Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Artifex Engineering
Description: Specifications: Material: Stainless Steel Non Magnetic Thickness: 0.0127mm / 0.0005" Diameter: 9.53mm / 0.375" Substrate Finish: None
- Aperture Tolerance: 0.5000 to 10 µm
- Geometry Type: Pinhole
- Hole Diameter/Slit Width: 1 to 1000 µm
- Substrate Material: Metal
-
Supplier: Artifex Engineering
Description: This model is available in aperture mounts for a secure mechanical support. The mounts also fit into various optical assemblies. A label engraved on the mount to identify the size of pinhole would make operators not to mix up. * Pinhole Material: 302 Non Magnetic Stainless Steel
- Aperture Tolerance: 0.5000 to 10 µm
- Geometry Type: Pinhole
- Hole Diameter/Slit Width: 1 to 1000 µm
- Substrate Material: Metal
-
Supplier: Artifex Engineering
Description: One surface is coated with gold to reflect the incoming high energy laser radiation Material: thin copper sheet Thickness: 0.1524mm / 0.006" Diameter: 9.53mm / 0.375" Finished: Gold Plated and black anodized
- Aperture Tolerance: 0.7500 to 6 µm
- Geometry Type: Pinhole
- Hole Diameter/Slit Width: 5 to 200 µm
- Substrate Material: Metal
-
-
Supplier: Artifex Engineering
Description: This model is available in aperture mounts for a secure mechanical support. The mounts also fit into various optical assemblies. A label engraved on the mount to identify the size of pinhole would make operators not to mix up. * Pinhole Material: Thin copper sheet * Pinhole
- Aperture Tolerance: 0.7500 to 6 µm
- Geometry Type: Pinhole
- Hole Diameter/Slit Width: 5 to 200 µm
- Substrate Material: Metal
-
Supplier: Hamamatsu Photonics
Description: The C11750 is an optical pinhole inspection unit designed to detect pinhole defects in aluminum laminated pouches for rechargeable batteries and fuel cell separators. The C11750 is available with light source units and light condenser units (sold separately) that are customizable to
- Instrument Type: Flaw Detectors
- Technology: Optical / Laser
-
Supplier: Hamamatsu Photonics
Description: The C12760 is a versatile pinhole inspection unit designed for rechargeable battery separators and can detect pinholes in translucent materials that allow light to pass through and so cannot be detected with other units of our lineup. The C12760 is compatible with high-speed conveyor
- Instrument Type: Flaw Detectors
- Technology: Optical / Laser
-
Supplier: Hamamatsu Photonics
Description: The C12570 series is designed to inspect pinhole defects in aluminum laminated film and metal foil. Among pinhole inspection units for film, the C12570 series has the highest sensitivity capable of pinhole detection down to 2 µm in diameter making it ideal for strict inspection
- Instrument Type: Flaw Detectors
- Technology: Optical / Laser
-
Supplier: Hamamatsu Photonics
Description: The C12190 is an optical pinhole inspection unit optimized for inspection of aluminum laminate film and metal foil. It has a detection width selectable from 300 to 1800 mm to match the workpiece size and supports high-speed conveyor lines of up to 600 meters per minute with no drop in
- Instrument Type: Flaw Detectors
- Technology: Optical / Laser
-
Supplier: Advance Security Products
Description: Color Board Camera Board Camera with Conical Pinhole lens This economical High Resolution--Sony Super HAD CCD camera is an easy to connect color camera. You get a very good distortion free wide view color picture. Installation and Recording All of our board
- Camera Function: Video
-
Supplier: Advance Security Products
Description: Color Board Camera Board Camera with Super Conical Pinhole lens This economical High Resolution--Sony Super HAD CCD camera is an easy to connect color camera. You get a very good distortion free wide view color picture. Installation and Recording All of our
- Camera Function: Video
-
Supplier: Newport MKS
Description: The 900P-MNT Pinhole Mount is magnetically registered against the machined faces of the non-rotating X-Y adjustment spindles on a 900 Three-Axis Spatial Filter. A precision-machined slot in the pinhole mount mates repeatably to the spindle face, resisting accidental motion of the mount
- Filter Type: Other
-
Supplier: Universe Kogaku (America) Inc.
Description: Universe's CCD lens assemblies are ideal for your board and miniature camera applications. Standard lens assemblies are available in 2/3"-1/4" formats and a wide range of focal lengths. A sampling of stock focal lengths is included below. We also have pinhole CCD lenses for wide angle viewing
- Adjustability: Fixed Focal Length
- Anti-reflective Coating: Yes
- Aperture Range (F-Number): 4.5
- Application / Specialty: Pinhole
-
Supplier: Universe Kogaku (America) Inc.
Description: Universe's CCD lens assemblies are ideal for your board and miniature camera applications. Standard lens assemblies are available in 2/3"-1/4" formats and a wide range of focal lengths. A sampling of stock focal lengths is included below. We also have pinhole CCD lenses for wide angle viewing
- Adjustability: Fixed Focal Length
- Anti-reflective Coating: Yes
- Aperture Range (F-Number): 4.5
- Application / Specialty: Pinhole
-
Supplier: Universe Kogaku (America) Inc.
