gain, offset, skew) between the two converter cores. These adjustments allow the user to minimize spurs associated with the interleaving process. Digital output data is presented in selectable LVDS or
- Resolution: 10 bits
- DNL: 0.5 LSB
- INL: 0.75 LSB
- Power Dissipation: 414 milliwatts
-
Supplier: Renesas Electronics Corporation
Description: The KAD5610P is a family of low-power, high performance, dual-channel 10-bit, analog-to-digital converters. Designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process, the family supports sampling rates of up to 250MSPS. The KAD5610P-25 is the fastest member of
- Resolution: 10 bits
- DNL: 0.5 LSB
- INL: 0.75 LSB
- Power Dissipation: 357 milliwatts
-
Supplier: Renesas Electronics Corporation
Description: The KAD5612P is a family of low-power, high-performance, dual-channel 12-bit, analog-to-digital converters. Designed with FemtoCharge™ technology on a standard CMOS process, the family supports sampling rates of up to 250MSPS. The KAD5612P-25 is the fastest member of this pin-compatible
- Resolution: 12 bits
- DNL: 0.8 LSB
- INL: 2 LSB
- Power Dissipation: 372 milliwatts
-
Supplier: Renesas Electronics Corporation
Description: The KAD5610P is a family of low-power, high performance, dual-channel 10-bit, analog-to-digital converters. Designed with Intersil’s proprietary FemtoCharge™ technology on a standard CMOS process, the family supports sampling rates of up to 250MSPS. The KAD5610P-25 is the fastest member of
- Resolution: 10 bits
- DNL: 0.5 LSB
- INL: 0.75 LSB
- Power Dissipation: 327 milliwatts
-
Supplier: Accuris
Description: MICROCIRCUIT, FLIP CHIP, 3.2 GHz SiGe BiCMOS 130nm, LOW POWER DUAL CHANNEL 12BIT 1.60 Gsps ANALOG TO DIGITAL CONVERTER (ADC) WITH LVDS DEMUX 1:1 OR DEMUX 1:2, MONOLITHIC SILICON
-
Supplier: ODG (Origin Data Global)
Description: 14 Positions 1.8V 250MHz LVDS QFN-40(6x6) Analog to Digital Converters (ADC) ROHS
-
Supplier: Teledyne e2v Semiconductors
Description: Digital-to-Analog Converters Teledyne e2v has been innovating data converter technologies for over 20 years and offers some of the most powerful Giga Samples per second (GSps) digital to analog converters on the market that feature: Signal generation of up to 25 GHz Embedded
- Resolution: 10 bits
- Features: Other
-
Supplier: Teledyne e2v Semiconductors
Description: Product Status: Discontinued The EV10CS140VTPY is a high speed demultiplexer providing easy interface of e2v high speed A/D converters (ADC) into Field Programmable Gate Arrays (FPGA) rated at 1/2 the speed or less of e2v’s ADCs. ThisEV10CS140VTP_AT32136 demultiplexer reduces a 10-bit data
- Resolution: 10 bits
- Sample Rate: 3,000,000 kSamples/Sec
- Features: Other
-
Supplier: Lingto Electronic Limited
Description: LVDS-CMOS-LVDS CONVERTER & SPLIT
- Translation: Both
- Logic Family: Emitter Coupled Logic (ECL), LVDS, Standard CMOS
- Features: Other
-
Supplier: Richardson RFPD
Description: The AD9229 is a 50 or 65 MSPS quad 12-bit, analog°to°digital converter with serial LVDS outputs. An on°chip track°and°hold circuit is designed for low cost, low power, small size and ease of use. The product operates up to a 65 MSPS conversion rate and is optimized for outstanding
-
Supplier: Richardson RFPD
Description: supports LVDS for outstanding SFDRor CMOS input data for less demanding applications. Interface is configurable from 4-bit nibbles to 32-bit wordsand can run at up to 150 MHz CMOS or 150 MHz LVDS DDR. Manufactured on a CMOS process, the AD9789 uses a proprietary switching technique
