-
Supplier: Fairview Microwave Inc.
Description: genders in and out. Fairview Microwave BNC DC block has a 75 Ohm impedance and an inner design. Our 75 Ohm BNC inner DC block is rated for a minimum frequency of DC and a maximum frequency of 2 GHz. SD3458 BNC inner DC block has a maximum insertion
- Connector Type: BNC
- Frequency Range: 0.0 to 2 GHz
- Impedance: 75 Ohm
- VSWR: 1.5 :1
-
Supplier: Visual Sound, Inc.
Description: BTX Technologies, Inc. BNC Terminator, 75 ohm
- Connector Type: BNC
-
Supplier: JFW Industries, Inc.
Description: Model 75S-118 is a 75 Ohm electro-mechanical 1P3T RF switch operating DC-2150 MHz. The 1P3T is normally open and absorptive (i.e. self-terminating). The unused ports will self-terminate at 75 Ohm impedance. Available with 75 Ohm RF connectors:
- Actuator Voltage: 12 volts
- Connector: BNC
- Frequency Range: 0.0 to 2150 MHz
- Impedance: 75 ohms
-
-
Supplier: Visual Sound, Inc.
Description: BTX Technologies, Inc. 75 ohm BNC bulkhead (female-female)
- Connector Type: BNC
-
Supplier: HAVE, Inc.
Description: CLEARANCE ITEM! PRICE GOOD ONLY FOR REMAINING STOCK, AND WHILE SUPPLY LASTS BNC30621 - 75-ohm BNC Terminator.
-
Supplier: Visual Sound, Inc.
Description: BTX Technologies, Inc. Cambridge 75 ohm BNC right angle adapter (m-f)
- Connector Type: BNC
-
Supplier: Visual Sound, Inc.
Description: BTX Technologies, Inc. BNC 75 Ohm Bulkhead Connector, (f-f), Isolated
- Connector Type: BNC
-
Supplier: MilesTek Corporation
Description: 12 PT CRIMPER 75 OHM BNC PIN - 40-15005 This precision tool crimps small diameter 75 Ohm BNC plug center pins. It has 4-way crimping dies, full cycle ratchet, built-in pin locator and comfort grips. 12 indent points per crimp. The 12-point model was
- Connector Type: BNC
-
Supplier: E-Z-HOOK, a division of Tektest, Inc.
Description: The SALE-8709 is a Male BNC Connector with a brass body, fittings and a plated brass contact with a bright tarnish resistant finish for the 75 OHM Double Shielded Video Cable on 7000 series cable.
- Connector Type: BNC
-
Supplier: E-Z-HOOK, a division of Tektest, Inc.
Description: The 8709 is a Male BNC Connector with a brass body, fittings and a plated brass contact with a bright tarnish resistant finish for the 75 OHM Double Shielded Video Cable on 7000 series cable.
- Connector Type: BNC
-
Supplier: MilesTek Corporation
Description: BNC TERMINATOR 75 ohm .5W 1% - PART# 10-02406-010 The BNC Terminator is offered in a 75 Ohm version. Resistance value is .5W 1%. The 75 Ohm type will operate with digital telco and digital video signal transmission. FEATURES: True 75
- Connector Type: BNC
-
Supplier: Gem Electronics
Description: BNC 75 Ohm Jack to Jack Adapter Note: 'TP' at the end of our part number indicates that there will be ten products in the bag -Ten Pack.
- Adapter Style: Straight Jack-Jack
- Adapter Type: Coaxial
- Frequency Range: 0.0 to 4000 MHz
- RF Connector Type: BNC
-
Supplier: Gem Electronics
Description: BNC Resistor Termination Impedance: 75 Ohm Note: 'TP' at the end of our part numbers indicate that there are 10 peices per bag, 'Ten Pack'
- RF Connector Type: BNC
- Resistance: 75 O
-
Supplier: Gem Electronics
Description: BNC 75 Ohm Crimp Crimp Plug FEATURES • Field installable. • One-piece connector construction - no loose contacts or other parts to handle. • Utilizes captive, self-energizing center contact. • Gold plated center contact. • Bright nickel finish solid brass or zinc body. Note:
- Connector Type: BNC
- Frequency Range: 0.0 to 4 GHz
- Gender: Male / Plug
- Geometry: Straight
-
Supplier: Gem Electronics
Description: BNC 75 Ohm Crimp Crimp Plug FEATURES • Field installable. • One-piece connector construction - no loose contacts or other parts to handle. • Utilizes captive, self-energizing center contact. • Gold plated center contact. • Bright nickel finish solid brass or zinc body. Note:
- Connector Type: BNC
- Frequency Range: 0.0 to 4 GHz
- Gender: Male / Plug
- Geometry: Straight
-
Supplier: Fairview Microwave Inc.
