Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: OMEGA Engineering, Inc.
Description: OMEGA’s RHCN-3 is an economical relative humidity controller. The probe uses a thin film polymer capacitive sensor which may be mounted thousands of feet from the controller box. The RHCN-3 has a standard 10 mV/%RH or 50 mV/%RH (internally selectable) recorder output,
- Accuracy: 3 ±% FS
- Control Signal Output: Switch / Relay Output
- Control Technique: Limit / Set Point Control
- Controller Inputs: DC Voltage Input
-
Supplier: Honeywell Sensing & IoT
Description: , automated pick and place manufacturing, eliminating lead misalignment to printed circuit board through-hole. The HIH-5030/5031 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or
- Digital Outputs: Other
- Electrical Outputs: Analog Voltage
- Form Factor: Sensor / Probe
- Operating Temperature: -40 to 185 F
-
Supplier: Honeywell Sensing & IoT
Description: , automated pick and place manufacturing, eliminating lead misalignment to printed circuit board through-hole. The HIH-5030/5031 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or
- Digital Outputs: Other
- Electrical Outputs: Analog Voltage
- Form Factor: Sensor / Probe
- Operating Temperature: -40 to 185 F
-
-
Supplier: Honeywell International, Inc.
Description: -CONDENSING) HUMIDITY RATING 20 GAUGE CABLE WITH SIX 8 INCH LEAD WIRE ELECTRICAL CONNECTION DETAILS SPST SWITCHING ACTION RESPONSE TIME 1 MINUTE SENSOR RANGE 0 TO 2000 PPM ADJUSTABLE C7232 MODEL
- Control Signal Output: Analog Voltage, Current Loop
-
Supplier: Honeywell Sensing & IoT
Description: , automated pick and place manufacturing, eliminating lead misalignment to printed circuit board through-hole. The HIH-5030/5031 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or
- Digital Outputs: Other
- Electrical Outputs: Analog Voltage
- Form Factor: Sensor / Probe
- Operating Temperature: -40 to 185 F
-
Supplier: Honeywell Sensing & IoT
Description: , automated pick and place manufacturing, eliminating lead misalignment to printed circuit board through-hole. The HIH-5030/5031 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users. Direct input to a controller or
- Digital Outputs: Other
- Electrical Outputs: Analog Voltage
- Form Factor: Sensor / Probe
- Operating Temperature: -40 to 185 F
-
Description: : Precise humidity measurement Easy to integrate Fully calibrated Module with external sensor available Very low drift due to wide sensor area PCB moisture protected Various analog output signals The analog IST AG LinPicco module is suitable for applications where a fast, simple
- Control Signal Output: Analog Voltage, Current Loop
- Form Factor: Circuit Board
- Media: Gas / Air
- Number of Control Outputs: 1 outputs
-
Supplier: Hydrofarm, Inc.
Description: The RHC Relative Humidity Controller is our most recent development in total humidity control. It is switchable between humidify and dehumidify. The RHC has a built- in onboard sensor which is accurate within +/- 5% with a set differential of 5%. Perfect for plant
-
Environmental Test Chambers and Rooms - Temperature and Humidity Test Environmental Climatic ChamberSupplier: Haida International Equipment Co., Ltd.
