Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Marion Process Solutions
Description: For fast and gentle mixing, Marion's Fluidizing Paddle Mixer uses large paddles with two-directional sweeping motions to create a fluidizing bed. Minimizing direct contact with the paddles, material is swept by the moving air pushed outwards and inwards in fluid mixing movements. The
- Mounting: Floor-Mounted
- Mixer Type: Paddle
-
Supplier: Accuris
Description: MIXER, FLUID, ELECTRIC
-
Supplier: GN Solids control Co., Ltd.
Description: GNSL series Jet Mud mixer is used to prepare and increase the drilling fluids weight by adding and mixing bentonite which changes the fluid density, the mud density, viscosity, and dehydration properties. The effect is more prominent when coupled with a Shear Pump. GNSL jet mud
- Feed Rate: 11,887.74 to 84,535.04 GPH
- Motor Power: 15 to 100 HP
- Operating Condition: Continuous Feed
- Mounting: Floor-Mounted
-
-
Supplier: Cammda Corporation
Description: These mixing nozzles are inexpensive, disposable motionless mixers that provide thorough, air-free blending of two-part thermosetting resin systems. They work equally well on dual cartridge systems and meter-mix-dispense machines. The materials do not meet until they enter the disposable
- Application: Adhesive / Silicone
- Dispensed From: Barrel / Syringe
- Dispensing Type: Bead
- Mounting: Hand Held
-
Supplier: Sulzer Ltd.
Description: Static mixers are tubular internals that produce desired mixing and dispersion effects as the fluid flows around motionless mixer parts. The fluid flow is provided by pumping. Sulzer has been pioneering the static mixing business for more than 35 years. Today, you can
- Mixer / Homogenizer Location: In-Line
- Features: Industrial
- Media Type: Liquids, Solutions, Emulsions
- Mixer Type: Static
-
Supplier: Neptune Chemical Pump Co., Inc.
Description: Neptune's economy line of small direct drive mixers for small batches of low viscosity fluids.
- Motor Speed: 1,725 rpm
- Motor Power: 0.25 to 0.5 HP
- Mixer Type: Agitator, Propeller / Impeller
- Operating Condition: Batch Operation
-
Supplier: OMEGA Engineering, Inc.
Description: housing with FNPT ends. CPVC and clear PVC housings available. OMEGA FMX8400 Series mixers offer efficient mixing of low or high viscosity fluids at low pressure drop. Also ideal for two-phase (gas-liquid) mixing and blending of gases. Elements consist of a series of left and right
- Operating Temperature: 250 F
- Pressure Range: 200 to 8,750 psi
- Applications / Industry: Adhesives Processing, Chemical Processing, Water / Wastewater Treatment
- Operating Condition: Continuous Feed
-
Supplier: U.S. Plastic Corporation
Description: Shaft size: 5/16" diameter x 12" long. Mixer blade is 2-1/2" diameter. Mixer position easily adjustable on sturdy support stand. 0-5000 RPM. Maximum overall height is 29-1/2". Small and compact. Will agitate up to 5 gallons of water. Variable speed control of 5,000 rpm by means of a
-
Supplier: SAE International
Description: to identify critical operating conditions. It is demonstrated that the pressure loss over the mixer is a function of the mixer blocked area of the exhaust pipe but also of the mixer's geometrical features.
