-
Supplier: SAE International
Description: An experimental investigation has been carried out to quantify the performance enhancements with a suction line heat exchanger (SLHX) in an AC system. An off-the shelf double pipe cross fluted SLHX is used for this investigation. System level bench tests are conducted
-
Supplier: IHS ESDU
Description: manufacturers are tabulated as a function of heat load, operating pressure and the types of single-phase and boiling/condensing cold- and hot-side fluids for the following types of exchangers: shell-and-tube, double-pipe, printed circuit, plate- fin, air-cooled and welded
-
Supplier: CSA Group
Description: ISO 12212:2012 specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of hairpin heat exchangers for use in the petroleum, petrochemical and natural gas industries. Hairpin
-
-
Description: ISO 12212:2012 specifies requirements and gives recommendations for the mechanical design, materials selection, fabrication, inspection, testing and preparation for shipment of hairpin heat exchangers for use in the petroleum, petrochemical and natural gas industries. Hairpin
-
Supplier: Altaflo
Description: available in coiled hose and convoluted constructions Low permeation PFA tubing and pipe are also available Semiconductor grade PFA is also available - pls. view ALTAFLUOR 480® UHP PFA Tubing & Pipe information Applications Chemical process Heat exchangers Laboratory
- Temperature Range: -300 to 500 F
- Wall Thickness: 0.113 to 0.133 inch
- Diameter: 3/4"
- Schedule: 40
-
Supplier: Armstrong International
Description: The DW (double wall) version of the Armstrong Flo-Rite-Temp Instantaneous Water Heater uses a double wall tube to provide positive separation of the steam and water in the heat exchanger. The area between the walls of the tubes vents to atmosphere so you can detect tube
- Maximum Operating (Sheath) Temperature: 180 F
- Flange or Thread Diameter: 1.25 to 3 inch
- Maximum Operating Temperature: 180 F
- Heater Type: Circulation Heater, Water Heater
-
Supplier: Pexco
Description: Insulation Emissions monitoring Flow monitoring Food Processing Heat Exchangers Laboratory Applications Semiconductor
- Outside Diameter / Size: 0.0625 to 2.125 inch
- Maximum Inside Diameter / Size: 0.03 to 2 inch
- Pressure Rating: 612 psi
- Temperature Range: -300 to 500 F
-
Supplier: Armstrong International
Description: Armstrong blends revolutionary digital water temperature control technology with instantaneous Plate & Frame heat exchanger design to deliver Digital-Flo®, an industry changing series of Boiler Water to Water Heaters. Digital-Flo® uses digital technology featuring The Brain® Digital
- Maximum Operating (Sheath) Temperature: 180 F
- Flange or Thread Diameter: 2 to 3 inch
- Maximum Operating Temperature: 180 F
- Heater Type: Circulation Heater, Water Heater
-
Supplier: Thermocold Costruzioni Srl
Description: (complete of differential pressure switch and anti-freeze protection electrical heater). • Recovery heat exchanger direct expansion shell and tube type with water connections. • High efficiency condenser coils with seamless copper tubes and alluminium .ns. • Electronic expansion valve.
-
Supplier: Altaflo
Description: available in coiled hose and convoluted constructions Low permeation PFA tubing and pipe are also available Semiconductor grade PFA is also available - pls. view ALTAFLUOR 480® UHP PFA Tubing & Pipe information Applications Chemical process Heat exchangers Laboratory
- Outside Diameter / Size: 0.428 to 0.438 inch
- Maximum Inside Diameter / Size: 0.354 inch
- Wall Thickness: 0.04 inch
- Temperature Range: -300 to 500 F
-
Supplier: BMT USA, LLC
Description: Dimple or half-pipe heat exchange surface Coded or non-coded vessels Complete documentation packages
- Volume Capacity: 1.5 to 6,000 gallons
- Features: Double Wall, Insulated, Other Tank, Portable, Vented
- Type: General Purpose/ Bulk Storage Tank, Process Tank
- Material: Stainless Steel
-
Supplier: Gems Sensors & Controls
Description: actuation at the desired flow rate. As flow increases in a pipe, the paddle of the switch pivots to move out of the liquid path, producing less than 3 psig (.21 bar) of pressure drop regardless of pipe size. Using Gems™ Safe-Pak® Relays and Barriers, these switches provide automatic
- Pipe Diameter: 0.5 to 1 inch
- Media Temperature Range: -30 to 300 F
- Liquid Volumetric Flow Rate: 5 to 52 GPM
- Operating Pressure: 2,000 psi
-
Supplier: Chemac Inc./Uraca/Uhde HPT/Gather/BHDT
Description: high-efficiency heat exchangers
Find Suppliers by Category Top
Featured Products Top
-
The HEXNOVAS Pillow Plate Heat Exchanger (also known as Dimple Plate Heat Exchanger) is designed for efficient thermal exchange in applications involving viscous, fouling, or particulate-laden fluids. Manufactured using laser welding technology, the pillow plates create a highly (read more)
Browse Heat Exchangers Datasheets for Hexnovas Heat Exchanger Technology Co., Ltd -
