-
Supplier: Dura-Line
Description: placement as a permanent pathway and protective covering for fiber optic cables in a swampy/marshy environment, as the hermetical seal will prevent Hydrogen atoms from penetrating through to the fiber optics. Harsh Environment Conduit is available with a 1” or 1 ¼” HDPE
- Features: Flexible Conduit, Underground Rated
- Material: Polyethylene / HDPE, Stainless Steel, Other
- Type: LFNC
-
Supplier: Conax Technologies
Description: , Div. 1 and 2, Groups E, F, and G; and Class III. The HL Gland is superior to Chico® and other similar conduit sealing compound fittings commonly used in hazardous environments. With a mechanically-sealed Conax HL Gland, you will not have to be concerned about: cracks in
- Application: Cable & Wire
- Material: Stainless Steel
- Mounting Size: 0.5000 to 0.7500 inch
- Temperature Range: -4 to 131 F
-
Supplier: Altech Corp.
Description: slit. Add straight or 90° connectors with seals to complete the installation. Conduit Gland SEM-Fast Straight, quick-mounting system for Polyflex PA 6 conduit Material: Polyamide 66 Technical properties: Easy and tight
- Features: Rigid Conduit
- Material: Other
- Temperature Rating: -40 to 248 F
- Type: Other
-
-
Supplier: Altech Corp.
Description: slit. Add straight or 90° connectors with seals to complete the installation. Conduit Gland SEM-Fast angled 90°, quick-mounting system for Polyflex PA 6 conduit Material: Polyamide 66 Technical properties: Easy and tight
- Features: Rigid Conduit
- Material: Other
- Temperature Rating: -40 to 248 F
- Type: Other
-
Supplier: Altech Corp.
Description: slit. Add straight or 90° connectors with seals to complete the installation. POLYFLEX®, PA 6 normal profile conduit Material: Polyamide 6 Upper temperature range: Short-term: 150°C, (302°F)
- Conduit Size: 0.2638 to 2.13 inch
- Features: Flexible Conduit
- Material: Other
- Temperature Rating: -40 to 248 F
-
Supplier: Galco Industrial Electronics
Description: Class 1 Conduit Seal with Dam Solution
-
Supplier: Galco Industrial Electronics
Description: Vertical Conduit Seal with Dam Solution
-
Supplier: Galco Industrial Electronics
Description: Class 1 Conduit Seal with Dam Solution
-
Supplier: O-Z/Gedney
Description: HOT DIP GALVANIZED MALLEABLE/DUCTILE IRON MATERIAL 4 INCH EXPOSED WIRE, RUBBER/PLASTIC INSULATED CABLE USED ON (2) 1.99 INCH/(3) 1.91 INCH/(4) 1.6 INCH WIRE SIZE CSA APPROVAL 6-7/8 INCH DIAMETER 5 INCH CONDUIT SIZE WITH NEOPRENE RING SEAL ZINC PLATED LOCKNUT HRE MODEL
- Conduit Size: 6.88 inch
- Material: Galvanized Steel
- Type: Other
-
Supplier: O-Z/Gedney
Description: HOT DIP GALVANIZED MALLEABLE/DUCTILE IRON MATERIAL 3-3/8 INCH EXPOSED WIRE, RUBBER/PLASTIC INSULATED CABLE USED ON (1) 2.65 INCH/(2) 1.4 INCH/(3) 1.34 INCH/(4) 1.12 INCH WIRE SIZE CSA APPROVAL 5 INCH DIAMETER 3-1/2 INCH CONDUIT SIZE WITH NEOPRENE RING SEAL ZINC PLATED LOCKNUT
- Conduit Size: 5 inch
- Material: Galvanized Steel
- Type: Other
-
Supplier: O-Z/Gedney
Description: HOT DIP GALVANIZED MALLEABLE/DUCTILE IRON MATERIAL 3-1/8 INCH EXPOSED WIRE, RUBBER/PLASTIC INSULATED CABLE USED ON (1) 1.83 INCH/(2) 0.97 INCH/(3) 0.93 INCH/(4) 0.78 INCH WIRE SIZE CSA APPROVAL 3-5/8 INCH DIAMETER 2-1/2 INCH CONDUIT SIZE WITH NEOPRENE RING SEAL ZINC PLATED
- Conduit Size: 3.62 inch
- Material: Galvanized Steel
- Type: Other
-
Supplier: O-Z/Gedney
Description: ZINC PLATED STEEL MATERIAL 2-1/4 INCH EXPOSED WIRE, RUBBER/PLASTIC INSULATED CABLE USED ON (1) 1.02 INCH/(2) 0.55 INCH/(3) 0.5 INCH/(4) 0.44 INCH WIRE SIZE CSA APPROVAL 2-3/8 INCH DIAMETER 1-1/4 INCH CONDUIT SIZE WITH NEOPRENE RING SEAL ZINC PLATED LOCKNUT HRE MODEL
- Conduit Size: 2.38 inch
- Material: Steel
- Type: Other
-
Supplier: Altech Corp.