Description: range: 20~98%RH (Refer Image below) Internal dimension (W*D*H): 400*500*500mm External dimension (W*D*H): 600*1080*1380mm Controller: LCD touch screen, programmable control temperature and humidity Application Industry: 1. Electronic products
- Configuration: Floor Mount
- Features: Programmable
- Humidity Range: 20 to 98 % RH
- Temperature Control: Heating, Cooling
-
Supplier: Richardson RFPD
Description: HM1500LF Relative Humidity Module Based on the rugged HS1101LF capacitive humidity sensor,HM1500LF is a dedicated humidity transducer designed for OEMapplications where a reliable and accurate measurement is needed.Direct interface with a micro-controller is
- Form Factor: Sensor / Probe
-
Supplier: Embedded Data Systems
Description: Sensor for Simultaneous Temperature and Humidity Logging • Capacitive Polymer Humidity-Sensing Element • Hydrophobic Filter Protects Sensor Against Dust, Dirt, Moisture, and Contaminants • Sampling Rate from 1s up to 273hrs • Programmable Recording Start
- Operating Temperature: -20 to 85 C
- Sensor Type: Temperature Sensor, Humidity Sensor
-
Supplier: Embedded Data Systems
Description: Simultaneous Temperature and Humidity Logging • Capacitive Polymer Humidity-Sensing Element • Hydrophobic Filter Protects Sensor Against Dust, Dirt, Moisture, and Contaminants • Sampling Rate from 1s up to 273hrs • Programmable Recording Start Delay After
- Operating Temperature: -20 to 85 C
- Sensor Type: Temperature Sensor, Humidity Sensor
-
Supplier: Hydrofarm, Inc.
Description: The RHC Relative Humidity Controller is our most recent development in total humidity control. It is switchable between humidify and dehumidify. The RHC has a built- in onboard sensor which is accurate within +/- 5% with a set differential of 5%. Perfect for plant
-
Supplier: Haida International Equipment Co., Ltd.
Description: External chamber: material Stainless steel Cooling method: Air cooling Controller: LCD touch screen, programmable control temperature and humidity,Can set different parameter for cyclic test Insulation material: 50mm high density rigid Polyurethane foam
- Configuration: Floor Mount
- Features: Programmable
- Humidity Range: 20 to 98 % RH
- Temperature Control: Heating, Cooling
-
Supplier: Haida International Equipment Co., Ltd.
Description: Programmable constant temperature humidity chamber is a reliability and efficiency environment test chamber which satisfies the test requirements.the PLC controller can accurately controller the constant temperature and humidity level by the simple
- Configuration: Floor Mount
- Features: Programmable
- Humidity Range: 20 to 98 % RH
- Temperature Control: Heating, Cooling
-
Supplier: Richardson RFPD
Description: . Direct interface with amicro-controller is made possible with the module for humidity andtemperature digital outputs. These low power sensors are designed forhigh volume and cost sensitive applications with tight space constraints. Every sensor is individually
- Form Factor: Sensor / Probe
-
Supplier: OMEGA Engineering, Inc.
Description: The HX71 Series relative humidity sensor/transmitter provides a reliable and economical method for most relative humidity monitoring applications. The compact design is ideal for wall or duct mounting. Each unit is factory calibrated to provide excellent sensitivity, fast
- Compensation: Temperature Compensated
- Electrical Outputs: Analog Current, Analog Voltage
- Operating Temperature: -13 to 185 F
- Relative Humidity Accuracy: 3.5 %
-
Supplier: Parameter Generation & Control, Inc.
Description: ) Minimum air temperature of 15°C (with RH control) Maximum air temperature of 30°C Maximum dew point of 25°C Minimum dew point of 8°C Temperature and relative humidity tolerance will adhere to International Conference on
- Chamber Capacity: 30 cubic feet
- Configuration: Reach-In, Laboratory / Room
- Features: Chart Recorder, Humidity Control, Lights, Programmable, Shelves, Windows
- Humidity Range: 35 to 70 % RH
-
Supplier: OMEGA Engineering, Inc.
Description: The wiSeries 1/8 DIN Panel Meter & Controller can monitor up to eight (8) wireless sensors. The compact instrument connects directly to an Ethernet network and the Internet and features OMEGA’s award-winning embedded Web Server. It is easily configured and
- Accuracy: 1 ±% FS
- Control Signal Output: Analog Voltage, Current Loop, Switch / Relay Output, Serial / Digital
- Control Technique: Limit / Set Point Control, Linear Control
- Controller Inputs: Network / Fieldbus Input
-
Supplier: Cubic Sensor and Instrument Co.,Ltd.
