Products & Services
See also: Categories | Featured Products | Technical Articles | More Information-
Supplier: VanSeal
Description: Rod wiper, additional material may be available, pressures to 2500 psi
- Construction: All Rubber or Polymer
- Maximum Operating Pressure: 2500 psi
- Shaft O.D. or Seal I.D.: 0.6750 inch
- Wiper or Scraper: Wiper
-
Supplier: Hi-Tech Seals, Inc.
Description: Wipers are primarily designed to stop contaminants from entering a cylinder on the rod; however, they can also act as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/or the damage of other sealing
- Operating Temperature: -65.2 to 221 F
- Sealing Element or Lip Material: Polyurethane / Urethane
- Shaft O.D. or Seal I.D.: 0.3937 to 12.99 inch
- Wiper or Scraper: Wiper
-
Supplier: Hi-Tech Seals, Inc.
Description: Wipers are primarily designed to stop contaminants from entering a cylinder on the rod; however, they can also act as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/or the damage of other sealing
- Operating Temperature: -65.2 to 221 F
- Sealing Element or Lip Material: Polyurethane / Urethane
- Shaft O.D. or Seal I.D.: 0.3150 to 7.87 inch
- Wiper or Scraper: Wiper
-
-
Supplier: Hi-Tech Seals, Inc.
Description: Wipers are primarily designed to stop contaminants from entering a cylinder on the rod; however, they can also act as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/or the damage of other sealing
- Operating Temperature: -40 to 248 F
- Sealing Element or Lip Material: Nitrile - Highly Saturated (HNBR)
- Shaft O.D. or Seal I.D.: 0.3937 to 15.75 inch
- Wiper or Scraper: Wiper
-
Supplier: Hi-Tech Seals, Inc.
Description: Wipers are primarily designed to stop contaminants from entering a cylinder on the rod; however, they can also act as a secondary rod seal. If contaminants were allowed to enter the cylinder it could lead to damage of your rod and/or the damage of other sealing
- Operating Temperature: -65.2 to 221 F
- Sealing Element or Lip Material: Polyurethane / Urethane
- Shaft O.D. or Seal I.D.: 0.3937 to 12.99 inch
- Wiper or Scraper: Wiper
-
Supplier: FTL Technology
Description: Wiper seals or scrapers are axial seals which maintain sealing contact with the piston rod, while allowing the reciprocating motion of the rod to pass through the inner bore of the seal. Installed in the sealing configurations of pneumatic cylinders to
- Maximum Operating Pressure: 14.5 psi
- Maximum Operating Speed: 197 ft/min
- Operating Temperature: -40 to 230 F
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Polytetrafluoroethylene (PTFE- Teflon®, etc.), Polyurethane / Urethane
-
Supplier: Daemar Inc.
Description: The main function of the Rod Wiper is to keep the rod and cylinder clean and free from foreign matter; thus preventing premature failure. The Rod Wiper is not a pressure sealing element, yet it prevents possible abrasive effects which may result if contaminants
- Seal Type: Hydraulic / Pneumatic Seal
-
Supplier: Freudenberg Sealing Technologies
Description: In pneumatic and hydraulic cylinders, wipers protect the inside of the cylinder against the penetration of dirt during the retraction of the rod. For every type of cylinder and application, Freudenberg Sealing Technologies offers the right wiper with maximum reliability and
- Seal Type: Oil / Grease Seal, Hydraulic / Pneumatic Seal
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N)
-
Supplier: Precision Associates Incorporated
Description: Precision Associates H-Wipers combine a wiper with a U-Cup seal.
- Construction: All Rubber or Polymer
- Housing Bore Diameter or Seal O.D.: 0.5625 to 9.25 inch
- Shaft O.D. or Seal I.D.: 0.2500 to 8.75 inch
- Wiper or Scraper: Wiper
-
Supplier: Hallite Seals International Ltd.
