-
Supplier: MOK Optics Co., Ltd.
Description: -optics and photography. We can cut customized dimension according to custom's requirements. Most of filters are available in stock. Welcome to check the stock status with us if you have the request for filters. Narrow bandpass filter, BP610CWL: 610nm ±3nm
- Filter Type: Bandpass / Interference Filters
- Rejection Range: 350 to 1100 nm
- Transmission Range: 850 nm
-
Supplier: Anatech Electronics, Inc.
Description: 850 MHz LC Bandpass Filter
- Bandwidth: 50000 kHz
- Connector Type: Other
- Filter Type: Bandpass
- Frequency (Fc): 850 MHz
-
Supplier: Alluxa, Inc.
Description: Bandpass filter with a 850 nm (± 3.0 nm) center wavelength (CWL), a 25 nm (± 3.0 nm) full-width at half-maximum (FWHM), greater than 90% transmission, and wide-range OD4 out-of-band blocking from 200 nm to 1200 nm. It is hard-coated on a
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Shape: Circular
- Filter Type: Bandpass / Interference Filters
- Thickness: 3.3 mm
-
-
Supplier: Changchun Yutai Optics Co., Ltd.
Description: convenience, many of our filters are also available in kits. Yutai Optics can achieve Blocking OD6 filters for some fluorescence system. Narrow Bandpass Filters with CWL 450nm/670nm/720nm/89 0nm/905nm/1064nm, FWHM 8-30nm
- Application: Infrared (IR), Visible (VIS), Ultra-Violet (UV)
- Filter Surface Quality: 60-40 Scratch / Dig, 80-50 Scratch / Dig
- Thickness: 0.5000 to 6 mm
-
Supplier: Knight Optical (UK) Ltd
Description: Knight Optical offers these carefully designed NIR bandpass filters for use in ANPR/ALPR camera applications. Designed specifically to work at maximum efficiency transmitting over 90% at the commonly used LED wavelengths of 740nm, 850nm 870nm or
- Diameter, Square Side, or Rectangular Length: 0.0 mm
- Filter Shape: Circular
- Filter Surface Quality: 60-40 Scratch / Dig
- Minimum Peak Transmittance: 90 (%)
-
Supplier: Knight Optical (UK) Ltd
Description: These interference band-pass filters are used to isolate and transmit a specified narrow wavelength and reflect all other incident wavelengths. Knight Optical's stock range of high quality standard bandwidth visible type interference filters is available from
- Filter Bandpass: 10 nm
- Filter Surface Quality: 80-50 Scratch / Dig
- Minimum Peak Transmittance: 45 (%)
- Thickness: 6.1 mm
-
Supplier: Knight Optical (UK) Ltd
Description: These interference band-pass filters are used to isolate and transmit a specified narrow wavelength and reflect all other incident wavelengths. Knight Optical's stock range of high quality standard bandwidth visible type interference filters is available from
- Filter Bandpass: 10 nm
- Filter Surface Quality: 80-50 Scratch / Dig
- Minimum Peak Transmittance: 45 (%)
- Thickness: 6.1 mm
-
Supplier: Edmund Optics Inc.
Description: Ideal for Life Science Instrumentation High Transmission, Deep Blocking Used to Prevent Photobleaching in Microscopy Applications 10nm and 50nm Bandpass Interference Filters also Available TECHSPEC Hard Coated 25nm Bandpass Interference Filters are
- Center Wavelength: 850 nm
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Bandpass: 25 nm
- Filter Shape: Circular
-
Supplier: Edmund Optics Inc.
Description: Ideal for Life Science Instrumentation High Transmission, Deep Blocking Used to Prevent Photobleaching in Microscopy Applications 10nm and 50nm Bandpass Interference Filters also Available TECHSPEC Hard Coated 25nm Bandpass Interference Filters are
- Center Wavelength: 850 nm
- Diameter, Square Side, or Rectangular Length: 50 mm
- Filter Bandpass: 25 nm
- Filter Shape: Circular
-
Supplier: Edmund Optics Inc.