Description: INTRODUCTION AM6108 HVAC system controller is with built-in IAQ sensor modules, which integrated NDIR CO2 sensor, laser PM2.5 sensor, HVAC indoor air quality sensor. It can monitor and display indoor CO2 concentration, PM1.0 PM2.5 PM10 concentration, HCHO,
- Control Signal Output: Analog Voltage, Serial / Digital
- Control Technique: Linear Control, PID Control
- Controller Inputs: DC Voltage Input
- Form Factor: Other
-
Supplier: Hydrofarm, Inc.
Description: Control humidity automatically and accurately with Green Air Products Total Humidity Controller. The THC can be switched between humidify and dehumidify for removing unwanted atmospheric moisture accumulating within an enclosed area or to add needed moisture to the
-
Supplier: Hydrofarm, Inc.
Description: Precise temperature and RH sensors. Day and night setpoints. Can cool, heat, humidify, dehumidify.
-
Supplier: Cubic Sensor and Instrument Co.,Ltd.
Description: DESCRIPTION Dual beam with better accuracy and high stability NDIR CO2 sensor module CM1107 is mainly used to detect CO2 concentration by adopting non-dispersive infrared (NDIR) technology. It is widely used for home HVAC system, HVAC controller, air conditioner, agricultural
- Electrical Outputs: Analog Voltage, Analog Current
- Measurement Type: %LEL, %Volume
- Number of Gases Sensed: Single Gas
- Operating Humidity: 0.0 to 95 %
-
Supplier: Haida International Equipment Co., Ltd.
Description: ) Direct water supply connection for continuous operation (supply tank optional) 8) Accurate wet/dry-bulb humidity measurement system that is to maintain (solid-state sensor may be substituted at no charge) 9) Large glass window design which easy to view the inner condition at any time
- Configuration: Walk-In
- Humidity Range: 40 to 85 % RH
- Temperature Control: Heating, Cooling
- Temperature Range: 20 to 80 C
-
Supplier: BINDER Inc.
Description: display of process parameters Real time clock Electronically controlled humidification and dehumidification system with capacitive humidity sensor Suitable for stability tests according to ICH guideline Q1A Inner glass door with sealing Independent
- Chamber Capacity: 24.7 cubic feet
- Configuration: Floor Mount, Reach-In
- Features: Alarm(s), Chart Recorder, Humidity Control, Lights, Programmable, Shelves
- Humidity Range: 10 to 90 % RH
-
Supplier: BINDER Inc.
Description: display of process parameters Real time clock Electronically controlled humidification and dehumidification system with capacitive humidity sensor Suitable for stability tests according to ICH guideline Q1A Inner glass door with sealing Independent
- Chamber Capacity: 8.5 cubic feet
- Configuration: Floor Mount, Reach-In
- Features: Alarm(s), Chart Recorder, Humidity Control, Lights, Programmable, Shelves
- Humidity Range: 10 to 90 % RH
-
Supplier: BINDER Inc.
Description: display of process parameters Real time clock Electronically controlled humidification and dehumidification system with capacitive humidity sensor Suitable for stability tests according to ICH guideline Q1A Inner glass door with sealing Independent
- Chamber Capacity: 4.1 cubic feet
- Configuration: Floor Mount, Reach-In
- Features: Alarm(s), Chart Recorder, Humidity Control, Lights, Programmable, Shelves
- Humidity Range: 10 to 90 % RH
-
Supplier: STEGO
Description: The electronic DC hygrostat with integrated switch module is used to control heating and cooling equipment, filter fans or signal devices through the relay. The hygrostat measures the relative humidity and can switch a signal current via an internal relay. The external
- Control Signal Output: Switch / Relay Output
- Control Technique: Limit / Set Point Control
- Form Factor: DIN Rail
- Media: Gas / Air
-
Supplier: PCE Instruments / PCE Americas Inc.