Description: The Hallite 839 wiper is precision moulded in Hallite's high performance polyurethane - Hythane 181 for maximum wear resistance, and is designed to exclude dirt and moisture from entering the cylinder and to collect traces of fluid passing the rod seal.Opposite the wiper
- Axial Cross Section or Thickness: 0.2756 to 0.5512 inch
- Housing Bore Diameter or Seal O.D.: 0.7087 to 7.72 inch
- Maximum Operating Speed: 787 ft/min
- Operating Temperature: -49 to 230 F
-
Supplier: Precision Associates Incorporated
Description: Precision Associates' Linear Style Wipers are similar to AN Wipers, but with a slightly heavier base.
- Construction: All Rubber or Polymer
- Shaft O.D. or Seal I.D.: 0.3750 to 2.12 inch
- Wiper or Scraper: Wiper
-
Supplier: Precision Associates Incorporated
Description: Precision Associates AN Rod Wipers are made to the exact dimmensions specified on Military drawing MS 28776.
- Construction: All Rubber or Polymer
- Shaft O.D. or Seal I.D.: 0.3750 to 2.75 inch
- Wiper or Scraper: Wiper
-
Supplier: Hallite Seals International Ltd.
Description: The Hallite 834 wiper is designed to snap into a standard housing and provide reliable medium duty dirt exclusion. The proportions of the wiping lip ensure that it remains in contact with the rod surface to remove all deposits of mud and other forms of contamination except those found
- Axial Cross Section or Thickness: 0.2756 to 0.3937 inch
- Housing Bore Diameter or Seal O.D.: 1.02 to 5.98 inch
- Maximum Operating Speed: 787 ft/min
- Operating Temperature: -49 to 230 F
-
Supplier: Hallite Seals International Ltd.
Description: The Hallite 38 wiper has been designed so that the proportions of the wiping lip ensure it maintains contact with the rod surface to remove heavily deposited mud, ice etc. The outside diamter contacts the housing and has a seealing lip to prevent moisture entering the groove.A
- Axial Cross Section or Thickness: 0.2756 to 0.7087 inch
- Housing Bore Diameter or Seal O.D.: 0.9449 to 19.29 inch
- Maximum Operating Speed: 787 ft/min
- Operating Temperature: -40 to 248 F
-
Supplier: Precision Polymer Engineering Ltd.
Description: Wiper seals are typically used in conjunction with other sealing elements. A wiper seals primary function is to provide a physical barrier to limit the ingress of moisture, dirt and other contaminants into the primary sealing system, preventing damage to hardware and
- Construction: All Rubber or Polymer
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Nitrile - Highly Saturated (HNBR)
- Wiper or Scraper: Wiper, Scraper
-
Supplier: Daemar Inc.
Description: Metric Wipers are the same as Rod wipers just are available in metric sizes.Some styles are are capable in surviving hostile environments.
- Seal Type: Hydraulic / Pneumatic Seal
-
Supplier: Greene, Tweed & Co.
Description: (ring). The elastomeric energizer is situated on the centerline, reducing the tendency to roll out if the primary seal leaks. These designs can be a direct replacement for M28776 scrapers. 2280 Scraper: A bidirectional wiper utilizing an O-ring energizer. These designs fit
- Housing Bore Diameter or Seal O.D.: 0.7900 to 13.49 inch
- Seal Type: Oil / Grease Seal, Exclusion Seal
- Sealing Element or Lip Material: Polytetrafluoroethylene (PTFE- Teflon®, etc.)
- Sealing Orientation and Direction: Internal / Rod Seal
-
Supplier: Hallite Seals International Ltd.
