High Speed Steel Countersinks
from RS Components, Ltd.
845/8 1-FLUTE COUNTERSINK BITS SET [See More]
- Material: High Speed Steel; Hss
- Standard Angle: 90°
from RS Components, Ltd.
Dormer G10710.4 Drill Bit [See More]
- Material: High Speed Steel; Hss-e
- Shank Diameter: 0.250
- Standard Angle: 90°
- OAL: 1.97
from RS Components, Ltd.
Dormer G10712.4 Drill Bit [See More]
- Material: High Speed Steel; Hss-e
- Shank Diameter: 0.250
- Standard Angle: 90°
- OAL: 1.97
from RS Components, Ltd.
Dormer G1068.3 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.236
- Standard Angle: 90°
- OAL: 1.97
from RS Components, Ltd.
Dormer G10610.4 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.236
- Standard Angle: 90°
- OAL: 1.97
from RS Components, Ltd.
Dormer G10616.5 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.394
- Standard Angle: 90°
- OAL: 2.36
from RS Components, Ltd.
Noga BC 1040 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.126
- Standard Angle: 90°
- Flutes: 1
from RS Components, Ltd.
RS PRO T52000205T Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.236
- Standard Angle: 90°
- OAL: 1.77
from RS Components, Ltd.
RS PRO T52000510T Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.315
- Standard Angle: 90°
- OAL: 1.89
from RS Components, Ltd.
RS PRO T52001015T Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.394
- Standard Angle: 90°
- OAL: 2.56
from RS Components, Ltd.
Tin Coated 4 piece set [See More]
- Material: High Speed Steel; Hss
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T52000205 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.236
- Standard Angle: 90°
- OAL: 1.77
from RS Components, Ltd.
RS PRO T52000510 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.315
- Standard Angle: 90°
- OAL: 1.89
from RS Components, Ltd.
4 piece deburr set [See More]
- Material: High Speed Steel; Hss
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51000605 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Shank Diameter: 0.197
- Standard Angle: 90°
- OAL: 1.77
from RS Components, Ltd.
6 pce c/sink set 3 flute [See More]
- Material: High Speed Steel; Hss
- Flutes: 3
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51002005 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 5
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51001605 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 5
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51001205 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 5
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51000805 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 5
- Standard Angle: 90°
from RS Components, Ltd.
6 pce 5 flute c/sink set [See More]
- Material: High Speed Steel; Hss
- Flutes: 5
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51002503 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 3
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51002003 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 3
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51001603 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 3
- Standard Angle: 90°
from RS Components, Ltd.
RS PRO T51001203 Drill Bit [See More]
- Material: High Speed Steel; Hss
- Flutes: 3
- Standard Angle: 90°
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . KEO-53108 [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 82
- Standard Angle: 82°
- Body Diameter: 1.000
from Walter Surface Technologies
Made of M2 HSS. Their 82 ° point angle is ideal for countersinking and they can also be used for deburring and chamfering in steel, stainless steel and non-ferrous metals. Features. Countersinks sizes marked on inside panel. Resistant plastic case. VP M2 HSS Countersinks. Applications. All... [See More]
- Material: High Speed Steel
- Body Diameter: 0.250 to 1.000
- Standard Angle: 82°
- Shank Diameter: 0.250 to 0.500
from Melin Tool Company
2 + 2 staggered fute design for smooth, chatter-free cutting. Abundant chip clearance to work well in non-ferrous applications such as aluminum and plastic. Made from HSS material. Also available in solid carbide. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°; 100°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 3.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.250 to 1.000
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . SEV-00275 [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 60
- Standard Angle: 60°
- Body Diameter: 0.500
from Walter Surface Technologies
Made of M2 HSS. Their 82 ° point angle is ideal for countersinking and they can also be used for deburring and chamfering in steel, stainless steel and non-ferrous metals. Features. Special surface treatment. Special tip geometry. Variable pitch design. Applications. For countersinking. For... [See More]
- Material: High Speed Steel
- Standard Angle: 82°
- Units: Fractional
- Body Diameter: 0.250 to 1.000
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from HSS. Also available in solid carbide. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60° (optional feature); 82° (optional feature); 90° (optional feature); 100° (optional feature); 110° (optional feature); 120° (optional feature)
- Units: Fractional
- Body Diameter: 0.250 to 2.000
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . SEV-01501 [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 90
- Standard Angle: 90°
- Body Diameter: 0.375
from Melin Tool Company
Flutes are staggered to ensure smoother, chatter-free cutting action. Black oxide surface treatment enhances tool life and prevents galling. Made from HSS material. Also available in M42 8% cobalt and solid carbide. [See More]
- Material: High Speed Steel; Carbide; M42 8% Cobalt
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 3.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.250 to 1.000
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . SEV-02372 [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 60