Description: slit. Add straight or 90° connectors with seals to complete the installation. POLYFLEX®, PA 6 normal profile conduit Material: Polyamide 6 Upper temperature range: Short-term: 150°C, (302°F)
- Diameter: 0.1102 to 1.88 inch
- Material: Other
- Operating Temperature: -40 to 12 C
- Sleeving: Split Wire Loom
-
Supplier: Teguar Corporation
Description: i5 CPU and has the option for TPM 2.0 hardware security. 19” Resistive or PCap Touchscreen 6th Gen Intel Core i5 CPU Cable Gland for Sealed I/O Connections Fully Waterproof, Fanless Design IP66, IP69K, Optional IP67
- Display Size: 19 inch
- Features: Integrated BluetoothTM Technology, Panel Mount, Touch Screen
- Operating System: Microsoft®
- Processor: Intel®
-
Description: To develop design, evaluation and installation requirements for conduit and cable seals used in the field connected power, control and instrumentation wiring systems to equipment in the petroleum and chemical industry exposed to pressures above atmospheric (1.5 kilopascals ,
-
Supplier: igus® inc.
Description: +105 °C), or a short time up to +320°F (+160°C) Content of delivery IP66: Fitting with pre-assembled universal safety clips (AFN2) Content of delivery IP68: Fitting with oval clips (OVN2), conduit and thread seal (NVN3, SVN4) Features: high grade formulated polyamide, excellent impact
- Compatible With: ENT
- Type: Elbow
-
Supplier: igus® inc.
Description: +105 °C), or a short time up to +320°F (+160°C) Content of delivery IP66: Fitting with pre-assembled universal safety clips (AFN2) Content of delivery IP68: Fitting with oval clips (OVN2), conduit and thread seal (NVN3, SVN4) Features: high grade formulated polyamide, excellent impact
- Compatible With: ENT
- Type: Elbow
-
Supplier: Accuris
Description: REQUIREMENTS FOR CONDUIT AND CABLE SEALS FOR FIELD CONNECTED WIRING TO EQUIPMENT IN PETROLEUM AND CHEMICAL INDUSTRY EXPOSED TO PRESSURES ABOVE ATMOSPHERIC (1.5 KPA, 0.22 PSI)
-
Description: Provided in this document are specific requirements for field installed sealing between a pressurized system (stream) containing flammable or combustible process fluids which is connected directly or indirectly to an electrical system where a failure could allow the migration of processfluids
-
Supplier: Eldon Enclosures
Description: Plastic cable entry for a fast, economical and tool-free incoming of cables and/or pneumatic conduits inside the enclosure. Integrated seal. For snap-in fastening (only for wall thicknesses ranging between 1.4 and 2 mm) and/or screwing. Installation height: 15.5 mm.
- Mounting Frame Material: Plastic
-
Circular Connectors - Connectors Circular,Accssy-Boots,Caps,Strn Relfs,Seal Plugs,etc. -- 749-283-01Supplier: Heilind Electronics, Inc.