-
Supplier: MXD Process
Description: Side entry mixers allow for mixing high volume applications at a reduced operating cost from a traditional top-entry mixer. Utilizing a shorter mixing shaft and our unique high efficiency fluid foil impeller, side entry tank mixers provide higher fluid flow per
- Media Viscosity: 0 to 500 cps
- Motor Speed: 384 rpm
- Motor Power: 2 HP
- Features: Other Mixer Type
-
Supplier: Milton Roy
Description: of side-entry mixers for large-volume storage tanks. Our side-entry mixer is mounted quickly and easily to the tank flange and delivers the most effective blending results in an extremely efficient unit. Our innovative small diameter SABRE® impeller allows for reduced energy
- Motor Speed: 200 to 1,500 rpm
- Motor Power: 10.0516528867711 to 73.7121211696551 HP
- Operating Temperature: 32 to 482 F
- Mixer Type: Agitator
-
Supplier: Nordson EFD
Description: retained fluid volume, substantially reducing fluid waste for better cost savings. Features 20% shorter length than comparable square mixers 30% less retained volume for reduced fluid waste Improved mixing without compromising other performance factors OptiMixers work
- Features: Adhesives Processing, Laboratory
- Media Type: Liquids, Solutions, Emulsions
- Mixer Type: Static
-
Description: to mix at speeds ranging from 10 to 600 rpm. The series sizes of mixers enables the flexibility to handle a wide range of fluid types and mixing duties, such as high intensity mixing and gentle product mixing. Mag mixers for sealless mixing and blending. Magnetic mixers
-
Supplier: MXD Process
Description: Side entry mixers allow for mixing high volume applications at a reduced operating cost from a traditional top-entry mixer. Utilizing a shorter mixing shaft and our unique high efficiency fluid foil impeller, side entry tank mixers provide higher fluid flow per
- Media Viscosity: 0 to 500 cps
- Motor Speed: 388 rpm
- Motor Power: 2 HP
- Features: Explosion Proof, Other Mixer Type
-
Supplier: Nordson EFD
Description: Mixers Ideal for messy or short pot life adhesives, EFD Series 140 mixers’ low-cost, all-plastic assembly allows disposal of the mixer instead of solvent purging or baking. The mixer’s translucent housing allows its interior to be inspected to determine its condition. Its
- Features: Adhesives Processing, Laboratory
- Media Type: Liquids, Solutions, Emulsions
- Mixer Type: Static
-
Supplier: Techcon
Description: Cartridge Mixer for 2.5 (74ml), 6.0 (177ml), 8.0 oz. (237ml) kit. The TS6500 Series cartridge mixer provides complete automatic mixing of two-component material filled in a cartridge kit. The features rich TS6500 Series accommodates all standard size cartridge kits ranging from 2.5 oz
- Motor Speed: 139 rpm
- Pressure Range: 80 psi
- Applications / Industry: Adhesives Processing
- Operating Condition: Batch Operation
-
Supplier: Nordson EFD
Description: inverters that channel fluids from the walls of the mixer to the center of the plastic mixer and from center to walls. Features Shorter length than comparable spiral mixers Cost savings from reduced adhesive waste Improved service life compared to similar square
- Features: Adhesives Processing, Laboratory
- Media Type: Liquids, Solutions, Emulsions
- Mixer Type: Static
-
Supplier: Nordson EFD
Description: inverters that channel fluids from the walls of the mixer to the center of the plastic mixer and from center to walls. Features Shorter length than comparable spiral mixers Cost savings from reduced adhesive waste Improved service life compared to similar square
- Features: Adhesives Processing, Laboratory
- Media Type: Liquids, Solutions, Emulsions
- Mixer Type: Static
-
Description: Contra-rotating agitators coaxial agitators) serve for a large number of important basic operations in specific processes. They serve for rapid compensating and transport processes in fluid systems. The coaxial agitator principle is based on two separately operating drive systems normally
-
Supplier: Hangzhou Chinabase Machinery Co., Ltd.
Description: elevators, ball mills, hoisters, crushers, excavators, mixers, straighteners, cranes, etc.
