-
Supplier: Haskel International LLC
Description: H-Drive, Haskel’s new generation of hydraulically driven gas boosters, is designed to safely handle a wide range of critical, high-pressure gas compression and transfer needs, at high rates and pressures for the most demanding of applications. Simple and proven design is
- Maximum Discharge Pressure: 3,200 to 13,050 psi
- Power Source: Air / Pneumatic
- Pump Type: Booster Pumps
-
Supplier: SC Hydraulic Engineering Corporation
Description: two-stage configurations. The gas boosters are used to intensify a variety of gases including argon, helium, nitrogen, and hydrogen. Some common uses with a booster or booster system are to scavenge bottled gases once the pressure has fallen below operational
- Maximum Discharge Pressure: 9,000 psi
- Discharge Size: 0.25 inch
- Power Source: Air / Pneumatic
- Pump Type: Booster Pumps
-
Supplier: Universal Air & Gas Products Corp.
Description: gases, fuel gases and many process gases. Both ambient intake and booster compressors are available in both lubricated and non-lubricated, rotary and reciprocating designs. Electric, diesel, gas and hydraulic drives are applied as required with simple or comprehensive control
- Discharge / Operating Pressure: 35,000 psi
- Flow Capacity: 5 to 2,600 SCFM
- Horse Power: 1 to 500 HP
- Power Source: AC Single Phase, AC Three Phase, Diesel, Gasoline, Hydraulic
-
-
Supplier: Harwood Engineering Company
Description: The DA-7 gas booster is designed for 100,000 psi max service. The low pressure (2,000 psi max) drive equipment consists of oil reservoir, electric motor and pump, pressure regulating valve, directional control valve, driving pressure indicating gage, a differential filtering system and
- Outlet Pressure: 100,000 psi
- Features & Approvals: Compressor Included
- Generator Type: Hydrogen
- Features: Specialty / Other
-
Supplier: Universal Air & Gas Products Corp.
Description: gases, fuel gases and many process gases. Both ambient intake and booster compressors are available in both lubricated and non-lubricated, rotary and reciprocating designs. Electric, diesel, gas and hydraulic drives are applied as required with simple or comprehensive control
- Discharge / Operating Pressure: 35,000 psi
- Flow Capacity: 5 to 2,600 SCFM
- Horse Power: 1 to 500 HP
- Power Source: AC Single Phase, AC Three Phase, Diesel, Gasoline, Hydraulic
-
Supplier: Haskel International LLC
Description: the Electric Servo Drive Unlike Haskel hydraulic and pneumatic driven gas boosters, Q-Drive is powered by an electric servo drive motor. The motor’s rotation creates linear actuation, providing greater process control and high-precision movement. The combination of two proven
- Inlet / Suction Pressure: 75 to 6,600 psi
- Discharge / Operating Pressure: 1,100 to 6,000 psi
- Flow Capacity: 20 to 32 SCFM
- Gases Handled: Air / Plant Air, Argon, Carbon Dioxide (CO2), Helium, Natural Gas / Methane, Nitrogen (N2), Oxygen (O2)
-
Supplier: MAXPRO Technologies, Inc.
Description: booster manual vent valve for venting gas pressure prior to disconnecting outlet line drive air/nitrogen connection is 1/2" FNPT gas outlet connection is 1/4" FNPT for air driven version, gas inlet connection is 1/4" FNPT for air driven version, an air filter is included
- Bore Size - LP Inlet: 0.25 inch
- Bore Size - HP Outlet: 0.25 inch
- Fluid Compatibility: Gas
- Technology Type: Pneumatic
-
Supplier: MAXPRO Technologies, Inc.
Description: booster manual vent valve for venting gas pressure prior to disconnecting outlet line drive air/nitrogen connection is 1/2" FNPT gas outlet connection is 1/4" FNPT for air driven version, gas inlet connection is 1/4" FNPT for air driven version, an air filter is included
- Bore Size - LP Inlet: 0.25 inch
- Bore Size - HP Outlet: 0.25 inch
- Fluid Compatibility: Gas
- Technology Type: Pneumatic
-
Supplier: MAXPRO Technologies, Inc.
Description: booster manual vent valve for venting gas pressure prior to disconnecting outlet line drive air/nitrogen connection is 1/2" FNPT gas outlet connection is 1/4" FNPT for air driven version, gas inlet connection is 1/4" FNPT for air driven version, an air filter is included
- Bore Size - LP Inlet: 0.25 inch
- Bore Size - HP Outlet: 0.25 inch
- Fluid Compatibility: Gas
- Technology Type: Pneumatic
-
Supplier: MAXPRO Technologies, Inc.