Qualtek heat shrinkable products include Polyolefin, Silicon, Teflon, Viton®, Kynar®, Halogen-Free, high temp, single wall, and adhesive lined tubing with varying shrink ratio, colors and sizes. Wire Harnesses & Splices Hose & Pipe Protection (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
-linked polyolefin material. Provides abrasion and vibration protection for components such as plastic pipes, rubber hoses, and wiring harnesses. QSFU-5000 is resistant to heat, humidity, and harsh environments. Operating temperature: -40°C to +125°C Minimum shrink temperature (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
Tubing Automotive heat shrink tubing is a versatile solution employed in various applications within the automotive industry. Primarily, these products serve to insulate, seal, and protect electronic components, wires, terminals, hoses and pipes, cables and splices. Our automotive product (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
• Pumps and valves • Heat exchangers • Chemical equipment • Industrial sealing systems • OEM machinery (read more)
Browse Oil Seals and Grease Seals Datasheets for Golden Collar Technology Co., Ltd . -
heating the water and condensing the steam. After exiting the heat exchanger, the hot water enters the tempering valve (V-5) and then the mixing valve (V-1) where it is blended with cold water to produce an outlet of 80°F water. The steam valve remains closed should the water supply be interrupted (read more)
Browse Mixing Valves Datasheets for ThermOmegaTech® -
, these products serve to insulate, seal, and protect electronic components, wires, terminals, hoses and pipes, cables and splices. Our automotive product line includes heat shrinkable tubing, adhesive lined or single-wall, water blocking systems, and protection sleeves. Qualtek excels in (read more)
Browse Shrink Tubing Datasheets for Qualtek Electronics Corp. -
protect electronic components, wires, terminals, hoses and pipes, cables and splices. Our automotive product line includes heat shrinkable tubing, adhesive lined or single-wall, water blocking systems, and protection sleeves. Qualtek excels in offering distinctive solutions that not (read more)
Browse Protective Sleeving Datasheets for Qualtek Electronics Corp. -
reliable performance in various critical applications: Pipe and Duct Insulation: The MT1000 Needled Fiberglass Mat provides lightweight yet durable insulation. It can ensure process efficiency and reduce energy costs. Boilers and Heat Exchangers: (read more)
Browse Protective Liners and Lining Systems Datasheets for Mid-Mountain Materials, Inc. -
gas facilities around the globe. It inspects gas turbines, pipes, pressure vessels, heat exchangers and even vessel hulls. The robot’s impressive agility is based on its locomotion system, at the core of the concept initiated in 2009. The Swiss Federal Institute of Technology in (read more)
Browse Electrical Connectors Datasheets for LEMO USA, Inc.
More Information Top
Indicates content that may require registration and/or purchase.
-
Heat Transfer Applications for the Practicing Engineer
Double Pipe Heat Exchangers .
-
Thermal Design: Heat Sinks Thermoelectrics Heat Pipes Compact Heat Exchangers and Solar Cells
F.1.3 Meshing the Double Pipe Heat Exchanger in Gambit 595 .
-
Emerging Trends in Science, Engineering and Technology
Experimental investigations of heat transfer enhancement and variation of friction factor have been presented for a typical test section of a u-tube double pipe heat exchanger involving a circular tube filled with a full length insert.
-
Extended Surface Heat Transfer
Heat Transfer and Pressure Drop of Liquids in Double Pipe Heat Exchangers , Trans.
-
Index
… 2.2.2-16/2.2.2-17 turbulent flow in, 2.2.2-17/2.2.2-18 Currie, R, 4.12.1/4.12.6 Cut-and-twist factor, in enhancement of heat transfer in double pipe heat exchangers , 3.2.3-1 …
-
Technological Developments in Networking, Education and Automation
A Proposal of a Nonlinear Observer Applied to the Heat Exchange Phenomena in a Double Pipe Heat Exchanger ..............................................................................................................387 .
-
Lumped‐differential analysis of concurrent flow double‐pipe heat exchanger
Cotta, R. M. and M. N. Ozisik, “Thermally Developing Concur- rent Flow Circular Double Pipe Heat Exchanger Analysis”, Proc. 8‘h Int.
-
http://www.ijera.com/papers/Vol4_issue7/Version 2/B047020913.pdf
Experimental and Exergy Analysis of A Double Pipe Heat Exchanger for Parallel Flow Arrangement .
-
Investigation of turbulent flow and heat transfer in an air to water double-pipe heat exchanger
2013) Heat transfer enhancement of nanofluids in a double pipe heat exchanger with louvered strip inserts.
-
Compound heat transfer enhancement for shell side of double-pipe heat exchanger by helical fins and vortex generators
For a double pipe heat exchanger , in the situation that the thermal resistance of the shell side is much higher than that of the tube side, the heat transfer enhancement for shell side is critical to improve the overall performance of the …