-
Supplier: Precipart
Description: optimal solution that is designed for manufacturability. Our precision gears typically range in size from 6mm (.24”) to 102mm (4”). Precipart designs, engineers, validates and optimizes custom solutions to meet the most challenging program requirements. Our high precision gears
- Gear Type: Spur Gear
- Metal: Aluminum, Brass, Bronze, Carbon / Alloy Steel, Other Metal
- Plastic: Nylon, Other Plastic
-
Supplier: QTC METRIC GEARS
Description: Module 4, 20 Tooth Ground Steel Spur Gear
- Bore Diameter (if applicable): 28 mm
- Design Units: Metric
- Face Width: 40 mm
- Gear Type: Spur Gear
-
Supplier: QTC METRIC GEARS
Description: Module 4, 48 Tooth Ground Steel Spur Gear
- Bore Diameter (if applicable): 40 mm
- Design Units: Metric
- Face Width: 40 mm
- Gear Type: Spur Gear
-
-
Supplier: QTC METRIC GEARS
Description: Module 4, 40 Tooth Ground Steel Spur Gear
- Bore Diameter (if applicable): 45 mm
- Design Units: Metric
- Face Width: 40 mm
- Gear Type: Spur Gear
-
Supplier: QTC METRIC GEARS
Description: Module 4, 15 Tooth Ground Steel Spur Gear
- Bore Diameter (if applicable): 25 mm
- Design Units: Metric
- Face Width: 40 mm
- Gear Type: Spur Gear
-
Supplier: KHK USA, Inc.
Description: Module 4, 17 Tooth, Polyurethane, Lubricating Spur Gears
- Bore Diameter (if applicable): 12 mm
- Design Units: Metric
- Face Width: 40 mm
- Gear Center: Center Bore
-
Supplier: KHK USA, Inc.
Description: Module 4, 17 Tooth, Left Hand, Polyurethane, Lubricating Spur Gears
- Bore Diameter (if applicable): 12 mm
- Design Units: Metric
- Face Width: 40 mm
- Gear Center: Center Bore
-
Description: Module 0.4, 50 Teeth, 20° Pressure Angle, Acetal / No Insert Spur Gear
- Bore Diameter (if applicable): 4 mm
- Design Units: Metric
- Face Width: 0.1969 inch
- Gear Type: Spur Gear
-
Description: Module 0.4, 85 Teeth, 20° Pressure Angle, Acetal / No Insert Spur Gear
- Bore Diameter (if applicable): 6 mm
- Design Units: Metric
- Face Width: 0.1969 inch
- Number of Teeth: 85
-
Description: Module 0.4, 25 Teeth, 20° Pressure Angle, Acetal / No Insert Spur Gear
- Bore Diameter (if applicable): 4 mm
- Face Width: 5 mm
- Gear Type: Spur Gear
- Number of Teeth: 25
-
Supplier: Grob, Inc.
Description: Gears Available in mild to medium carbon steel, as well as aluminum Available in either 14.5° or 20° pressure angles Diametral Pitches ranging from 6 to 48 Modules ranging from .6 to 4 Outside
- Design Units: English
- Metal: Aluminum, Carbon / Alloy Steel
- Pitch Diameter: 6 to 48 inch
- Pressure Angle: 14.5°, 20°
-
Supplier: ATLANTA Drive Systems, Inc.
Description: gives the machine designer the flexibility of choosing the desired level of rack precision to meet the application needs. These racks are available in straight (spur) and helical versions, in modules 2.0 through 12.0, in half meter and one meter lengths. These racks are ideal for high
- Design Units: Metric
- Face Width: 79 mm
- Gear Features: Anti-backlash
- Gear Type: Spur Gear, Rack
-
Supplier: RS Components, Ltd.
Description: Injection moulded acetal copolymer spur gears providing a wide range of gear ratios. Tensile strength 94N/mm². Hardness (Rockwell R) 110-120. 20° Pressure angle Module = 0.8 Number of Teeth = 18 Material = POM Bore Diameter = 4mm Hub Diameter = 8mm Pitch Diameter =
- Bore Diameter (if applicable): 4 mm
- Design Units: Metric
- Face Width: 4 mm
- Gear Type: Spur Gear
-
Supplier: ATLANTA Drive Systems, Inc.
Description: gives the machine designer the flexibility of choosing the desired level of rack precision to meet the application needs. These racks are available in straight (spur) and helical versions, in modules 2.0 through 12.0, in half meter and one meter lengths. These racks are ideal for high
- Design Units: Metric
- Direction: Right Hand
- Face Width: 24 mm
- Gear Features: Anti-backlash, Ground Teeth
-
Supplier: Andantex USA, Inc.