Description: Universe's CCD lens assemblies are ideal for your board and miniature camera applications. Standard lens assemblies are available in 2/3"-1/4" formats and a wide range of focal lengths. A sampling of stock focal lengths is included below. We also have pinhole CCD lenses for wide angle viewing
- Adjustability: Fixed Focal Length
- Anti-reflective Coating: Yes
- Aperture Range (F-Number): 4
- Application / Specialty: Pinhole
-
Supplier: Newport MKS
Description: The 910P-MNT Pinhole Mount is used for mounting a PH series pinhole for use with a 910A Spatial Filter.
- Filter Type: Other
-
Supplier: Security Camera Warehouse
Description: SCH902 Pin Hole Camera Key Features 1/3" Sony Color CCD 420 TV Lines 4mm Pinhole Lens 0.5 Lux / F1.2 DC 12V, 120mA Effective Pixels PAL: 500(H)x582(V) NTSC: 510(H)x492(V) Sensing Area: 4.9mmx3.7mm Signal System: PAL
- Camera Function: Video
-
Supplier: bulbs.com
Description: Progress Lighting Three-Light Ceiling Mount Pinhole Back Back Directional Light Fixture, White Finish. 9 1/2" Diameter, 5" High. Extends 4 1/4" down from ceiling. Uses one MR16 lamp, each 50W maximum, GU10 base - included.
- Lamp Type: Halogen
- Light Fixture Type: Ceiling Fixtures
- Light Fixture Wattage: 50 watts
-
Supplier: bulbs.com
Description: Progress Lighting One-Light Ceiling Mount Pinhole Back Back Directional Light Fixture, White Finish. 5" Diameter, 5" High. Extends 5" down from ceiling. Uses one MR16 lamp, each 50W maximum, GU10 base - included.
- Lamp Type: Halogen
- Light Fixture Type: Ceiling Fixtures
- Light Fixture Wattage: 50 watts
-
Supplier: bulbs.com
Description: Progress Lighting One-Light Ceiling Mount Pinhole Back Back Directional Light Fixture, Brushed Nickel Finish. 5" Diameter, 5" High. Extends 5" down from ceiling. Uses one MR16 lamp, each 50W maximum, GU10 base - included.
- Lamp Type: Halogen
- Light Fixture Type: Ceiling Fixtures
- Light Fixture Wattage: 50 watts
-
Supplier: bulbs.com
Description: Progress Lighting One-Light Ceiling Mount Pinhole Back Back Directional Light Fixture, Urban Bronze Finish. 5" Diameter, 5" High. Extends 5" down from ceiling. Uses one MR16 lamp, each 50W maximum, GU10 base - included.
- Lamp Type: Halogen
- Light Fixture Type: Ceiling Fixtures
- Light Fixture Wattage: 50 watts
-
Supplier: AMPP Resources
Description: You are purchasing a downloadable pdf of this Standard. SSPC-PA 19, Visual Evaluation of Pinholes in a Concrete or Masonry Coating This new standard will assist specifiers, contractors and inspectors in determining the acceptability of a coating applied over concrete or masonry
-
Supplier: Newport MKS
Description: The PH-SET Unmounted Pinhole Set includes one of each size unmounted pinhole, including: PH-5, PH-10, PH-15, PH-25, and PH-50.
- Filter Set: Yes
- Filter Type: Other
- Thickness: 0.0152 mm
-
Supplier: Newport MKS
Description: The MS-PA-1 Pinhole Adaptor is used to mount 0.375" dia. pinhole or slit substrates to the MS-125 Series miniature linear stages.
-
Supplier: Piezosystem Jena, Inc.
Description: this development is to replace the tedious process of swapping in different size pinhole apertures with a controllable dual slit design. The design had to be stable and offer an improvement in x-ray scatter. Also, an improvement in the initial alignment technique was part of the new
- Geometry Type: Pinhole
- Hole Diameter/Slit Width: 240 to 300 µm
- Substrate Material: Metal
-
Supplier: Accuris
Description: Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes
-
Supplier: Advance Security Products
Description: Dual Mode Pinhole Board Camera Sees Great in the Light and the Dark Dual mode board camera, 480 lines resolution. Automatic switching between a high resolution crystal clear color picture in normal lighting to a B&W picture when it gets dark. You will not find another color board
- Camera Function: Video
-
Supplier: Advance Security Products
Description: something thin, such as fabric. Great Color and High Resolution This camera provides superior color contrast and 550 lines of High Resolution color. A Sony Super HAD 1/3" CCD chip is incorporated in this pinhole camera and provides the widest viewing angle when it comes to board cameras
- Camera Function: Video
-
Supplier: Accuris
Description: Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
-
Supplier: Accuris
Description: Polymer Coated Paper and Board Intended for Food Contact - Detection of Pinholes
-
Supplier: Accuris
Description: Standard Practice for Determining Pinhole Density in Photoresist Films Used in Microelectronic Device Processing
-
Supplier: Jiangyin Deli Laser Solutions Co., Ltd.
