-
Supplier: ROHM Semiconductor GmbH
Description: BSS138BKAHZG is Single Nch 60V 400mA MOSFET and ESD protection diode are included in the SST3 package. This product is ideal for switching circuit and high-side load switch, relay driver applications. This is a high-reliability product of automotive grade qualified to
- Transistor Grade / Operating Range: Commercial
- Polarity: N-Channel
- Features: Other
- Package Type: SOT23
-
Supplier: ROHM Semiconductor GmbH
Description: BSS84WAHZG is Single Pch -60V -0.21A MOSFET and ESD protection diode are included in the industry’s favorite SOT-323 package. Ideal for switching circuit and high-side load switch, relay driver applications. This is a high-reliability product of automotive grade qualified
- Transistor Grade / Operating Range: Commercial
- Features: Other
- Polarity: P-Channel
-
Supplier: ROHM Semiconductor GmbH
Description: BSS138BWAHZG is Single Nch 60V 380mA MOSFET and ESD protection diode are included in the UMT3 package. This product is ideal for switching circuit and high-side load switch, relay driver applications. This is a high-reliability product of automotive grade qualified to
- Transistor Grade / Operating Range: Commercial
- Polarity: N-Channel
- Features: Other
-
-
Supplier: ROHM Semiconductor GmbH
Description: BSS84AHZG is Single Pch -60V -0.23A MOSFET and ESD protection diode are included in the industry’s favorite SOT-23 package. Ideal for switching circuit and high-side load switch, relay driver applications. This is a high-reliability product of automotive grade qualified
- Transistor Grade / Operating Range: Commercial
- Features: Other
- Polarity: P-Channel
- Package Type: SOT23
-
Supplier: Infineon Technologies AG
Description: functional safety. The device is optimized for low-frequency and high-current switching applications. It is an ideal fit for solid-state relay, battery disconnect, and eFuses. The temperature sensor enhances CoolMOS™ S7A features, allowing the best possible utilization of the
- VGS(off): 3.5 to 4.5 volts
- rDS(on): 0.01 ohms
- TJ: -55 to 150 C
- Features: Automotive, MOSFET, Other
-
Supplier: Infineon Technologies AG
Description: functional safety. The device is optimized for low-frequency and high-current switching applications. It is an ideal fit for solid-state relay, Battery Disconnect, and eFuses. The temperature sensor enhances CoolMOS™ S7A features, allowing the best possible utilization of the
- VGS(off): 3.5 to 4.5 volts
- rDS(on): 0.022 ohms
- Features: Automotive, MOSFET, Other
- Polarity: N-Channel
-
Supplier: Infineon Technologies AG
Description: functional safety. The device is optimized for low-frequency and high-current switching applications. It is an ideal fit for solid-state relay, Battery Disconnect, and eFuses. The temperature sensor enhances CoolMOS™ S7A features, allowing the best possible utilization of the
- VGS(off): 3.5 to 4.5 volts
- rDS(on): 0.04 ohms
- Features: Automotive, MOSFET, Other
- Polarity: N-Channel
-
Supplier: Infineon Technologies AG
Description: functional safety. The device is optimized for low-frequency and high-current switching applications. It is an ideal fit for solid-state relay, Battery Disconnect, and eFuses. The temperature sensor enhances CoolMOS™ S7A features, allowing the best possible utilization of the
- VGS(off): 3.5 to 4.5 volts
- rDS(on): 0.022 ohms
- Features: Automotive, MOSFET, Other
- Polarity: N-Channel
-
Supplier: ROHM Semiconductor USA, LLC
Description: RK7002BMHZGis the high reliability Automotive MOSFET, suitable for switching and low-side load switch, relay driver.
