Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: Specialty Seal Group
Description: Ceramic-to-Metal End Seals Give Top Performance in Harsh Industrial Environments Specialty Seal Group (SSG) offers ceramic-to-metal seals a wide range of uses. Single- & Dual-Lead Seals Typical Applications: Industrial Heaters
-
Supplier: Greene, Tweed & Co.
Description: The MSE® seal's superior designed dual-lip body offers improved sealing performance. An unlimited number of custom-engineered MS E configurations are available. Greene, Tweed's MSE seals
- Maximum Operating Pressure: 19000 psi
- Operating Temperature: -65 to 625 F
- Seal Type: Oil / Grease Seal, Hydraulic / Pneumatic Seal
- Shaft O.D. or Seal I.D.: 0.1100 to 60 inch
-
Supplier: Specialty Seal Group
Description: Glass-To-Metal Sealing Meets Challenges of the Most Demanding Applications Single- & Dual-Lead Seals There are two types of glass seals available at Specialty Seal Group: Compression Seals and Matched Seals. In the design of Compression Seals the
-
-
Supplier: Edwards Vacuum
Description: When you buy fittings from Edwards, you can expect the service that only a leading international supplier can offer you. Whether you are an OEM (needing scheduled deliveries of component kits for series production) or a unique system builder, you can rely on your local supplier to meet all your
- Flange and Fitting Seal / System: Other
- ISO Nominal Size: NW 10, NW 16, NW 20, NW 25, NW 32, NW 40, NW 50
- Materials of Construction: Aluminum
- Operating / Bake-out Temperature: 14 to 392 F
-
Supplier: TFC Ltd.
Description: General Information: High Performance Seals for extreme service conditions: TFC’s metal seals are generally used in static applications and are designed to provide high fluid sealing levels under the most extreme working conditions. Our seals are produced from
- Seal Type: O-Ring
-
Supplier: John Crane, Inc.
Description: Available in low- and high-temperature designs, the ECS® is a dry-running seal for emission containment and safety/backup that successfully controls VOC (volatile organic compounds) and VHAP (volatile hazardous air pollutant) emissions. The ECS provides an economical alternative
- Alternate Shaft or Rubbing Speed: Up to 5000 ft/min
- Mechanical Seal Type: Single Mechanical Seal
- Operating Pressure: Up to 450 psi
- Operating Temperature: Up to 800 F
-
Supplier: Ameridrives Couplings
Description: The FAST'S© Coupling was the standard in the metals industry for decades. Ameridrives now offers the labyrinth/metal ring seal option for your coupling needs. This coupling is a part for part "Drop-In" replacement for the FAST'S© coupling. Labyrinth Seal Gear Couplings
-
Supplier: SKF/North America
Description: Whenever a shaft rotates, it needs a bearing arrangement for smooth and effective operation. Wherever there is a bearing, you will always find a seal helping it to reach its maximum service life and reliability. The most common types of seals used in bearing arrangements, are radial
- Maximum Operating Pressure: 7000 psi
- Maximum Operating Speed: 5000 ft/min
- Seal Construction: Metal Cased (Single)
- Seal Type: Single Lip Oil Seal
-
Supplier: John Crane, Inc.
Description: with hard faces for abrasive media; unique design that minimizes the number of O-rings; enlarged seal chamber version available; and self-centering, slide-on-and-tighten cartridge design for fast and easy installation. Applications Process Pumps Other Rotating Equipment
- Alternate Shaft or Rubbing Speed: Up to 4500 ft/min
- Mechanical Seal Type: Single Mechanical Seal
- Operating Pressure: Up to 300 psi
- Operating Temperature: -20 to 400 F
-
Supplier: John Crane, Inc.