Description: Ideal for Life Science Instrumentation High Transmission, Deep Blocking Used to Prevent Photobleaching in Microscopy Applications 10nm and 50nm Bandpass Interference Filters also Available TECHSPEC Hard Coated 25nm Bandpass Interference Filters are
- Center Wavelength: 850 nm
- Diameter, Square Side, or Rectangular Length: 12.5 mm
- Filter Bandpass: 25 nm
- Filter Shape: Circular
-
Supplier: Andover Corporation
Description: -coated and high-transmitting versions. Still can't find what you're looking for? Check our surplus listings for more options. Note: For wavelengths above 1665nm, please see our IR Bandpass Filter section. Show More Information General Specifications for Standard Bandpass
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Surface Quality: Other
- Filter Type: Bandpass / Interference Filters
- Thickness: 6.9 mm
-
Supplier: Knight Optical (UK) Ltd
Description: Knight Optical's broadband and extra broadband range of interference band-pass filters are used to isolate and transmit a specified narrow wavelength and reflect all other incident wavelengths. Our stock range of high quality visible and NIR filters is available from
- Filter Bandpass: 40 nm
- Filter Surface Quality: 80-50 Scratch / Dig
- Minimum Peak Transmittance: 70 (%)
- Thickness: 6.1 mm
-
Supplier: Andover Corporation
Description: Andover offers a high-transmittance variant of its standard bandpass filter selection. By tailoring the blocking range to match the detector, we can provide the maximum possible throughput while maintaining good blocking to meet the customer’s needs. Wavelengths include all
- Application Specific: Infrared (IR)
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Surface Quality: Other
- Filter Type: Bandpass / Interference Filters
-
Supplier: Andover Corporation
Description: Andover offers a high-transmittance variant of its standard bandpass filter selection. By tailoring the blocking range to match the detector, we can provide the maximum possible throughput while maintaining good blocking to meet the customer’s needs. Wavelengths include all
- Application Specific: Infrared (IR)
- Diameter, Square Side, or Rectangular Length: 50 mm
- Filter Surface Quality: Other
- Filter Type: Bandpass / Interference Filters
-
Supplier: Andover Corporation
Description: Andover offers a high-transmittance variant of its standard bandpass filter selection. By tailoring the blocking range to match the detector, we can provide the maximum possible throughput while maintaining good blocking to meet the customer’s needs. Wavelengths include all
- Application Specific: Infrared (IR)
- Diameter, Square Side, or Rectangular Length: 12.5 mm
- Filter Surface Quality: Other
- Filter Type: Bandpass / Interference Filters
-
Supplier: Newport MKS
Description: The 20BPF10-850 Bandpass Filter is a 2 x 2 inch (50.8 x 50.8 mm) square bandpass filter with a center wavelength of 850 ± 2 nm and a Full Width Half Max of 13 ± 2 nm. See Curve 16, for transmission graph. Our Bandpass Filters pass
- Center Wavelength: 850 nm
- Diameter, Square Side, or Rectangular Length: 45.5 mm
- Filter Bandpass: 13 nm
- Filter Surface Quality: 80-50 Scratch / Dig, Other
-
Supplier: Newport MKS
Description: The 10BPF10-850 Bandpass Filter is a 1 inch (25.4 mm) diameter band pass filter with a center wavelength of 850 ± 2 nm and a Full Width Half Max of 13 ± 2 nm. Our Bandpass Filters pass a narrow spectral band of UV, visible, or NIR
- Center Wavelength: 850 nm
- Diameter, Square Side, or Rectangular Length: 20.2 mm
- Filter Bandpass: 13 nm
- Filter Surface Quality: 80-50 Scratch / Dig, Other
-
Supplier: Networks International Corporation
Description: Type: Bandpass Center Frequency: 850.000 (MHz) Bandwidth: (MHz) Poles: 5 Mount: PCB Package: PC-150-050-035 Length: 1.500 (in) Width: 0.500 (in) Height: 0.350 (in)
- Filter Type: Bandpass
-
Supplier: Artifex Engineering
Description: Central wavelength tolerance: ± 2nmFull width at Half-Maximum: 10nm ± 2nmTransmission at Central Wavelength: 10% (215nm), 15% (254-280nm), 40% (340-405nm), 50% (450-630nm) Blocking: 0.01%
- Filter Surface Quality: 60-40 Scratch / Dig
- Filter Type: Bandpass / Interference Filters, Color Filters
-
Supplier: Networks International Corporation
Description: Type: Bandpass Center Frequency: 0.455 (MHz) Bandwidth: (MHz) Poles: 4 Mount: PIN Package: CR-236-100-100P Length: 2.360 (in) Width: 1.000 (in) Height: 1.000 (in)
- Filter Category: Passive Filter, Quartz / Crystal Filter
-
Supplier: Edmund Optics Inc.