- V(BR)DSS: 60 volts
- IDSS: 250 milliamps
- PD: 200 milliwatts
- TJ: -55 to 150 C
-
Supplier: Perfect Switch, LLC
Description: Specifically designed for automotive, military, marine, aerospace, industrial, test fixtures, and various 12 and 24 volt OEM applications, POWER-GATE devices are engineered to handle shock and high-vibration environments . Our MOSFET-based relays are well suited
- Input (Pick-up) Voltage Range: 12 to 24 volts
- Input Current Range: 25 to 300 amps
- Maximum Current: 300 amps
- Load Voltage: 12 to 24 volts
-
Supplier: Perfect Switch, LLC
Description: Specifically designed for automotive, military, marine, aerospace, industrial, test fixtures, and various 12 and 24 volt OEM applications, POWER-GATE devices are engineered to handle shock and high-vibration environments . Our MOSFET-based relays are well suited
- Input (Pick-up) Voltage Range: 12 to 24 volts
- Input Current Range: 25 to 150 amps
- Maximum Current: 150 amps
- Load Voltage: 12 to 24 volts
-
Supplier: ROHM Semiconductor USA, LLC
Description: RUC002N05HZGis the high reliability Automotive MOSFET, suitable for switching and low-side load switch, relay driver.
- V(BR)DSS: 50 volts
- IDSS: 200 milliamps
- PD: 200 milliwatts
- TJ: -55 to 150 C
-
Supplier: Perfect Switch, LLC
Description: Relay can be programmed to sense system battery voltage, and protect the system from accidental battery discharge. Autonomous relays span the entire POWER-GATE voltage and current spectrum. Contact us and let our talented applications engineers help determine what configuration is best
- Input (Pick-up) Voltage Range: 12 to 24 volts
- Input Current Range: 25 to 300 amps
- Maximum Current: 300 amps
- Load Voltage: 12 to 24 volts
-
Supplier: Nexperia B.V.
Description: N-channel enhancement mode Field-Effect Transistor (FET) in a leadless medium power DFN2020MD-6 (SOT1220) Surface-Mounted Device (SMD) plastic package using Trench MOSFET technology. Features and benefits Low threshold voltage Trench MOSFET technology Side wettable flanks for
- V(BR)DSS: 30 volts
- IDSS: 8,000 milliamps
- VGS(off): 0.65 volts
- rDS(on): 0.02 ohms
-
Supplier: Perfect Switch, LLC
Description: without. If only there was a device that served as a low voltage disconnect, but could also handle ALL the accessory loads thus eliminating the need for external contactors. POWER-GATE Voltage Sensitive Relays are your solution. POWER-GATE Voltage Sensitive Relays provide a
- Input (Pick-up) Voltage Range: 12 to 24 volts
- Input Current Range: 25 to 300 amps
- Maximum Current: 300 amps
- Load Voltage: 12 to 24 volts
-
Supplier: Nexperia B.V.
Description: P-channel enhancement mode Field-Effect Transistor (FET) in a leadless medium power DFN2020MD-6 (SOT1220) Surface-Mounted Device (SMD) plastic package using Trench MOSFET technology. Features and benefits Low threshold voltage Trench MOSFET technology Side wettable flanks for
- V(BR)DSS: -20 volts
- IDSS: -7,200 milliamps
- VGS(off): 0.7 volts
- rDS(on): 0.029 ohms
-
Supplier: Nexperia B.V.
Description: N-channel enhancement mode Field-Effect Transistor (FET) in a leadless medium power DFN2020MD-6 (SOT1220) Surface-Mounted Device (SMD) plastic package using Trench MOSFET technology. Features and benefits Low threshold voltage Trench MOSFET technology Side wettable flanks for
- V(BR)DSS: 20 volts
- IDSS: 9,000 milliamps
- VGS(off): 0.65 volts
- rDS(on): 0.018 ohms
-
Supplier: Nexperia B.V.
Description: P-channel enhancement mode Field-Effect Transistor (FET) in a leadless medium power DFN2020MD-6 (SOT1220) Surface-Mounted Device (SMD) plastic package using Trench MOSFET technology. Features and benefits Trench MOSFET technology Side wettable flanks for optical solder
- V(BR)DSS: -30 volts
- IDSS: -6,099.999999999999 milliamps
- VGS(off): -1.5 volts
- rDS(on): 0.029 ohms
-
Supplier: CARLO GAVAZZI Automation Components
Description: CARLO GAVAZZI has launched the RM1D Series, a comprehensive family of DC switching solid state relays. The RM1D Series is designed for applications that demand critical response times, rapid cycling, and high reliability. They are ideal for use in transportation, off-grid and
- Operating Temperature: -4 to 176 F
- Application Type: Automotive Relay
- Output Voltage Type: DC
- Mounting: Panel
-
Supplier: Littelfuse, Inc.
