Right Angle Gearbox

Description: Venture’s 790 Series right angle gearboxes can be used alone or combined with our standard 800 series acme screw actuators or our 850 series ball screw actuators and/or our 8500 series motor gearbox to provide an extremely versatile and reliable motorized or manual

• Multiple Outputs: Yes
• Reducer Input: Solid Shaft
• Reducer Output: Solid Shaft
• Reducer Style: Integral Base

Description: Venture’s very versatile 890 Series actuators combine our standard 8500 series DC motor gearbox with a right angle worm drive gearbox providing a rugged and reliable motorized gearbox typically used with the above floor rack and pinion style slide out system. It is

• Design Units: English
• Features: Integral Clutch
• Gearbox Ratio: 18 to 58 : 1
• Geared: Yes

Description: The Hyponic® is a right angle, all-steel hypoid gear drive. In addition to the patented Hypoid gear technology, the Hyponic® features patented Hypoid gear technology, maintenance-free grease lubrication, high efficiency operation, and

• Flange(s): Yes
• Gear Ratio: 5 to 1440 (X : 1)
• Gearing Arrangement: Hypoid
• Maximum Input Power: 0.1250 to 15 HP

Description: Venture’s very versatile 890 Series actuators combine our standard 8500 series DC motor gearbox with a right angle worm drive gearbox providing a rugged and reliable motorized gearbox typically used with the above floor rack and pinion style slide out system. It is

• Gear Ratio: 20 (X : 1)
• Gearing Arrangement: Worm
• Multiple Outputs: Yes
• Reducer Output: Solid Shaft

Description: Offering exceptional value for money, Wittenstein’s servo right angle bevel gear reducer provides the perfect solution in all applications where economic efficiency is a top priority. The alpha LK+ is the right-angle equivalent to the successful alpha LP+ low-backlash planetary

• Backlash: 15 arcmin
• Gear Ratio: 1 (X : 1)
• Gearing Arrangement: Bevel / Miter
• Maximum Input Speed: 6000 rpm

Description: The Hansen P4 gearbox is available in 19 different sizes, ranging from 6kNm to 1100 kNm output torque. It is available with two, three or four-gear stages and reduction ratios between 6.3:1 and 630:1. Housings are avialable with a parallel or right-angle shaft configuration, either

• Flange(s): Yes
• Gear Ratio: 6.3 to 630 (X : 1)
• Gearing Arrangement: Helical, Bevel / Miter
• Maximum Input Power: 58 to 10800 HP

Description: Paramax parallel and right angle drives are built on almost seven decades of Sumitomo excellence in power transmission engineering. Some of the largest, and most durable power transmission systems operating in the world were designed and manufactured by Sumitomo. With 26 standard

• Flange(s): Yes
• Gear Ratio: 6.3 to 500 (X : 1)
• Gearing Arrangement: Helical, Bevel / Miter
• Maximum Input Speed: 1800 rpm

Description: The Hansen P4 vertical gearbox is available in 16 different sizes, with up to 819,000 Nm output torque. It is available with two and three stages and reduction ratios between 6.3:1 and 500:1. Housings are avialable with a parallel or right-angle shaft configuration, either with a solid

• Gear Ratio: 6.3 to 500 (X : 1)
• Gearing Arrangement: Helical, Bevel / Miter
• Maximum Input Power: 166 to 5500 HP
• Maximum Input Speed: 1750 rpm

Description: 3000:1 · High efficiency, up to 98.5% per stage. · Modular structure. · Full planetary in-line and combined Gleason-planetary right-angle units available. · 1 to 4 reduction stages, on request 5 stages. · Optional spring applied

• Flange(s): Yes
• Gearing Arrangement: Spur, Planetary, Other
• Maximum Input Power: 737 HP
• Multiple Outputs: Yes

Description: Arrow Gear has produced a wide variety of complete gearboxes for commercial and aerospace applications. A key distinction of Arrow Gear is the company's extensive expertise in the production of spiral bevel gears. In fact, producing spiral bevel gears - which are inherently complex to

• Gearing Arrangement: Spur, Bevel / Miter, Hypoid
• Reducer Style: Integral Base, Motor Mount / Gearhead, Shaft Mount
• Shaft Alignment: Parallel In-line, Parallel Offset, Right Angle, Non-perpendicular Angled Shafts

Description: gearhead. It unleashes previously inaccessible potentials for innovations in a host of popular servo applications demanding low-to-medium precision. The LPK+ takes the LK+ right-angle gearbox and adds a planetary stage.