Description: Available in UV, VIS, and IR Center Wavelengths 10nm Bandwidths Available Hard and Soft Coating Options Available Bandpass Interference Filters are used extensively in a variety of biotech, biomedical, and quantitative chemical applications to selectively
- Center Wavelength: 850 nm
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Bandpass: 10 nm
- Filter Shape: Circular
-
Supplier: Suzhou Jiujon Optics Co., Ltd
Description: bandpass filters are made from high-quality fused silica and are designed to provide excellent optical performance. With a surface quality of 60-40 and a surface flatness of less than 1 Lambda at 632.8 nm, these filters provide exceptional clarity and precision to
- Application: Infrared (IR)
- Center Wavelength: 1050 to 1064 nm
- Filter Bandpass: 4 nm
- Filter Shape: Circular
-
Supplier: Rapid Spectral Solutions
Description: Rapid Spectral Solutions (RSS) has a listing of many bandpass filters with FWHM of 1.0 to 50 nm, with a feature of accepting light from a substantial field of view. Filters can be provided with Acceptance Angles up to +- 50 degrees from normal with little loss of normal
- Application: Infrared (IR), Visible (VIS)
- Center Wavelength: 400 to 2500 nm
- Diameter, Square Side, or Rectangular Length: 6.25 to 100 mm
- Filter Bandpass: 1 to 50 nm
-
Supplier: Temwell Corporation / Temstron Co., Ltd.
Description: Available in stock, delivery in 72 hours
- Bandwidth: 120000 kHz
- Filter Design: Other
- Filter Technology: Passive Filter
- Filter Type: Bandpass
-
Supplier: Ross Optical Industries
Description: These types of filters are used to pass certain narrow wavelength band with high transmission and block the un-wanted light. The pass band can be very narrow such as 10nm or very wide depending on your specific application. Rejection band are deeply blocked with OD from 3 to 5 or above
- Application: Infrared (IR), Visible (VIS), Ultra-Violet (UV)
- Diameter, Square Side, or Rectangular Length: 3 mm
- Filter Shape: Circular
- Filter Surface Quality: 80-50 Scratch / Dig
-
Supplier: Newport MKS
Description: The 10BPF10-232 UV Bandpass Filter is a 1 inch (25.4 mm) diameter bandpass filter with a center wavelength of 232 ± 2 nm and a Full Width Half Max of 11 ± 3 nm. See Curve 1, for transmission graph. Our UV Bandpass Filters pass a narrow spectral
- Diameter, Square Side, or Rectangular Length: 25.4 mm
- Filter Surface Quality: 80-50 Scratch / Dig, Other
- Filter Type: Bandpass / Interference Filters, Other
- Thickness: 5.08 mm
-
Supplier: Chroma Technology Corp.
Description: The TRF49900 single band TIRF filter sets utilize the same laser clean-up filter and bandpass emission filter as the corresponding 49900 series filter set, but also contain an additional longpass emission filter for greatly increased blocking of the TIRF
- Application: Visible (VIS)
- Center Wavelength: 532 nm
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Shape: Circular, Rectangular
-
Supplier: Chroma Technology Corp.
Description: The TRF49900 single band TIRF filter sets utilize the same laser clean-up filter and bandpass emission filter as the corresponding 49900 series filter set, but also contain an additional longpass emission filter for greatly increased blocking of the TIRF
- Application Specific: Visible (VIS)
- Diameter, Square Side, or Rectangular Length: 25 mm
- Filter Set: Yes
- Filter Shape: Circular, Rectangular
-
Supplier: Abrisa Technologies
Description: Notch filters block a relatively narrow band of wavelengths between shorter and longer pass bands. This example narrow band minus filter has a nominal bandwidth of 110nm with an average reflection of more than 99% over a nominal bandwidth of 30-40 nm. The pass bands have
- Filter Type: Bandpass / Interference Filters
-
Supplier: Materion Corporation
Description: Materion Barr Precision Optics & Thin Film Coatings designs and manufactures both edge-type and bandpass-type variable filters to customer specifications. The key feature of these devices is that spectral properties vary with position in a prescribed way along the lengthwise direction
- Filter Shape: Square, Rectangular
- Filter Type: Bandpass / Interference Filters
-
Supplier: Newport MKS
Description: The TBF-1550-2.0-FCUPC Tunable Bandpass Fiber Optic Filter is used to adjust the center wavelength of a narrow passband within a 30 nm range around 1550 nm. A 0.8 nm tunable filter model is offered, having a 1535–1565 nm tuning range. The
-
Supplier: Daheng New Epoch Technology, Inc.
Description: for certain wavelengths, while other wavelengths are either reflected or absorbed. For a given wavelength a very narrow bandwidth(3nm-10nm) can be obtained. Optical interference filters are angle-sensitive and should be used with normal or near normal incident light. If the
- Diameter, Square Side, or Rectangular Length: 25.4 mm
- Filter Shape: Circular
- Filter Type: Bandpass / Interference Filters
- Thickness: 6 mm
-
Supplier: Rainbow Research Optics, Inc.