Description: pricing. Applications include push-pull amplifiers, buck converters, DC choppers, power solid state relays, CMOS high power amplifiers, high current regulators, and high side switching in automotive and test equipment. The superior ruggedness of the Polar P-Channel Power MOSFETs
- Features: Other
- Polarity: P-Channel
- Package Type: TO-247
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: N CHANNEL MOS TYPE (HIGH SPEED, DC-DC CONVERTER, RELAY DRIVE AND MOTOR DRIVE APPLICATIONS) Product overview: 2SK2963 from Toshiba Electronic Devices and Storage Corporation is a DC-DC Converter IC for stable power rails, DC-DC conversion, battery-powered electronics, automotive
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: Silicon N Channel MOS Type DC-DC Converter, Relay Drive and Motor Drive Applications / Trans MOSFET N-CH Si 600V 10A 4-Pin(2+2Tab) TFP Product overview: 2SK3438 from Toshiba Electronic Devices and Storage Corporation is a DC-DC Converter IC for stable power rails, DC-DC
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: Silicon N Channel MOS Type Relay Drive, DC-DC Converter and Motor Drive Applications / Trans MOSFET N-CH Si 30V 5A 3-Pin(3+Tab) TO-220NIS Product overview: 2SK3754 from Toshiba Electronic Devices and Storage Corporation is a DC-DC Converter IC for stable power rails, DC-DC
-
Supplier: ERSAELECTRONICS PTE. LTD.
Description: N CHANNEL MOS TYPE (HIGH CURRENT SWITCHING, DC-DC CONVERTER, RELAY DRIVE AND MOTOR DRIVE APPLICATIONS) / Trans MOSFET N-CH Si 60V 70A 3-Pin(3+Tab) TO-3PN Product overview: 2SK2987 from Toshiba Electronic Devices and Storage Corporation is a DC-DC Converter IC for stable power
Find Suppliers by Category Top
Featured Products Top
-
operating contact terminals, a relay may be used for the management of a single control signal or multiple. With their control of signals and their operational characteristics, relays also may convert smaller electrical inputs into larger outputs, increasing their uses and abilities. Capable of being (read more)
Browse Electromechanical Relays Datasheets for ASAP Semiconductor LLC -
manufacture of dozens of types of electromechanical relays. With products for industries including white goods, industrial, lighting, alternative energy, and automotive, Churod has achieved a driving position in the market due to foundational values of engineering excellence and customer service. Substantial annual investment in R&D and automation ensure Churod will remain on the forefront of technology and manufacturing for years to come. (read more)
Browse Electromechanical Relays Datasheets for Churod Americas, Inc. -
FCL Components FTR-B3/FTR-B4/FTR-C1 signal relays are specialized for highly reliable automotive signal switching. They can operate at 1mA 400VDC and offer a guarantee of 1mA 500VDC switching (maximum switching power 0.4W). The lineup includes the small, low profile FTR-B3; the small, slim FTR (read more)
Browse Electromechanical Relays Datasheets for FCL Components America -
Cost-efficient micro-lead portfolio combines safety with enhanced design flexibility using standard footprint package solutions. Nexperia today introduced its first portfolio of 40-100 V automotive MOSFETs in industry standard micro-lead packages designed for use in (read more)
Browse Metal-Oxide Semiconductor FET (MOSFET) Datasheets for Nexperia B.V. -
Meet the market’s smallest, low power 40A, automotive grade, PCB-mounted relay, the FBR53-LE. Because this relay is more than 2 mm lower in height than others in its class, it helps enable more compact designs. The FBR53-LE is a 1 Form U (Form A with twin contacts) relay that (read more)
Browse Electromechanical Relays Datasheets for FCL Components America -
relays since 1974. These high-quality, affordable relays are perfect for automotive electrical systems. Song Chuan mini automotive and micro relays are designed to endure extreme temperatures and come in a variety of contact current ratings and contact forms. (read more)
Browse Electromechanical Relays Datasheets for Waytek, Inc. -
, Inc. Founded in 2006 by a group of industry experts, Churod Electronics has become a leader in the design and manufacture of dozens of types of electromechanical relays. With products for industries including white goods, industrial, lighting, alternative energy, and (read more)
Browse Safety Relays Datasheets for Churod Americas, Inc. -
TE offers a diverse portfolio and one of the broadest ranges of of relay types, including automotive high-voltage relays, automotive high-current relays, latching (bi-stable) relays and non-latching (monostable) relays, plug-in relays, high-frequency relays, reed relays, and solid state relays (read more)
Browse Electromechanical Relays Datasheets for Heilind Electronics, Inc. -
FTR-E1/E1HC Automotive Relays Reach 1000VDC Without Hydrogen Gas Injection Small, bi-directional, low-power coil consumption FTR-E1/FTR-E1-HC single-pole relays can reach 1000VDC without hermetic sealing. Great for pre-charge and rapid shutdown (read more)
Browse Electromechanical Relays Datasheets for FCL Components America -
provides high current conduction, reduced parasitic inductance, and excellent thermal performance. These features make the devices ideal for motor control, power supplies, renewable energy systems, and other power-hungry applications. The range also includes application-specific MOSFETs (ASFETs) designed (read more)
Browse Metal-Oxide Semiconductor FET (MOSFET) Datasheets for Nexperia B.V.
