Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: VanSeal
Description: Additional materials may be available, pressures to 25 psi
- Axial Cross Section or Thickness: 0.6880 inch
- Housing Bore Diameter or Seal O.D.: 3.5 inch
- Maximum Operating Pressure: 25 psi
- Seal Construction: Metal Cased (Single)
-
Supplier: Trelleborg Sealing Solutions Americas
Description: HP20 is an elastomeric rotary oil seal suitable for sealing medium to high hydraulic oil pressure at low to medium shaft speeds. Available in FPM and HNBR for standard and low temperature environments.
- Maximum Operating Pressure: 682 psi
- Maximum Operating Speed: 787 ft/min
- Operating Temperature: -22 to 212 F
- Seal Type: Oil / Grease Seal, Other
-
Supplier: VanSeal
Description: Additional materials may be available, rubber O.D., pressures to 25 psi
- Axial Cross Section or Thickness: 0.3750 inch
- Housing Bore Diameter or Seal O.D.: 3.25 inch
- Maximum Operating Pressure: 25 psi
- Seal Construction: Metal Cased (Single)
-
-
Supplier: VanSeal
Description: Additional materials may be available, excluder, pressures to 25 psi
- Axial Cross Section or Thickness: 0.4690 inch
- Housing Bore Diameter or Seal O.D.: 3.54 inch
- Integral Wiper or Scraper Element: Yes
- Maximum Operating Pressure: 25 psi
-
Supplier: Shenzhen Dechengwang Technology Co., Ltd
Description: provides solutions for even the most demanding application requirements. Why Order PTFE Teflon® Seals from Us? Have you tried standard seal profiles and found that they aren't quite right? Or are you tried with the standard seals? In Dechengwang, We can adapt
- Seal Type: Oil / Grease Seal
- Sealing Element or Lip Material: Polytetrafluoroethylene (PTFE- Teflon®, etc.)
-
Supplier: Freudenberg Sealing Technologies
Description: Technologies in various designs and materials. The Simmerring® Oil Seal with standard designs according to DIN 3760 offers a wide range of applications for all areas of industry.
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Nitrile - Highly Saturated (HNBR), Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Sealing Orientation and Direction: Internal / Rod Seal
-
Supplier: T-LON Products, Inc.
Description: load and is further energized by system pressure. The TV series is available in standard and custom Rod, Piston and Face seal designs to meet your specific application requirements.
- Axial Cross Section or Thickness: 0.4850 inch
- Maximum Operating Pressure: 10000 psi
- Maximum Operating Speed: 400 ft/min
- Operating Temperature: -250 to 575 F
-
Supplier: T-LON Products, Inc.
Description: further energized by system pressure. The TS series is available in standard and custom Rod, Piston, and Face seal designs to meet your specific application requirements.
- Axial Cross Section or Thickness: 0.4850 inch
- Maximum Operating Pressure: 10000 psi
- Maximum Operating Speed: 4000 ft/min
- Operating Temperature: -250 to 575 F
-
Supplier: Roettele Industries, Inc.
Description: Roettele Industries specializes in precision die-cutting of rubber gaskets, washers, seals and diaphragms. There are key features to our manufacturing process that are essential in meeting or exceeding customer requirements. Roettele Industries offers a diverse collection of rubber compounds
-
Supplier: T-LON Products, Inc.
Description: load and is further energized by system pressure. The TH series is intended for static or very low dynamic applications and is available in standard and custom Rod, Piston and Face seal designs to meet your specific requirements.
- Axial Cross Section or Thickness: 0.4850 inch
- Maximum Operating Pressure: 10000 psi
- Maximum Operating Speed: 20 ft/min
- Operating Temperature: -250 to 575 F
-
Supplier: Freudenberg Sealing Technologies
Description: The caps of Freudenberg Sealing Technologies are available in various designs: from the standard solution and designs with a vulcanised reinforcement plate to numerous special shapes. The caps are characterised by their stable structural design. They are used for the safe sealing of round
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N)
- Sealing Orientation and Direction: Internal / Rod Seal
-
Supplier: Hi-Tech Seals, Inc.