Description: . Interference Bandpass Filters Reflective Neutral Density Filters Absorptive Neutral Density Filters Long Wave Pass Filters Short Wave Pass Filters Color Glass Bandpass Filters Color Glass Long Wave Sharp Cut Filters Heat Control
- Filter Shape: Circular, Square
- Filter Surface Quality: 20-10 Scratch / Dig
-
Supplier: Shanghai Optics
Description: highly saturated in color. A red filter, for instance, will transmit red wavelengths and reflect cyan. A green filter will transmit green and reflect magenta. Shanghai Optics manufactures high quality dichroic filters in longpass, shortpass, bandpass, bandblocking and
- Filter Type: Short Pass Filters, Long Pass Filters
-
Supplier: DigiKey
Description: 3.115GHz Center Band Pass Ceramic Filter 850MHz 50Ohm 4-SMD, No Lead
- Filter Technology: Passive Filter
- Filter Type: Bandpass
- Frequency (Fc): 3115 MHz
- Insertion Loss: 3 dB
Find Suppliers by Category Top
Featured Products Top
-
The 1550nm bandpass filter is built on HWB850 substrate, which is known for its excellent optical properties and durability. The substrate is then coated with a specialized 1550nm bandpass filter that allows only a specific range of wavelengths centered around 1550nm to pass (read more)
Browse Optical Filters Datasheets for Suzhou Jiujon Optics Co., Ltd -
Key Features: High Reflectivity: The coating is optimized to achieve high reflectivity at 532nm, ensuring efficient and reliable performance in green laser applications. Precision Engineering: The coating is meticulously (read more)
Browse Optical Filters Datasheets for Suzhou Jiujon Optics Co., Ltd -
The 1550nm bandpass filter is built on HWB850 substrate, which is known for its excellent optical properties and durability. The substrate is then coated with a specialized 1550nm bandpass filter that allows only a specific range of wavelengths centered around 1550nm to pass (read more)
Browse Optical Filters Datasheets for Suzhou Jiujon Optics Co., Ltd -
TWE as low as 0.01 wave RMS / inch measured at 632.8 nm Flat-top, ultra-narrow bandpass filters are specifically designed to have extremely steep edges and high transmission throughout the entire passband. This square spectral shape is able to be (read more)
Browse Optical Bandpass Filters Datasheets for Alluxa, Inc. -
1064.4-0.85 OD6 Ultra Narrow Bandpass Filter Ultra-narrowband optical interference filter with a 1064.4 nm center wavelength (CWL), a 0.85 nm full-width at half (read more)
Browse Optical Bandpass Filters Datasheets for Alluxa, Inc. -
Optics’ 10nm filters are ideal for chemical, environmental, or elemental analysis. Hard coated filters offer maximum performance with exceptional durability. Traditionally coated evaporated filters are cost-sensitive alternatives. Bandpass Filters are angular sensitive, so care should be taken when (read more)
Browse Optical Filters Datasheets for Changchun Yutai Optics Co., Ltd. -
What types of UV bandpass filters are available from Yutai Optics? (1) Narrowband UV BPF FWHM: usually 2-20nm (e.g. 254±5nm, 365±2nm). Blocking(OD): optical density in other UV bands and visible regions up to (read more)
Browse Optical Filters Datasheets for Changchun Yutai Optics Co., Ltd. -
.2 µm) •CWL tolerances as tight as 0.05 nm •FWHM bandwidths as narrow as 0.1 nm •TWE as low as 0.01 wave RMS / inch measured at 632.8 nm Flat-top ultra-narrow bandpass filters for precision control Flat-top, ultra-narrow bandpass filters are (read more)
Browse Optical Bandpass Filters Datasheets for Alluxa, Inc. -
224 OD5 Ultra Steep Longpass Filter Ultra Steep longpass filter with a 228 nm (Nominal) cut-on wavelength, greater than 90% average transmittance from 235 nm to 600 nm (read more)
Browse Optical Bandpass Filters Datasheets for Alluxa, Inc. -
.1 nm TWE as low as 0.01 wave RMS / inch measured at 632.8 nm Flat-top ultra-narrow bandpass filters for precision control Flat-top, ultra-narrow bandpass filters are specifically designed to have extremely steep edges and high transmission (read more)
Browse Optical Bandpass Filters Datasheets for Alluxa, Inc.