RoHS Compliant EMI Filters and RFI Filters
Last Updated: April 1, 2025
Description
RoHS Compliant EMI (Electromagnetic Interference) Filters and RFI (Radio Frequency Interference) Filters are designed to suppress or attenuate unwanted electromagnetic and radio frequency noise in electronic circuits. These filters ensure that electronic equipment does not emit excessive electromagnetic noise and is protected from external interference, thereby maintaining the integrity of the device's operation.
Working Principle
EMI and RFI filters work by using a combination of inductors and capacitors to block or reduce unwanted noise. Inductors are used to eliminate common-mode interference, while capacitors shunt high-frequency noise to the ground. This combination effectively reduces both in-phase and out-of-phase noise, ensuring that the equipment operates without interference from external sources. These filters are crucial for meeting regulatory compliance and ensuring the reliable operation of electronic devices by preventing noise from affecting sensitive components.
Applications
RoHS Compliant EMI and RFI Filters are used in a variety of applications, including:
- Switch Mode Power Supplies: To prevent noise from affecting the power supply's performance.
- Monitors and Electronic Instruments: To ensure accurate readings and display without interference.
- Programmable Logic Controllers and Weighing Scales: To maintain precise control and measurement.
- Personal Computer Periphery and Office Automation Equipment: To prevent interference with data processing and communication.
- Microwave Equipment: To avoid disruption in signal transmission and reception.
Advantages over other EMI Filters and RFI Filters
RoHS Compliant filters offer the advantage of being environmentally friendly by adhering to the Restriction of Hazardous Substances directive, which limits the use of certain hazardous materials. This compliance ensures that the filters are safer for both the environment and human health, without compromising on performance.
Limitations
One limitation of RoHS Compliant EMI and RFI Filters is that they may have a higher initial cost due to the use of alternative materials that comply with RoHS standards. Additionally, these filters might not be suitable for all applications, particularly those requiring extremely high levels of attenuation or operating in very harsh environments.
Considerations
When selecting RoHS Compliant EMI and RFI Filters, it is important to consider the initial costs, which may be higher due to compliance with environmental standards. Operating expenses are generally low, as these filters are designed for durability and long-term use. However, regular maintenance and replacement costs should be factored in, especially in applications with high levels of interference. Durability and accuracy are typically high, but it is essential to ensure that the filter specifications match the specific requirements of the application to achieve optimal performance.
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 3. Leakage Current (Max) (230VAC, 50Hz) : 3. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 3
- Standards and Certifications: ELV Directive; RoHS
from Nexperia B.V.
Common-mode ElectroMagnetic Interference (EMI) filters with integrated bidirectional ElectroStatic Discharge (ESD) protection for one, two and three differential channels. The devices are designed to provide low insertion loss for differential high-speed signals on each channel while unwanted... [See More]
- Package / Mounting: OL-PCMF1HDMI2BA-C
- Standards and Certifications: RoHS
- Rated Voltage: 15000
from DigiKey
FILTER RC 1KOHM/12PF ESD SMD [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from Win Source Electronics
Manufacturer: Mini-Circuits. Category: Filters -Ceramic Filters. Series: LFCW. Package: Tape & Reel (TR) Cut Tape (CT). Product Status: Active. Frequency: 11.9GHz Cut Off. Impedance: 50Ohm. Mounting Type: Surface Mount. Package / Case: 0603 (1608 Metric), 4 PC Pad. Size / Dimension: 0.063" L x... [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from RS Components, Ltd.
Roxburgh EMC PMF6 IEC Filter [See More]
- Package / Mounting: Free standing
- Standards and Certifications: RoHS
- Operating Temperature: 85
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 15. Leakage Current (Max) (230VAC, 50Hz) : 3. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 15
- Standards and Certifications: ELV Directive; RoHS
from Nexperia B.V.
Common-mode ElectroMagnetic Interference (EMI) filters with integrated bidirectional ElectroStatic Discharge (ESD) protection for one, two and three differential channels. The devices are designed to provide low insertion loss for differential high-speed signals on each channel while unwanted... [See More]
- Package / Mounting: OL-PCMF2HDMI2BA-C
- Standards and Certifications: RoHS
- Rated Voltage: 15000
from DigiKey
FILTER RC 1KOHM/12PF ESD SMD [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN378-6-21 IEC Filter [See More]
- Package / Mounting: Solder
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 50. Leakage Current (Max) (230VAC, 50Hz) : 5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 50
- Standards and Certifications: ELV Directive; RoHS
from Nexperia B.V.
