2-Bolt Flange Mounted Bearings
from RS Components, Ltd.
Acetal flanged housed bearing,10mm ID [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.3937
- Design Units: Metric
- Flange Width: 1.26
from RS Components, Ltd.
Acetal flanged housed bearing,20mm ID [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.7874
- Design Units: Metric
- Flange Width: 1.69
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.7874
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.9843
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.18
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.38
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.57
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.9843
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.18
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.38
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.7874
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.9843
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.18
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.38
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.57
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.7874
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.7874
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.9843
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.38
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.57
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.7874
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.9843
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.18
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.38
- Design Units: Metric
from RS Components, Ltd.
Palier auto aligneur [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 1.57
- Design Units: Metric
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.3150
- Design Units: Inch
- Flange Length / Diameter: 1.75
from Boston Gear
Overview. Boston Gear's comprehensive selection of flanged bearings includes non-metallic inserts in a non-metallic base for washdown service, spherical bearings with extended inner races featuring setscrews, or eccentric locking collars in stamped steel, ductile iron, or cast iron housings. [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.5000 to 1.25
- Bearing Type: Plain
- Housing: Stainless Steel
from Climax Metal Products Company
Heavy gauge one-piece housing has a rust-proof plated finish. Bearing insert with 2 set screws has a longer inner race for added support. Extra thick non-conductive rubber liner corrects misalignment up to 2 ° while reducing vibration and noise. [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000 to 1
from Spyraflo, Inc.
Flange-Mounts are widely used in applications requiring field service or applications which are not suitable for clinching. Features. ±5 ° Static self-alignment option. Electrically conductive. Easy installation and multiple bearing choices. Special flange design service. High and Low... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Flange Type: Non-piloted
from Quality Bearings & Components
Plastic Two-Bolt | With Insert Ball Bearings. FLANGE MOUNTING BLOCKS – INCH. • Polyester Block. • 316 Stainless Steel Balls. • Acetal Ball Bearings. • Removable Insert [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Plain
- Shaft Size: 0.5000
from SKF/North America
Two-bolt cast iron flange units flange units support shafts through walls, bulkheads and other flat surfaces, but have a more compact two-bolt design. This series is supplied with a grease fitting for lubrication and provide for initial bearing alignment. [See More]
- Mtg Configuration: 2-Bolt
- Flange Type: Non-piloted
- Bearing Type: Ball
- Design Units: Inch; Metric
from Lucas Industrial
Normal duty eccentric collar type [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Ball
- Design Units: Inch
from Bunting Bearings, LLC
The unique, patented Lube-Align bearing products are made of self-lubricating, self-aligning SAE 841 bronze bearings permanently cast inside a 'fast mount' aluminum housing. Here's how Lube-Align bearings effect 4-way savings for OEM and maintenance engineers: Self-Alignment. A special casting... [See More]
- Mtg Configuration: 2-Bolt; 2 Bolt Flange Mount
- Design Units: Inch
- Bearing Type: Plain
- Shaft Size: 0.1260 to 2
from RegalRexnord
5/8" Mounted Ball Bearing, Standard Duty, Cast Iron 2-Bolt Flange Block, Centrik-Lok CL Locking Device, Free Running, 10% Grease Filled [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from igus® inc.
The igubal split 2-hole flange bearings and split bearing inserts provide a special installation option that significantly cuts downtime. Upon the wear and tear of single-piece bearings, replacement may require significant adjustments based on accessibility. The igubal split solutions provide a... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Split Bearing
- Bearing Type: Plain
- Design Units: Metric
from Emerson Bearing Co.
Medium duty with set screw lock. Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic and Nickel plating. B-type seals or L3 triple lip seals available for extra sealing needs. Wide inner race bearing... [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.8750
- Design Units: Inch
- Flange Length / Diameter: 5.81
from Triangle Manufacturing Company
Our two-bolt side flange mounted bearings contain a self-aligning reservoir bearing with either an oil cup or grease fitting. Manufactured in 16-gage galvanized steel, this versatile mount has been one of our most popular styles due to its wide use in mechanical equipment where light to medium loads... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Plain
- Shaft Size: 0.5000
from Magnus Mobility Systems, Inc.