Description: CONDUIT PRODUCTS CABLE ASSY
-
Supplier: CMP Products
Description: CMP Type PXRC Certified Flameproof (Type 'd'), Increased Safety (Type 'e') indoor and outdoor cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with all types of unarmoured cable housed in conduit systems. The cable gland provides a compound
- Material: Aluminum, Brass, Stainless Steel
- Temperature Range: -76 to 212 F
-
Supplier: icotek GmbH
Description: Product description The split KVT-W90 cable glands are used to insert and seal (IP54) pre-terminated cables and conduits at a 90° angle. In particular, the KVT 50-W90 is perfectly suited to hold corrugated conduits. A large number of KT cable entry inserts
- Application: Cable & Wire
- Material: Other
- Mounting Size: 1.26 to 1.98 inch
- Temperature Range: -22 to 212 F
-
Supplier: icotek GmbH
Description: The split KVT-W90 cable glands are used to insert and seal (IP54) pre-terminated cables and conduits at a 90° angle. In particular, the KVT 50-W90 is perfectly suited to hold corrugated conduits. A large number of KT cable entry inserts is available to the
- Application: Industrial, Marine, Panel / Enclosure, Railway, Telecommunications
- Barrier Hole Shape: Round
- Cable Diameter: 0.0787 to 1.34 inch
- Circular Hole Diameter: 0.4528 inch
-
Supplier: Eldon Enclosures
Description: Round plastic cable entry for a fast, economical and tool-free incoming of cables and/or pneumatic conduits inside the enclosure. Integrated seal. For snap-in mounting. Snap-in system works at wall thicknesses of 1.4 to 2 mm. Installation height: 9 mm outside, and 24-25
- Cable Diameter: 2.28 inch
- Circular Hole Diameter: 1.99 inch
- Mounting Frame Material: Plastic
-
Supplier: icotek GmbH
Description: The split cable entry system KEL 183 enables the user to route cables and conduits with a diameter up to 75 mm and to seal them in accordance with IP54. For cables from 16 to 34 mm the cable inserts KT large can be used. With the split cable inserts,
- Adjustable Diameter: Yes
- Application: Industrial, Panel / Enclosure, Power / Utility, Railway, Telecommunications
- Barrier Hole Shape: Square / Rectangular
- Cable Diameter: 0.0984 to 2.95 inch
-
Supplier: CMP Products
Description: housed in rigid or flexible conduit systems. The cable gland provides a combined flameproof seal and environmental seal on the cable outer sheath. This product provides full compatibility with restricted breathing equipment. All CMP Cable Glands are EMC
- Material: Aluminum, Brass, Stainless Steel
- Temperature Range: -76 to 266 F
-
Supplier: Honeywell Sensing & IoT
Description: without the need for frequent adjustment than drive trains with plastic parts,) self-lifting pressure plate terminals save wiring time, easily identified grounding terminal (inside) for compliance with OSHA and other regulatory agency standards, one piece flat gasket (seals better than
- Actuator Type: Wobble Type (Spring)
- Certifications / Approvals: CE Certification?, CSA Certification?, UL listed?, Other
- Maximum AC Voltage Rating: 600 volts
- Maximum Current Rating: 10 amps
-
Supplier: Honeywell Sensing & IoT
Description: without the need for frequent adjustment than drive trains with plastic parts,) self-lifting pressure plate terminals save wiring time, easily identified grounding terminal (inside) for compliance with OSHA and other regulatory agency standards, one piece flat gasket (seals better than
- Actuator Type: Wobble Type (Spring)
- Certifications / Approvals: CE Certification?, CSA Certification?, UL listed?, Other
- Maximum AC Voltage Rating: 600 volts
- Maximum Current Rating: 10 amps
-
Supplier: Honeywell Sensing & IoT
Description: without the need for frequent adjustment than drive trains with plastic parts,) self-lifting pressure plate terminals save wiring time, easily identified grounding terminal (inside) for compliance with OSHA and other regulatory agency standards, one piece flat gasket (seals better than
- Actuator Type: Wobble Type (Spring)
- Certifications / Approvals: CE Certification?, CSA Certification?, UL listed?, Other
- Maximum AC Voltage Rating: 600 volts
- Maximum Current Rating: 10 amps
-
Supplier: Honeywell Sensing & IoT
Description: without the need for frequent adjustment than drive trains with plastic parts,) self-lifting pressure plate terminals save wiring time, easily identified grounding terminal (inside) for compliance with OSHA and other regulatory agency standards, one piece flat gasket (seals better than
- Actuator Type: Wobble Type (Spring)
- Certifications / Approvals: CE Certification?, CSA Certification?, UL listed?, Other
- Maximum AC Voltage Rating: 600 volts
- Maximum Current Rating: 10 amps
-
Supplier: RS Components, Ltd.
Description: Fast-fit externally threaded 90° elbow conduit fitting with additional conduit seal. Suitable for knockouts. Fast fit. Supplied with additional conduit seal and retained face seal. IP rating: IP66 + IP67 + IP68 (2 bar) + IP69. Vibration and shock tested to
- Conduit Size: 0.8268 inch
- Material: Nylon
- Type: Elbow, Other
-
Supplier: RS Components, Ltd.
Description: Fast-fit externally threaded 45° elbow conduit fitting with additional conduit seal. Suitable for knockouts. Fast fit. Supplied with additional conduit seal and retained face seal. IP rating: IP66 + IP67 + IP68 (2 bar) + IP69. Vibration and shock tested to
- Conduit Size: 1.1 inch
- Material: Nylon
- Type: Elbow, Other
-
Supplier: RS Components, Ltd.
