-
Supplier: Qioptiq
Description: Mpixel sensor with up to 1 inch image diameter. The mechanical housing is designed with lockable screws to work in any machine vision environment and fits also to all commercially available 3 chip cameras with beam splitters. Highest optical performance Large image circle up
- Aperture Range (F-Number): 1.6 to 16
- Diameter: 42 mm
- Filter Thread Diameter: 35.5 mm
- Focal Length: 12 to 50 mm
-
Supplier: CSA Group
Description: ISO 19085-2:2017 gives the safety requirements and measures for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which are manually and/or powered loaded and manually unloaded, hereinafter referred to
-
Supplier: Shanghai Optics
Description: have high damage thresholds. Glan-Taylor Prism A Glan-Taylor prism is another type of polarizing beam splitter. It is formed of two right angled prisms mounted together, separated on their long face by an air gap. Incident light travels through a short side into hypotenuse side
- Coatings: Dielectric Coating
- Polarizing: Yes
-
-
Supplier: ASTM International
Description: platforms. It consists of an optical fiber coupler with a y-beam splitter that directs the scattered light signal from the nanoparticles at 180° back to a photodiode detector. The sensing end of the probe can be immersed in a suspension or positioned to measure one drop of a sample on
-
Supplier: ValueTronics International, Inc.
Description: : ± 0.5 nm (23 ± 5 °C), 1.0 nm (10 to 40°C) Repeatability: 0.1 nm or less (during one-minute repetitive sweep) Level Measurement range (input sensitivity): -85 to +10 dBm (1.1 to 1.6 µm); -75 to +10 dBm (0.7 to 1.6 µm); -70 to +10 d
Find Suppliers by Category Top
Featured Products Top
-
conferencing. Abrisa Technologies’ teleprompter beam splitter glass is the ideal choice for free standing presidential stage/speech set ups, camera-mounted configurations, and interface with personal cell/tablet devices. Features: High (read more)
Browse Optical Windows Datasheets for Abrisa Technologies -
) Quartz (200-2300nm) a -BBO a -BBO is used to guarantee a wide transmission range Especially, suitable for UV online_ordering Split the ordinary and extraordinary ray, but only ordinary beam is deviated (read more)
Browse Waveplates and Retardation Plates Datasheets for Foctek Photonics, Inc. -
polarization beam splitter cube and a waveplate optically contacted or cemented to the PBS. The C-lenses are lenses with a special surface profile, functioning as beam collimators, circulators, or focusing components for fiber lasers. Fast Axis Collimators (FAC-Lenses) and Slow Axis Collimators (SAC-Lenses) for collimating divergent light from diode lasers and laser bars along the fast axis or the slow axis are offered in custom versions. (read more)
Browse Laser Optics, Heads, and Beam Delivery Components Datasheets for Hangzhou Shalom Electro-optics Technology Co., Ltd. -
partially reflective mirrors and beam splitters/combiners are also available on ultra-thin substrates offering the advantage of virtually no beam or image translation. Ultra-thin, lightweight mirrors and optics are ideal for use in unmanned drones and UAV’s, hand-held surgical devices, compact (read more)
Browse Glass Materials Datasheets for Abrisa Technologies -
partially reflective mirrors and beam splitters/combiners are also available on ultra-thin substrates offering the advantage of virtually no beam or image translation. Ultra-thin, lightweight mirrors and optics are ideal for use in unmanned drones and UAV’s, hand-held surgical devices, compact (read more)
Browse Optical Mirrors Datasheets for Abrisa Technologies -
Array Cutting • Glass, Acrylic & Bonded Structures • Edge Printing, Graphics & Laser Marking Ideal for: • High Volume, Small Part Fabrication • Filters, Mirrors, Windows, Beam Splitters, Sights (read more)
Browse Cutting Services Datasheets for Abrisa Technologies -
Glass, Acrylic & Bonded Structures Edge Printing, Graphics & Laser Marking Ideal for: High Volume, Small Part Fabrication Filters, Mirrors, Windows, Beam Splitters, Sights • Precision Fit Rectangular (read more)