Description: The 5600 Series is the first truly universal cartridge seal — and the modular family concept of John Crane's Universal Cartridge will change your approach to sealing. Since the 5600 Series' components are interchangeable, you can apply one seal family throughout your plant. This gives
- Alternate Shaft or Rubbing Speed: Up to 5000 ft/min
- Mechanical Seal Type: Single Mechanical Seal
- Operating Temperature: -20 to 400 F
- Seal Application: Pump
-
Supplier: Edwards Vacuum
Description: When you buy fittings from Edwards, you can expect the service that only a leading international supplier can offer you. Whether you are an OEM (needing scheduled deliveries of component kits for series production) or a unique system builder, you can rely on your local supplier to meet all your
- Flange and Fitting Seal / System: Other
- ISO Nominal Size: NW 10, NW 16, NW 20, NW 25, NW 32, NW 40, NW 50
- Materials of Construction: Steel - Stainless
- Operating / Bake-out Temperature: 14 to 392 F
-
Supplier: Specialty Seal Group
Description: Producing Assemblies for Special Applications Design Besides designing and manufacturing high-volume hermetic seals, we can also produce assemblies for special applications, including: Capacitors Filters Transformers Microwave tubes
-
Supplier: John Crane, Inc.
Description: The Type 2800MB is a state-of-the-art welded metal bellows, gas-lubricated, non-contacting seal for achieving 0.0 fugitive emissions for Maximum Achievable Control Technology compliance in new or existing large bore seal chambers. The seal provides high-reliability
- Mechanical Seal Type: Single Mechanical Seal
- Operating Pressure: Up to 230 psi
- Operating Temperature: -40 to 500 F
- Seal Application: Pump
-
Supplier: JETSEAL, Inc.
Description: . JETSEAL employs a patented Non-Welded Slip Joint for improved sealing. Some metal seals designed with a welded slip joint cover may crack at the weld and increase the leakage rate. JETSEAL’s patented Slip Joint reduces leakage to the smallest effective value at the seal's
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, Oil & Gas, MIL-SPEC, Nuclear, Semiconductor, Specialized
- Material: Nickel / Nickel-Based Alloy, Stainless Steel, Specialized or Other
- Material Features: Heat-Treated, Plated / Coated
- Outside Diameter: 0.9740 to 13.51 inch
-
Supplier: Oneseal
Description: First Generation of Seals The first generation of High Security Seals has been improved over the years and today's top model features engraving of the seal by use of high technology laser. The engraving is protected by an ultra-sound welded plastic cap to protect against
- Application: Cargo / Container, Truck Trailer
- Bar Code Seal: Yes
- Sealing Devices: Metal Strap Seal
-
Supplier: SKF/North America
Description: Whenever a shaft rotates, it needs a bearing arrangement for smooth and effective operation. Wherever there is a bearing, you will always find a seal helping it to reach its maximum service life and reliability. The most common types of seals used in bearing arrangements, are radial
- Axial Cross Section or Thickness: 0.5120 inch
- Housing Bore Diameter or Seal O.D.: 5.75 inch
- Seal Construction: Metal Cased (Single)
- Seal Type: Single Lip Oil Seal
-
Supplier: Hi-Tech Seals, Inc.
