-
Supplier: Accuris
Description: Hexagonal Steel Bars - Drawn Dimensions - Tolerance h 9 Aerospace Series
-
Supplier: Accuris
Description: Round Steel Bars - Drawn Dimensions - Tolerance h 9 Aerospace Series
-
Supplier: Accuris
Description: Tolerances Carbon Steel Bars
-
-
Supplier: SAE International
Description: This specification covers established inch/pound manufacturing tolerances applicable to carbon steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" is used to apply only to the higher figure of the specified
-
Supplier: Accuris
Description: Tolerances Low-Alloy Steel Bars
-
Supplier: SAE International
Description: This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive" is used to apply only to the higher figure of the
-
Supplier: SAE International
Description: This specification covers established manufacturing tolerances applicable to aluminum alloy drawn tubing ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.
-
Supplier: SAE International
Description: This specification covers established inch/pound manufacturing tolerances applicable to copper and copper alloy wire ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted.
-
Supplier: KOA Speer Electronics, Inc.
Description: Features Wide lineup from 01005 to 2512 size Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film Suitable for both flow and reflow solderings Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass
- Resistance Range: 1,000,000 to 10,000,000 ohms
- Tolerance: 0.5 to 1 +/- %
- Temperature Coefficient (TCR): 100 to 400 ±ppm/°C
- Power Rating: 0.030000000000000002 to 2 watts
-
Supplier: Utmel Electronic Limited
Description: CDRH Series 22 uH 30 % Tolerance 0.9 A Shielded Surface Mount Power Inductor
- Inductance Range: 22 microH
- DCR: 0.122 ohms
- Rated DC Current: 900 milliamps
- Operating Temperature: -40 C
-
Supplier: Newark, An Avnet Company
Description: INDUCTOR CERAMIC CORE WIRE WOUND 2.9 X 2.8 X 2.3MM,10% TOLERANCE, 2% TOLERANCE ROHS COMPLIANT: YES
-
Supplier: KOA Speer Electronics, Inc.
Description: Features Wide lineup from 01005 to 2512 size Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film Suitable for both flow and reflow solderings Products with lead-free terminations meet EU RoHS requirements. EU RoHS regulation is not intended for Pb-glass
- Resistance Range: 1,000,000 to 10,000,000 ohms
- Tolerance: 0.5 to 1 +/- %
- Temperature Coefficient (TCR): 100 to 400 ±ppm/°C
- Power Rating: 0.030000000000000002 to 2 watts
-
Supplier: ASAP Semiconductor LLC
Description: Thin Film ResistorSeries:TNPW; Resistance:49.9ohm; Resistance Tolerance:+/- 0.1 %; Power Rating:0....
- Resistance Range: 49.9 ohms
- Tolerance: 0.1 +/- %
- Technology / Construction: Thin Film
-
Description: Description / Abstract Foreword This Standard is a revision of American National Standard Dimensional Tolerances for Aluminum Mill Products issued in 2009 (ANSI H35.2-2009). The tolerances included in this Standard were developed by the Technical Committee of The Aluminum Association.
-
Supplier: Newark, An Avnet Company
Description: 44B9202-X-9 DELIVERY TOLERANCE -10% +10%
-
Supplier: ASAP Semiconductor LLC
Description: Thick Film Chip ResistorSeries:CRCW; Resistance:64.9ohm; Resistance Tolerance:+/- 1%; Power Rating...
- Resistance Range: 64.9 ohms
- Tolerance: 1 +/- %
- Technology / Construction: Thick Film
-
Supplier: ASAP Semiconductor LLC
Description: Thick Film Chip ResistorSeries:CRCW; Resistance:54.9kohm; Resistance Tolerance:+/- 1%; Power Ratin...
- Tolerance: 1 +/- %
- Technology / Construction: Thick Film
-
Supplier: ASAP Semiconductor LLC
Description: Thick Film Chip ResistorSeries:CRCW; Resistance:54.9ohm; Resistance Tolerance:+/- 1%; Power Rating...