Description: The T-seal comes in both piston (TPO) and rod (TRO) styles, and can be installed in standard O-ring grooves. The T-seal is a double acting seal. The Back-up rings and sturdy base help prevent extrusion and spiralling up to 5,000 PSI. Standard T-seals are
- Dual Lip Elements: Opposed
- Operating Temperature: 392 to 500 F
- Seal Construction: All Rubber or Polymer
- Seal Type: Double Lip Oil Seal
-
Supplier: Accuris
Description: OIL - MINERAL SEAL
-
Supplier: SKF/North America
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 2.56 inch
- Housing Bore Diameter or Seal O.D.: 77.91 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 1.18 inch
-
Supplier: SKF/North America
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 0.9800 inch
- Housing Bore Diameter or Seal O.D.: 75.98 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 0.5900 inch
-
Supplier: SKF/North America
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 3.94 inch
- Housing Bore Diameter or Seal O.D.: 90.15 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 0.7870 inch
-
Supplier: SKF/North America
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 0.4100 inch
- Housing Bore Diameter or Seal O.D.: 72.05 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 0.2600 inch
-
Description: seal type the following standard elastomers are used: - Type DO - Cast Iron and Acrylonitrile Butadiene Rubber (NBR) - Type DO - Bearing Steel (1.3505) Acrylonitrile Butadiene Rubber (NBR)
- Axial Cross Section or Thickness: 1.06 to 1.57 inch
- Maximum Operating Pressure: 21.76 psi
- Maximum Operating Speed: 433 ft/min
- Operating Temperature: -22 to 302 F
-
Supplier: Shenzhen Dechengwang Technology Co., Ltd
Description: provides solutions for even the most demanding application requirements. Why Order PTFE Teflon® Seals from Us? Have you tried standard seal profiles and found that they aren't quite right? Or are you tried with the standard seals? In Dechengwang, We can adapt
-
Supplier: CinchSeal
Description: assembly and stop leaks as well. The design currently covers Dodge and Falk. The metal seals are air-purged by drilling and tapping the CEMA adapter housing for standard pipe thread. As top mechanical cartridge seal manufacturers, CinchSeal has the experience and
- Seal Type: Oil / Grease Seal, Exclusion Seal, Other
-
Supplier: Saint-Gobain Performance Plastics - High Performance Seals, Polymer Components and Springs
Description: used where ultra-low friction, chemical compatibility and extreme temperature is required. Originally developed to meet severe conditions encountered in turbine engines, rockets and missiles, and later to serve the most challenging oil and gas applications. Today, OmniSeal® spring
- Maximum Operating Pressure: 50009 psi
- Operating Temperature: -450 to 601 F
- Seal Construction: All Rubber or Polymer
- Seal Type: Single Lip Oil Seal
-
Supplier: Saint-Gobain Performance Plastics - High Performance Seals, Polymer Components and Springs
Description: . Today, OmniSeal® spring energized seal products are accepted for use in a wide range of applications. OmniSeal® products are designed to fit in all standard hardware glands such as MIL-G-5514, AS4716, Industrial, Metric, JIS, and custom gland sizes. OmniSeal®
- Maximum Operating Pressure: 50009 psi
- Operating Temperature: -450 to 601 F
- Seal Construction: All Rubber or Polymer
- Seal Type: Single Lip Oil Seal
-
Supplier: Saint-Gobain Performance Plastics - High Performance Seals, Polymer Components and Springs
Description: , chemical compatibility and extreme temperature is required. Originally developed to meet severe conditions encountered in turbine engines, rockets and missiles, and later to serve the most challenging oil and gas applications. Today, OmniSeal® spring energized seal products
- Maximum Operating Pressure: 50009 psi
- Operating Temperature: -450 to 601 F
- Seal Construction: All Rubber or Polymer
- Seal Type: Single Lip Oil Seal
-
Supplier: Saint-Gobain Performance Plastics - High Performance Seals, Polymer Components and Springs
Description: and gas applications. Today, OmniSeal® spring energized seal products are accepted for use in a wide range of applications. OmniSeal® products are designed to fit in all standard hardware glands such as MIL-G-5514, AS4716, Industrial, Metric, JIS, and custom gland sizes
- Maximum Operating Pressure: 50009 psi
- Operating Temperature: -450 to 601 F
- Seal Construction: All Rubber or Polymer
- Seal Type: Single Lip Oil Seal
-
Supplier: Daemar Inc.