Description: The Hallite 846 wiper is designed to exclude dirt and moisture from entering the cylinder and to collect traces of fluid passing the rod seal. One special feature of the wiper design are the thin membranes which burst when excessive fluid pressure is trapped between teh
- Axial Cross Section or Thickness: 0.3425 to 0.4606 inch
- Housing Bore Diameter or Seal O.D.: 1.26 to 4.33 inch
- Maximum Operating Speed: 787 ft/min
- Operating Temperature: -49 to 230 F
-
Supplier: SAE International
Description: To provide a method for determining the capability of a wiper seal used on hydraulic cylinders, to withstand cyclic movement of the sealing surface in a contaminated environment and restrict the passage of particulate contaminant under conditions of zero side load. To verify whether or
-
Supplier: SAE International
Description: To provide a method for determining the capability of a wiper seal used on hydraulic cylinders, to withstand cyclic movement of the sealing surface in a contaminated environment and restrict the passage of particulate contaminant under conditions of zero side load.
-
Supplier: Accuris
Description: Cylinder Rod Wiper Seal Ingression Test
-
Supplier: FTL Technology
Description: design. Since pressures are generally limited to 10 bar, the use of single system rod, piston and wiper seals are typically used. Rod Seals Rod seals are installed in reciprocating equipment to retain compressed air or oil under high pressure. They
- Maximum Operating Pressure: 145 psi
- Wiper or Scraper: Wiper
-
Supplier: IBT Industrial Solutions
Description: for your pneumatics and fluid power needs. Contact IBT Industrial Solutions today to learn more about how our fluid power solutions can increase your company’s efficiency. SEALS AND REPAIR KITS Rod Seals Piston Seals Wipers Wear Guides Repair Kits O-Rings Back Up
- Wiper or Scraper: Wiper
-
Supplier: IBT Industrial Solutions
Description: mobile and industrial hydraulic applications to drive their business. Contact IBT Industrial Solutions today to learn more about how our fluid power solutions can increase your company’s efficiency. SEALS AND REPAIR KITS Rod Seals Piston Seals Wipers Wear Guides
- Wiper or Scraper: Wiper
-
Supplier: FTL Technology
Description: Pneumatic Rod seals are typically used in pneumatic cylinders for sealing pressurised air. Rod Seals work together with wiper seals to protect a hydraulic system against external contaminants, including dirt, dust and outside weather conditions. Rod
- Maximum Operating Pressure: 5802 psi
- Maximum Operating Speed: 98.43 to 984 ft/min
- Operating Temperature: -40 to 392 F
- Seal Type: Hydraulic / Pneumatic Seal
-
Supplier: Radwell International
Description: ROD WIPER SEAL. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: Radwell International
Description: SEAL, 74 STYLE ROD WIPER, ROD 5/8, OD 15/16 . FREE 2 YEAR RADWELL WARRANTY
-
Supplier: FTL Technology
Description: FTL Technology supplies hydraulic seal solutions for light, medium and heavy duty industrial applications. In the case of light and medium duty applications, the application parameters generally allow the use of single element rod, piston and wiper seals. What is a
- Seal Type: Hydraulic / Pneumatic Seal
- Sealing Element or Lip Material: Fluoroelastomer (FKM - Viton®, Fluorel®, etc.), Nitrile (NBR - Buna-N), Polytetrafluoroethylene (PTFE- Teflon®, etc.), Polyurethane / Urethane
- Sealing Orientation and Direction: Internal / Rod Seal, External / Piston Seal
-
Supplier: Radwell International
Description: SEAL, ROD WIPER SEAL, 35X43X5MM. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: Radwell International
Description: SEAL, ROD WIPER SEAL, 35X43.6X5 MM. FREE 2 YEAR RADWELL WARRANTY
-
Supplier: International Hydraulics
Description: , positive seal. Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. Rod Wiper - Heavy duty metal encased, nitrile preventing contaminants from entering cylinder. Threaded
- Bore Size: 4 inch
- Cylinder Style: Tie-rod
- Mounting Options: Clevis
- Rated Load/Force: 37699 lbs
-
Supplier: International Hydraulics
Description: , positive seal. Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. Rod Wiper - Heavy duty metal encased, nitrile preventing contaminants from entering cylinder
- Bore Size: 3.5 inch
- Cylinder Style: Tie-rod
- Mounting Options: Clevis
- Rated Load/Force: 28863 lbs
-
Supplier: International Hydraulics
Description: , positive seal. Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. Rod Wiper - Heavy duty metal encased, nitrile preventing contaminants from entering cylinder. Threaded
- Bore Size: 3 inch
- Cylinder Style: Tie-rod
- Mounting Options: Clevis
- Rated Load/Force: 21206 lbs
-
Supplier: International Hydraulics
Description: , positive seal. Rod Cap & Clevis Cap - Ductile iron comes with drilled oil passages, offering increased bearing surface for high shock and side load applications. Rod Wiper - Heavy duty metal encased, nitrile preventing contaminants from entering cylinder
- Bore Size: 2.5 inch
- Cylinder Style: Tie-rod
- Mounting Options: Clevis
- Rated Load/Force: 14726 lbs
-
Supplier: Greene, Tweed & Co.