Description: :Can be blacked or not Precision Pinholes:Available,S ized Ranging from 5 to 1,000 Microns Apply to optical equipment. If not listed, please contact us for more customized information. We accept small quantity customization but also mass production with competitive price
- Geometry Type: Array, Pinhole, Slit
- Hole Diameter/Slit Width: 5 to 1000 µm
- Substrate Material: Metal
- Thickness: 0.0500 mm
-
Supplier: ASTM International
Description: Method of Test for Pinholes in Glassine and Other Greaseproof Papers (Withdrawn 1974)
-
Supplier: Rigaku Corporation
Description: The S-MAX3000 pinhole SAXS camera design is available with a choice of conventional or high brilliance X-ray sources. A 3-meter, fully evacuated camera length provides both high intensity and high resolution. Coupled with a fully integrated 2-dimensional multi-wire proportional counter, the
- Detector Type: Camera / Film
- Diffracted Beam Optics: Collimators and Slits
- Features: Benchtop
- Maximum Specimen Diameter: 1.5 to 5 mm
-
Description: Features: • Ultra wide angles of view and compact structure • Modules available: Fisheye, Super Wide Angle, and Pinhole Lenses • Available as off-the-shelf and custom versions • Image distortion customizable • IP67 sealing
- Focal Length: 0.0033 m
- Type: Specialty / Other
- Wavelength: 8000 to 17000 nm
Find Suppliers by Category Top
Featured Products Top
-
or narrow, such as cracks or pinholes, capillarity assists the penetration. After sufficient time has passed for the penetrant to enter the discontinuity, the penetrant on the surface is cleaned off of the part. Capillary action is again employed to act as a blotter to draw penetrant from (read more)
Browse Nondestructive Testing (NDT) Services Datasheets for NDE Professionals Inc. -
EVs. For example, when polyimide (PI) and polyamide-imide (PAI) are used as the enamel layer, the material is too thick to provide sufficient reliability for high voltage. Pinhole defects can also occur when using PI and PAI. When (read more)
Browse Datasheets for AGC Chemicals Americas, Inc. -
EVs. For example, when polyimide (PI) and polyamide-imide (PAI) are used as the enamel layer, the material is too thick to provide sufficient reliability for high voltage. Pinhole defects can also occur when using PI and PAI. When (read more)
Browse Datasheets for AGC Chemicals Americas, Inc. -
to push the boundaries of miniaturization, density, and functionality in part design—without sacrificing speed or accuracy. For many product designers, incorporating small holes in parts—such as ø1 mm fluid paths or pinholes—has been a bottleneck in the (read more)
Browse CNC Machining Services Datasheets for meviy -
process parts more quickly, each operator has their own application technique, which leads to high part-to-part variability in film thickness, quality, uniformity, and application time. Ideally, a single coat is applied; however, the paint must be free of voids and pinholes so that the subsequent Ni (read more)
Browse Industrial Ceramic Materials Datasheets for 3X Ceramic Parts Company Limited
Conduct Research Top
-
Plastics Consultancy Network - Analysis of plastics
or with a pin-hole in the lid. Pressure DSC allows this to be done at higher than ambient pressures, and modulated DSC is a little more sensitive particularly to mixtures or co-polymers where 2 things may happen at once.
-
The Use of Optically Activated Pigmented Epoxy Systems in Water Storage Tanks (.pdf)
, identifying pinholes and reduce premature failures due to poor film thickness on edges, angles or difficult to inspect areas. There are epoxy coatings, which meet the NSF Standard 61 requirements, available with OAP technology.
-
Seals of Approval
aren t coupled to the packaging line, downtime in packaging won t impact continued operations, Coyle says. For lines 3, 4 and 5, product exits the filler and is check-weighed and leak-tested, the latter using a Nikka Densok (Denver, Colo.) high-voltage pinhole detector. It is then placed
-
The Future of Barrier Packaging
and materials used to make plug assists or forming pins that will enhance the ability to form the structure, and allow for more radical shapes with less risk of pin-holes, delamination and stress fracturing. Here, technology is also poised for major technological changes. In order to achieve
-
Characterization Techniques for Miniature Low Power X-Ray Tubes
An X-ray shielded test chamber has been designed and built that includes a CCD-pinhole. camera and energy-dispersive silicon PIN-diode detector for spectrum collection. The. use of this chamber is an innovative approach that allows rapid imaging of the electron. beam spot on the anode, as well
More Information Top
-
Tasks and operation of the Technical exchange of experience of the BASF
Occupying informations are opened up, classified and stored in 18 sachbezogenen files (Steil‐, Sichtloch‐ and pinhole files).
Indicates content that may require registration and/or purchase.