Description: lubrication. The secondary function of a rotary shaft seal is to exclude contaminants from the system, contaminants that can both damage bearings and break down the effectiveness of lubricants.This catalogue provides a listing of Daemar’s standard rotary shaft seal styles and
- Axial Cross Section or Thickness: 0.3130 inch
- Housing Bore Diameter or Seal O.D.: 1.58 inch
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N)
- Shaft O.D. or Seal I.D.: 0.6250 inch
-
Description: Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
-
Supplier: SAE International
Description: This material has resistance to diester-based engine oil (MIL-PRF-7808) and fuel, but usage is not limited to such applications. This material is not suitable for use in synthetic phosphate ester based hydraulic fluids (AS1241) or helicopter transmission lubricating oils
-
Supplier: Chromalox
Description: 0.475 (12.1 mm) dia. Steel Sheath Heating Elements High Temperature Centrifugal Pump - Rated to 650°F (343°C) Electronic Digital Temperature and Process Control Chromalox MOS Mid-Size Hot Oil System is engineered to operate to 600°F (315°C) standard
- Area Classification: Class 1 Division 2
- Discharge Pressure: 100 psi
- Enclosure rating: NEMA 12, NEMA 4
- Expansion Tank Capacity: 25 to 85 gallons
-
Supplier: Edwards Vacuum
Description: the H series Microvac rotary piston pump. This pump is fitted with a 230/460V coil for control of the oil solenoid valve which prevents the pump from flooding with oil in the case of power failure or a loss of vacuum. In addition oil temperature/heater ports have been added as
- Applications: General Purpose / Industrial, Chemical / Corrosive Gas, Manufacturing Processing, Pharmaceutical / Sanitary, Other
- Configuration: Individual Vacuum Pump
- Gas Ballast: Yes
- Lubrication Style: Positive Pressure
-
Supplier: Edwards Vacuum
Description: The Stokes Microvac rotary piston pump sets the standard for performance and reliability as the industrys most efficient, space-saving design. The Stokes Microvac rotary piston pump has been improved, upgraded, and fine-tuned to deliver even better dependability and productivity combined with
- Applications: General Purpose / Industrial, Chemical / Corrosive Gas, Manufacturing Processing, Pharmaceutical / Sanitary, Other
- Configuration: Individual Vacuum Pump
- Gas Ballast: Yes
- Lubrication Style: Positive Pressure
-
Supplier: SAE International
Description: Technical Standard
-
Supplier: SAE International
Description: Technical Standard
-
Supplier: CinchSeal
Description: CinchSeal's rotary shaft seals have been designed and manufactured to meet stringent USDA Approved standards we have utilizing acorn nuts to isolate fastening threads during production runs, manufactured 1/8" radii in the 90 degree corners to eliminate bacteria build up, and
- Seal Construction: Metal Cased (Single)
- Sealing Element or Lip Material: Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Sealing Orientation and Direction: Axial Seal
-
Supplier: John Crane, Inc.
Description: Type 28EXP: The product for the most challenging and hostile environments with proven and independently audited performance to 425 bar(g). Type 28 compressor dry-running gas seals have been the industry standard since early 1970 for gas-handling turbomachinery. Utilizing John
- Alternate Shaft or Rubbing Speed: 39600 ft/min
- Mechanical Seal Type: Single Mechanical Seal
- Operating Pressure: 6500 psi
- Operating Temperature: -220 to 600 F
-
Supplier: FTL Technology
Description: With over 500 PTFE compounds to choose from and with a unique manufacturing process, our PTFE shaft seals can be tailored specifically to the final application. To cover a broader range of applications, including the Food and Pharmaceutical industries, we have two standard ranges
- Maximum Operating Pressure: 7.25 to 145 psi
- Maximum Operating Speed: 3937 to 5906 ft/min
- Operating Temperature: -76 to 392 F
- Seal Type: Oil / Grease Seal
-
Supplier: John Crane, Inc.
Description: applications requiring slow roll and coast-down conditions. Type 28 compressor dry-running gas seals have been the industry standard since early 1970 for gas-handling turbomachinery. Utilizing John Crane’s patented spiral groove pattern, these seals are non-contacting in
- Alternate Shaft or Rubbing Speed: 39600 ft/min
- Mechanical Seal Type: Single Mechanical Seal
- Operating Pressure: 6500 psi
- Operating Temperature: -220 to 600 F
-
Supplier: John Crane, Inc.
