60° Countersinks
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . SEV-00275 [See More]
- Standard Angle: 60°
- Body Diameter: 0.500
- Special Angle: 60
- Shank Diameter: 0.375
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from premium submicron grain carbide. Also available in HSS. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from Cutting Edge Technologies, Inc.
Diameter: 3/64". Overall Length: 1 1/2". Shank Diameter: 1/8". Type: Drill & Countersink [See More]
- Standard Angle: 60°
- Body Diameter: 0.047
- Units: Fractional
- Shank Diameter: 0.125
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.250 to 1.000
- Units: Fractional
- Shank Diameter: 0.250 to 0.500
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . SEV-02372 [See More]
- Standard Angle: 60°
- Body Diameter: 0.250
- Special Angle: 60
- Shank Diameter: 0.188
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from premium submicron grain carbide. Also available in HSS. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.250 to 1.000
- Units: Fractional
- Shank Diameter: 0.250 to 0.500
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . SEV-02525 [See More]
- Standard Angle: 60°
- Body Diameter: 0.500
- Special Angle: 60
- Shank Diameter: 0.375
from Melin Tool Company
Use on CNC and preset machines. Tight dimensions on length and angle insure setting accuracy and repeatability. Made from premium submicron grain carbide. Also available in HSS. Pre-setting information available in Technical Data section. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.188 to 1.000
- Units: Fractional
- Shank Diameter: 0.188 to 0.500
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 3.000
- Units: Fractional
- Shank Diameter: 0.125 to 1.000
from Reid Supply
Combination drills and countersinks are short, double-ended drills used to produce a shallow conical or center hole, typically on the end of workpiece to be held between centers before turning in a lathe or cylindrical grinding. . 1121463 [See More]
- Standard Angle: 60°
- Body Diameter: 0.125
- Special Angle: 60
- OAL: 3.50
from Melin Tool Company
For centering and spot drilling applications when high accuracy is necessary. 60 ° included angle. Use carbide for highly abrasive or tough materials in production runs. [See More]
- Standard Angle: 60°
- Body Diameter: 0.025 to 0.312
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 1.000
- Units: Fractional
- OAL: 1.25 to 3.75
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Drill and countersink with one tool. Can save setup and production time by combining two operations into one. Made from premium submicron grain carbide. Also available in HSS. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- OAL: 1.25 to 3.50
from Melin Tool Company
For highly abrasive and hard to machine materials. For production applications in cast iron, alloy steel, or glass reinforced plastics. Carbide eliminates the high cost of tool changes in production situations. Rigid set up is a must - not suited for hand held applications. Tools 3/8 ” and... [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 120°
- Body Diameter: 0.125 to 1.000
- Units: Fractional
- Shank Diameter: 0.125 to 0.500
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- OAL: 1.25 to 3.50
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from premium submicron grain carbide. Also available in HSS. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- OAL: 1.50 to 4.00
from Melin Tool Company
2 + 2 staggered fute design for smooth, chatter-free cutting. Abundant chip clearance to work well in non-ferrous applications such as aluminum and plastic. Made from HSS material. Also available in solid carbide. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 120°
- Body Diameter: 0.125 to 3.000
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- OAL: 0.75 to 3.00
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from HSS. Also available in solid carbide. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- OAL: 0.75 to 3.00
from Melin Tool Company
Flutes are staggered to ensure smoother, chatter-free cutting action. Black oxide surface treatment enhances tool life and prevents galling. Made from HSS material. Also available in M42 8% cobalt and solid carbide. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 3.000
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°; 82°; 90°
- Body Diameter: 0.125 to 0.438
- Units: Fractional
- OAL: 1.25 to 2.75
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from HSS. Also available in solid carbide. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.125 to 0.750
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.375 to 0.500
- Units: Fractional
- OAL: 3.00 to 3.50
from Melin Tool Company
Use on CNC and preset machines. Tight dimensions on length and angle insure setting accuracy and repeatability. Pre-setting information available in Technical Data section. Made from HSS. Also available in solid carbide. [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.188 to 1.000
- Units: Fractional
- Shank Diameter: 0.188 to 0.500
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.124 to 1.240
- Units: Metric
- OAL: 0.98 to 4.92
from Melin Tool Company
Used for countersinking holes for centers or enlarging existing holes. Radial relief on the angle contributes to smooth, chatter-free operation. [See More]
- Standard Angle: 60°; 82°; 90°; 100°
- Body Diameter: 0.250 to 2.000
- Units: Fractional
- Shank Diameter: 0.250 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°
- Body Diameter: 0.157 to 1.240
- Units: Metric
- OAL: 1.40 to 4.92
from Melin Tool Company
For centering and spot drilling applications when high accuracy is necessary. 60 ° included angle. Made from HSS. Also available in solid carbide. [See More]
- Standard Angle: 60°
- Body Diameter: 0.025 to 0.312
- Units: Fractional
- Shank Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Body Diameter: 0.250 to 1.000
- Units: Fractional
- Shank Diameter: 0.250 to 0.500