Description: Mechanical Seals are meant to replace rope and braided packing. Mechanical Seals are used on rotating shafts (pump, compressors, etc). The product creates a seal when the two flat seal faces are pushed together by axial force from the closing mechanism and by product
- Elastomers: Fluoroelastomer (Viton®, Fluorel®, etc.), Nitrile (Buna-N), Polychloroprene (Neoprene), Other Elastomer
- Face or Primary Ring Materials: Metal: Bronze
- Location on Shaft: Externally Mounted
- Mechanical Seal Type: Single Mechanical Seal
-
Supplier: Technetics Group
Description: ensure world quality precision. FEATURES & BENEFITS Benefits: Machined metal seals are designed to meet applications with high temperatures or cryogenics, high pressures, full vacuum, very corrosive chemicals and penetrating levels of radiation. Offering lower
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, Oil & Gas, Nuclear, Semiconductor
- Cryogenic Application: Yes
- Material Features: Plated / Coated
- Pressure: 100000 psi
-
Description: Metal V-ring seal is based on a metallic "V" substrate, designed to be applied in extreme working conditions. Metal V-Ring seals for internal Pressure or external Pressure are system pressure energized, they require low bolting load and have good spring back. Due to its
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, Oil & Gas, Nuclear
- Cryogenic Application: Yes
- Material: Aluminum, Nickel / Nickel-Based Alloy, Stainless Steel, Steel
- Material Features: Heat-Treated, Plated / Coated
-
Supplier: Technetics Group
Description: The sealing concept of C-FLEX™ metal C-rings is based on the elastic deformation of a metal “C” substrate which, during the compression cycle, gives a contact point on each sealing surface. The substrate characteristics determine the compressive load of the seal. This
- Application / Industry: Aerospace, Piping and Valves, Power Generation, Oil & Gas, Specialized
- Cryogenic Application: Yes
- Material: Specialized or Other
- Material Features: Plated / Coated
-
Description: Sonkit Metal W-Ring (also called E-Ring) Seals are designed to have low load, high spring back performance for high pressure/temperature applications. In service, Metal W-Ring Seals are pressure energized by the system which increases the contact stress and further
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, MIL-SPEC
- Cryogenic Application: Yes
- Material: Nickel / Nickel-Based Alloy
- Material Features: Heat-Treated
-
Description: Sonkit Metal E-Ring (also called W-Ring) Seals are designed to have low load, high spring back performance for high pressure/temperature applications. In service, Metal E-Ring Seals are pressure energized by the system which increases the contact stress and further
- Application / Industry: Aerospace, Power Generation, Specialized
- Cryogenic Application: Yes
- Material: Stainless Steel, Specialized or Other
- Material Features: Heat-Treated, Plated / Coated
-
Supplier: Technetics Group
Description: of the E-FLEX™ metal E-ring can be designed to meet the requirements for each unique application and can be manufactured in a wide range of sizes. FEATURES & BENEFITS Properties: High springback/low load Seal profile and wall thickness designed to
- Application / Industry: Aerospace, Power Generation
- Material: Specialized or Other
- Outside Diameter: 78.74 inch
- Pressure: 1450 psi
-
Supplier: Freudenberg Sealing Technologies
Description: The axial seals of Freudenberg Sealing Technologies are simple sealing elements that are particularly well-suited for use in combination with radial shaft seals, for example, against dirt, dust, grease and spray water. They consist of two components: a coated metal ring and a
- Seal Type: Oil / Grease Seal
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N)
- Sealing Orientation and Direction: Axial Seal
-
Supplier: Temper Corporation
Description: Temper offers a wide range of roll formed single and multi-convolute form spring seals for use at temperatures up to 2000°F. In addition we offer small, precision-machined sealing gaskets of high performance metals such as Inconel® with soft plated gold and silver coatings to assure
- Application / Industry: Oil & Gas, MIL-SPEC, Nuclear
- Seal Type: Spring-Energized, Specialized or Other
- Temperature: 2000 F
-
Supplier: SKF/North America
Description: Whenever a shaft rotates, it needs a bearing arrangement for smooth and effective operation. Wherever there is a bearing, you will always find a seal helping it to reach its maximum service life and reliability. The most common types of seals used in bearing arrangements, are radial
- Axial Cross Section or Thickness: 0.7500 inch
- Housing Bore Diameter or Seal O.D.: 8.75 inch
- Seal Construction: Metal Cased (Single)
- Seal Type: Single Lip Oil Seal
-
Supplier: JETSEAL, Inc.