Description: Fast-fit externally threaded 90° elbow conduit fitting with additional conduit seal. Suitable for knockouts. Fast fit. Supplied with additional conduit seal and retained face seal. IP rating: IP66 + IP67 + IP68 (2 bar) + IP69. Vibration and shock tested to
- Conduit Size: 1.1 inch
- Material: Nylon
- Type: Elbow, Other
-
Supplier: RS Components, Ltd.
Description: Thermoplastic elastomer cap used to seal conduit ends. Can be cut to size depending on cable size. Can be additionally secured using cable ties (not supplied). Fitting Type = Rubber End Cap Nominal Size = 54mm Material = Thermoplastic Elastomer Series = REC For Use With =
- Conduit Size: 2.13 inch
- Material: Other
- Type: Cap, Other
-
Supplier: icotek Corp
Description: QVT is a circular split frame for quick and easy installation of pre-terminated cables or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed and sealed with IP54.
- Application: Cable & Wire
- Material: Other
- Number of Elements: 16 #
- Opening Diameter: 0.5906 inch
-
Supplier: icotek Corp
Description: QVT is a circular split frame for quick and easy installation of pre-terminated cables or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed and sealed with IP54.
- Application: Cable & Wire
- Material: Other
- Number of Elements: 2 #
- Opening Diameter: 0.4331 inch
-
Supplier: icotek Corp
Description: QVT is a circular split frame for quick and easy installation of pre-terminated cables or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed and sealed with IP54.
- Application: Cable & Wire
- Material: Other
- Number of Elements: 8 #
- Opening Diameter: 0.5906 inch
-
Supplier: icotek Corp
Description: QVT is a circular split frame for quick and easy installation of pre-terminated cables or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed and sealed with IP54.
- Application: Cable & Wire
- Material: Other
- Number of Elements: 4 #
- Opening Diameter: 0.5906 inch
Find Suppliers by Category Top
Featured Products Top
-
doesn’t just keep interference out; it also keeps emissions in, which is vital to meeting European CE standards – an important issue for OEMs. Additionally, shielding conduits provide a redundant EMI/RFI system protection when using shielded cables with EMI/RFI shielded (read more)
Browse EMI and RFI Shielding Datasheets for Electri-Flex Company -
. Electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can also be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12. (read more)
Browse Cable Glands Datasheets for icotek Corp -
2.24” Prewired cable (2 meter) or M12 quick connect, from side or bottom Symmetrical housing Plastic body with metal mounting head PS215 & PS216 1.2“ x 1.3“ x 2.6" Screw (read more)
Browse Limit Switches Datasheets for Schmersal Inc. -
Chico® and similar conduit sealing compound fittings commonly used in hazardous environments. With a mechanically sealed Conax HL Fitting, you won’t need to worry about: Cracks in compound sealant or incorrectly installed compound sealants that allow (read more)
Browse Cable Glands Datasheets for Conax Technologies -
patented cables, ensures a fast, watertight and error-free connection to the data infrastructure. The standard installation dimensions as well as flexibly selectable seals and process adapters enable easy integration even in existing systems. Parameterization is achieved in the shortest possible time (read more)
Browse Liquid Flow Meters Datasheets for ifm electronic gmbh -
surges, overhead power cabling at the mercy of weather elements allow surges to travel great distances to various distribution systems, and wires running from the tower’s antennas to the base station (among others) also serve as conduits for spikes. Since the infrastructure relies (read more)
Browse Transient Voltage Suppressor Diodes (TVS) Datasheets for MDE Semiconductor, Inc.
More Information Top
-
User experience with wiring methods and materials in industrial facilities of the United States and Canada
Typical cable conduit seal (showing seal cut away).
-
Aging and loss-of-coolant accident (LOCA) testing of electrical connections
Conduit Seals cable , without any connections, were included as part of the test to confirm that cable elects can be - Conax Bufl-alo Electric Conductor Seal isolated: Assembly * Other (cable runs with no connections) - Patel/EGS Conduit Seal - Rosemount 353C Conduit Seal - Rockbestos…
-
Letter of intent for the study of CP violation and heavy flavor physics at PEP-II
For example, the use of passive fire protection is envisioned through- out the detector by stressing the employment of non-flammable materials for detector construction (cables etc.), and implementing sealed cable conduits to reduce fire spreading rates.
-
Migration of fluids through a wiring system
One of the conclusions in the previous article was that the cable and conduit seals are frequently installed improperly.
-
Electrical process seal requirements in North American Electrical Codes
Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids [4] currently exist and IEEE PAR 1673 Requirements for Conduit and Cable Seals for Field Connected Wiring to Equipment in Petroleum and Chemical Industry Exposed to Pressures Above 1…