- Resistance Range: 54.9 ohms
- Tolerance: 1 +/- %
- Technology / Construction: Thick Film
-
Supplier: KOA Speer Electronics, Inc.
Description: Features Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film High stability and high reliability with the triple-layer structure of electrode
- Resistance Range: 1,000,000 to 10,000,000 ohms
- Tolerance: 0.5 to 1 +/- %
- Temperature Coefficient (TCR): 100 to 300 ±ppm/°C
- Power Rating: 0.030000000000000002 to 2 watts
-
Description: and drawn pipe to harmonize with ANSI/ASME standard; clarification on tolerance calculation for wall thickness (eccentricity) of extruded tube; and clarifications to table headings and footnotes.
-
Supplier: Newark, An Avnet Company
Description: FLAT CHIP RESISTORS, 15.8 K OHMS, 0.1% TOLERANCE
-
Supplier: Hyperion Materials & Technologies
Description: Dental bur pellet blanks for brazing to stainless steel shank. Available in select diameters (1.6 - 3.2 mm) and lengths (2.2 - 8.1 mm). Standard cemented carbide grade is H10F.
-
Supplier: Win Source Electronics
Description: Manufacturer: TXC CORPORATION Win Source Part Number: 800971-9H03200031 Packaging: Reel Type: kHz Crystal (Tuning Fork) Mounting Style: SMD Frequency: 32.768kHz ESR (Equivalent Series Resistance): 70 kOhms Frequency Tolerance: ±20ppm Load Capacitance: 12.5pF Operating Mode: Fundamental
- Oscillation Frequency: 0.032768 MHz
- Frequency Tolerance: 20 %
- Load Capacitance: 12.5 pF
- Max ESR: 70,000 ohms
-
Supplier: Win Source Electronics
Description: Manufacturer: TXC CORPORATION Win Source Part Number: 803924-9H03200030 Packaging: Reel Type: kHz Crystal (Tuning Fork) Mounting Style: SMD Frequency: 32.768kHz ESR (Equivalent Series Resistance): 90 kOhms Frequency Tolerance: ±20ppm Load Capacitance: 12.5pF Operating Mode: Fundamental
- Oscillation Frequency: 0.032768 MHz
- Frequency Tolerance: 20 %
- Load Capacitance: 12.5 pF
- Max ESR: 90,000 ohms
-
Supplier: Newark, An Avnet Company
Description: RESISTOR, HERMETICALLY SEALED METAL FILM, 10K OHMS, 0.1% TOLERANCE
-
Supplier: Peptides International, Inc.
Description: cyclo (Leu-Gly) (M.W. 170.21 ) C8H14N2O2 [5845-67-0] R. Walter, R. Ritzmann, H.N. Bhargava, and L.B. Flexner, Proc. Natl. Acad. Sci. USA, 76, 518 (1979). (Original)
-
Description: Ondrives.US produces instrument quality, precision ground steel shafts and dowel pins in many materials, diameters, and lengths. Most precision shafts are available for same day shipment. Offered in 3 variations. This is a general purpose, non magnetic stainless steel. It may show slight magnetism
- Shaft Diameter or Width: 4.762497428251389 mm
- Shaft Diameter: 4.762497428251389 mm
- Additional Operations: Chamfered End, Precision Ground
- Features: Precision Grade
-
Description: ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
-
Supplier: Utmel Electronic Limited
Description: DR Series 100 uH ±20 % Tolerance 1.96 A Shielded SMT High Power Inductor
- Inductance Range: 100.00000000000001 microH
- DCR: 0.163 ohms
- Rated DC Current: 1,960 milliamps
- Operating Temperature: -40 C
-
Supplier: CSA Group
Description: Is valid for the short taps specified in ISO 529 as well as for any other kind of ground thread taps with the same diameters and pitches. The internal threads produced with those taps are conventionally designated by the simplified denomination of "nut" in agreement with the word used in ISO 965
-
Description: Is valid for the short taps specified in ISO 529 as well as for any other kind of ground thread taps with the same diameters and pitches. The internal threads produced with those taps are conventionally designated by the simplified denomination of "nut" in agreement with the word used in ISO 965