Description: E-Seals are designed for low to moderate force conditions and high spring back. JETSEAL manufactures two standard types of metal E-Seals, the JE series and JH series. We offer E-Seals capable of sealing both liquids and gases in almost any diameter and in single or
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, Oil & Gas, MIL-SPEC, Nuclear, Semiconductor, Specialized
- Cryogenic Application: Yes
- Material: Nickel / Nickel-Based Alloy, Stainless Steel, Specialized or Other
- Material Features: Heat-Treated, Plated / Coated
-
Description: Metal U-ring seal is based on a metallic "U" substrate, designed to be used for static and low-cycle dynamic shaft seals. By default, Metal U-Ring seals for axial Pressure are system pressure energized, they require low bolting load and have good spring back. Due
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, Oil & Gas, MIL-SPEC, Nuclear, Specialized
- Cryogenic Application: Yes
- Material: Aluminum, Copper, Nickel / Nickel-Based Alloy, Stainless Steel, Steel, Titanium, Specialized or Other
- Material Features: Heat-Treated, Plated / Coated
-
Supplier: Technetics Group
Description: LAMELFLEX®, a unique laminated seal, is designed for critical service applications and dedicated to achieving the highest efficiency for your triple offset butterfly valves by significantly reducing internal leak paths. With state-of-the-art engineering, our LAMELFLEX® seals form a
- Application / Industry: Piping and Valves, Oil & Gas, Nuclear
- Cryogenic Application: Yes
- Material: Stainless Steel, Specialized or Other
- Outside Diameter: 42 inch
-
Supplier: Mega Fortris Americas Inc.
Description: This metal clip seal is manufactured in a way that makes it highly tamper evident. If the seal is opened, it will break, and cannot be re-sealed. The seal is also very useful where several openings next to each other must be sealed. The wire can be cut to
- Application: Drum / Barrel, Utility Meter / Government, Other / Specialized
- Sealing Devices: Metal Strap Seal
-
Supplier: Seal Science, Inc.
Description: Rotary Lip Seals – are designed to be retained in the housings to minimize the possibility of the seal rotating with the shaft. This is accomplished with a press fit metal can, metal retaining ring, or backing plate.
- Operating Temperature: -320 to 550 F
- Seal Type: Oil / Grease Seal, Exclusion Seal
- Sealing Element or Lip Material: Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Sealing Orientation and Direction: External / Piston Seal
-
Supplier: Web Seal Inc.
Description: These solid elastomeric rings are static seals in various cross-section configuations, including: D-Rings Delta rings Diamond-shaped rings H-Rings Heart rings Metal seals Rectangular rings T-section rings Tetraseals Trapezoid rings X or multiple rings
-
Supplier: Senior Aerospace Metal Bellows
Description: Senior Aerospace Metal Bellows designs and manufactures a variety of bellows dynamic seals.These seals are ideal for high temperature applications where elastomeric seals break down. These seals are commonly circular but can also be squares, rectangles, ovals or
- Applications: Aerospace
- Bellows Construction: Welded
- Features: Hermetic Sealing
- Materials: Nickel, Stainless Steel, Titanium
-
Supplier: Greene, Tweed & Co.
Description: Greene, Tweed™s Static Face„¢ Seals are designed to eliminate sealing problems in face-mounted assemblies where large clearances can occur and/or pressures up to 10,000 psi (690 bar) are encountered. Enginee red as a œdrop-in� replacement for O
- Application / Industry: Aerospace
- Outside Diameter: 0.3160 to 4.89 inch
- Pressure: 10000 psi
- Seal Type: O-Ring
-
Supplier: Mega Fortris Americas Inc.
Description: The metal strap can still move slightly when the Domino is sealed, enabling inspectors to detect gluing easily. The Inspection Window is an optional feature, which enables quick and easy visual inspection of the locking mechanism - a unique feature developed by MegaFortris. Typical
- Application: Airplane, Cargo / Container, Rail Car, Truck Trailer, Other / Specialized
- Bar Code Seal: Yes
- Sealing Devices: Metal Strap Seal
-
Supplier: Mega Fortris Americas Inc.
Description: The orbit seal is a highly secure strap seal due to its all metal locking mechanism. A female lock is housed in the locking chamber at one end of the strip while a male lock is located on the other end of the strip, inter-mitted with the locking mechanism. Typical applications
- Application: Airplane, Cargo / Container, Truck Trailer, Utility Meter / Government, Other / Specialized
- Sealing Devices: Metal Strap Seal
-
Supplier: Greene, Tweed & Co.