Description: . Features Four quality levels available, up to Hardened & Ground (AGMA 12) Nine standard Modules from Module 1.0 to 10.0 (Diametral Pitch, P, 25.4 to 2.54) Standard rack lengths up to 2.00 meters; longer travel lengths can easily be achieved by mounting the racks end-to-end
- Gear Type: Rack, Pinion
- Tooth Form: Straight Teeth
Find Suppliers by Category Top
Featured Products Top
-
To meet your requirements, KHK stock Spur Gears are made in a variety of materials, configurations, modules and numbers of teeth. KHK offers Spur Gears that allow secondary operations to be performed on the bores, shafts, outside diameters, keyways and set screws. Spur Gears that are fine (read more)
Browse Spur Gears Datasheets for KHK USA, Inc. -
Spur Gears 1. European Standard M1, M1.5, M2, M2.5 M3, M4, M5, M6 (read more)
Browse Gears Datasheets for Hangzhou Chinabase Machinery Co., Ltd. -
Customized gear according to customers sample or drawing Module: M0.5-M30 Material: Carbon steel, Alloy steel, stainless steel, Nylon Heat treatment: Teeth Induction hardened,Nitriding, Carbonization, Carbonitriding, Surface treatment: Black Oxide, Zinc Plated,Nickel Plated etc (read more)
Browse Spur Gears Datasheets for Chengdu Leno Machinery Co., Ltd. -
Material: Stainless steel Surface treatment: Black Oxide Heat treatment: Teeth Induction hardening Module: M1-M8 Can also be customized according to drawings or samples (read more)
Browse Gears Datasheets for Chengdu Leno Machinery Co., Ltd. -
Module: M0.5-M30 Material: Carbon steel, Alloy steel, stainless steel, Nylon Heat treatment: Teeth Induction hardened,Nitriding, Carbonization, Carbonitriding Surface treatment: Black Oxide, Zinc Plated,Nickel Plated etc (read more)
Browse Gears Datasheets for Chengdu Leno Machinery Co., Ltd. -
1/16”, 3/32”, 1/8”, 3/16”, with bore diameters of 1/8”, 3/16”, 1/4”, 3/8”. We carry spur gears with Fairloc® hubs, clamp hubs, brass inserts and set screws. If a standard spur gear doesn’t meet your specific requirements, our (read more)
Browse Spur Gears Datasheets for Stock Drive Products & Sterling Instrument - SDP/SI -
-
Precision internal gears from QTC Metric Gears are stocked in 22 sizes in modules 1 through 3. These 20° pressure angle internal gears, identified as the (read more)
Browse Gears Datasheets for QTC METRIC GEARS -
manufacturer,china Spur Gears,Bevel Gears,Worm Gears,Helical Gears,Automobile Gears,Agricultural machinery gears,Spiral Bevel Gears,Helical Bevel Gear,Racks. 1.Spur Gears European Standard American Standard 2.Bevel Gears (read more)
Browse Bevel and Miter Gears Datasheets for Hangzhou Chinabase Machinery Co., Ltd. -
China Gears and racks manufacturer, we can supply: Spur Gears, Bevel Gears, Worm Gears, Helical Gears, Automobile Gears, Agricultural machinery gears, Spiral Bevel Gears, Helical Bevel Gear, Rack (read more)
Browse Gears Datasheets for Hangzhou Chinabase Machinery Co., Ltd.
More Information Top
-
Materials Processing Technology II
According to the research, to form such spur gear with module 4 and breadth 59mm studied in this paper, the hollow diameter should be 18mm and the tooth reduction should be 1.2mm.
-
Numerical Simulation on Precision Forging Process for Spur-Gear with Large Module
According to the research, to form such spur gear with module 4 and breadth 59mm studied in this paper, the hollow diameter should be 18mm and the tooth reduction should be 1.2mm.
-
Introduction to Gear Technology (.pdf)
Conventional and simplified representation of gears and gear pairs [4] Series of modules for gears – Modules for spur gears [ 4 ] Series of modules for gears – Modules for cylindrical worm gear transmissions [4] Basic rack tooth profiles for involute teeth of…
-
Simple Stress Sensor: Utilizing of Stretcher Strains
The experiment was carried out with a standard 4 -mm module spur gear with 30 teeth, a pressure angle of 20~ and a gear width of 10 mm.
-
Methods for detecting fatigue cracks in gears
A carburised spur gear pair of module 4 mm was in each gear unit, the pinion had 19 and the wheel 34 teeth.
-
Development of a questionnaire to test the impact of scarce materials on design in Developing Countries
Gears (stocked In storage loset) 40 4 Nylon spur gear , module 1.
-
Adaptive Wavelet Transform Method to Identify Cracks in Gears
Each gear unit had a carburised spur gear pair ( module : 4 mm).
-
Engineering Asset Lifecycle Management
The examined gearbox was equipped with spur gears , with a 4 mm module , having 27 teeth in the pinion and 35 teeth in the gear.
-
Roombots-mechanical design of self-reconfiguring modular robots for adaptive furniture
…DC-motor-gearbox, pinions are made from plastic with metric modules (1) FH2342 DC- motor, to be used in the outer half-spheres (2) thin-section ball bearing (3) first pinion, module m = 0.5 ( 4 ) spur gear set m = 0.5…
-
Precision Forging of Casting AZ31 Magnesium Inner Spur-Gear
Abstract:The whole precision forging process of spur - gear with large module (module: 4 ) including warm forging, cold extrusion and cold sizing is...