Description: specifically ready for quick shipment. This electromechanical RF relay switch is manufactured in a A/B Coaxial design BNC ports. Our coaxial A/B Coaxial electromechanical RF relay switch is rated for a maximum frequency of 1 GHz and a maximum power of 5 Watts (CW). Electromechanical relay RF
- Connector: BNC
- Frequency Range: 0.0 to 1000 MHz
- Impedance: 75 ohms
- Insertion Loss: 0.7000 dB
-
Supplier: Amphenol RF
Description: BNC 75ohm Plug Amphenol is the world leader in the design, manufacture and supply of RF interconnect systems for the automotive, broadband, instrumentation, internet, military/aerospace and wireless infrastructure markets. With the combination of our global footprint and
- Connector Type: BNC
- Gender: Male / Plug
- Geometry: Straight
-
Supplier: Amphenol RF
Description: BNC 75ohm Crimp Plug Amphenol is the world leader in the design, manufacture and supply of RF interconnect systems for the automotive, broadband, instrumentation, internet, military/aerospace and wireless infrastructure markets. With the combination of our global footprint and
- Connector Type: BNC
- Gender: Male / Plug
- Geometry: Straight
-
Supplier: Amphenol RF
Description: BNC 75ohm Crimp Plug Amphenol is the world leader in the design, manufacture and supply of RF interconnect systems for the automotive, broadband, instrumentation, internet, military/aerospace and wireless infrastructure markets. With the combination of our global footprint and
- Connector Type: BNC
- Gender: Female / Jack
- Geometry: Straight
-
Supplier: Amphenol RF
Description: BNC 75ohm Bulkhead Jack Amphenol is the world leader in the design, manufacture and supply of RF interconnect systems for the automotive, broadband, instrumentation, internet, military/aerospace and wireless infrastructure markets. With the combination of our global footprint
- Connector Type: BNC
- Gender: Female / Jack
- Geometry: Straight
-
Supplier: Quiktron, Inc.
Description: A high quality BNC cable for video applications including CCTV, broadcast, studio, boardroom presentations, home theater, etc. Manufactured from 75 Ohm RG59/U dual shield coax cable (60% copper braid over foil) with a 22 AWG copper-covered steel center conductor. Finished with
- Application: RF
- Cable Length: 75 ft
- Connector Type: BNC
-
Cable Assemblies - 75 Ohm BNC Male to 75 Ohm BNC Male Cable 75 Ohm RG-59 Coax in 18 -- FMC0808059-18Supplier: Fairview Microwave Inc.
Description: RF cable assembly part number FMC0808059-18 75 Ohm BNC male to 75 Ohm BNC male cable 75 Ohm RG-59 coax in 18 from Fairview Microwave is one of a huge selection of coaxial cables for radio, antenna and interconnect with RF components. Fairview
- Application: RF
- Cable Length: 1.5 ft
- Connector Type: BNC, Other
-
Supplier: PIC Wire & Cable
Description: PIC Wire & Cable has an extensive line of high quality connectors and contacts for its cable offering, including TNC, BNC, N, HN, C, SMA, ARINC, M39029 and D-Sub. In addition, PIC has many innovative connectors that improve termination, installation, maintenance and reliability. To ensure
- Connector Type: BNC
- Frequency Range: 0.0 to 3 GHz
- Gender: Female / Jack
- Geometry: Straight
-
Supplier: PIC Wire & Cable
Description: PIC Wire & Cable has an extensive line of high quality connectors and contacts for its cable offering, including TNC, BNC, N, HN, C, SMA, ARINC, M39029 and D-Sub. In addition, PIC has many innovative connectors that improve termination, installation, maintenance and reliability. To ensure
- Connector Type: BNC
- Frequency Range: 0.0 to 3 GHz
- Gender: Male / Plug
- Geometry: Straight
-
Supplier: PIC Wire & Cable
Description: PIC Wire & Cable has an extensive line of high quality connectors and contacts for its cable offering, including TNC, BNC, N, HN, C, SMA, ARINC, M39029 and D-Sub. In addition, PIC has many innovative connectors that improve termination, installation, maintenance and reliability. To ensure
- Connector Type: BNC
- Frequency Range: 0.0 to 3 GHz
- Gender: Female / Jack
- Geometry: Straight
-
Supplier: PIC Wire & Cable
Description: PIC Wire & Cable has an extensive line of high quality connectors and contacts for its cable offering, including TNC, BNC, N, HN, C, SMA, ARINC, M39029 and D-Sub. In addition, PIC has many innovative connectors that improve termination, installation, maintenance and reliability. To ensure
- Connector Type: BNC
- Frequency Range: 0.0 to 3 GHz
- Gender: Male / Plug
- Geometry: Right Angle
-
Supplier: Pasternack
Description: PE33399-24 is a BNC male to BNC male cable using RG11 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable
- Application: RF
- Cable Length: 2 ft
- Connector Type: BNC
-
Supplier: Pasternack
Description: PE33405-12 is a BNC male to BNC male cable using PE-B150 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable
- Application: RF
- Cable Length: 1 ft
- Connector Type: BNC
-
Supplier: Pasternack
Description: PE38132/WH-12 is a BNC male to BNC female bulkhead cable using MINI 59 coax. This Pasternack BNC male to BNC female bulkhead cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to
- Application: RF
- Cable Length: 1 ft
- Connector Type: BNC
-
Supplier: Pasternack
Description: PE33197-60 is a BNC male to BNC male cable using RG6 coax. This Pasternack BNC male to BNC male cable assembly uses a 75 Ohm BNC for connector 1 and a 75 Ohm BNC for connector 2. Our male BNC to male BNC cable
- Application: RF
- Cable Length: 5 ft
- Connector Type: BNC
-
Supplier: Fairview Microwave Inc.