• Backlash: 8 to 15 arcmin
• Gear Ratio: 3 to 100 (X : 1)
• Gearing Arrangement: Bevel / Miter
• Maximum Input Speed: 6000 rpm

Description: Precipart's speed increasing and decreasing planetary systems, right angle and spur gearboxes can be found in critical applications from avionics to surgical robotics. Our design engineers customize configurations for optimal performance over the life of a program for accurate,

• Maximum Input Speed: 3750 to 8000 rpm
• Output Torque: 0.5000 to 500 In-lbs
• Reducer Style: Motor Mount / Gearhead

Description: gearhead. It unleashes previously inaccessible potentials for innovations in a host of popular servo applications demanding low-to-medium precision. The LPK+ takes the LK+ right-angle gearbox and adds a planetary stage.

• Backlash: 11 arcmin
• Flange(s): Yes
• Gear Ratio: 3 to 10 (X : 1)
• Gearing Arrangement: Bevel / Miter

Description: Offering excellent performance, the alpha SK+ offers various options when building your machines while enables the use of space-saving right angle servo gearboxes for many applications for which earlier coaxial gearboxes were necessary. The hypoid gearset, which is the

• Backlash: 4 to 5 arcmin
• Gear Ratio: 3 to 100 (X : 1)
• Gearing Arrangement: Hypoid
• Output Torque: 640 In-lbs

Description: Tolomatic's Slide-Rite™ Gearbox consists of two helical gears that mesh at right angles to turn power around any corner. They can operate in either direction and slide axially along keyed shafts. This unique floating design maintains perfect shaft alignment for easy

• Backlash: 60 arcmin
• Gear Ratio: 2 (X : 1)
• Gearing Arrangement: Helical
• Maximum Input Speed: 1200 rpm

Description: Tolomatic's Slide-Rite™ Gearbox consists of two helical gears that mesh at right angles to turn power around any corner. They can operate in either direction and slide axially along keyed shafts. This unique floating design maintains perfect shaft alignment for easy

• Backlash: 60 arcmin
• Gear Ratio: 1 (X : 1)
• Gearing Arrangement: Helical
• Maximum Input Speed: 1200 rpm

Description: Tolomatic's Slide-Rite™ Gearbox consists of two helical gears that mesh at right angles to turn power around any corner. They can operate in either direction and slide axially along keyed shafts. This unique floating design maintains perfect shaft alignment for easy

• Backlash: 60 arcmin
• Gear Ratio: 1 (X : 1)
• Gearing Arrangement: Helical
• Maximum Input Speed: 1200 rpm

Description: Tolomatic's Slide-Rite™ Gearbox consists of two helical gears that mesh at right angles to turn power around any corner. They can operate in either direction and slide axially along keyed shafts. This unique floating design maintains perfect shaft alignment for easy

• Backlash: 60 arcmin
• Gear Ratio: 1 (X : 1)
• Gearing Arrangement: Helical
• Maximum Input Speed: 1200 rpm

Description: Features Application support from inception to completion Designed and manufactured to customer specifications Advanced design and prototypes available Applications Construction Railway Maintenance Forestry Agricultural Oil Field Specialty Trucks

• Flange(s): Yes
• Gearing Arrangement: Spur, Helical, Planetary, Harmonic, Worm, Bevel / Miter, Cycloidal, Hypoid, Other
• Multiple Outputs: Yes
• NEMA Mount: Yes

Description: Tandler right angle shaft phasing gearboxes are especially designed for applications requiring timing, positioning, registration or narrow-range speed control. Incremental output shaft angular phase changes and continuous 360 degree correction are possible. Low backlash models

• Flange(s): Yes
• Gear Ratio: 1 to 4.5 (X : 1)
• Gearing Arrangement: Planetary
• Maximum Input Power: 1 to 75 HP

Description: Introducing Glide Right™ Right Angle Gearboxes, from W.C. Branham. Glide Rights are 100% mounting and bore interchangeable with the T-O-M Brand S-R.

• Gear Ratio: 1 (X : 1)
• Shaft Alignment: Right Angle

Description: Conic's RA is a patented speed adjusting and phase shifting differential that replaces right angle, planetary differential gearboxes. It combines zero-backlash harmonic gearing with a precision spiral bevel, right angle gearbox. It is available in 1:1 and

• Continuously Variable: Yes
• Integrated Gears: Yes
• Mounting: Base, Flange
• Output Shaft Position: Horizontal, Vertical Up, Vertical Down

Description: RAB-1 & RAB-2 Right Angle Drive, ratios 1:1 and 2:1 • Maximum input 1.4 Hp at 1800 rpm • Injection-molded glass-reinforced nylon housing • Single input shaft and single or double output shaft • Steel Zerol miter gears • Bearings

• Gear Ratio: 1 (X : 1)
• Gearing Arrangement: Bevel / Miter
• Output Torque: 12.4 In-lbs
• Shaft Alignment: Right Angle

Description: Designed for versatility, the right angle structure features an aluminium alloy housing for the highest stiffness and components made from hardened high strength steel are reliable under the most severe conditions. All grease filled gear head can be used in any orientation without