Description: industry standard since early 1970 for gas-handling turbomachinery. Utilizing John Crane’s patented spiral groove pattern, these seals are non-contacting in operation. During dynamic operation, the mating ring/seat and primary ring/face maintain a sealing gap of approximately 0.0002"/5
- Alternate Shaft or Rubbing Speed: 394 ft/min
- Mechanical Seal Type: Single Mechanical Seal
- Operating Pressure: 1450 psi
- Operating Temperature: -4 to 392 F
-
Supplier: Enercorp Instruments Ltd.
Description: Our oil-sealed model has been designed specifically to monitor bearing temperatures. An integral oil-seal prevents leakage. The spring loaded sheath ensures rapid heat transfer to the sensor. A large threaded cast aluminum head with O-ring gasket is standard. Electrical
-
Supplier: Accuris
Description: SYNTHETIC RUBBER OIL SEAL COMPOUND
-
Supplier: FTL Technology
Description: power to be converted to linear motion. Typically these are manufactured from NBR, FKM, PUR and filled PTFE materials and used in conjunction with standard mineral based hydraulic oils. Ensuring that a seal system retains 100% leak free is a primary goal when specifying the
- Seal Type: Hydraulic / Pneumatic Seal
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Polytetrafluoroethylene (PTFE- Teflon®, etc.), Polyurethane / Urethane
- Sealing Orientation and Direction: Internal / Rod Seal, External / Piston Seal
-
Supplier: SAE International
Description: This specification covers a nitrile rubber (NBR) in the form of molded compression seals such as O-rings, T-seals, and molded-in-place gaskets for aeronautical and aerospace applications. For sheet, strip, tubing, extrusions, and molded shapes, use the AMS3786 specification, which is
-
Supplier: CinchSeal
Description: The 9700 split seal is machined out of stainless steel and all internal parts meet USDA standards for indirect food contact. These stainless steel split mechanical seals are recommended for all other industries such as food and cheese processing, spices and flavorings,
- Seal Construction: Metal Cased (Single)
- Sealing Element or Lip Material: Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Sealing Orientation and Direction: Axial Seal
-
Supplier: CinchSeal
Description: . Standard Features Zero Maintenance due to unique self adjusting design Manufactured out of 316 Stainless Steel to handle caustic wash downs Consumes 30% less power than rope packing Will not damage or undercut shafts tops product loss and premature bearing failure Seals dust and
- Operating Temperature: -50 to 400 F
- Seal Construction: Metal Cased (Single)
- Sealing Element or Lip Material: Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Sealing Orientation and Direction: Axial Seal
-
Supplier: SKF/Global
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 2.56 inch
- Housing Bore Diameter or Seal O.D.: 87.36 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 1.18 inch
-
Supplier: SKF/Global
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 0.9800 inch
- Housing Bore Diameter or Seal O.D.: 75.98 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 0.5900 inch
-
Supplier: SKF/Global
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 0.4100 inch
- Housing Bore Diameter or Seal O.D.: 72.05 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 0.2600 inch
-
Supplier: SKF/Global
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is
- Axial Cross Section or Thickness: 3.94 inch
- Housing Bore Diameter or Seal O.D.: 90.15 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 0.7870 inch
-
Supplier: CT Gasket & Polymer Co., Inc.
Description: CTG Inc. manufactures PTFE and elastomeric spring energized seals and sealing systems. Spring Energized Seals can be used in static, reciprocating and slow to medium rotary applications. Unlike many other seals where you must size your seal application around
- Operating Temperature: -400 to 550 F
- Seal Type: Oil / Grease Seal, Hydraulic / Pneumatic Seal
- Sealing Element or Lip Material: Polyetheretherketone (PEEK), Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Shaft O.D. or Seal I.D.: 0.1250 to 9.5 inch
-
Supplier: Shenzhen Dechengwang Technology Co., Ltd
Description: provides solutions for even the most demanding application requirements. Why Order PTFE Teflon® Seals from Us? Have you tried standard seal profiles and found that they aren't quite right? Or are you tried with the standard seals? In Dechengwang, We can adapt
- Gasket Type: Sheet / Die-cut, Custom Gasket, Other
- Material: Polytetrafluoroethylene (PTFE, Teflon®, etc.)