Description: The use of a microwave moisture meter, as opposed to a humidity sensor, provides a very consistent and high product quality while reducing operating and maintenance costs. When connected to a controller or a process control system, the operator has the opportunity
- Digital Outputs: Serial Interface
- Electrical Outputs: Analog Current
- Form Factor: Sensor / Probe
- Operating Temperature: -4 to 176 F
-
Supplier: Conviron
Description: The CMP6050 is the most advanced control system developed by Conviron. Configured to your chamber specifications from the factory, the CMP6050 offers a wide array of set-up, control, and alarm features to fine tune the configuration to your specific requirements. The scalability of the
- Control Technique: Limit / Set Point Control
- Form Factor: Panel / Chassis Mount
- General: Datalogger, Chart Recorder
- Media: Gas / Air
-
Supplier: Roscid Technologies
Description: The H-STAT is a low voltage microprocessor based humidistat ideal for controlling humidification and dehumidification in both residential and commercial applications. It offers an optional temperature sensor used to lower the humidity set point to prevent condensation
- Accuracy: 2 ±% FS
- Form Factor: Panel / Chassis Mount
- Media: Gas / Air
- Multi-Function Controller: Yes
-
Supplier: OMEGA Engineering, Inc.
Description: The HX94A relative humidity/ temperature transmitter provides a reliable and low cost method for duct or wall mount monitoring applications. Solid state sensors provide excellent sensitivity, fast response, and stability. Simple hookup and linearized output permit
- Mounting: Other
- Output: Analog Current (e.g., 4-20 mA), Analog Voltage
- Reference Material: Platinum
- Reference Resistance: 100 Ohms
-
Supplier: Automation24, Inc.
Description: The DST-2421-C10 ultrasonic level sensor from APG sensors paired with a DCR-1006A controller provides a simplified stand-alone level measurement and control system. The sensor can be remotely located up to 2000 feet away from the controller with no signal
- Device Classification: Sensor System
- Measuring Range: 12 to 300 inch
- Meter Technology: Ultrasonic / Sonic
-
Supplier: Automation24, Inc.
Description: The DST-3431-C10 ultrasonic level sensor from APG sensors paired with a DCR-1006A controller provides a simplified stand-alone level measurement and control system. The sensor can be remotely located up to 2000 feet away from the controller with no signal
- Device Classification: Sensor System
- Measuring Range: 15 to 600 inch
- Meter Technology: Ultrasonic / Sonic
-
Supplier: InspectorTools
Description: Hygrometer mode it uses a solid state capacitive sensor RH probe to give accurate and fast relative humidity and temperature readings. While being easy and uncomplicated to operate the TR210 has a powerful micro controller, which processes the information
-
Supplier: Edgetech Instruments Inc.
Description: Edgetech Instruments field-proven chilled mirror technology. One, two or three stage sensors available - integral or remote from controller. NIST traceable calibration certificate. Depression range choice of either 45, 65 or 95°C . (one, two or three-stage cooling
- Dew Point Accuracy: 0.3600 +/-F
- Dew Point Range: -40 to 140 F
- Display: Digital Readouts
- Form Factor: Analyzer, Instrument
-
Supplier: Viconics Technologies Inc.
Description: Smart energy management has never been easier than with the Viconics VT7600 series roof top and heat pump wall mounted temperature controllers. Designed for both new construction or retrofit projects, the controllers dramatically decrease project delivery costs by reducing
- Controller Inputs: Serial / Digital Input
- Form Factor: Panel / Chassis Mount
- Media: Gas / Air
- Special Capabilities (if required): HVAC Controller
-
Supplier: Viconics Technologies Inc.
Description: a digital display and built-in commissioning and configuration utility, temperature sensor and optional humidity and passive infra red occupancy sensor. No previous building automation training is required for the easy installation and
- Form Factor: Panel / Chassis Mount
- Media: Gas / Air
- Special Capabilities (if required): HVAC Controller
- User Interface: Digital Front Panel
-
Supplier: Viconics Technologies Inc.