Common-mode ElectroMagnetic Interference (EMI) filters with integrated bidirectional ElectroStatic Discharge (ESD) protection for one, two and three differential channels. The devices are designed to provide low insertion loss for differential high-speed signals on each channel while unwanted... [See More]
- Package / Mounting: OL-PCMF3HDMI2BA-C
- Standards and Certifications: RoHS
- Rated Voltage: 15000
from DigiKey
FILTER RC(PI) 200 OHMS ESD SMD [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN389-2-21 IEC Filter [See More]
- Package / Mounting: Solder
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 1. Leakage Current (Max) (230VAC, 50Hz) : 3. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 1
- Standards and Certifications: RoHS
from Nexperia B.V.
2-lines (one differential channel) common-mode filter with integrated ESD protection up to 15 kV contact discharge, exceeding IEC 61000-4-2, level 4. The device can eliminate efficiently common-mode noise from USB 2.0 and other high-speed interfaces with differential lines. IP3319CX6 attenuates... [See More]
- Package / Mounting: OL-IP3319CX6
- Standards and Certifications: RoHS
- Rated Voltage: 15000
from DigiKey
FILTER RC(PI) 200 OHMS ESD SMD [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN394-2.5-05-11 IEC Filter [See More]
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 15. Leakage Current (Max) (230VAC, 50Hz) : 3. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 15
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
LC (Pi) EMI Filter 3rd Order Low Pass 1 Channel L = 186nH, C = 0.015 µF 63A Axial - Threaded Terminals [See More]
- Package / Mounting: Bolt Mount
- Standards and Certifications: RoHS
- Operating Temperature: -40 to 100
from RS Components, Ltd.
Schaffner FN394-6-05-11 IEC Filter [See More]
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 50. Leakage Current (Max) (230VAC, 50Hz) : 5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 50
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
LC (Pi) EMI Filter 3rd Order Low Pass 1 Channel 250A Axial - Threaded Terminals [See More]
- Package / Mounting: Bolt Mount
- Standards and Certifications: RoHS
- Operating Temperature: -40 to 100
from RS Components, Ltd.
Schaffner FN284-2-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 6. Leakage Current (Max) (230VAC, 50Hz) : 18. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 6
- Standards and Certifications: RoHS
from DigiKey
LC (Pi) EMI Filter 3rd Order Low Pass 1 Channel 75A [See More]
- Operating Temperature: -40 to 100
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN284-6-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 8. Leakage Current (Max) (230VAC, 50Hz) : 18. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 8
- Standards and Certifications: RoHS
from DigiKey
RC (Pi) EMI Filter 2nd Order Low Pass 8 Channel R = 100Ohms, C = 12pF (Total) 16-QFN [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN286-2-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 16. Leakage Current (Max) (230VAC, 50Hz) : 18. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 16
- Standards and Certifications: RoHS
from DigiKey
RC (Pi) EMI Filter 2nd Order Low Pass 4 Channel R = 100Ohms, C = 11pF 8-XFDFN Exposed Pad [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN286-6-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 6. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 6
- Standards and Certifications: RoHS
from DigiKey
LC (Pi) EMI Filter 3rd Order Low Pass 2 Channel L = 2nH, C = 100pF 6-UFDFN [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN284-1-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 8. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 8
- Standards and Certifications: RoHS
from DigiKey
LC (T-Type) EMI Filter 3rd Order Low Pass 1 Channel C = 0.033 µF 2A 1207 (3218 Metric), 3 PC Pad [See More]
- Operating Temperature: -40 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN284-4-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 10. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 10
- Standards and Certifications: RoHS
from DigiKey
RC (Pi) EMI Filter 4th Order Low Pass 4 Channel R = 22Ohms, C = 22pF 1608 (4021 Metric), Concave [See More]
- Operating Temperature: -25 to 85
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schaffner FN286-4-06 IEC Filter [See More]
- Package / Mounting: Faston
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 16. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 16
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 500mA 85VAC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Rated Voltage: 85
- Package / Mounting: DIN Rail
- Operating Temperature: -40 to 85
from RS Components, Ltd.