Description: Generally used as a primary rod seal in dynamic tandem systems, Greene, Tweed’s new ESE design is available for use in either one or two back-up gland widths. The ESE provides superior performance in tandem seal applications. Its unidirectional, “self-venting” design is
- Operating Temperature: 65 to 450 F
- Seal Type: Hydraulic / Pneumatic Seal
- Sealing Element or Lip Material: EPDM, Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Flourosilicone (FVMQ, FMQ, FPM, FSI), Nitrile (NBR - Buna-N)
- Sealing Orientation and Direction: Internal / Rod Seal
-
Supplier: Fluorocarbon Limited
Description: effective solutions to your needs. METAL SEALING RINGS Metal O and C rings are used as a deformable seal in a static sealing situation. The ring is located between two flanges or similar and undergoes a controlled compression. They are defined by their free height which is the
- Cryogenic Application: Yes
- Outside Diameter: 90 inch
- Pressure: 145037 psi
- Seal Type: O-Ring, C-Ring
-
Supplier: Parker Hannifin / Seal Group
Description: Complete/integrated pistons combine a metal or plastic core, bearing and seals into a single unit. Both bonded and pre-assembled versions are available. The one-piece construction reduces assembly time and part number inventory. They perform two functions: sealing and guiding. Single
- Operating Temperature: -22 to 250 F
- Seal Type: Hydraulic / Pneumatic Seal, Piston Ring
- Sealing Element or Lip Material: Ethylene Acrylic (AEM - Vamac®, etc.), EPDM, Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Flourosilicone (FVMQ, FMQ, FPM, FSI), Nitrile (NBR - Buna-N), Nitrile - Highly Saturated (HNBR), Polychloroprene (CR - Neoprene)
- Sealing Orientation and Direction: External / Piston Seal
-
Supplier: JETSEAL, Inc.
Description: JETSEAL manufactures a superior quality, cost-effective solution that is available in various cross-sections and virtually any diameter and material. We offer C-Seal configurations in the circular ring and rectangular forms, both customizable to your specifications. C-Seals are
- Application / Industry: Aerospace, Chemical & Processing, Piping and Valves, Power Generation, Oil & Gas, MIL-SPEC, Nuclear, Semiconductor, Specialized
- Cryogenic Application: Yes
- Material: Nickel / Nickel-Based Alloy, Stainless Steel, Specialized or Other
- Material Features: Heat-Treated, Plated / Coated
-
Supplier: Parker Hannifin / Seal Group
Description: Complete/integrated pistons combine a metal or plastic core, bearing and seals into a single unit. Both bonded and pre-assembled versions are available. The one-piece construction reduces assembly time and part number inventory. They perform two functions: sealing and guiding. Double
- Maximum Operating Pressure: 49313 psi
- Operating Temperature: -22 to 250 F
- Seal Type: Hydraulic / Pneumatic Seal, Piston Ring
- Sealing Element or Lip Material: Ethylene Acrylic (AEM - Vamac®, etc.), Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Nitrile - Highly Saturated (HNBR)
-
Supplier: Berliss
Description: Single seal, unbalanced, single spring, bi-directional, elastomer bellows
- Alternate Shaft or Rubbing Speed: 3000 ft/min
- Direction of Shaft Rotation: Clockwise (Right-hand), Counter-clockwise (Left-hand)
- Elastomers: Ethylene Propylene (EPDM), Fluoroelastomer (Viton®, Fluorel®, etc.), Nitrile (Buna-N)
- Face or Primary Ring Materials: Metal: Other Metal
-
Description: Aluminum seals locate on the centering ring groove (inner centering) or outside edge of the flange (outer centering) depending on the size. (Inner and outer centering versions are available for all NW flange sizes.) Aluminum knife-edges are compressed by the sealing surfaces of the mating
- Fitting Connection / Port Type(s): Flange
- Flange and Fitting Seal / System: ISO-KF / ISO-QF (Small Clamped, <2")
- ISO Nominal Size: NW 16, NW 25, NW 40, NW 50, NW 63, NW 80, NW 100
- Operating / Bake-out Temperature: -454 to 302 F
-
Supplier: American Casting & Manufacturing Corp.