- Package Type: QFP
-
Supplier: Lingto Electronic Limited
Description: OCTAL, 12-BIT ADC WITH LVDS OUT
-
Supplier: Radwell International
Description: IC, LVDS TRANSMITTER, TSSOP-56, 3.3V, LINE RECEIVER, 4 FUNC, 4 RCVR. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: 8-Ch 12-Bit 80MSPS ADC, LVDS, HTQFP Product overview: ADS5292IPFP from Texas Instruments is an Analog-to-Digital Converter IC for sensor measurement, data acquisition, industrial monitoring, instrumentation, and embedded control systems. It is useful for engineers and buyers comparing
- Resolution: 12 bits
- Operating Temperature: -40 C
- Features: Other
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: 14-Bit 400MSPS DAC, Parallel/LVDS Interface, HTQFP Product overview: DAC5675IPHP from Texas Instruments is a Digital-to-Analog Converter IC for analog output generation, control loops, instrumentation, signal synthesis, and embedded system interfaces. It is useful for engineers and
- Resolution: 14 bits
- Power Dissipation: 900 milliwatts
- Operating Temperature: -40 C
- Features: Other
-
Supplier: Win Source Electronics
Description: Manufacturer: AMIS Category: Integrated Circuits (ICs)>Interface>Encoders, Decoders, Converters Part Status: Obsolete Type: Header, Male Pins, Shrouded (4 Side) Input: BLVDS, CML, LVDS, LVPECL Output: Ethernet Frequency - Max: 650 MHz Voltage - Supply: 3V Operating Temperature: -40°C ~
- Supply Voltage: 3 volts
- Output Frequency: 650 MHz
- Device Type: Clock Generator
- Features: Other
-
Supplier: Win Source Electronics
Description: 14 Sampling Rate (Per Second): 125M Data Interface: LVDS - Parallel, Parallel Number of A/D Converters: 2 Reference Type: External, Internal Voltage - Supply, Analog: 2.85V ~ 3.4V Voltage - Supply, Digital: 1.65V ~ 3.6V Package / Case: 64-VFQFN Exposed Pad Supplier Device Package:
- Sample Rate: 125,000 kSamples/Sec
- Operating Temperature: -40 to 85 C
- Features: Other
- Interface Type: Parallel
-
Supplier: LHV Power
Description: Description: The GMA Series is a unique range of low cost, general-purpose high voltage DC/DC converters. Output voltages are available in the range 100V to 3kV depending on model. All units are configured for direct PCB mounting and are intended to be "designed in" to customers’ equipment as
- DC Input Voltage: 24 volts
- DC Output Voltage: 50 to 100 volts
- DC Output Power: 1.5 watts
- Number of Outputs: 1 #
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: 3.3V Boost LVDS High-Speed Differential Line Drivers and Receivers Product overview: PI90LVB179 from Pericom Semiconductor Corp. (Diodes Incorporated) is a Boost DC-DC Converter IC for stable power rails, DC-DC conversion, battery-powered electronics, automotive modules, and embedded
-
Supplier: DigiKey
Description: PLURAL 12 BIT 64PIN ADC LVDS BRD
- Features: Other
-
Supplier: Newark, An Avnet Company
Description: ANALOG TO DIGITAL CONVERTER ADC, 16 BIT, 250MSPS, VQFN-64; Resolution (Bits):16bit; Sampling Rate:250MSPS; Input Channel Type:Differential, Single Ended; Data Interface:CMOS, LVDS, Parallel, Serial; Supply Voltage Type:Single RoHS Compliant: Yes
-
Supplier: Newark, An Avnet Company
Description: ANALOG TO DIGITAL CONVERTER ADC, 12 BIT, 250MSPS, QFN-48; Resolution (Bits):12bit; Sampling Rate:250MSPS; Input Channel Type:Differential, Single Ended; Data Interface:CMOS, LVDS, Parallel, Serial; Supply Voltage Type:Single RoHS Compliant: Yes