Description: These œself-venting� O-ring energized scrapers are designed to provide maximum exclusion capabilities when used in Type I or Type II gland configurations of SAE AS4088 and AS4052. The same rod and gland diameters apply for both AS4088 and AS4052 (AS4716 glands with
- Construction: All Rubber or Polymer
- Housing Bore Diameter or Seal O.D.: 0.4230 to 15.97 inch
- Shaft O.D. or Seal I.D.: 0.2480 to 15.5 inch
- Wiper or Scraper: Wiper, Scraper
Find Suppliers by Category Top
Featured Products Top
-
something we make everyday, we make seals in any size needed. Used as piston, rod, or face seals, the CTG spring energized seal is engineered to meet your exact specifications and design intent. Rotary In rotary applications, lip (read more)
Browse Datasheets for CT Gasket & Polymer Co., Inc. -
energized seal can be created for even the toughest of reciprocating services. With the optional wiper surfaces the seals will maintain a clean sealing surface in even the dirtiest environments. Whether you need a rod or piston seal, we have the team to find the best seal for your success. Face (read more)
Browse Dynamic Seals Datasheets for CT Gasket & Polymer Co., Inc. -
mass transfer efficiency.? Rings and Seals Rider and piston rings: Maintain alignment and minimize friction between piston and cylinder wall in compressors or pumps. Packing and oil wiper rings: Seals shaft entry points and prevents oil (read more)
Browse Resins and Compounds Datasheets for AGC Chemicals Americas, Inc.
Conduct Research Top
-
Implenting RFID with Tie-Rod Cylinders
The shutdown timing is critical, and the maintenance manager wants to make sure everything goes smoothly. Hydraulic cylinders are a critical part of the process, and during the shutdown, the manager has to replace a hydraulic cylinder's rod end wiper and seal to ensure continual future performance.
More Information Top
-
Dynamical Friction Phenomena and Friction‐Induced Vibrations in Pneumatic Sealings
In many cases, the sealing lips are sharp-edged, particularly in rod wiper seals in pneumatic systems.
-
Better Than Metal
PTFE-based rod-guide bushings outperform those made from bronze that can score the shaft over time, eventually wearing the rod wiper seal .
-
Reinforced and Nonreinforced Reaction Injection Molding Machines for Production of Polyurethane Specimens for Material Development, Evaluation, and Quality Con...
Rod Wiper Seal Bushing .
-
Advanced Strategies for the Monitoring and Control of Water Contamination in Oil Hydraulic Fluids
9 Spray Contamination - When machines are exposed to rain, process spray or wash-down spray, there is a risk of ingression past rod wiper seals and reservoir gaskets.
-
SHEAR STRENGTH MEASURING EQUIPMENT EVALUATION AT THE COLD TEST FACILITY
Opinion among subject matter experts was that the process would be improved by preassembling the mounting plate, rod wiper seal , initial cone set and T-Bar, and then attaching the preassembled cone penetrometer unit to the riser.
-
Cavitating Flows in Hydraulic Multidimensional CFD Analysis
Cylinder Rod Wiper Seal Ingression Test .
Indicates content that may require registration and/or purchase.