Products/Services for MEC Resistor
-
Resistors - (967 companies)Resistors are electrical components that oppose the flow of either direct or alternating current. They can be used to protect, operate, or control circuits. In combination with other components, resistors can also be used to make electrical...ConfigurationCategory / ApplicationTechnology / Construction -
Wirewound Resistors - (125 companies)Wirewound resistors are power resistors made by winding a metal wire around a core. Resistors are basic passive components which impart electrical resistance for the purpose of protecting or controlling a circuit. For more basic information about...
-
Power Resistors - (136 companies)Power resistors are used in power generation and distribution, high-voltage applications, control systems, and other power system applications. They include load banks, grounding resistors, and dynamic braking resistors. Load banks develop... -
Chip Resistors - (301 companies)Chip resistors are passive resistors with a form factor of an integrated circuit (IC) chip. Typically, they are manufactured using thin-film technology. Chip resistors are integrated circuit (IC) devices manufactured in square or rectangular chip... -
Current Sensing Resistors - (102 companies)Current sensing resistors convert the current flowing through it to a voltage drop. Monitoring or measuring this voltage drop allows the current through the resistor to be measured. Applications for current sensing resistors include power supplies... -
Dynamic Braking Resistors (DBRs) - (35 companies)Dynamic braking resistors (DBRs) produce braking torque and absorb the high amounts of energy generated by stopping electric motors. They are used in variable-speed drive systems such as elevators, cranes, and trains. Some DBRs are also used...
-
Shunt Resistors - (124 companies)Shunts resistors are connected in parallel with an instrument or component to divert electrical current. They provide an alternate path for current in case of failure. Shunt resistors are connected in parallel with an instrument or component...
-
Resistor, Capacitor Networks - (161 companies)Definition. Resistor, capacitor networks (RC networks) are integrated circuits (ICs) that contain resistor-capacitor arrays in a single chip. Applications. Some resistor, capacitor networks are used to suppress transmission-line effects on high...
-
Photoconductive Cells - (42 companies)Photoconductive cells are light-sensitive resistors, in which resistance decreases with an increase in light intensity when illuminated. Photoconductive cells are light-sensitive resistors in which resistance decreases with an increase in light...
-
Varistors - (232 companies)Varistors are voltage-clamping devices that can absorb current without damage. They are typically used in surge protection devices. Varistors are nonlinear two-electrode semiconductor voltage-dependant resistors. The current in a varistor...
Product News
-
RS Components, Ltd.
MEC – Navigational switch Module Navimec TM is a five position navigational switch solution, with excellent tactile feedback, IP67, ideal for data entry devices where joystick function is needed. It has a select switch in the middle and four navigational switches around it (RS 495-2135).The solution is available as a module (RS 146-846) as well as single parts for own PCB mounting. Illuminated versions are also available. We recommend through-hole version (For non-module) due to increased accuracy during mounting of the... (read more)Browse Navigational Instruments Datasheets for RS Components, Ltd. -
ASAP Semiconductor LLC
Resistors Chip resistors are integrated circuit (IC) devices that oppose the flow of electrical current, and are primarily used to protect, operate, and control circuits. They find use in a vast array of applications, including automotive, transport, industrial, consumer electronics, and IT & telecommunication industries. In particular, the consumer electronic industry has seen a high demand for chip resistors as technological advancements have brought about a new era of electronic products. Chip... (read more)Browse Resistors Datasheets for ASAP Semiconductor LLC -
Isabellenhutte USA
BRAKING RESISTORS / PRECHARGE RESISTORS BRAKING RESISTORS / PRECHARGE RESISTORS. Our UL-listed components are designed to support high loads (up to 3100 Watts) and high pulse rates (up to 31kW for 5 sec). Their compact size saves you space and make them easy to mount. Rugged Extruded Aluminum Housing. Flying leads and tab terminals available. IP 54 protection type. Customizable. PRECISION & POWER RESISTORS. When you can 't afford to take chances --take charge. When you are developing a design with no tolerance for failure --whether... (read more)Browse Shunt Resistors Datasheets for Isabellenhutte USA -
KOA Speer Electronics, Inc.