- Features: Other
-
Supplier: Pump Solutions Group
Description: Neptune Mixer Company offers a complete line of Bung-Entering Drum Mixers. Two styles for water-like solutions use a folding propeller. Two styles (Series H & HGS) for viscous fluids use permanent blades and are offered in higher horsepowers. All Neptune Bung-Entering Drum
-
Supplier: KSB AG
Description: Design Horizontal submersible mixer with self-cleaning ECB propeller, closecoupled design, direct drive, explosion protection to ATEX II G2 T3 or T4. Applications Handling of municipal and industrial waste water and sludges, also in environmental engineering (biogas plants, etc.). Overview of
- Motor Power: 17.4228650037367 HP
- Operating Temperature: 104 F
- Operating Condition: Continuous Feed
- Features: Continuous Speed, Explosion Proof
-
Supplier: Sartorius Lab Instruments GmbH & Co. KG
Description: LevMixer® Drive Units: suitable for a large variety of mixing applications Multiple manufacturing sites for Flexel® 3D Bags: High supply ensurance The Palletank® Weighing for LevMixer® | Magnetic Mixer combined with Flexel® 3D mixing bag assemblies provides state-of-theart fluid
- Volume Capacity: 26.4172 gallons
- Diameter / Width: 33.4252149 inch
- Height: 43.0315193 inch
- Features: Other, Other Tank
-
Supplier: Brawn Mixer
Description: Brawn L and S series mixers are an economical solution for small volume applications. Additional bearing support in the S series provides longer life and additional versatility. These mixers are designed for use with water or water-like fluids in tank sizes up to 500 gallons.
- Motor Power: 0.33 HP
- Applications / Industry: Chemical Processing, Water / Wastewater Treatment
- Features: Continuous Speed, Rotor-Stator
- Market / Application Trigger: Industrial
-
Supplier: MXD Process
Description: This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. Features of our
- Capacity: 7.352430044970135 cubic feet
- Motor Speed: 0 to 3,000 rpm
- Motor Power: 0.75 HP
- Operating Condition: Batch Operation
-
Supplier: Pump Solutions Group
Description: Neptune Mixer Company offers a complete line of Bung-Entering Drum Mixers. Two styles for water-like solutions use a folding propeller. Two styles (Series H & HGS) for viscous fluids use permanent blades and are offered in higher horsepowers. All Neptune Bung-Entering Drum
-
Supplier: MXD Process
Description: This drum lid mounted mixer is optimized for mixing in standard 55-gallon drums, offering low shear agitation and blending of your process fluids. The carbon steel drum lid mounts securely to the drum with standard clamp rings commonly supplied with the 55-gallon drum. Features of our
- Capacity: 7.352430044970135 cubic feet
- Motor Speed: 350 to 1,750 rpm
- Motor Power: 0.333333333333333 HP
- Operating Condition: Batch Operation
-
Supplier: Sartorius Lab Instruments GmbH & Co. KG
Description: bottom port: Easy installation including preconnected bags and easy access to tubing Compatible with Magnetic Mixer and LevMixer® Drive Unit: suitable for a large variety of process applications Multiple manufacturing sites for Flexel® 3D Bags: High security of supply Palletank® with double
- Volume Capacity: 13.2086 gallons
- Diameter / Width: 24.015761 inch
- Height: 42.7165585 inch
- Pressure Rating: 217.55655 psi
-
Supplier: Cole-Parmer
Description: • Internal flex coupling protects motor from accidental shock loads on the shaft and impeller This general-purpose air-drive mixer is ideal for your laboratory needs. Mixer handles up to 100 liters of low-viscosity fluids or smaller volumes of higher viscosity
- Motor Speed: 30 to 1,800 rpm
- Motor Power: 0.03 HP
-
Supplier: Thermal Fluid Systems, Inc.
Description: Thermal Fluid Systems, Inc. is a designer and supplier of custom fluid filtration systems, for the efficient handling of the effects of thermal fluid degradation. Available in side-steam and full flow configurations. System components include filter, specially designed pumps,
- Application / Industry: Chemicals, Food and Beverage, Heat Transfer Fluids, Oil / Fuel, Paint / Coating, Paper and Pulp, Sanitary / Pharmaceutical, Waste / Sludge
-
Supplier: Cole-Parmer
Description: Heavy-duty, variable-speed mixer features a 1/4-hp motor for mixing any fluid with a viscosity up to 150,000 cp. This mixer includes a heavy-duty double clamp.