Jilson Bearing Housings – made of high-grade solid PBT thermoplastic polyester – are the durable, corrosion-resistant replacement for conventional metal housings. These maintenance-free housings have excellent mechanical strength, stiffness and dimensional stability – and they... [See More]
- Mtg Configuration: 2-Bolt
- Flange Type: Non-piloted
- Bearing Type: Roller
- Design Units: Inch
from OILES America Corporation
Oiles #80 is a proprietary blend of polyacetal resins and uniformly dispersed bearing lubricants. There are several derivatives of this material, each specifically formulated to satisfy a wide variety of application requirements. Oiles #80 is available in both flanged straight bore bushing and... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Flange Type: Non-piloted
from KG International FZCO
KG has developed numerous Automotive Bearings for: Wheel Applications. Clutch Releases. Steering Assemblies. Car Air Conditioners. Hub Unit Assemblies. Many type of Bearings have been designed to meet the specific requirements of Automotive industry. They are primarily Angular Contact Ball Bearings,... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Metric
- Bearing Type: Roller
- Shaft Size: 0.9843 to 3.94
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000
from Climax Metal Products Company
One-piece housing has a rust-proof plated finish. Bearing insert is encased in a non-conductive, oil resistant rubber liner which corrects up to a 2 ° misalignment while reducing vibration and noise. Includes 2 set screws. [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000 to 1
from Spyraflo, Inc.
Flange-Mounts are widely used in applications requiring field service or applications which are not suitable for clinching. Features. ±5 ° Static self-alignment option. Electrically conductive. Easy installation and multiple bearing choices. Special flange design service. High and Low... [See More]
- Mtg Configuration: 2-Bolt
- Flange Type: Non-piloted
- Bearing Type: Plain
- Design Units: Inch
from Quality Bearings & Components
Standard Duty | Two-Bolt. FLANGE MOUNTING BLOCKS-SET SCREW TYPE – INCH. • Cast Iron Housing. • Dual Seal Type [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Plain
- Shaft Size: 0.5000
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, Cast Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from igus® inc.
xiros ® flange bearings with stainless steel or glass balls are a combination of xiros ® plastic ball bearings and igubal ® housings. The self-aligning bearings were developed for maintenance-free applications in conveyor belts, cam rollers and support housings. The lightweight,... [See More]
- Mtg Configuration: 2-Bolt; 4-Bolt
- Shaft Size: 0.3150 to 0.4724
- Bearing Type: Plain
- Flange Length / Diameter: 2.05 to 2.91
from Emerson Bearing Co.
Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic and Nickel plating. K-type seals or L3 triple lip seals available for extra sealing needs. Narrow inner race bearing. [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.6250
- Design Units: Inch
- Flange Length / Diameter: 4.41
from Triangle Manufacturing Company
Our miniature center flange mounted bearings are designed for lighter duty applications or where smaller types of equipment impose space limitations. This design is somewhat stronger than side flange mountings, but requires a hole in the mounting panel so the assembly may protrude slightly to the... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000
from Climax Metal Products Company
Ideal for applications requiring strong load support in limited mounting area. Solid zinc die-cast housing is non-corrosive and lightweight. Securely retains bearing by pressing the lip 360 ° over the outer race. Includes 2 set screws. [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000 to 1
from Quality Bearings & Components
Bronze BearingFLANGE-MOUNTED BEARINGS - INCH. SAE-840 Oil-Impregnated Bronze Bearing. Sintered Aluminum Housing. Self-Aligning Type Features: Flange-mounted. Self-aligning to ±5 °. Lightweight Operating Temperature: -20 °F to +200 °F Shafts should be hardened to Rc 95 with 16... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, Cast Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Nickel Plated Housing [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from Emerson Bearing Co.
Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic and Nickel plating. K-type seals or L3 triple lip seals available for extra sealing needs. Round bolt holes. Narrow inner race bearing. Also... [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.6250
- Design Units: Inch
- Flange Length / Diameter: 3.19
from Triangle Manufacturing Company
Cushion flange mounted bearings are designed for side mountings on panels, plates and housing, or anywhere that may require sound and vibration suppression. Used to provide load support for that axis, cushion flange mountings hold a variety of self-aligning bearing sizes. The cushion itself is made... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000
from Climax Metal Products Company
Two-piece housing unit. USDA and FDA approved. For wash-down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact, and abrasion. [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Plain
- Shaft Size: 0.5000 to 1
from Quality Bearings & Components
Delrin FLANGE-MOUNTED PRESSBEARINGS - INCH. Delrin Bearing. Carbon Steel Flange & Retainer, Black Oxide Finish Features: Flange-mounted. Self-aligning to ±5 °. Self-Lubricating Operating Temperature: -40 °F to +300 °F SHAFT RECOMMEDATIONS:Finish: 16 μin. or finer.Material:... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from RegalRexnord
5/8" Mounted Ball Bearing, Standard Duty, Cast Iron 2-Bolt Flange Block, Setscrew Locking, Clearance Seal, Tight Fit of Outer Race in Housing [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from Emerson Bearing Co.
Standard duty with set screw lock. Available with: Set screw or eccentric locking collar. Corrosion resistant housing and bearing options include Cast iron, Stainless Steel, Thermoplastic, and Nickel plating. B-type seals or L3 triple lip seals available for extra sealing needs. Wide inner race... [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.6250
- Design Units: Inch
- Flange Length / Diameter: 4.41
from Triangle Manufacturing Company
At Triangle, our two-bolt side flange mounted bearings contain a self-aligning bearing of either nylon, sintered bronze or sintered iron. Manufactured in 14-gage galvanized steel, this mount has more alignment variation possibilities than our FL (1/2 ”-7/8 ”) series mounted bearing. Due... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000
from Climax Metal Products Company
Two-piece housing has a rust-proof plated finish. Spring-lid oil cap is at 45 ° and can be mounted vertically or horizontally. Porous flanged bronze bearing is press-fit in sturdy zinc die-cast sphere with felt strip for lubrication. Includes 2 rubber grommets to reduce vibration and noise. [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Plain
- Shaft Size: 0.5000 to 1
from Quality Bearings & Components
Sintered Bronze FLANGE-MOUNTED PRESSBEARINGS - INCH. Oil-Impregnated Sintered Bronze Bearing. Carbon Steel Retainer, Black Oxide Finish Features: Flange-mounted. Self-aligning to ±5 °. Self-Lubricating. *To be discontinued when present stock is depleted. [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, Cast Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from Triangle Manufacturing Company
Our two-bolt side flange mounted bearings contain an oil impregnated bearing of either sintered bronze or sintered iron. Manufactured in 13-gauge galvanized steel and with either round or square mounting holes, this mount is larger than the FL or FJ (1/2 ”-7/8 ”) series mounts. Due to... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1.19
from Climax Metal Products Company
Entire unit is UHMW-PW. USDA and FDA approved. Ideal for wash-down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact, and abrasion. Interchangeable with most metal units. [See More]
- Mtg Configuration: 2-Bolt
- Shaft Size: 0.5000 to 1
- Design Units: Inch
- Housing: Plastic
from Quality Bearings & Components
Needle Roller Bearing FLANGE-MOUNTED PRESSBEARINGS - INCH. Drawn Cup Needle Roller Bearing. Carbon Steel Housing, Black Oxide Finish Features: Flange-mounted. Nonaligning Operating Temperature: -22 °F to +248 °F SHAFT RECOMMEDATIONS: Shafts should be hardened to Rc 58 with 16 μin. finish. [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Needle Roller
- Shaft Size: 0.2495 to 0.2500
from RegalRexnord
5/8" Mounted Ball Bearing, Standard Duty, Cast Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Clearance Seal [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from Triangle Manufacturing Company
At Triangle, our two-bolt side flange mounted bearings contain a self-aligning bearing of either nylon, sintered bronze or sintered iron and is manufactured in 16-gauge galvanized steel. [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from Reid Supply
Mounted bearings and housings with rolling bearings support a rotating shaft, which can be bolted on a machine frame or any other substurcture. There is no need to precisely machine a bearing housing in a surrounding casing. This makes these solutions cost-efficient and easy to use, while providing... [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.5000
from Quality Bearings & Components
Needle Roller Bearing FLANGE-MOUNTED PRESSBEARINGS - INCH. Drawn Cup Needle Roller Bearing. Carbon Steel Housing, Black Oxide Finish. Self-Aligning Type Features: Flange-mounted. Self-aligning to ±5 ° Operating Temperature: -22 °F to +248 °F. NOTE: Hardened steel shaft required. [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Needle Roller
- Design Units: Inch
from RegalRexnord
1" Mounted Ball Bearing, Standard Duty, Cast Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1
from Triangle Manufacturing Company
At Triangle, our miniature side flange mounted bearings contain a self-aligning bearing of either nylon, sintered bronze or sintered iron. Manufactured in 16-gage galvanized steel, this two-bolt mount has been one of our most popular styles due to its wide use in mechanical equipment where... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Spherical or Self-aligning bearing.