Schurter 3-101-140 IEC Connector [See More]
- Filter Type: Single Phase
- Standards and Certifications: RoHS
- Package / Mounting: Flange mount, screw mount
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 20. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 20
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 500mA 85V ~ 305VAC 47Hz, 63Hz Single Stage PC Pins [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: Through Hole
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schurter 3-101-142 IEC Connector [See More]
- Filter Type: Single Phase
- Standards and Certifications: RoHS
- Package / Mounting: Flange mount, screw mount
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 25. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 25
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 500mA 85V ~ 305VAC 47Hz, 63Hz Single Stage PC Pins [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: Through Hole
- Standards and Certifications: RoHS
from RS Components, Ltd.
Schurter 3-100-776 IEC Connector [See More]
- Filter Type: Single Phase
- Standards and Certifications: RoHS
- Package / Mounting: Flange mount, screw mount
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 50. Leakage Current (Max) (230VAC, 50Hz) : 8.5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 50
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 500mA 85VAC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Rated Voltage: 85
- Package / Mounting: Chassis Mount
- Operating Temperature: -40 to 85
from RS Components, Ltd.
Schurter 3-101-144 IEC Filter [See More]
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 10. Leakage Current (Max) (230VAC, 50Hz) : 5. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 10
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 1.5A 85V ~ 305VAC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: DIN Rail
- Standards and Certifications: RoHS
from RS Components, Ltd.
TE Connectivity 6609929-4 IEC Filter [See More]
- Package / Mounting: Spade
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 80. Leakage Current (Max) (230VAC, 50Hz) : 6. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 80
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 1.5A 85V ~ 305VAC 47Hz, 63Hz Single Stage PC Pins [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: Through Hole
- Standards and Certifications: RoHS
from RS Components, Ltd.
TE Connectivity 2-6609006-3 IEC Filter [See More]
- Package / Mounting: Spade
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 150. Leakage Current (Max) (230VAC, 50Hz) : 11. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 150
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 1.5A 85V ~ 305VAC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
from RS Components, Ltd.
EPCOS B84771A0001L000 IEC Filter [See More]
- Package / Mounting: Wire
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : DELTA (3 wire + ground). Electrical Characteristics. Current Rating (AMP) : 200. Leakage Current (Max) (230VAC, 50Hz) : 11. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 200
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 1.5A 85V ~ 305VAC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: DIN Rail
- Standards and Certifications: RoHS
from RS Components, Ltd.
EPCOS B84771A0003L000 IEC Filter [See More]
- Package / Mounting: Wire
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 10. Leakage Current (Max) (230VAC, 50Hz) : 10. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 10
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 1.5A 85V ~ 305VAC 47Hz, 63Hz Single Stage PC Pins [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: Through Hole
- Standards and Certifications: RoHS
from RS Components, Ltd.
EPCOS B84771A0008L000 IEC Filter [See More]
- Package / Mounting: Wire
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 60. Leakage Current (Max) (230VAC, 50Hz) : 10. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 60
- Standards and Certifications: RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 1.5A 85V ~ 305VAC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 85
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
from RS Components, Ltd.
EPCOS B84771A0015L000 IEC Filter [See More]
- Package / Mounting: Wire
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 80. Leakage Current (Max) (230VAC, 50Hz) : 10. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 80
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 3A AC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 45
- Package / Mounting: DIN Rail
- Product Standards: UL Recognized Component Mark (US and Canadian); BSI CE Conformity Marks; CE, cUL, UL
from RS Components, Ltd.
TE Connectivity 1-1609112-4 IEC Filter [See More]
- Package / Mounting: Spade
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 150. Leakage Current (Max) (230VAC, 50Hz) : 15. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 150
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 5A AC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 45
- Package / Mounting: DIN Rail
- Product Standards: UL Recognized Component Mark (US and Canadian); BSI CE Conformity Marks; CE, cUL, UL
from RS Components, Ltd.