- Motor Speed: 50 to 500 rpm
- Motor Power: 0.25 HP
-
Supplier: EXACT Dispensing Systems
Description: and “B” materials directly into the mixer, so there is no chance of co-mingling until the fluids are actually in residence in the mixing chamber. Clean-up simply involves removing the mixer and wiping the manifold face clean. All nozzles have the same size bell inlet. Different
- Pressure Range: 270 to 500 psi
- Operating Condition: Batch Operation
- Features: Handheld, Industrial, Laboratory, Lined or Coated
- Mixer / Homogenizer Location: In-Line
-
Supplier: Pump Solutions Group
Description: Neptune's original line of gear-driven mixers for mixing heavy fluids and slurries or large batches of thin liquids. Features • Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available. • Universal indexing clamp allows most efficient
-
Supplier: Cole-Parmer
Description: Blade Design Mixers are best for low-viscosity (<1,500 Cp) fluids. The faster the fluid moves, the faster (and more thorough) the mixing. Great for mixing products into water or water-like fluids.
-
Supplier: Pump Solutions Group
Description: Neptune's premier line of small direct drive mixers for mixing small batches of low viscosity fluids. Features • Mounting ease. Clamp cannot slip, preventing propeller from hitting side of tank. • Quick, easy adjustment between "angled-on-center" and "angled-off-center" positions
Find Suppliers by Category Top
Featured Products Top
-
). Kalrez elastomers make the rotor/stator mixer suitable for use in extreme-duty processes with chemically aggressive fluids. All stainless steel construction, sanitary tri-clamp connections, 3A stamp, double mechanical seal, washdown motor and other options are also available. (read more)
Browse Industrial Mixers Datasheets for Charles Ross & Son Company -
out as a thin liquid that gradually becomes more viscous with the addition of solid raw materials and/or lowering of temperature. Some applications will reach a viscosity peak mid-processing and finish as a low-viscosity fluid. In all these stages, the mixer must be capable of delivering good turnover (read more)
Browse Industrial Mixers Datasheets for Charles Ross & Son Company -
direction and no flow in the opposite direction — ideal for flow control applications such as isolation of fluid sources in mixers, fluid contamination reduction, and preventing backflow in metered systems, to name just a few of the many uses across industries. Additionally (read more)
Browse Flow Orifices and Flow Restrictors Datasheets for O'Keefe Controls Co. -
Applications: • Centrifugal pumps • Compressors • Reactors and reaction vessels • Mixers and agitators (read more)
Browse Compression Springs Datasheets for Zhejiang Lisheng Spring Co., Ltd. -
equipment Material Handling: Conveyor systems and automated transfer lines Fluid Systems: Pumps and compressors requiring (read more)
Browse Flexible Couplings Datasheets for Chengdu Leno Machinery Co., Ltd. -
Mixing wet and dry ingredients in a ribbon blender requires an efficient and consistent method of raw material addition. This method depends on several factors including the properties of each liquid and solid component, how they interact, as well as the amount of fluid that needs to be added (read more)
Browse Industrial Mixers Datasheets for Charles Ross & Son Company -
Core Functions Transfer fluid or gas between stationary piping and rotating drums, rollers, or cylinders. Support heavy rotating components without additional (read more)
Browse Slip Rings Datasheets for JiuJiang Ingiant Technology Co., Ltd. -
, stuccos and grouts and fluids like those found in flocculators, sludge conveyors and other water treatment systems. EP Type - 1 Machine Applications: ⇒ Pulpers ⇒ Agitators (read more)
Browse Mechanical Seals Datasheets for Woodex MECO Industries -
areas of application for the ARN-6/-8-/10 series: » Pumps » Fans » Compressors » Generator and turbine drives » Axial and radial blowers » Paper-making machines and printing machines » Mixers, stirrers » Extruders (read more)
Browse Rigid Couplings Datasheets for jbj Techniques Limited -
Sealing Screws In Petrochemical Industries Fluid leakage is a significant, time-consuming, and costly problem for engineering teams in most factories. Fluid leakage problems need constant monitoring (read more)
Browse Screws Datasheets for ZAGO Manufacturing Company, Inc.