• Backlash: 6 arcmin
• Gear Ratio: 1 to 5 (X : 1)
• Gearing Arrangement: Helical
• Maximum Input Speed: 8000 rpm

Description: The DynaGear Right Angle Gearbox has been designed for highly dynamic servo applications. Thanks to its technological advantages, the DynaGear is a leading gearbox in the drive technology sector. The compact and rigid design utilizes a one piece aluminum housing to ensure

• Backlash: 4 to 7 arcmin
• Flange(s): Yes
• Gear Ratio: 3 to 150 (X : 1)
• Gearing Arrangement: Other

Description: The AGNEE Right Angle Worm Gearbox have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened and tempered. The Worm Wheel is made of Chill Cast

• Flange(s): Yes
• Gear Ratio: 5 to 4900 (X : 1)
• Gearing Arrangement: Worm
• Reducer Input: Hollow Shaft, Solid Shaft

Description: Overview The AnglGear, the original right angle drive, is widely recognized and is in use worldwide. The AnglGear provides manual or power transmission of rotary motion in a compact, standardized right angle unit. Our standard line of bevel gearboxes are available

• Backlash: 7.5 to 45 arcmin
• Gear Ratio: 1 to 2 (X : 1)
• Gearing Arrangement: Bevel / Miter
• Multiple Outputs: Yes

Description: ATLANTA Drive Systems, Inc. has a complete range of Right-Angle Bevel Gearboxes available for continuous applications for power transmission. Light, medium and heavy duty reducers are available, with spiral-bevel gears and ratios from 1:1 to 5:1. Typical applications for

• Gear Ratio: 2 (X : 1)
• Gearing Arrangement: Bevel / Miter
• Maximum Input Power: 1.01 HP
• Maximum Input Speed: 1500 rpm

Description: The WormMaster unit is available as a single or double reduction unit up to 4900:1 ratio, with a power capacity of up to 115kW. High torque capacity - compact design Heavy duty version - for demanding applications Variable mounting - design flexibility Unique Holroyd tooth form - high efficiency and

• Gear Ratio: Up to 4900 (X : 1)
• Gearing Arrangement: Worm
• Maximum Input Power: Up to 154 HP
• Reducer Input: Solid Shaft

Description: Gearbox WP 60-3, white aluminum, similar to RAL 9006 Gearboxes WP connect a Motor with a Drive Set at a 90° angle. The compact, maintenance-free planetary gearboxes are each available in three fixed gear ratios – 1:3, 1:5 and 1:7. The Gearboxes run quietly and have

• Backlash: 16 arcmin
• Flange(s): Yes
• Gear Ratio: 3 (X : 1)
• Gearing Arrangement: Planetary

Description: Ondrives.US offers a full line of Bevel right angle gearboxes. Our standard Bevel gearboxes feature one input and one output shaft; our Bevel T gearboxes feature one shaft that extends from both sides of the body, forming a “T” shape. We offer a variety of options,

• Backlash: Up to 120 arcmin
• Flange(s): Yes
• Gear Ratio: 1 to 2 (X : 1)
• Gearing Arrangement: Bevel / Miter

Description: The SVX is powered by the helical gearing system, high precision gear tooling and bevel gear grinding technology. The SVX is a great right angle servo gearbox solution for the standard precision motion related manufacturing applications.

• Backlash: 10 to 15 arcmin
• Flange(s): Yes
• Gear Ratio: 3 to 512 (X : 1)
• Gearing Arrangement: Helical, Planetary

Description: Groschopp The right angle planetary gearbox couples the high torque of a standard planetary to the small envelope of the right angle to create a powerful combination of size and torque. It is the ideal solution for applications that require lifting heavy loads in a

• Flange(s): Yes
• Gear Ratio: 5 to 10 (X : 1)
• Gearing Arrangement: Planetary
• Maximum Input Power: 1.26 HP

Description: Radicon parallel and right angle Industrial Gearboxes come in 11 sizes. The Series H has a maximum Output Torque to 117,000 Nm (1,035,450 lb.in.) and an Input Power up to to 8,300 kW (11,122 HP) and Gear Ratios up to 130:1. Series H InLine industrial gearboxes are

• Gear Ratio: Up to 130 (X : 1)
• Maximum Input Power: 11124 HP
• Output Torque: 1.04E6 In-lbs
• Reducer Input: Solid Shaft

Description: Animatics delivers total machine solutions. As passionate machine builders, we truly understand the associated challenges and demands of this endeavor. Our comprehensive solutions spring from the desire to deliver significant savings to machine builders by lowering the real world total cost of

• Backlash: 7 to 10 arcmin
• Gear Ratio: 3 to 100 (X : 1)
• Gearing Arrangement: Planetary
• Maximum Input Speed: 5000 rpm