ANTI-SULFURATION CHIP RESISTORS Silver-based inner electrodes in flat chip resistors can lose conductivity when the silver reacts with sulfur in a high-sulfur environment. The electrodes can lose all conductivity and disconnect the circuit as sulfuration continues. KOA Speer has developed a complete line of anti-sulfur chip resistors and arrays to protect against sulfuration of the resistor electrodes. Learn more (read more)Browse Chip Resistors Datasheets for KOA Speer Electronics, Inc. -
ODG (Origin Data Global)
What is Neutral Grounding Resistor? The primary purpose of the Neutral Earthing Resistor is to reduce the flow of fault current from the neutral to the ground during a fault. This protects transformers, circuit breaker and other important equipment. Neutral Earthing Resistors are proven to reduce fault currents and voltage spikes. Below is a table that summarizes key effects on equipment protection. Evidence Aspect. Description of the Impact on Equipment Protective. Reduce Fault Current. The currents were reduced between 50-66%... (read more)Browse Resistor, Capacitor Networks Datasheets for ODG (Origin Data Global) -
Isabellenhutte USA
AVIATION AND AEROSPACE RESISTORS AVIATION AND AEROSPACE. Whenever highest reliability, precision and longevity are required, there is no way around the low-ohmic precision and power resistors from Isabellenh utte. It is not without reason that we have been supplying measuring resistors to the aerospace industry for more than ten years. We always meet the toughest quality standards and consider our customers ' individual requirements (ESCC 4001). In addition, the SnPb-tinned contacts avoid the forming of whisker and thus short... (read more)Browse Power Resistors Datasheets for Isabellenhutte USA -
Xiamen Innovacera Advanced Materials Co., Ltd.
Ceramic Cores for Electrical Resistors Innovacera ceramic cores are made by alumina ceramics and expertly designed to meet the demanding needs of various electrical resistors, making them the ideal choice for your components. Features: High hardness. Lower Noise Factor. Stable Resistance. Good Electrical Shock Loads. Laser Trimming Reliability. Excellent electrical insulation and thermal stability. Achieve Higher Integration Density. Ensuring Higher Power Density. Ceramic Core Size: Model. Material. Diameter(mm). Length(mm... (read more)Browse Aluminum Oxide and Alumina Ceramics Datasheets for Xiamen Innovacera Advanced Materials Co., Ltd. -
Isabellenhutte USA
Customized solutions for power resistors At Isabellenh utte USA, our engineering and product development team regularly partners with customers to envision, test, and create customized solutions for alloys, resistors, and sensors --including sample/test batches, and highly-tuned supply-chain programs. We are especially well-positioned to collaborate on: Specialized metallurgy requirements leveraging our proprietary alloys e.g. ZERANIN (R), MANGANIN (R), ISAOHM (R), and NOVENTIN (R). Precision sensing for current, voltage... (read more)Browse Power Resistors Datasheets for Isabellenhutte USA -
ODG (Origin Data Global)
How to Select the Right Shunt Resistor Key Takeaways. Use Ohm's Law to pick the right resistor value. Find resistance by dividing the wanted voltage drop by the highest current. Pick a shunt resistor with a power rating above the needed power. This stops overheating and keeps it safe to use. Think about where to place the shunt resistor in your circuit. Putting it in series gives better current readings. Parallel placement is not used often. Balance voltage drop and accuracy. Low resistance lowers voltage drop but may hurt accuracy... (read more)Browse Power Resistors Datasheets for ODG (Origin Data Global) -
ODG (Origin Data Global)
Band Resistor Color Code Calculator The Resistor Color Code Calculator is an easy-to-use online tool. It helps you decode the color bands on resistors. You can quickly find their resistance value. If you are making circuits for habitat studies or complex industrial electronics, this calculator is essential. It helps you find the right resistor specifications. Different types of resistors have stripes of various colors. Each color shows their resistance, how much it can change, and sometimes their reliability or temperature range... (read more)Browse Power Resistors Datasheets for ODG (Origin Data Global)
More Information
Indicates content that may require registration and/or purchase.
-
http://www.loadparts.com/catalog_R.htm
… Results
- CALIFORNIA R68473J100B - Loadparts Search Engine Results
- Recent advances in microbial fuel cells ( MFCs ) and microbial electrolysis cells ( MECs ) for wastewater treatment, bioenergy and bioproducts
By using the loading resistors the MEC electricity requirement was lowered.- http://calhoun.nps.edu/public/bitstream/handle/10945/40177/Miller_A_Simple_Linearized_1976.pdf?sequence=1
The IRC MEC-T92 or an equivalent should be used for the 50 ohm resistors and the IRC MEC -T9 or equivalent or the 1000 ohm resistance.- Immobilization of anode-attached microbes in a microbial fuel cell
A multimeter (2700, Keithley Instru- ments, Inc.) was used to monitor the voltage across an external resistor (Rex = 10 Ω, MEC ; 1000 Ω, MFC).- http://aaqr.org/VOL13_No1_February2013/26_AAQR-12-05-OA-0122_266-274.pdf
The MEC were connected in series with a 10 Ω resistor (to allow the circuit current measurement) when the electrolysis of CO2 was conducted.- Microbial BioEnergy: Hydrogen Production
where I=E/Rex is the current calculated in the MEC circuit based on measuring the cell voltage (E) across an external resistor (Rex), and dt the time increment.- AFERO 2013 29e Meeting of the AFERO, Paris, 17-18 January 2013 Centre of research of the Cordeliers, F - 75006 Paris, France
resistance to the weight loss and could result from an accumulation of compounds of the MEC and especially of those of the basal membrane.
Product Announcements
