Tee Rosette Strain Gauges
from Hottinger Bruel and Kjaer UK Ltd.
Strain gage series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. 50 mm fluoropolymer-insulated wires. +TPE ribbon cable attached. Contents per package: 5 pcs. [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0236
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0394
from DigiKey
CEA-00-062UTA-350 - STRAIN GAGES [See More]
- Arrangement: Tee
- Operating Temperature: -103 to 347
from Hottinger Bruel and Kjaer UK Ltd.
Strain gage series Y. (Universal SG for stress analysis). Geometry: shear/torsion half bridge. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset +/- 45 ° to the axis,. connected in a half bridge circuit. Measuring grid covered. 50 mm fluoropolymer-insulated wires. [See More]
- Arrangement: Tee; T rosette
- Integral Bridge Circuitry: Half-Bridge
- Specialty Application: Stress Analysis / structural testing
- Grid Length: 0.1181
from DigiKey
CEA-00-250UTA-10C - STRAIN GAGES [See More]
- Arrangement: Tee
- Operating Temperature: -103 to 347
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Solder tabs with strain relief. Temp. response: aluminum (23 ppm/K). Nominal resistance: 350... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.2362
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.2362
from DigiKey
CEA-05-125UTA-350 - STRAIN GAGES [See More]
- Arrangement: Tee
- Operating Temperature: -103 to 347
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Leads. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance: 350 ohms. Measuring grid... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.2362
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.2480
from DigiKey
Strain Gauge [See More]
- Arrangement: Tee
- Operating Temperature: -100 to 350
from Hottinger Bruel and Kjaer UK Ltd.
Strain gage series A. (Strain gage for Transducers). Geometry: half bridge circuit. Measuring grid material: constantan. Carrier foil: PEEKF. 2 measuring grids. Measuring grid covered. Integrated solder tabs. Temp. resp.: ferr. steel (10.8 ppm/K). Creep adjustment: K (eq. to u = 6s). Nominal... [See More]
- Arrangement: Tee; T rosette
- Integral Bridge Circuitry: Half-Bridge
- Specialty Application: Manufacturing transducers
- Grid Length: 0.0945
from DigiKey
EA-05-062TZA-350/E - STRAIN GAGE [See More]
- Arrangement: Tee
- Operating Temperature: -103 to 347
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Leads. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance: 120 ohms. Measuring grid... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0236
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0433
from DigiKey
STRAIN GAUGE, TRANSDUCER QUALITY [See More]
- Arrangement: Tee
- Operating Temperature: -100 to 200
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Integrated solder tabs. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance: 120... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0236
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0394
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other,. connected in a half bridge circuit. Measuring grid covered. Integrated solder tabs. Temp. response: ferr. steel... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0236
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0315
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series m. (SG with high resistance to alternating loads). Geometry: T rosette. Measuring grid material: Nickel-chrome special allo. Carrier foil: phenolic resin, glass-fiber reinforce. 2 grids, offset 90 ° to each other. Measuring grid covered. Solder tabs with strain relief. [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0591
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0984
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series M. (SG with high resistance to alternating loads). Geometry: T rosette. Measuring grid material: Nickel-chrome special allo. Carrier foil: phenolic resin, glass-fiber reinforce. 2 grids, stacked, offset 90 ° to each other. Measuring grid covered. Solder tabs with strain... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0591
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0984
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Solder tabs with strain relief. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance:... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0591
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0630
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, stacked, offset 90 °. Measuring grid covered. Leads. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance: 120 ohms. Measuring grid... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0591
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0472
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series C. (Extreme temperature [-269 °C to +250 °C]). Geometry: T rosette. Meas. grid material: CrNi special alloy. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Leads. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance:... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0591
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.0591
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge with options series U. (Strain gauge for Transducers). Geometry: T rosette. Measuring grid: Ni-Cr special alloy. Carrier foil: PEEKF. 2 grids, offset 90 ° to each other,. connected in a half bridge circuit. Measuring grid covered. 'Stick-on' (with applied adhesive layer). Temp. [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0630
- Specialty Application: Manufacturing transducers
- Grid Width: 0.1220
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series U. (Strain gauge for Transducers). Geometry: T rosette. Measuring grid: Ni-Cr special alloy. Carrier foil: PEEKF. 2 grids, offset 90 ° to each other,. connected in a half bridge circuit. Measuring grid covered. Integrated solder tabs. Temp. resp.: ferr. steel (10.8 ppm/K). [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0630
- Specialty Application: Manufacturing transducers
- Grid Width: 0.1220
from Hottinger Bruel and Kjaer UK Ltd.