- Standard Angle: 60°
- Body Diameter: 0.250
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from HSS. Also available in solid carbide. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.125 to 3.000
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . WEL-CS-10-1 [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 82
- Standard Angle: 82°
- Shank Diameter: 0.375
from Melin Tool Company
Use on CNC and preset machines. Tight dimensions on length and angle insure setting accuracy and repeatability. Pre-setting information available in Technical Data section. Made from HSS. Also available in solid carbide. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.188 to 1.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.125 to 1.000
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . WEL-CS-10S [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 82
- Standard Angle: 82°
- Shank Diameter: 0.250
from Melin Tool Company
For centering and spot drilling applications when high accuracy is necessary. 60 ° included angle. Made from HSS. Also available in solid carbide. [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.025 to 0.312
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from Reid Supply
Countersinks expand the top of an existing hole in a workpiece to allow countersinking screws to install flush with the surface of the workpiece. This helps prevent the workpiece material from swelling when a screw is inserted and tightened down. . WEL-CS-3S [See More]
- Material: High Speed Steel; High-Speed Steel
- Special Angle: 82
- Standard Angle: 82°
- Body Diameter: 0.250
from Melin Tool Company
Drill and countersink with one tool. A thin web drill point is blended into 2 futes of a 4 fute countersink to spot drill and countersink in one operation. Can save setup and production time by combining two operations into one. [See More]
- Material: High Speed Steel
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 1.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from Reid Supply
Combination drills and countersinks are short, double-ended drills used to produce a shallow conical or center hole, typically on the end of workpiece to be held between centers before turning in a lathe or cylindrical grinding. . 1121463 [See More]
- Material: High Speed Steel; Steel
- Special Angle: 60
- Standard Angle: 60°
- Body Diameter: 0.125
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Drill and countersink with one tool. A thin web drill point is blended into 2 futes of a 4 fute countersink to spot drill and countersink in one operation. Made from HSS. Also available in solid carbide. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Body Diameter: 0.375 to 0.500
- Units: Fractional
- OAL: 3.00 to 3.50
from Melin Tool Company
Extended length for hard to reach applications. Made from HSS. [See More]
- Material: High Speed Steel
- Standard Angle: 82°
- Units: Fractional
- Body Diameter: 0.125 to 1.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60° (optional feature); 82° (optional feature); 90° (optional feature)
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from Melin Tool Company
Made with radial clearance and have added shank length for use in turret lathes and for screw machine work. Made from HSS. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°
- Units: Fractional
- Body Diameter: 0.500 to 1.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60° (optional feature); 82° (optional feature); 90° (optional feature)
- Units: Fractional
- Body Diameter: 0.125 to 1.000
from Melin Tool Company
Radial relief ensures smooth, chatter-free cutting without overfeeding and makes the tool self-centering. Black oxide surface treatment enhances tool life and prevents galling. Excellent countersink for use in hand held applications. Made from HSS. Also available in M42 8% cobalt and solid carbide. [See More]
- Material: High Speed Steel; Carbide; M42 8% Cobalt
- Standard Angle: 60°; 82°; 90°; 100°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 3.000
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Body Diameter: 0.125 to 1.000
- Units: Fractional
- OAL: 1.25 to 3.75
from Melin Tool Company
2 cutting edges give you twice the tool life of a single end tool. Made from HSS. Also available in solid carbide. [See More]
- Material: High Speed Steel; Carbide
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from Melin Tool Company
Designed with a radial relieved single edge for fast removal without chatter. Made from HSS material. Also available in M42 8% cobalt. 3/16 ” and 1/4 ” are double end. [See More]
- Material: High Speed Steel; M42 8% Cobalt
- Standard Angle: 82°
- Units: Fractional
- Body Diameter: 0.188 to 1.500
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Fractional
- Body Diameter: 0.125 to 0.750
from Melin Tool Company
Designed with a radial relieved single edge for fast removal without chatter. Higher heat and abrasion resistance for use on high-tensile alloys, stainless steel, and other hard to machine abrasive materials. Made from M42 8% cobalt material. Also available in HSS. [See More]
- Material: High Speed Steel; M42 8% Cobalt
- Standard Angle: 60°; 82°; 90°
- Units: Fractional
- Body Diameter: 0.250 to 1.125
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°; 82°; 90°
- Units: Fractional
- Body Diameter: 0.125 to 0.438
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Metric
- Body Diameter: 0.124 to 1.240
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°
- Units: Metric
- Body Diameter: 0.157 to 1.240
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Body Diameter: 0.124 to 1.240
- Units: Metric
- OAL: 0.98 to 4.92
from KEO Cutters
Additional coatings available contact supplier for more information [See More]
- Material: High Speed Steel
- Standard Angle: 60°; 82°; 90°; 100°; 110°; 120°
- Units: Fractional
- Body Diameter: 0.250 to 1.000