Take-up Bearing Take-up Bearings
from RS Components, Ltd.
Take-up units are used to take up the slackness in conveyor belts. A nut is inserted into the slot and a bolt through the casting to adjust the belt tension. Made from cast iron to BS1452. Spherical bearing insert accommodates initial misalignment. Nitrile/fabric seals. Material = Cast Iron. Inside... [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.97
- Design Units: Metric
- Bearing Material: Iron
from RS Components, Ltd.
Take-up units are often used to take up any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly. Material = Cast Iron. Inside Diameter = 20mm. Length = 94mm. Width = 89mm. [See More]
- Component: Take-up Bearing
- Bore Diameter: 0.7874
- Design Units: Metric
- Bearing Material: Iron
from RS Components, Ltd.
Take-up units are often used to take up any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly. Material = Cast Iron. Inside Diameter = 25mm. Length = 97mm. Width = 89mm. [See More]
- Component: Take-up Bearing
- Bore Diameter: 0.9843
- Design Units: Metric
- Bearing Material: Iron
from RS Components, Ltd.
Take-up units are often used to take up any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly. Material = Cast Iron. Inside Diameter = 30mm. Length = 113mm. Width = 102mm. [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.18
- Design Units: Metric
- Bearing Material: Iron
from RS Components, Ltd.
Take-up units are often used to take up any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly. Material = Cast Iron. Inside Diameter = 35mm. Length = 129mm. Width = 102mm. [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.38
- Design Units: Metric
- Bearing Material: Iron
from RS Components, Ltd.
Take-up units are often used to take up any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly. Material = Cast Iron. Inside Diameter = 40mm. Length = 144mm. Width = 114mm. [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.57
- Design Units: Metric
- Bearing Material: Iron
from RS Components, Ltd.
Take-up units are often used to take up any slackness in conveyor belt systems. A nut is inserted into the slot in the body of the unit, and with a bolt threaded into the nut, drive belt tension can be adjusted accordingly. Material = Cast Iron. Inside Diameter = 60mm. Length = 194mm. Width = 146mm. [See More]
- Component: Take-up Bearing
- Bore Diameter: 2.36
- Design Units: Metric
- Bearing Material: Iron
from KG International FZCO
KG has developed numerous Automotive Bearings for: Wheel Applications. Clutch Releases. Steering Assemblies. Car Air Conditioners. Hub Unit Assemblies. Many type of Bearings have been designed to meet the specific requirements of Automotive industry. They are primarily Angular Contact Ball Bearings,... [See More]
- Component: Take-up Bearing
- Bore Diameter: 0.4724 to 3.94
- Design Units: Metric
from Emerson Bearing Co.
M2000 units, with spherical roller bearings, offer high load capacity while allowing for angular misalignment. Available in expansion and non-expansion styles with triple lip or labyrinth seals. Directly interchangable with SYR and ZA units. [See More]
- Component: Take-up Bearing
- Bearing Features: Lubrication Port
- Bore Diameter: 1.94
from IBT Industrial Solutions
Industrial bearings have been a mainstay of the IBT Industrial Solutions business from the very beginning, when IBT was founded in Kansas City in 1949. With this legacy of service, you can be confident that you are working with the pros when you partner with IBT. Whether you are replacing an... [See More]
- Component: Take-up Bearing
- Bearing Material: Bronze; Plastic
- Bearing Style: Ball / Roller Bearing
- Bearing Features: Corrosion Resistant; Split Bearing
from Timken Company (The)
Available in a wide variety of sizes and configurations, Type E tapered roller bearing take-up units interchange with current suppliers for all key characteristics, including bolt hole and shaft centerline dimensions. Size Ranges. Take-Up Wide Slot: 35 mm through 75 mm (1-3/8 ” through 3... [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
- Bore Diameter: 1.38 to 3.94
from RegalRexnord
3 7/16" Mounted Spherical Roller Bearing, Fixed Cast Iron Take-up Block, Single Setscrew Locking Collar, Clearance Seal [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from Emerson Bearing Co.
Wide slot, medium duty with set screw lock. Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic, and Nickel plating. B-type seals or L3 triple lip seals available for extra sealing needs. Wide inner... [See More]
- Component: Take-up Bearing
- Bearing Features: Lubrication Port
- Bore Diameter: 0.8750
from RegalRexnord
3 7/16" Mounted Spherical Roller Bearing, Fixed Cast Iron Take-up Block, Single Setscrew Locking Collar, Clearance Seal, Closed End Cap [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from Emerson Bearing Co.
Wide slot, standard duty with set screw lock. Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic, and Nickel plating. B-type seals or L3 triple lip seals available for extra sealing needs. Wide... [See More]
- Component: Take-up Bearing
- Bearing Features: Lubrication Port
- Bore Diameter: 0.6250
from RegalRexnord
3 7/16" Mounted Spherical Roller Bearing, Cast Iron Take-up Block, Single Setscrew Locking Collar, Clearance Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 3.44
- Design Units: Inch
- Rated Speed: 1650
from Emerson Bearing Co.