T Rosettes strain gauges of A series coming with two measurement grids measuring two directions of strain (90 ° shift). Typically 2 gauges are interconnected to form the wheatstone bridge to measure tension/compression. Different sizes including miniature designs. Aluminum or steel adapted... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0630
- Specialty Application: Manufacturing transducers
- Grid Width: 0.0787
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge for measurements in bolts. Geometry: T rosette (Half bridge). Measuring grid material: constantan. Carrier foil: special plastic. 2 grids, offset 90 ° to each other. Measurement grid: not covered. Temp. response: ferr. steel (10.8 ppm/K). Resistance: 1000 Ω (+/- 1%). [See More]
- Arrangement: Tee; T rosette
- Integral Bridge Circuitry: Half-Bridge
- Specialty Application: Stress Analysis / structural testing
- Carrier Length: 0.4528
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series A. (Strain gauge for Transducers). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: PEEKF. 2 grids, offset 90 ° to each other. Measuring grid covered. Integrated solder tabs. Temp. resp.: ferr. steel (10.8 ppm/K). Creep adjustment: K (eq. to u = 6s). [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.1181
- Specialty Application: Manufacturing transducers
- Grid Width: 0.1181
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Integrated solder tabs. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance: 120... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.1181
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.1260
from Hottinger Bruel and Kjaer UK Ltd.
Strain gage series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. 50 mm fluoropolymer-insulated wires. Temp. response: ferr. steel (10.8 ppm/K). Nominal... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.1181
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.1299
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge with options series U. (Strain gauge for Transducers). Geometry: columnar. Measuring grid: Ni-Cr special alloy. Carrier foil: PEEKF. 2+1 grids, offset 90 ° to each other. Measuring grid covered. 'Stick-on' (with applied adhesive layer). Temp. resp.: ferr. steel (10.8 ppm/K). Creep... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.0512
- Specialty Application: Manufacturing transducers
- Grid Width: 0.2008
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Leads. Temp. response: titanium/gray cast iron. (9 ppm/K). Nominal resistance: 120 ohms. [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.2362
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.2559
from Hottinger Bruel and Kjaer UK Ltd.
Strain gauge series Y. (Universal SG for stress analysis). Geometry: T rosette. Measuring grid material: constantan. Carrier foil: polyimide. 2 grids, offset 90 ° to each other. Measuring grid covered. Leads. Temp. response: ferr. steel (10.8 ppm/K). Nominal resistance: 350 ohms. Measuring grid... [See More]
- Arrangement: Tee; T rosette
- Strain Sensitive Material: FERT
-
Nominal Resistance: 350
; 350 ohms
from Hottinger Bruel and Kjaer UK Ltd.
Strain gage series S. (Weldable strain gage). Geometry: T rosette. Meas. grid material: NiCr special alloy. Carrier foil: phenolic resin,. glass-fiber reinforced. 2 grids, offset 90 ° to each other. Installed on a carrier plate,. covered with silicone rubber,. for welding onto metallic... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.2362
- Specialty Application: Stress Analysis / structural testing
- Carrier Length: 1.57
from Hottinger Bruel and Kjaer UK Ltd.
Y series strain gauges. Geometry: T rosette. Measuring grid material: Constantan. Carrier foil: Polyimide. 2 measuring grids. Measuring grid covered. 50mm fluoropolymer insulated leads. + 1m TPE-4 conductor cable. Temperature response: ferr. steel (10,8 ppm/K). nominal resistance: 350 Ohm. Measuring... [See More]
- Arrangement: Tee; T rosette
- Grid Length: 0.2362
- Specialty Application: Stress Analysis / structural testing
- Grid Width: 0.2559
from Columbia Research Labs, Inc.
Columbia Series DT 3617 Strain Sensors are designed for the measurements of planar shear strain forces when the axis of principal strain is identified. Each sensor is a complete, compact, easily installed device utilizing the proven technology of the Columbia DTD 2684 Series Fatigue Monitoring... [See More]
- Arrangement: Tee
- Rosette Construction: Planar
- Construction: Electrical Resistance
- Specialty Application: Residual Stress; Measurement of Planar Shear Strain
from OMEGA Engineering, Inc.
OMEGA strain gages are available in a variety of models to cover most strain measurement applications. Their rugged construction and flexibility make them suitable for highly accurate static and dynamic measurements. [See More]
- Arrangement: Tee
- Rosette Construction: Planar
- Construction: Electrical Resistance
- Integral Bridge Circuitry: None
from OMEGA Engineering, Inc.
•. Conveniently Priced per Pack of 5. •. X-Y Pattern for Axial Strain. •. Very Flexible, Mechanically Strong. •. Small Bending Radius. •. Broad Temperature Range. •. Clear Alignment Marks. •. Affix with Cold or Hot Curing Adhesives [See More]
- Arrangement: Tee
- Rosette Construction: Stacked
- Construction: Electrical Resistance
- Integral Bridge Circuitry: None
from OMEGA Engineering, Inc.
OMEGA ® transducer quality strain gages are available in a variety of patterns to cover most transducer design requirements. Their rugged construction, reliability and flexibility make them suitable for highly accurate static and dynamic transducers. The measuring grid is formed by specially... [See More]
- Arrangement: Tee
- Rosette Construction: Planar
- Construction: Electrical Resistance
- Specialty Application: Transducer
from OMEGA Engineering, Inc.
OMEGADYNE ® offers K-Series Tee Rosettes for Axial strain transducer designs. Precision Karma material offers excellent temperature and fatigue characterisitcs. K-Series gages have plated solder pads which make soldering quick and easy. No special solders or fluxes are required. [See More]
- Arrangement: Tee
- Rosette Construction: Planar
- Construction: Electrical Resistance
- Specialty Application: Transducer