TE Connectivity 1-6609104-4 IEC Filter [See More]
- Package / Mounting: Spade
- Standards and Certifications: RoHS
from TE Connectivity
Configuration Features. Wiring Configuration : WYE (4 wire + ground). Electrical Characteristics. Current Rating (AMP) : 200. Leakage Current (Max) (230VAC, 50Hz) : 15. Operating Voltage (VAC) : 440. Mechanical Attachment. Product Mount Type : Chassis Mount. [See More]
- Filter Type: Three Phase
- Operating Temperature: -25 to 85
- Rated Current: 200
- Standards and Certifications: ELV Directive; RoHS
from DigiKey
Single Phase EMC/EMI Line Filter 20A AC 47Hz, 63Hz Single Stage Terminal Block [See More]
- Filter Type: Single Phase
- Operating Temperature: -40 to 45
- Package / Mounting: DIN Rail
- Product Standards: UL Recognized Component Mark (US and Canadian); BSI CE Conformity Marks; CE, cUL, UL
from RS Components, Ltd.
EPCOS B84773A0002A000 IEC Filter [See More]
- Filter Type: Single Phase
- Standards and Certifications: RoHS
- Package / Mounting: Panel mount
from GAIA Converter
The GAIA Converter filter module FGDS-10A-50V provides a state-of-the-art product to fulfill Electromagnetic Interferences (EMI) requirements for Aerospace and Defence applications. The FGDS-10A-50V is a very compact and low loss solution for applications requiring up to 10A input current. The... [See More]
- Filter Type: DC
- Rated Voltage: 9 to 50
- Package / Mounting: Module
- Rated Current: 10
from Ohmite Manufacturing Co.
These AHM series range of medical double stage filters give superior performance when used in applications with low Impedance loads. The AH series controls continuous and intermittent interference noise and where high levels of mains borne interference are present. The chassis mount design of the AH... [See More]
- Package / Mounting: Module
- Rated Current: 1 to 50
- Rated Voltage: 250
- Operating Temperature: -25 to 85
from Utmel Electronic Limited
EMI Filter 30dB Flat Style SMD T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
1210 Ceramic Filters ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
IEC/EN 60939 approval. Rated currents from 10 to 250 A. 5 kV pulse test capability. Class Y2 capacitor. Capacitance : 10 to 1000 nF. Frequency : 50/60 Hz. Leakage current : 1.89 to 188 mA. Operating frequency : 0 to 60 Hz. Rated Current : 10 to 250 A. Voltage : ≤ 300 V [See More]
- Filter Type: Single Phase
- Rated Current: 10 to 250
- Rated Voltage: 250 to 1000
- Operating Temperature: -40 to 100
from Quarktwin Technology Ltd.
RF Shield 1 Piece 0.750" (19.05mm) X 0.750" (19.05mm) Solid Surface Mount [See More]
- Standards and Certifications: RoHS
from GAIA Converter
The GAIA Converter filter module FGDS-20A-50V provides a state-of-the-art product to fulfill Electromagnetic Interferences (EMI) requirements for Aerospace and Defence applications. The FGDS-20A-50V is a very compact and low loss solution for applications requiring up to 20A input current. The... [See More]
- Filter Type: DC
- Rated Voltage: 9 to 50
- Package / Mounting: Module
- Rated Current: 20
from Ohmite Manufacturing Co.
The AHL series includes design elements and components providing additional differential mode rejection in low frequency. For use with switched mode power supplies to reduce noise from power supply back into the mains. Filter also provides good attenuation of incoming interference. The AHL is... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Module
- Rated Current: 1 to 50
from Utmel Electronic Limited
EMI Filter 45dB Flat Style SMD [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
- Product Standards: IEC
from LCSC Electronics Technology (HK) Limited
50 Ω 3.125GHz SMD3216-4P Ceramic Filters ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Industry standard EMC solution for three-phase PDS filtering. Slim space-saving book-style housing. Solid safety connector blocks or optional wire output connections. Excellent attenuation performance. HV versions for up to 690 VAC. HVIT versions for IT distribution networks. P/L versions with low... [See More]
- Filter Type: Three Phase
- Rated Voltage: 277 to 690
- Package / Mounting: Flange
- Rated Current: 7 to 250
from Quarktwin Technology Ltd.