More Information Top
-
Omron Solid State Relays - PCB Mount | Mouser
Omron Electronics G3VM Series MOSFET Relays feature performance, size, and characteristics that are perfectly suited for a variety of industries, including automated test equipment, medical equipment, instrumentation, security equipment, automated meter reading, automotive diagnostic equipment, and communications.
-
Omron G3VM Series MOSFET Relays | Mouser
Omron Electronics G3VM Series MOSFET Relays feature performance, size, and characteristics that are perfectly suited for a variety of industries, including automated test equipment, medical equipment, instrumentation, security equipment, automated meter reading, automotive diagnostic equipment, and communications.
-
Mouser Electronics, Inc.
Omron Electronics G3VM Series MOSFET Relays feature performance, size, and characteristics that are perfectly suited for a variety of industries, including automated test equipment, medical equipment, instrumentation, security equipment, automated meter reading, automotive diagnostic equipment, and communications.
-
Arduino Robotics
The power relay from Radio Shack that I use is intended for automotive use and rated for 14vdc and 60amps; although I used it to switch 24vdc and approximately 30 to 50amps for more than a year without problems (see Figure 10 … … 12v and can be turned on using a single logic-level N-channel mosfet interfaced with the …
-
Relays Report - World - 2013
Higher growth is expected of Reed and MOSFET products, but due to the relative size of the signal/power relay market, these latter products are expected to account for around 43% ($25 million) of PCB relay revenues growth through to 2017. Automotive Relays .
-
Relays Report - EMEA - 2013
Higher growth of Reed and MOSFET products is expected, however the relative size of the signal/power relay market is such that it is expected to account for over 63% of PCB relay revenues growth through to 2017. Automotive Relays .
-
Relays Report - Americas - 2013
Higher growth is expected of Reed and MOSFET products, but due to the relative size of the signal/power relay market, these latter products are expected to account for around 43% ($25 million) of PCB relay revenues growth through to 2017. Automotive Relays .
-
http://www.nxp.com/documents/application_note/APPCHP5.pdf
All solid-state switches have significant advantages over relays but there are different types of solid-state … There are two major types of solid-state switches which are suitable for use in automotive applications - power MOSFETs and bipolar transistors - and several factors need to be considered if the optimum choice is to be made.
-
MOSFET Electronic Circuits or Electronic Schematics - Page 1
Amplify & Shift EPAD MOSFET Output with an Operational Amplifier - Circuit Ideas for Designers Application Notes Advanced Linear Devices, Inc....[App Note] AN10 Automotive Relay Drivers using the Zvn4206av: Protection Free Interfacing with Avalanche Rated MOSFETs - Zetec Semiconductors Applications Notes An alternative solution is provided to usual large package Darlington effected relay driver.
-
Automotive electrical systems-the power electronics market of the future
Reducing these costs is a major challenge for the power electronics industry, and whether the industry meets this challenge or not will determine its future in the automo- tive environment. Already power MOSFETs are replacing relays to control some functions in the car, and high intensity discharge (HID) lamps, requiring power electronic ballasts, are replacing in- candescent headlamps in high-end vehicles.
Indicates content that may require registration and/or purchase.