-
Description: CIE 176:2006 ISBN 978 3 901906 53 4 In this publication the recommendations of the CIE Division 2 "Physical Measurement of Light and Radiation" are given on the definition of geometries for the measurement of the colour of materials and the tolerances around those fundamental definitions that
-
Supplier: Texas Instruments
Description: Single Output LDO, 100mA, Fixed(2.9V), Shutdown, 1.25% Tolerance 5-SOT-23 -40 to 125
- Regulated Output Voltage (Volt): 2.9 volts
- Output Current (IOUT): 0.1 amps
- Dropout Voltage (VD): 0.2 volts
- Quiescent Current (IQ): 0.0006 amps
-
Supplier: Texas Instruments
Description: Single Output LDO, 100mA, Fixed(2.9V), Shutdown, 0.75% Tolerance 5-SOT-23 -40 to 125
- Regulated Output Voltage (Volt): 2.9 volts
- Output Current (IOUT): 0.1 amps
- Dropout Voltage (VD): 0.2 volts
- Quiescent Current (IQ): 0.0006 amps
-
Supplier: Utmel Electronic Limited
Description: 0603 15 pF 50 V ±10 % Tolerance NP0 SMT Multilayer Ceramic Capacitor
- Capacitance Range: 0.000015 microF
- Capacitance Tolerance: 10 (+/- %)
- DC Rated Voltage Range (WVDC): 50 volts
- Operating Temperature: -55 C
Find Suppliers by Category Top
Featured Products Top
-
in under two minutes, significantly reducing maintenance downtime compared to traditional keyed systems. The design accommodates standard shaft tolerances from h6 to h9, eliminating the need for precision-ground shafts. Visual torque indicators provide immediate confirmation of proper installation, removing guesswork from the assembly process. Technical Specifications: Holding Torque: Up to 850 Nm (size-dependent). Runout Accuracy: Maintained within 0.05 mm TIR. Cycle Life: 100,000+ duty cycles... (read more)
Browse Shaft-Hub Locking Devices Datasheets for Chengdu Leno Machinery Co., Ltd.
More Information Top
Indicates content that may require registration and/or purchase.
-
Robotic drilling system for titanium structures
The dimen- sional accuracy of drilled holes in both Ti alloy and Al alloy materials is within H9 tolerance .
-
Kefir yeasts enhance probiotic potentials of Lactobacillus paracasei H9: the positive effects of coaggregation between the two strains.
This study investigated pure Lactobacillus paracasei H9 tolerance to simulated gastrointestinal juices and adhesion to intestinal mucosa cells without yeasts, with viable yeasts (VY) and with different pretreated yeasts.
-
The Engineering Approach to Winter Sports
To make them a standard material is chosen by FIBT and is supplied as polished round bars with a diameter of 16 mm ( h9 tolerance class) and a length of 1000 mm, 0/+50 mm.
-
Extending the life of bolt joints with radial clearance
… alloy with a hard anode oxide coating are inserted in a D16T aluminum alloy sample (width 50 mm); the clearance ψ = 0.4 and 1.2%, which is typ ical for airplane frames when inserting standard bolts in holes with H9 tolerance .
-
Jigs and Fixtures, Third Edition > Indexing Devices
A drilled hole usually measures within H11 tolerance range, more than H9 tolerance of a milled slot.
-
CR4 - Thread: Hard Ball vs a Reamer
Drilling is quite rough process ( H9 tolerance ), reaming (H7 or H8), grinding (H6) and honing (H5).
-
Tolerance rings [motor-overload protection]
In a typical electric motor bearing mount with Alumina housing, 608 bearing, H9 tolerance on the bore, and a tem- perature range of 20-100 °C, an HVL22x7SS tolerance ring with a 0.33 mm wave height would be used, giving a …