Type E units provide combination of high radial and thrust loads as well as ease of installation and positive locking to the shaft. Factory installed labyrinth seals effectivelly seal against loss of lubricant and admission of dust and dirt. Timken tapered roller bearings are supplied on all units. [See More]
- Component: Take-up Bearing
- Bearing Features: Lubrication Port
- Bore Diameter: 1.75
from RegalRexnord
2" Mounted Ball Bearing, Medium Duty, Cast Iron Wide Slot Take-up Block, Setscrew Locking, Single Lip Viton Contact Seal, Increased C5 clearance, Steel retainers, High temp grease [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
1" Mounted Ball Bearing, Standard Duty, Cast Iron Take-up Block, Setscrew Locking, Single Lip Contact Seal, Bearing Insert Black Oxide Coated [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
1 1/4" Mounted Ball Bearing, Standard Duty, Cast Iron Center Pull Take-up Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.25
- Design Units: Inch
- Rated Speed: 6850
from RegalRexnord
Product Family: Ball Bearing; Line: Link-Belt Mounted [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
1 15/16" Mounted Ball Bearing, Standard Duty, Cast Iron Standard Slot Center Pull Take-up Block, Eccentric Cam Locking Collar, Clearance Seal [See More]
- Component: Take-up Bearing
- Pull Configuration: Center Pull
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
1 5/8" Mounted Spherical Roller Bearing, Fixed Cast Iron 2-Bolt Take Up Block, Single Setscrew Locking Collar, Clearance Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.62
- Design Units: Inch
- Rated Speed: 3100
from RegalRexnord
2 1/2" Mounted Spherical Roller Bearing, Fixed Cast Iron Take Up Block, Single Setscrew Locking Collar, Clearance Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 2.5
- Design Units: Inch
- Rated Speed: 2300
from RegalRexnord
2 11/16" Mounted Spherical Roller Bearing, Fixed Cast Iron 2-Bolt Take Up Block, adapter mounted, Triple Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 2.69
- Design Units: Inch
- Rated Speed: 850
from RegalRexnord
1 15/16" Mounted Ball Bearing, Standard Duty, Cast Iron Protected Screw Take-up Block, Eccentric Cam Locking Collar, Triple Lip Contact Seal [See More]
- Component: Take-up Bearing
- Frame Features: Protected Screw
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
2 3/16" Mounted Ball Bearing, Standard Duty, Cast Iron Wide Slot Take-up Block, Centrik-Lok CL Locking Device, Single Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
1 7/16" Mounted Ball Bearing, Intermediate Duty, Cast Iron Wide Slot Center Pull Take-up Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.44
- Design Units: Inch
- Rated Speed: 4800
from RegalRexnord
1 15/16" Mounted Ball Bearing, Intermediate Duty, Cast Iron Wide Slot Take-up Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.94
- Design Units: Inch
- Rated Speed: 3600
from RegalRexnord
1 7/16" Mounted Ball Bearing, Standard Duty, Cast Iron Wide Slot Center Pull Take-up Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 1.44
- Design Units: Inch
- Rated Speed: 6850
from RegalRexnord
2 3/16" Mounted Ball Bearing, Standard Duty, Cast Iron Take-up Block, Eccentric Cam Locking Collar, Single Lip Contact Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 2.19
- Design Units: Inch
- Rated Speed: 4360
from RegalRexnord
2 15/16" Mounted Ball Bearing, Heavy Duty, Cast Iron Take-up Block, Setscrew Locking, Clearance Seal, Steel Retainers, Hi-Temp Grease, Increased Clearance [See More]
- Component: Take-up Bearing
- Bore Diameter: 2.94
- Design Units: Inch
- Rated Speed: 3700
from RegalRexnord
2 15/16" Mounted Spherical Roller Bearing, Cast Iron Take-up Block, Single Setscrew Locking Collar, Clearance Seal [See More]
- Component: Take-up Bearing
- Bore Diameter: 2.94
- Design Units: Inch
- Rated Speed: 2800
from RegalRexnord
3 15/16" Mounted Spherical Roller Bearing, Fixed Cast Iron Take-up Block, Single Setscrew Locking Collar, Triple Lip Contact Seal, Two Open Auxiliary Caps [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
4 7/16" Mounted Spherical Roller Bearing, Ductile Iron Take-up Block, Double Setscrew Locking Collar, Triple Lip Contact Seal, Food Grade Grease [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
2 3/16" Mounted Spherical Roller Bearing, Fixed Cast Iron Take-up Block, Single Setscrew Locking Collar, Single Lip Light Contact Seal [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing
from RegalRexnord
Product Family: Roller Bearing; Line: Rex [See More]
- Component: Take-up Bearing
- Bearing Style: Ball / Roller Bearing