Description: 7600F Controller features an easy-toread digital display and built-in commissioning and configuration utility, temperature sensor, optional humidity sensor and optional passive infra red occupancy sensor (PIR) cover. Open protocol design
- Form Factor: Panel / Chassis Mount
- Media: Gas / Air
- Special Capabilities (if required): HVAC Controller
- User Interface: Digital Front Panel
-
Supplier: Viconics Technologies Inc.
Description: control, increased efficiency and a more comfortable environment. This wall-mounted controller features an easy-to-read digital display and built-in commissioning and configuration utility, temperature sensor and optional humidity and passive
- Control Technique: PID Control
- Form Factor: Panel / Chassis Mount
- Media: Gas / Air
- Special Capabilities (if required): HVAC Controller
-
Supplier: Parameter Generation & Control, Inc.
Description: . Parameter’s humidity generating systems are unique. By utilizing the two temperature method of control, Parameter is able to create an unrivaled stable environment. Three parameters must be considered to meet key specifications: control constancy, chamber uniformity and sensor
- Configuration: Reach-In, Laboratory / Room
- Features: Alarm(s), Humidity Control, Programmable, Windows
- Humidity Range: 35 to 80 % RH
- Temperature Control: Heating, Cooling
-
Supplier: PCE Instruments / PCE Americas Inc.
Description: The use of a microwave moisture meter, as opposed to a humidity sensor, provides a very consistent and high product quality while reducing operating and maintenance costs. When connected to a controller or a process control system, the operator has the opportunity
- Digital Outputs: Serial Interface
- Electrical Outputs: Analog Current
- Form Factor: Sensor / Probe
- Operating Temperature: -4 to 176 F
-
Supplier: CO2Meter.com
Description: CO2 levels are used to maximize plant growth. Features Controls up to 2 zones (for small or large facilities) User configurable to control a CO2 tank and regulator Built-in temperature, humidity, and light sensors Customize your
- Features: Controller
- Measurement Type: Trace
- Operating Temperature: -4 to 140 F
-
Supplier: Win Source Electronics
Description: Manufacturer: Parallax Inc. Storage Condition: Dry storage cabinet & Humidity protection package Win Source Part Number: 1199861-28138 Operating Supply Voltage: 5 V Interface: Serial, USB Weight: 453.59237 g Categories: Embedded Processors and Controllers
- Features: RoHS Compliant
- Supply Voltage: Other
-
Supplier: Honeywell International, Inc.
Description: 4-13/32 INCH WIDTH X 2-15/16 INCH DEPTH X 8-5/32 INCH HEIGHT SIZE 50/60 HERTZ FREQUENCY RATING +/- 1 PERCENT ACCURACY UL, UL (CANADA AND US), CE, C-TICK APPROVAL COMMERCIAL, AGRICULTURAL APPLICATION 24/120/240 VOLT AC VOLTAGE RATING
- Control Signal Output: Analog Voltage, Current Loop
- Form Factor: Panel / Chassis Mount, Other
- Standards and Compliance: Other
-
Supplier: Ebac Industrial Products, Inc.