Description: / military, etc. which are specifically made ready for quick shipment. Our coaxial radio requency load termination is manufactured in a feed-thru load design with BNC connector. This BNC feed-thru load is a male gender and has no chain. BNC male feed-thru load from Fairview
- Frequency Range: 1000 MHz
- Power Rating: 2 watts
- RF Connector Type: BNC
- Resistance: 75 O
-
Supplier: HUBER+SUHNER AG
Description: HUBER+SUHNER BNC 75 ohm features a two stud bayonet coupling mechanism which is particularly useful for frequently coupled and uncoupled RF connections. At frequencies up to 1 GHz the small impedance deviation is negligible for most applications.
- Connector Type: BNC
- Frequency Range: 1 GHz
-
Supplier: L-com, Inc.
Description: This 75 Ohm BNC T shape auto terminating adaptor features the ability to engage a terminating resistor as soon as a cable is disconnected from any port. This adaptor has a one BNC plug and two BNC jack ports often found in test applications. Features Gold plated
- Connector Type: BNC
-
Supplier: L-com, Inc.
Description: This 1U feed thru rack panels features 16 insulated 75 Ohm BNC female adaptors with non conductive mounting surfaces for isolation from the rack panel. A typical application for a 75 Ohm BNC is video transmission. Panels are made from 16 gauge cold rolled
- Height: 1
- Number of Ports: 16
- Port Type: BNC
-
Supplier: HAVE, Inc.
Description: Our super flexible PROFlex™ Standard Broadcast Video cables are handcrafted with Canare LV61S RG59 cable with matching impedance true 75-ohm BNC connectors. Perfect for all video facility equipment interfacing and video patch cord assemblies. True impedance matched
- Connector Type: BNC
Find Suppliers by Category Top
Featured Products Top
-
JFW model 75P-217 is a 75 Ohm programmable attenuator with attenuation range 0 to 95dB by 1dB steps. It covers the frequency range 5-2150 MHz and is rated for +23 dBm of (read more)
Browse RF Attenuators Datasheets for JFW Industries, Inc. -
RF/Coaxial RF/Coaxial connectors and adapters are available in an extensive selection covering all popular commercial and military RF interfaces from your favorite brands. Formats include MIL-PRF-39012, standard 50 Ohm, 70 Ohm, 75 Ohm and high-power. Applications include (read more)
Browse RF and Microwave Connectors Datasheets for CDM Electronics, Inc. -
Up to 75-ohm performance Quarter turn bayonet-style coupling design includes locking feature Optimized for 12G-SDI broadcast video solutions and CoaXPress standards DC-12 GHz connector frequency range IP67 waterproof panel connector available Quicker (read more)
Browse RF and Microwave Connectors Datasheets for TE Connectivity -
B. Engage multiple pushbuttons simultaneously to achieve combinational attenuation values. This manual attenuator is available with 75 Ohm coaxial RF connectors: BNC female or F female. The attenuator has four mounting holes to allow for panel mounting. JFW Model #: 75B-002 (read more)
Browse RF Attenuators Datasheets for JFW Industries, Inc. -
The QUADconnector™ has 4 hermetically-sealed Coaxial/Triaxial connections through ONE circular hole in the bulkhead, available in TNC and BNC 50 ohm, and BNC 75 ohm types. TCAS/Mode S installations can use three panel holes instead of as many as twelve saving space, time (read more)
Browse Coaxial Connectors Datasheets for PIC Wire & Cable -
The JFW model 75S-243 is a 1P16T self-terminating RF switch. This RF switch covers DC-1000MHz and comes with either BNC female or precision F female RF connectors. Its simple TTL control makes it ideal for routing CATV signals or for use in constructing a 75 Ohm matrix switch. (read more)
Browse RF Switches Datasheets for JFW Industries, Inc. -
frequency broadcast applications today, such as 75 Ohm video. It is standardized according to IEC 60169-8. • Mini-BNC – The Mini BNC connector is a mini version of the standard BNC connector. It was developed for space savings, taking (read more)
Browse RF and Microwave Connectors Datasheets for PIC Wire & Cable -
up to about 7.5 GHz and 820 W. In addition to connectors, different types of coax options also exist. RG58 is used for low-power signals up to about 1 GHz, and it is often used with BNC and other connectors. RG142 is a double-shielded, 50-ohm impedance cable with an upper frequency range of (read more)
Browse Coaxial Cables and Triaxial Cables Datasheets for A.H. Systems Inc.