RF Shield 1 Piece 1.000" (25.40mm) X 1.000" (25.40mm) Solid Surface Mount [See More]
- Standards and Certifications: RoHS
from GAIA Converter
The GAIA Converter filter module FGDS-2A-50V provides a state-of-the-art product to fulfill Electromagnetic Interferences (EMI) requirements for Aerospace/Defence applications. The FGDS-2A-50V complies with major standards including : the US MIL-STD-461 rev C, D, E and rev F. the international... [See More]
- Filter Type: DC
- Rated Voltage: 9 to 50
- Package / Mounting: Module
- Rated Current: 2
from Ohmite Manufacturing Co.
The Ohmite AP series is designed for cost effective filtering while providing space savings. Current ratings are offered up to 6A with a max operating voltage of 250VAC. The AP series filters are great for PLC's, electronic instruments, PC periphery, and other applications were protection against... [See More]
- Filter Type: Single Phase
- Rated Current: 1 to 6
- Rated Voltage: 250
- Operating Temperature: -25 to 85
from Utmel Electronic Limited
EMI Filter 6-Line 35dB Flat Style SMD Carrier T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Plugin Ceramic Filters ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Very compact and light weight design requiring minimum space. Easy, time-saving installation and contacting. Protective covers as optional accessory available. Attenuation performance according to EN 61800-3/A11. Leakage current : 26.4 to 59.5 mA. Motor power : 5.5 to 560 kW. Operating frequency : 0... [See More]
- Filter Type: Three Phase
- Rated Voltage: 300 to 520
- Package / Mounting: Flange
- Rated Current: 10 to 1000
from Quarktwin Technology Ltd.
RF Shield 1 Piece 1.500" (38.10mm) X 1.500" (38.10mm) Solid Surface Mount [See More]
- Standards and Certifications: RoHS
from Ohmite Manufacturing Co.
The AGM series range of medical filters are designed to suppress undesirable electrical disturbances in power lines. They limit. the amplitude of interfering voltages on AC power lines and prevent them from propagating into or out of the filtered equipment. This series is a chassis mounted design... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Module
- Rated Current: 1 to 50
from Utmel Electronic Limited
EMI Filter C-Circuit 0.5A 16VDC Flat Style SMD Paper T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Free-hanging 圆 形 电 缆 一 体 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Free-hanging
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Compact filter solution for single-phase motor drive applications. Industrial grade safety terminal blocks. Designed to meet EN 55011/14/22. Compliant with IEC 60950. Leakage current : 4.9 to 11 mA. Operating frequency : 0 to 400 Hz. Performance : standard, high [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Flange
- Rated Current: 8 to 55
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 0.500" (12.70mm) X 1.750" (44.45mm) Non-Vented Surface Mount [See More]
- Standards and Certifications: RoHS
from Ohmite Manufacturing Co.
The Ohmite range of Medical Grade EMI Filters meet all the relevant medical grade Standards and requirements. The Ohmite AFM series of Power Entry Modules are designed for currents of 1 to 15 A and for single-phase circuits up to 250 VAC. The filters are approved according UL and CSA and are RoHS... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Power Entry Module
- Rated Current: 1 to 15
from Utmel Electronic Limited
EMI Filter C-Circuit 1A 50VDC Flat Style SMD T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Complies with IEC/EN 60601-1. Rated currents up to 10 A. Single or dual-fuse holder. Fuses Ø 5 x 20 mm. 2-pole rocker switch. General purpose application. Optional earth line choke (E type). Optional medical versions (B type). Leakage current : 373 µA. Leakage current (B types) : 2... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Power Entry Module
- Rated Current: 1 to 10
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 0.750" (19.05mm) X 0.750" (19.05mm) Non-Vented Surface Mount [See More]
- Standards and Certifications: RoHS
from Ohmite Manufacturing Co.