-
Supplier: Shenzhen Dechengwang Technology Co., Ltd
Description: provides solutions for even the most demanding application requirements. Why Order PTFE Teflon® Seals from Us? Have you tried standard seal profiles and found that they aren't quite right? Or are you tried with the standard seals? In Dechengwang, We can adapt
- Industry: Medical / Food (FDA, USDA)
- Material Type / Grade: Biocompatible
- Polymer Matrix Type: Fluoropolymer (PTFE / PVDF)
- Reinforcement / Filler Material: Aramid Fiber, Carbon / Graphite, Fiber Glass, Metal
-
Supplier: KC Seals, Inc.
Description: than Vee Packings, V-Cups, or Piston Cups. The result is a compact, efficient and less costly overall component that fits easily into standard O-Ring grooves. Our styles range from Rod T-Seals, Piston T-seals, Capped T-Seals, and Locking T-Seals. K.C. Seals
-
Supplier: Hallite Seals International Ltd.
Description: suitable for diameter ranges of D1. (See Table).MediaThis seal was developed for HFA applications, but can also be used with standard mineral oil fluids.MetricInchOpe rating conditionsHFA FluidsTemperature Range-0C + 60C32F + 140FMaximum Pressure500 bar7500 p.s.i.Operating
- Axial Cross Section or Thickness: 0.3228 to 0.5906 inch
- Housing Bore Diameter or Seal O.D.: 2.83 to 16.54 inch
- Maximum Operating Pressure: 7252 psi
- Operating Temperature: 32 to 140 F
-
Supplier: Accuris
Description: RADIAL LIP OIL SEALS
-
Supplier: Accuris
Description: MINERAL SEAL OIL
-
Supplier: Force Control Industries, Inc.
Description: Low Maintenance – No Adjustment Air Actuated Oil Shear Motor Brakes Perfect for Hazardous Duty Applications The Posistop Motor and Coupler Brakes are designed for long life with minimal maintenance in severe and critical applications. They are typically furnished as spring
- Bore Diameter: 0.6250 to 3.38 inch
- Brake Engagement: Oil Shear
- Brake Operation: Spring Actuation / Engage, Spring Return / Disengage
- Brake Type: Other
-
Supplier: Air Impurities Removal Systems, Inc.
Description: Filter Monitoring Pressure Gauge Drain assembly Features & Benefits Compact design suitable for various mounting configurations. Up to four inlet openings for use with multiple stations. Cabinet is tightly sealed to avoid air bypass
- Airflow: 1500 SCFM
- Collector Type: Source Collector / Portable
Find Suppliers by Category Top
Featured Products Top
-
Leading the way for over 70 years Conax Technologies designs and manufactures more than 600,000 unique versions of compression seal fitting and feedthrough assemblies. Whether it’s a customized solution or a standard product, Conax is your fully (read more)
Browse Sealing Glands Datasheets for Conax Technologies -
Leading the way with innovative ideas for the Oil & Gas and Petrochemical industries For over 70 years, Conax has designed and manufactured (read more)
Browse Temperature Sensors Datasheets for Conax Technologies -
switches from dust, dirt, oil, saltwater, water, bacteria, and moisture. Made in the USA, ZAGO Panel Bushing Seals are Buy American Act, DFARS, REACH and RoHS compliant. They are sleek, user friendly, tough, reusable, and manufactured in malleable, yet extremely resilient gray silicone. With a (read more)
Browse Datasheets for ZAGO Manufacturing Company, Inc. -
Product Spotlight: Crystal Seals PROTECT CIRCUIT BREAKERS AND PANELS FROM CONTAMINANTS WHILE IN HARSH ENVIRONMENTS BENEFITS Made from clear urethane. For (read more)
Browse Switch Sealing Boots Datasheets for ZAGO Manufacturing Company, Inc. -
is superior to other “high deflection” seals available. Due to its unique stress-distributing design, the Lever Seal can handle three times the flange movement of a single-ply standard (read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
pressure boundary can be sealed using one of our compression seal fitting styles. Conax Technologies’ BSWS assemblies were originally designed for use with embedded bearing temperature sensors to prevent oil migrating along the sensor leads. They seal on the individual insulated leads (read more)
Browse Predictive Maintenance and Condition Monitoring Systems Datasheets for Conax Technologies -
website to learn about all of our standard and customized fittings and feedthroughs. PG series seal fittings PG (read more)
Browse Sealing Glands Datasheets for Conax Technologies -
Leading the way with innovative ideas for the Oil & Gas and Petrochemical industries For over 70 years, Conax has designed and manufactured (read more)
Browse Cable Glands Datasheets for Conax Technologies -
Save time and money in costly repairs/ replacement parts caused by contaminants (i.e.: dirt, water, oil, fluids, gas,) infiltrating or seeping out of equipment. ZAGO socket cap seal screws are reusable, too. INHERENTLY GREEN: Made from corrosion-resistant metals (read more)
Browse Screws Datasheets for ZAGO Manufacturing Company, Inc. -
tapered roller bearing or deep groove ball bearings to handle this combination of radial and thrust loads. This bearing system is more effective at supporting axial loads than needle rollers found in standard cam followers. Special seals are used in (read more)
Browse Roller Bearings Datasheets for Accurate Bushing Company, Inc.