- Bearing Type: Plain
- Design Units: Inch
from Quality Bearings & Components
FLANGETTE UNIT – INCH. • Chrome Steel Bearing. • 2-pc. Pressed Steel Housing. • Collar and Set Screw. NOTES: 1. Except for bore, bearings inspected to ABEC-1 tolerances. Bore tolerance. applies prior to collar assembly. 2. Recommended shaft tolerance: Nominal bore size -.0005". [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.3750
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, High-Test Cast Iron 2-Bolt Flange Block, Setscrew locking, Clearance Seal, Steel Retainer, Reversed Assembly, Nickel Plated Housing, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from Quality Bearings & Components
Steel Bearing. PILLOW FLANGE-MOUNTED BALL BEARINGS - INCH. High Chromium Alloy Steel Bearing. Carbon Steel, Black Oxide Finish Flange & Retainer. Features: Self-aligning to ±5 °. Pillow flange-mounted. Double shields. ABEC 3. Specifications: Max. Speed: 40000 rpm. Max. Radial Load:... [See More]
- Mtg Configuration: 2-Bolt
- Bearing / Housing Features: Offset Hole Pattern; Spherical or Self-aligning bearing.
- Bearing Type: Ball
- Design Units: Inch
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Non-relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from RegalRexnord
1 1/8" Mounted Ball Bearing, Standard Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Non-relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1.12
from RegalRexnord
1" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Relubricatable, Nickel Plated Housing, Food Grade Grease, Black Oxide Coated IR and OR [See More]
- Mtg Configuration: 2-Bolt
- Shaft Securing: Setscrew
- Bearing Type: Ball
- Lubrication: Relubricatable
from RegalRexnord
1 3/8" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Nickel Plated Housing, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Shaft Securing: Setscrew
- Bearing Type: Ball
- Lubrication: Relubricatable
from RegalRexnord
5/8" Mounted Ball Bearing, Standard Duty, High-Test Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Non-relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from RegalRexnord
1" Mounted Ball Bearing, Standard Duty, High-Test Iron 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Non-relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from RegalRexnord
1" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Non Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1
from RegalRexnord
5/8" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from RegalRexnord
1" Mounted Ball Bearing, Intermediate Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1
from RegalRexnord
5/8" Mounted Ball Bearing, Standard Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Single Lip Contact Seal, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.6250
from RegalRexnord
1 1/4" Mounted Ball Bearing, Standard Duty, High-Test Iron 2-Bolt Flange Block, Eccentric Cam Locking Collar, Triple Lip Contact Seal, Relubricatable [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 1.25
from RegalRexnord
3/4" Mounted Ball Bearing, Intermediate Duty, Polyamide 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.7500
from RegalRexnord
3/4" Mounted Ball Bearing, Intermediate Duty, Polyamide 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Stainless Steel Insert [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.7500
from RegalRexnord
3/4" Mounted Ball Bearing, Intermediate Duty, Polypropylene 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.7500
from RegalRexnord
3/4" Mounted Ball Bearing, Intermediate Duty, Polypropylene 2-Bolt Flange Block, Setscrew Locking, Single Lip Contact Seal, Stainless Steel Insert [See More]
- Mtg Configuration: 2-Bolt
- Design Units: Inch
- Bearing Type: Ball
- Shaft Size: 0.7500