The TK series range of three phase filters with book shelf design is designed for motor drive applications requiring minimum space and convenient installation with superior performance at significant interference levels. The TK series can cover a wide range of three phase applications offering a... [See More]
- Filter Type: Three Phase
- Rated Voltage: 440 to 600
- Package / Mounting: Module
- Rated Current: 7 to 150
from Utmel Electronic Limited
EMI Filter C-Circuit 6A 6.3VDC Flat Style SMD Embossed T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Compact size. Rated currents up to 10 A. Complies with IEC/EN 60601-1. High quality 2-pole rocker switch. Good attenuation performance. Snap-in versions (S type). Leakage current : 373 µA. Operating frequency : 0 to 400 Hz. Performance : high. Rated Current : 1 to 10 A. Voltage : ≤ 250 V [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Power Entry Module
- Rated Current: 1 to 10
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 0.500" (12.70mm) X 0.750" (19.05mm) Non-Vented Surface Mount [See More]
- Standards and Certifications: RoHS
from Ohmite Manufacturing Co.
The Ohmite TG series of general purpose three phase filters is designed for use in a wide range of applications. All TG series filters contain a neutral connection point. The TG series reduces electromagnetic interference and helps in maintaining compliance with EMI emission standards. Th TG offers... [See More]
- Filter Type: Three Phase
- Rated Voltage: 440 to 520
- Package / Mounting: Module
- Rated Current: 1 to 150
from Utmel Electronic Limited
EMI Filter Circuits 0603 180MHz 10volt 25mA EMILFIL Array [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Snap fastener 圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Snap fastener
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Reduces conducted emissions towards the solar panel. Reduces the probability of EMI radiation off the solar panel. Helps to prevent premature panel aging. Helps to meet international EMC regulations. Most compact standard solution in the industry. FN 2210 without Cy capacitors to ground. Climatic... [See More]
- Filter Type: DC
- Rated Voltage: 1000
- Package / Mounting: Flange
- Rated Current: 260 to 2300
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 1.000" (25.40mm) X 1.000" (25.40mm) Non-Vented Through Hole [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter Circuits 0603 50MHz 10volts 75mA [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Snap fastener 圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Snap fastener
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Compact, space-saving design, optimized for industrial machinery. Combines high attenuation performance with low leakage current. Performance according to the machine tool standard EN 50370-1. Increases also the immunity if operated directly on the mains input. Leakage current : 3.4 to 6.8 mA. [See More]
- Filter Type: Three Phase
- Rated Voltage: 300 to 520
- Package / Mounting: Flange
- Rated Current: 8 to 160
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 1.000" (25.40mm) X 1.500" (38.10mm) Non-Vented Surface Mount [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter Circuits 100MHz [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Snap fastener 圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Snap fastener
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
High current 3-phase filter up to 2300A. Extremly compact and light weight design. Minimum installation foot print. Performance optimised for standard purpose applications. FN 3310 series without Cy capacitors to ground. Climatic category : 40/100/21 acc. to IEC60068-1. Terminals/Housing : Ni plated... [See More]
- Filter Type: Three Phase
- Rated Voltage: 300 to 520
- Package / Mounting: Flange
- Rated Current: 250 to 2300
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 0.500" (12.70mm) X 0.500" (12.70mm) Non-Vented Surface Mount [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter Circuits 150MHz [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Snap fastener 圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Snap fastener
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Compact four-wire filter for applications with limited space. High attenuation performance up to 300 MHz. Equally suitable for star and delta power networks. Leakage current : 175 to 0.5 mA. Operating frequency : 0 to 60 Hz. Performance : high. Rated Current : 4 to 25 A. Voltage : ≤ 440 V [See More]
- Filter Type: Three Phase
- Rated Voltage: 250 to 440
- Package / Mounting: Flange
- Rated Current: 4 to 25
from Quarktwin Technology Ltd.
RF Shield Shield, 2-Piece 1.000" (25.40mm) X 1.000" (25.40mm) Non-Vented Through Hole [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter LC-Circuit 0.02A 10VDC Flat Style SMD Embossed T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Snap fastener 圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Snap fastener
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
IEC/EN 60939 approval. Rated currents from 10 to 200 A. 2.5 kV pulse test capability. Class Y4 capacitor. Capacitance : 10 to 4700 nF. Leakage current : 0.98 to 460.7 mA. Rated Current : 10 to 200 A. Voltage : ≤ 130 V [See More]
- Filter Type: DC
- Rated Current: 10 to 200
- Rated Voltage: 130 to 650
- Operating Temperature: -40 to 100
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet CN-3190 Nickel-Copper (NI/CU) Fabric Conductive, Single Sided 0.125" (3.18mm) X 15.000' (4.60m) X 0.004" (0.11mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter LC-Circuit 0.1A 16VDC Flat Style SMD Paper T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
扁 平 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Compact state-of-the-art filter concept. Light weight plastic enclosure design. Minimized filter leakage current. Hinged safety covers. Revolutionary embedded filter terminals. Chassis or DIN-rail mounting option. Selectable performance level. Environmental friendly design without potting compound. [See More]
- Filter Type: Three Phase
- Rated Voltage: 300 to 520
- Package / Mounting: Module
- Rated Current: 10 to 50
from Quarktwin Technology Ltd.