Browse CNC Machining Services Datasheets for Abrisa Technologies -
-MWIR 5um. Capabilities include antireflective (AR) and highly reflective (HR) metallic coatings, conductive, beam splitter coatings, and high laser damage capability. Coating techniques include Magnetron sputtering, ion assisted E-beam, and fluoride deposition. And finally, the heritage of your (read more)
Browse Optical and Light Microscopes Datasheets for Zygo Corporation -
Ideal for: • High Volume, Small Part Fabrication • Filters, Mirrors, Windows, Beam Splitters, Sights • Precision Fit Rectangular Components • “100%” Clear Aperture Parts • Wafer or Filter Glass Master (read more)
Browse Cutting Services Datasheets for Abrisa Technologies -
Cold mirrors are used for a wide range of applications that involve separating light by wavelength. Since the thin film coating on these mirrors transmits infrared away from the application while reflecting visible light at a designated angle, it is a highly effective beam splitter (read more)
Browse Optical Mirrors Datasheets for Shanghai Optics
More Information Top
-
In-process 3D assessment of micromoulding features
Both sources are deployed on the system by using a c - mount beam splitter to allow coaxial illumination and a fibre optic ring to provide a lateral source of light.
-
Multi-wave temperature radiometer by high-speed camera
… light weight Object lens; Micro Nikkor 105mm F2.8 F to C lens mount converter Band pass filter Spectrogon CWL 800nm, HW15nm Spectrogon CWL 980nm, HW56nm Filter holder, inserted at F to C lens mount converter Beam splitter , Edmond 50mm x 50mm …
-
British Journal of Cancer - Correlation of real-time haemoglobin oxygen saturation monitoring during photodynamic therapy with microvascular effects and tissue...
A short focal length lens was connected to the end of the light guide together with a 470±20 nm band pass filter and coupled to a 50/50 C - mounted plate beam splitter (Edmund Optics Ltd, York, UK) so that the excitation beam …
-
Moving up to high-resolution (dual 1920×1080): acquiring and visualizing stereoscopic noncompressed images in real-time for dentists and medical applicat...
Solid-Look stereo cameras can plug into the beam splitter 50/50 C - Mount of many brands of stereo microscopes and scopes for laparoscopic surgery.
-
Surgical Navigation
The reported imaging device consists of a compact assembly of an objective lens ( c - mount ), a beam splitter module, CCD image sensors, near infrared LEDs for fluorescence excitation, and a computer with software for image recording, superimposition and monitoring.
-
Optical-mechanical operation of the F2T2 Filter: a tunable filter
designed to search for First Light
Interference fringes, observed via a webcam attached with a C - mount to the beam splitter , are used to parallelize the plates in real-time with the external variable power supplies.
-
Gas gun shock experiments with single-pulse x-ray phase contrast imaging
and diffraction at the Advanced Photon Source
… e.g., 10×, working distance 33.5 mm, depth of focus 3.5 µm; Ed- mund Optics NT46-144); 2: Mitutoyo-to-C-mount objective adaptor (Edmund 55-743); 3: C - mount standard cube 50R- 50T beam splitter (Edmund 54-823); 4 …
-
The BP-900 - Imaging goes mainstream | Optician
The system I used incorporated a C - mount adapter with integral 70:30 beam splitter upon which a Sony Digital 1CCD firewire camera (DFW-X710) was mounted.
-
Trophozoite stage infected erythrocyte contents analysis by use of spectral imaging LED microscope
The emitted light from SS is gathered by the objective (OB1 or OB2) and transmitted by the beam splitter (BS) to the camera (CMOS) via a mount ( C - mount ).
-
Dynamical 3-Space: neo-Lorentz Relativity
Fig. 3: Schematic diagrams of the gas-mode Michelson Interferometer, with beam splitter /mirror at A and mirrors at B and C mounted on arms from A, with the arms of equal length L0 when at rest.