Description: Model WP101 is an all metal padlock seal suited for long term exposure to sunlight and the elements. Available with galvanized or stainless steel hasps. Seals purchased online are printed SEALED and numbered. DESCRIPTION Model WP101 is an all metal padlock
- Application: Airplane, Bags, Cargo / Container, Drum / Barrel, Luggage, Truck Trailer, Utility Meter / Government
- Disposable: Yes
- Markable: Yes
- Sealing Devices: Padlock Seal
-
Supplier: VanSeal
Description: Intermediate pressure lip seal with excluder and rubber O.D.
- Axial Cross Section or Thickness: 0.3130 inch
- Housing Bore Diameter or Seal O.D.: 1.38 inch
- Integral Wiper or Scraper Element: Yes
- Maximum Operating Pressure: 100 psi
-
Supplier: SAE International
Description: Groove designs presented herein are applicable for use with metal ring seals conforming to MS9142, MS9202, MS9203, MS9204, and MS9205, or modifications thereto as specified herein.
-
Supplier: SAE International
Description: Groove designs presented herein are applicable for use with machined or formed metal seals which are similar in configuration to those shown in figure 3 , which operate under internal pressure or in vacuum service and which have been specifically qualified or recommended by the
-
Supplier: Conax Technologies
Description: Conax Technologies Model MK Midlock Glands seal a single tube or probe. Featuring a metal-to-metal seal rather than our standard soft sealant technology, MK glands are used where a joint must be opened and resealed in the same setting. Their unique design forms the seal
- Application: Pipe / Tube, Probes
- Material: Stainless Steel
- Mounting Size: 0.1250 to 0.5000 inch
- Number of Elements: 1 #
-
Supplier: BellowsTech, an MW Industries company
Description: temperatures. Bellows mechanical seals can eliminate O-rings to increase compatibility and reduce potential leak paths. The metal bellows design allows for higher flow rates and less clogging than traditional spring seals. Bellows technology creates a uniform outside wall for
- Features: Handles Slurry
- Mechanical Seal Type: Single Mechanical Seal
- Seal Application: Pump, Gas Seal (Spiral Groove Seal)
- Seal Design: Metal Bellows
-
Supplier: CinchSeal
Description: assembly and stop leaks as well. The design currently covers Dodge and Falk. The metal seals are air-purged by drilling and tapping the CEMA adapter housing for standard pipe thread. As top mechanical cartridge seal manufacturers, CinchSeal has the experience and
- Seal Type: Oil / Grease Seal, Exclusion Seal, Other
-
Supplier: FTL Technology
Description: industry. Wiper Seals Wipers, or scrapers, are used to scrape dirt, foreign particles and moisture from shafts as they retract into the system, preventing damage to internal components. FTL Technology can supply wiper seals in metal, PUR, NBR, FKM and filled PTFE materials to
- Maximum Operating Pressure: 145 psi
- Seal Type: Oil / Grease Seal, Hydraulic / Pneumatic Seal, Exclusion Seal, Piston Ring
- Sealing Orientation and Direction: Internal / Rod Seal, External / Piston Seal
-
Supplier: Flex-A-Seal, Inc.
Description: Fully Split Cartridge Seal (PATENT No. 5662340) Fully split cartridge seal, no pump disassembly, simply attach two halves over the shaft and mount like any other cartridge seal. The only split seal that can be fully pressure tested at the factory before shipping
- Elastomers: Fluoroelastomer (Viton®, Fluorel®, etc.)
- Face or Primary Ring Materials: Metal: Other Metal
- Location on Shaft: Externally Mounted
- Mechanical Seal Type: Single Mechanical Seal
-
Supplier: SKF/North America
Description: For added protection in extremely contaminated applications, in addition to our standard V-ring; SKF also offers the type MVR. The MVR seal also seals axially and functions by combining positive lip contact with centrifugal slinging action. However, the MVR seal is different in
- Axial Cross Section or Thickness: 2.56 inch
- Housing Bore Diameter or Seal O.D.: 82.44 inch
- Operating Temperature: -40 to 392 F
- Radial Cross Section: 1.18 inch
-
Supplier: American Casting & Manufacturing Corp.