Description: booster manual vent valve for venting gas pressure prior to disconnecting outlet line drive air/nitrogen connection is 1/2" FNPT gas outlet connection is 1/4" FNPT for air driven version, gas inlet connection is 1/4" FNPT for air driven version, an air filter is included
- Bore Size - LP Inlet: 0.25 inch
- Bore Size - HP Outlet: 0.25 inch
- Fluid Compatibility: Gas
- Technology Type: Pneumatic
-
Supplier: jbj Techniques Limited
Description: not be exceeded. Filtration of hydraulic media is essential due to the precise tolerances built into each quality unit. » Hydraulic Workholding on Machine Tools » Hydraulic Power Packs » Subsea R.O.V.’s » Press Applications » Pressure Die Casting Machines » Static and Impulse
- Maximum Output Pressure: 4,351.131 to 11,603.016 psi
- Pressure Intensification Factor: 1.5 to 9
- Maximum Inlet Flow: 487.8724878724878 to 792.7927927927926 in³/min
- Maximum Outlet Flow: 42.68884268884268 to 134.16493416493415 in³/min
-
Supplier: jbj Techniques Limited
Description: not be exceeded. Filtration of hydraulic media is essential due to the precise tolerances built into each quality unit. » Hydraulic Workholding on Machine Tools » Hydraulic Power Packs » Subsea R.O.V.’s » Press Applications » Pressure Die Casting Machines » Static and Impulse
- Maximum Output Pressure: 5,801.508 to 10,152.639 psi
- Pressure Intensification Factor: 2 to 7
- Maximum Inlet Flow: 487.8724878724878 to 792.7927927927926 in³/min
- Maximum Outlet Flow: 48.787248787248785 to 134.16493416493415 in³/min
-
Supplier: jbj Techniques Limited
Description: not be exceeded. Filtration of hydraulic media is essential due to the precise tolerances built into each quality unit. » Hydraulic Workholding on Machine Tools » Hydraulic Power Packs » Subsea R.O.V.’s » Press Applications » Pressure Die Casting Machines » Static and Impulse
- Maximum Output Pressure: 4,351.131 to 7,251.885 psi
- Pressure Intensification Factor: 1.5 to 9
- Maximum Inlet Flow: 487.8724878724878 to 792.7927927927926 in³/min
- Maximum Outlet Flow: 42.68884268884268 to 134.16493416493415 in³/min
-
Supplier: SC Hydraulic Engineering Corporation
Description: drive the pump include nitrogen vapor from liquefied gas or natural gas pipeline, thus offering a completely self-contained package independent of external power sources. Hand pump attachment option allows for manual operation when shop air is not available or for precision pressure
- Maximum Discharge Flow: 0.9740249999999999 GPM
- Maximum Discharge Pressure: 2,250 psi
- Discharge Size: 0.25 inch
- Power Source: Air / Pneumatic, Manual
-
Supplier: National Oilwell Varco
Description: are: Portable Well Test Manifolds Underbalanced Drilling Manifolds Mud Standpipe Manifold Cement Manifold Choke & Kill Manifold Mud Gas Separator Control System Local operation panel Remote operation panel Complete packages can also include the following parts: Glycol injection unit “Mud pump
- Application: Hydraulic Fluid, Oil / Fuel, Slurry
- General: Integral Manifold Valves
Find Suppliers by Category Top
Featured Products Top
-
-over-oil intensifier can give you up to 780 psi in a more compact size. It is designed to be used with Branham brakes but also to operate small hydraulic cylinders. Which type and size intensifier is best for your application? Contact us today to learn more about OVLBOOST and our other air-over-oil power boosters. (read more)
Browse Pressure Intensifiers and Boosters Datasheets for Branham, W.C. Inc. -
Air Flow Amplifiers deliver a large airflow for conveying, drying, cooling, or ventilation which is the making for a perfect fume extraction system. These high flow, bladeless blowers have no moving parts so they are inherently safe. They amplify compressed air volumes by 12 – 20 fold in ducted applications. They are especially useful for removing metal chips and scrap, ventilating...
(read more)
Browse Pressure Intensifiers and Boosters Datasheets for Vortec -
W.C. Branham Air/Oil Intensifiers give you the ability to use hydraulic caliper disc brakes without the need of a hydraulic system pressure source by converting typically shop air, 80-100 psi, into hydraulic pressure. The benefit to you is the potential of reducing the need for additional hydraulic caliper disc brakes for your braking application, other components and cost savings.
(read more)
Browse Pressure Intensifiers and Boosters Datasheets for Branham, W.C. Inc. -
Our team here at W.C. Branham is known for our “Solutions in Motion”—and for our products that enable vehicles and industrial equipment to stop quickly, safely, and reliably. So what happens when the vehicle in question is a race car? Here’s how our team joined forces with Team Swinburne to design a better braking solution.
(read more)
Browse Pressure Intensifiers and Boosters Datasheets for Branham, W.C. Inc.