Conduct Research Top
-
VICTREX (R) PEEK Meets NORSOK M710 Compliance and Continues to Aggressively Test its Polymers in Support of Industry-Leading Test Standards
Geoff Small, Victrex Technical Program Manager. The use of elastomeric seals and thermoplastic back up. rings is commonplace in the oil and gas industry with. ever increasing levels of ingenuity and sophistication. in their design and application. At the core of these. critical components
-
Sealing Low-Compressive Loads with Multi-Swell TM Style 3760
When you can't get an effective seal because the compressive load on a gasket is too low, or because the flanges aren't rigid enough to compress standard gasketing material in the areas between bolts, Web Seal recommends the new Multi-Swell Style 3760 gasketing material from Garlock. Multi-Swell TM
-
EETimes.com | Electronics Industry News for EEs & Engineering Managers
LightLogic rolls out new transponders SANTA CLARA, Calif. -- LightLogic Inc. here today announced that it has begun shipping a new line of transponders for 10-Gbits (OC-192) applications. Compatible with the first-generation, 300-pin multi-source agreement (MSA) standard, the TRN4035A family
-
CABINET COOLERS END COSTLY SHUTDOWNS
choice for Lasercraft. It was easy to install, compact in size, readily available, maintenance free, quiet, reliable and inexpensive. It took Lasercraft only a few minutes to install the Cabinet Cooler through a standard conduit knock-out punch on top of their cabinet. Since EXAIR's Cabinet Cooler has
More Information Top
-
Surface preparation for the LDH test
pears that the low viscosity mineral seal oil ( standard technique) offers the best compromise.
-
Forensic Identification of Seal Oils Using Lipid Profiles and Statistical Models
As many of the sam- ples are not authentic forensic standards, it will be important to continue this research with appropriate fish and seal oil stan- dards .
-
Machine Tools Handbook: Design and Operation > MACHINE TOOL ELEMENTS
Standard oil seals .
-
Thermoplastic elastomeric blend of nitrile rubber and poly(styrene‐co‐acrylonitrile). II. Replacement of nitrile rubber by its vulcanizate powder
The nitrile rubber vulcanizate powder (w-NBR) was prepared in the laboratory from a precursor vulcani- zate sheet based on standard oil seal formulation: NBR (ACN content, 34%), 100; carbon black N770, 50; dioc- tyl phthalate, 5; zinc oxide, 5; stearic acid …
-
Cost Effective Methods to Maintain Gas Production by the Reduction of Fouling in Centrifugal Compressors
The compressors installed on the Es- mond complex are manufactured by Nuovo Pignone and are of a barrel type, with standard oil seals .
-
A small masticator for rubber plasticization
Standard oil seals are fitted above and below the oil bath. Drive.
-
The Angular Distribution of Long-Range Alpha-Particles from the Bombardment of Boron-11 by Protons
Two proportional counters,to detect the alpha-particles, were mounted on arms which could be rotated (using standard oil seals and Gaco rings) about an axis through the centre of the tank, Kovar-glass seals were used to bring in the counter …
-
Seal And Gasket Selling Leads in Valves, Seal And Gasket Exporters, Manufacturers & Suppliers in Valves Directory
[ Related Keywords : valve oil seal, oil seal , standard valve oil seal, seal ] .
-
Passive cable accumulator for the deep seafloor ROV, RUM III
The oil seals were standard lip seals: but under maximum load on the pulleys the Delrin compressed enough t.hat. it would distort the seal and allow some leakage of oil.
-
Gearbox Repair and Application Review
Standard rubber oil seals : 212ºF .