Description: Model FC-1 XW metal truck and cargo seals are 3/8" X 8 1/2". Seals purchased online are printed "SEALED" and consecutively numbered. MODEL FC1 – XW CAR SEAL AC&M Flat Metal Car Seals are an industry standard for trucks and cargo containers. These all
- Application: Airplane, Cargo / Container, Rail Car, Truck Trailer, Utility Meter / Government
- Disposable: Yes
- Markable: Yes
- Sealing Devices: Metal Strap Seal
-
Supplier: American Casting & Manufacturing Corp.
Description: Model FC-4 Heavy Gauge metal truck and cargo seals are 3/8" X 8 1/2". Seals purchased online are printed "SEALED" and consecutively numbered. MODEL FC4 HEAVY GAUGE AC&M Flat Metal Car Seals are an industry standard for trucks and cargo containers. These all
- Application: Airplane, Cargo / Container, Rail Car, Truck Trailer, Utility Meter / Government
- Disposable: Yes
- Markable: Yes
- Sealing Devices: Metal Strap Seal
-
Supplier: American Casting & Manufacturing Corp.
Description: Model FC-2 Economy metal truck and cargo seals are 5/16" X 8 1/2". Seals purchased online are printed "SEALED" and consecutively numbered. MODEL FC2 ECONOMY AC&M Flat Metal Car Seals are an industry standard for trucks and cargo containers. These all steel
- Application: Airplane, Cargo / Container, Rail Car, Truck Trailer, Utility Meter / Government
- Disposable: Yes
- Markable: Yes
- Sealing Devices: Metal Strap Seal
Find Suppliers by Category Top
Featured Products Top
-
Non-circular shapes that meet unique applications
(read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
JETSEAL is on the cutting edge of sealing technology with the uniquely designed and patented Lever Seal. The Lever Seal (read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
E-Seals are designed for low to moderate force conditions and high spring back. JETSEAL manufactures two standard types of metal E-Seals, the JE series and (read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
Non-Circular seals also called shaped seals can be manufactured in O Ring, C Ring and spring energized C Ring. The cross-section can be produced from 0.89 to 12.7 mm. The minimum radius for each of the metal Ring types is given in the table below. Unlike other circular metal seals, Sonkit asks to provide an application datasheet and to provide a sketch or drawing. (read more)
Browse Metal Ring Seals Datasheets for Sonkit (Shanghai) Industry Technology Co., Ltd. -
Specializing in Metal Ring Seals, Sonkit presents high quality, cost-effective metal seals. Metal V-ring is based on a metallic "V" substrate, designed to be applied in extreme working conditions. Metal V-Rings for internal Pressure (read more)
Browse Metal Ring Seals Datasheets for Sonkit (Shanghai) Industry Technology Co., Ltd. -
Space, the final frontier, the great expanse and also the most unforgiving of all sealing environments. JETSEAL is known for producing highly engineered metal seals with the (read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
Sonkit develops and manufactures all kinds of high-performance metal seals, which work in extreme conditions, like high temperatures, high pressures, corrosion medium, or combinations. Sonkit strictly implements the ISO9001-2015 quality management system. Our products (read more)
Browse Metal Ring Seals Datasheets for Sonkit (Shanghai) Industry Technology Co., Ltd. -
Space, the final frontier, the great expanse and also the most unforgiving of all sealing environments. JETSEAL is known for producing highly engineered metal seals with the highest quality in the market for use in the most demanding applications. JETSEAL’s engineered metal seals can (read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
Much like a commercial airliner’s transatlantic journey, where trust and precision are paramount due to the absence of runways and zero margin for error, nuclear fusion secures its success through the critical role of resilient metal seals. Small nuclear reactors (SMRs) and micro (read more)
Browse Metal Ring Seals Datasheets for JETSEAL, Inc. -
Sonkit (Shanghai) Industry Technology Co., Ltd.