Conduct Research Top
-
Mixer Viscometry
at the vessel wall and vertical mixing of the fluid (Rai et al. 2000), with operating speeds generally within the range 30 - 100 rpm. In-situ rheological evaluation of food hatches, post mixing and prior to pumping, would facilitate improved process control. Use of mixer viscometry, where high
-
In Situ Rheological Monitoring of Viscous Nonnewtonian Fluids Using a Helical Ribbon Agitator
Mechanically degraded food fluids were modelled as Power law fluids in a pilot scale (42 l) helical ribbon agitation vessel. Effective rheological representative flow curves determined from speed/torque data proved comparable to off-line laboratory rheometer measured data. Modelling effective
-
The Art of High Shear Mixing
for applications that require immiscible fluids to be formulated into emulsions, or agglomerated powders to be dispersed into a liquid medium. Especially during the last decade, the emergence of new variations on the original rotor/stator mixer concept has extended the HSM's usefulness to more diverse
-
Liquid Mixing: Solid Challenges
This quick, one-time registration gives you access to members-only site benefits. Liquid mixing and blending would seem to be among the most straightforward of pharmaceutical manufacturing unit operations. Mechanical process mixers have been on the market for more than 100 years, and not much
-
High-Shear Mixing: Don't Fall Victim to Common Misconceptions
for applications that require immiscible fluids to be formulated into emulsions, or agglomerated powders to be dispersed into a liquid medium. Especially during the last decade, the emergence of new variations on the original rotor/stator mixer concept has extended the HSM's usefulness to more diverse
-
Interphex Preview, Part Deux
. The company, a certified ISO 9001 manufacturer of sanitary process equipment, will feature the newly redesigned Model C-CS, which offers longer diaphragm life and increased capacity. Mixer for Low-Shear, High-Purity Applications Booth 1119 The new Clean Sweep Mixer from . revolutionizes mixing technology
-
Interphex 2006 Preview: The Best of the Phex
to four different types in the same capsule), microtablets, tablets, liquids, or herbal products in either single or multiple doses and in all kinds of combinations. MixingSolutionsHere is an alliance of four independently-owned and operated companies Bematek, JDMix, Roplan and Sharpe Mixers
-
Liquid Mixing: Solid Challenges
pockets in liquids. During this process, known as cavitation, tiny, highly energetic bubbles implode, causing a nearly infinite number of tiny shock waves within the fluid. Instantaneous temperatures reach the 5,000 K range, which can be exploited for chemical catalysis. Thanks to cooling rates
More Information Top
-
Handbook of Industrial Mixing: Science and Practice Complete Document
… with rotating vessels; cylinders, drums, cubes, V and Y types, double cones Double ribbon mixers, trough blenders, vertical screw types, orbiting type such as Nauta Centrifugal mixers with paddles plows a High intensity mixer Turbine nd fluid mixers Motion by: Free fall …
-
Encyclopedia of Microfluidics and Nanofluidics
The device also contains a fluidic dye laser with external optical pumping, and a fluid mixer .
-
PVC: Production properties and uses
For this reason, and because the mo- tion even of solids in in this type of mixer may be likened to that of fluids, the term ' fluid mixer ' is possibly preferable.
-
Heat and Mass Transfer Intensification and Shape Optimization
Based on the structures of meshed network, we can propose novel designs of fluidic and thermal devices, such as fluid distributors, fluid mixers /reactors and plate type heat exchangers, all with distinctive flow equidistribution property.
-
Smart Baffle Placement for Chaotic Mixing
In this paper we consider the application of topological methods to the design of fluid mixers .
-
Perry's Chemical Engineers' Handbook, Eighth Edition > PHASE CONTACTING AND LIQUID-SOLID PROCESSING: AGITATION OF LOW-VISCOSITY PARTICLE SUSPENSIONS
Fluid mixers cut across almost every processing industry including the chemical process industry; minerals, pulp, and paper; waste and water treating and almost every individual process sector.
-
Composing chaos: An experimental and numerical study of an open duct mixing flow
Metcalfe G, Rudman M. Fluid Mixer . patent US 2004/0013034 A1; 2004.
-
Testing of a microanalysis system
An ex- ample is a static fluid mixer , which will be discussed later in de- tail.
Indicates content that may require registration and/or purchase.