Description: cooling and two steps of heating. The control unit contains three modules:- MODULE 1 (TEMPERATURE / HUMIDITY CONTROL) The temperature control is a solid state cotrol system which enables a set temperature to be selected for the conditioned space and that temperature
Find Suppliers by Category Top
Featured Products Top
-
environment. Thus, by monitoring the change in capacitance, relative humidity can be derived. IST thin film capacitive relative humidity sensors are capable of measuring 0 to 100% relative humidity and operating at temperature ranges of -80°C to +190°C. The humidity sensor (read more)
Browse Humidity Controllers Datasheets for Innovative Sensor Technology IST USA Division -
application have significant impact on the long term stability of the components. Humidity sensors are challenged to provide stable signals and reproducible information especially when operated in very high or extreme low humidity conditions, temperature cycling or when exposed to aggressive (read more)
Browse Humidity Controllers Datasheets for Innovative Sensor Technology IST USA Division -
Thermalogic offers a multitude IoT capable temperature, humidity and other process controls, sensors and transmitters. Our expertise can help you design a system to monitor and configure your device remotely, saving you overall time and labor. Communication options available with our (read more)
Browse Temperature Controllers Datasheets for Thermalogic Corporation -
When it comes to temperature, humidity and process controls and sensors, Thermalogic can build what you need from our extensive control, sensor and transmitter design platforms. Chances are, we’ve probably designed, engineered and manufactured something similar in the past. You can explore (read more)
Browse Humidity Controllers Datasheets for Thermalogic Corporation -
What sensors are used in HVAC systems? Heating, ventilation, and air conditioning (HVAC) systems in homes, schools and office buildings commonly use carbon dioxide sensors to monitor and control indoor air quality. However, additional sensors can also be used such as (read more)
Browse HVAC Controllers Datasheets for CO2Meter.com -
Temperature Sensors: Built to order RTD, thermistor, and thermocouple probe assemblies. HumiSense®: Relative Humidity Transmitters (both analog and (read more)
Browse Temperature Controllers Datasheets for Thermalogic Corporation -
Thermalogic: Over 50 years of built to order controls and sensors, with satisfied customers at every turn. At Thermalogic, we design, engineer and manufacture electronic temperature, humidity and process controls and (read more)
Browse Temperature Controllers Datasheets for Thermalogic Corporation -
order controls and sensors, with satisfied customers at every turn. At Thermalogic, we design, engineer and manufacture electronic temperature, humidity and process controls and sensors — so you can have the built-to-spec accuracy and reliability you need. Since 1971, we have been (read more)
Browse Temperature Controllers Datasheets for Thermalogic Corporation -
multiple sensors, Thermistor RTD (2,3 or 4 Wire) Thermocouple Digital or logic Voltage Current Resistance Dry Contact via switch or relay Frequency Diode Humidity Infrared (read more)
Browse Temperature Controllers Datasheets for Thermalogic Corporation -
Auxiliary alarms and special functions Time functions available Custom programming available General Options Single or multiple zone I (read more)
Browse Temperature Controllers Datasheets for Thermalogic Corporation
Conduct Research Top
-
What Is The Industrial Internet Of Things?
: devices, data, and connectivity. The "things," or devices, are often equipped with small controller boards (such as the Photon or Electron board from Particle) and embedded sensors that are capable of detecting conditions in the surrounding environment or in the devices themselves. IoT devices
More Information Top
-
CR4 - Thread: Temperature/Humidity Sensor/Controller
Temperature/ Humidity Sensor / Controller .
-
temperature&humidity controller - offers from temperature&humidity controller manufacturers, suppliers, exporters & wholesalers
NTC Sensor Temperature Humidity Controller YK-302 .
-
CR4 - Thread: Humidity Meter for Running Fabric
Next in Forum: Temperature/ Humidity Sensor / Controller .
-
CR4 - Thread: Axial Probe Setting
Previous in Forum: Temperature/ Humidity Sensor / Controller .
-
Temperature Sensor - Temperature Sensor Manufacturers, Suppliers
NTC Sensor Temperature Humidity Controller YK-302 .
-
temperature sensor - offers from temperature sensor manufacturers, suppliers, exporters & wholesalers
NTC Sensor Temperature Humidity Controller YK-302 .
-
Developing Index Maps of Water-Harvest Potential in Africa William P. Clement
… and high price resulted from the traditional central computer control, and with the aid of advanced SCM technique and high precision high reliability humidity sensitive and temperature sensitive device, the advanced digitalized "intelligent temperature- humidity sensors and controller " and the DNCS …