How to Choose Metal Seal Ring and the Characteristics of The Metal Seal Ring
Metal Seal Ring is the link device in the industrial pipeline, it has good high temperature resistance and corrosion resistance. When choosing a metal seal ring, measure the size of the pipe first to ensure that it can be installed accurately without gaps. How to choose metal seal (read more)
Browse Metal Ring Seals Datasheets for Sonkit (Shanghai) Industry Technology Co., Ltd.
Conduct Research Top
-
How a Metal Seal Works
How does a metal seal work?
-
The Sealing Performance of Metal Seals
The sealing performance of Metal Seals is based on a the relative high specific contact load at the sealing line and a certain resiliency or spring back of the elastic metal seal.
-
Metal Seal Best Practice
Nowadays, More and more industry applications are involved with high temperature, high pressure, or vacuum. Customers who is new to metal seal always have a concern if metal seals can really achieve the targeting sealing effect in the corresponding working conditions. Without doubt, in the extreme
-
Advantages of Metal Seal Rings
The most extreme environments demand metal seal sealing solutions. Resilient metal seals meet the challenges of high temperatures or cryogenics, high pressures or high vacuum, corrosive chemicals and even intense levels of radiation performing dependably for many years.
-
How to Choose Metal Seal Ring and the Features of the Metal Seal Ring
Metal Seal Rings are used as a connection device in industrial pipelines because of their excellent temperature and corrosion resistance. Measure the size of the pipe first when selecting a metal seal ring to guarantee that it can be placed correctly and without gaps.
-
Groove Finish Recommendation for Metal Seal
Groove finish is a critical factor for metal seal. Depend on different types of medium, Sonkit recommends the following groove surface roughnesses.
-
Problems with the Glass to Metal Seal in Electronics
The glass to metal seal is a truly essential phenomenon in electronics, used in the manufacture of a wide range of products. From the "old-fashioned" (but still ubiquitous) incandescent light bulb to vacuum tubes, electric discharge tubes, and semiconductor diodes, to the reed switches in laptops
-
Simplify Your Metal Seal Selection and Groove Design
Sonkit latest metal seal design guide, To help you simplify your metal seal selection and groove design
-
What is the Difference Between a Metal Seal and a Rubber Seal?
With ever more stringent pollution and leakage legislation, plus the demand for greater efficiency and lifetime reliability, metal seals provide the highest reliability sealing solutions for today's world and tomorrow's.
-
8 Questions for Selecting a Best-fit Metal Seal
Metal Seal is a special seal for extreme working conditions, which can be applied in high temperature, high pressure, special medium, or combinations. Different applications need different types of Metal Seals to achieve required sealing effect. This manual is for customers to select Metal Seal
More Information Top
-
Brazing
Glass-to- metal seals have been made for many years in the vacuum-tube industry, and the experience thus obtained gives a general insight into the problem of fabricating ceramic-to-metal joints (Ref 98).
-
Sealing Tubular Connections
As an example, both conditions are found in 8-Round threads, where the root/crest clearances are manufactured leak passages and the flanks are intimately fitted metal seals .
-
Modern Construction Envelopes
Sheet metal seal I6.
-
Engineering Development of Ceramic Membrane Reactor System for Converting Natural Gas to Hydrogen and Synthesis Gas for Liquid Transportation Fuels
Cross Section of a U-ring Compression Seal Mating a Ceramic Tube (35) with a Metal Seal Block (33)........................
-
Process Plant Equipment: Operation Control and Reliability Complete Document
7.1.4 Gasket and Metal Seal Applications, 120 7.1.5 .
-
Proceedings of ISES World Congress 2007 (Vol. I – Vol. V)
Dominik Bestenlehner, Harald Drück, Stephan Fischer, Hans-Müller Steinhagen(735) The glass-to- metal sealing process in parabolic trough solar receivers .............