-
Supplier: Win Source Electronics
Description: Win Source Part Number: 1351813-5962-0720402VXC Category: Integrated Circuits (ICs) - Data Acquisition - Digital to Analog Converters (DAC) Package: Tray Standard Package: 1 Output Type: Current - Unbuffered Architecture: Current Sink Number of Bits: 14 Data Interface: LVDS - Parallel
- Settling Time: 0.012 µs
- Features: Other
- Interface Type: Parallel
-
Supplier: Acme Chip Technology Co., Limited
Description: MOTHERBOARD FOR LVDS ADC CARD
- Category: Development Board
Find Suppliers by Category Top
Featured Products Top
-
seamless high dynamic range (SHDR) technology. When enabled, the input signal path gain of the channel is automatically optimized on a sample-by-sample basis, minimizing converter noise on each sample without impacting linearity. The 11 MHz bandwidth, picoamp input analog buffers, wide (read more)
Browse Analog-to-Digital Converter (ADC) Chips Datasheets for DigiKey -
Equipped with auto-recover OTP, OVP, and overload protection to ensure long-term reliable operation in harsh industrial environments. Global Safety Certifications: UL, CE and TUV certified, complies with UL60950-1, UL508, EN60950-1, and EU LVD (read more)
Browse DC-DC Converters Datasheets for TPS Elektronik GmbH -
)/low-voltage positive/pseudo-emitter-coupled logic (LVPECL) or low-voltage differential signaling (LVDS) SYSREF input and LVDS SYSREF output allow CML to LVDS signal conversion, which simplifies clock and SYSREF alignment for various converters. The pulse retimer feature also can be used with (read more)
Browse RF and Microwave Connectors Datasheets for DigiKey
More Information Top
-
Bill of Materials - Microsoft Surface Pro 2 (64GB - WiFi only)
DisplayPort to LVDS Converter , 2 Lane DP Input, 2 Link LVDS Output .
-
PDF - HP ENVY Sleekbook 6-1010us
DisplayPort to LVDS Converter Analogix ANX3112 .
-
PDF - Volkswagen (7P6 035 670) 3G MMI Unit
LVDS Converter - FPD-Link to FDP-Link II, 5-43Mhz, AEC-Q100 Qualified Texas Instruments DS99R421QSQ .
-
Bill of Materials - HP ENVY Sleekbook 6-1010us
DisplayPort to LVDS Converter .
-
http://www.mouser.com/catalog/specsheets/DAK-TFT%20manual%20v1.10.pdf
Fig. 3a Ten pins to the right are left open, LVDS converter board.
-
PDF - Microsoft Surface Pro 2 (64GB - WiFi only)
DisplayPort to LVDS Converter , 2 Lane DP Input, 2 Link LVDS Output Logo, PS8625, A0, U08DGH GLJ6W, 3213 .
-
Frame transfer CCD driving circuit design for space camera
The driving circuit is composed of CCD image sensor, clock signal generator unit, power supply unit, microcontroller unit (MCU), high speed A/D converter and low-voltage differential signal ( LVDS ) converter .
-
Ceramic tiles failure detection based on FPGA image processing
We designed LVDS converter that convert signals from LVDS 3.3(V) to unipolar digital level.
-
Bill of Materials - Volkswagen (7P6 035 670) 3G MMI Unit
LVDS Converter - FPD-Link to FDP-Link II, 5-43Mhz, AEC-Q100 Qualified .
-
A Vertex Trigger based on Cylindrical Multiwire Proportional Chambers
FPGA II is connected to two SCSI-connectors to deliver ϕ-based data to the sum cards via LVDS converters [26], which transform the 3.3 V FPGA output (LVTTL, low voltage TTL) to a LVDS (low voltage differential standard) signal.
Indicates content that may require registration and/or purchase.