RF EMI Absorbing Tape AB5000S Conductive, Single Sided 1.030" (26.16mm) X 12.000' (3.65m) X 0.005" (0.13mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter LC-Circuit 15dB 0.2A 25VDC Flat Style SMD Plastic T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Reduces conducted emissions towards the solar panel. Reduces the probability of EMI radiation off the solar panel. Helps to prevent pre-mature panel aging because of HF leakage currents. Helps to meet international EMC regulations for the entire PV system. Most compact standard solution in the... [See More]
- Filter Type: DC
- Rated Voltage: 1200
- Package / Mounting: Flange
- Rated Current: 25 to 2300
from Quarktwin Technology Ltd.
RF EMI Absorbing Tape AB5000S Conductive, Single Sided 1.030" (26.16mm) X 12.000' (3.65m) X 0.010" (0.25mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter LC-Circuit 2A 100VDC Flat Style SMD Automotive T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
Cable tie fixed 圆 形 电 缆 组 合 式 - Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Package / Mounting: Cable tie fixed
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Exceptional broadband attenuation performance from 10 kHz up to 30 MHz. Equally suitable for conventional and regenerative motor drives (latter with additional line reactor only). Slim and user-friendly book-style design with touch-safe terminal blocks for minimum space and maximum safety. Enables... [See More]
- Filter Type: Three Phase
- Rated Voltage: 300 to 520
- Package / Mounting: Flange
- Rated Current: 35 to 300
from Quarktwin Technology Ltd.
RF EMI Absorbing Tape AB5000S Conductive, Single Sided 1.030" (26.16mm) X 12.000' (3.65m) X 0.014" (0.35mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter Low Pass Array 20dB Flat Style SMD T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
- Product Standards: IEC
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Full functionality with RCDs according to IEC 61008 and new VDE 0664-110*. Compatible with 30 mA RCDs up to 30 m motor cable for electric shock protection according to IEC 61008. Compatible with 300 mA RCDs up to 100 m motor cable for fire protection according to IEC 60364-4-42 (VDE 0100-482). [See More]
- Filter Type: Three Phase
- Rated Voltage: 300 to 520
- Package / Mounting: Flange
- Rated Current: 7 to 180
from Quarktwin Technology Ltd.
RF EMI Absorbing Tape AB-5000 Conductive, Single Sided 1.030" (26.16mm) X 12.000' (3.65m) X 0.022" (0.55mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter Low Pass Array 40dB Flat Style SMD T/R [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Excellent filter performance for applications with high interference levels. Filters for two-phase supply up to 2x 520 VAC (P-P) available. Fast and comfortable snap-in installation on popular TS 35 DIN-rails up to 45 A. Industrial grade terminal blocks for unsurpassed electrical safety. Leakage... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250 to 520
- Package / Mounting: Flange
- Rated Current: 8 to 100
from Quarktwin Technology Ltd.
RF EMI Absorbing/Shielding Sheet AB6000 Polymer Resin, Metal Flakes Non-Conductive, Single Sided 10.000" (254.00mm) X 11.700" (297.00mm) X 0.004" (0.11mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
EMI Filter, 4, 6 and 8-Channel, with ESD Protection [See More]
- Package / Mounting: Surface Mount
- Standards and Certifications: RoHS
- Product Standards: IEC
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Superior attenuation performance. Optional earth line choke. Complies with IEC/EN 60601-1. Snap-in versions (S and S1 type). Hot inlet versions (HI type). Compliant IEC/EN 60601-1 : 1. Leakage current : 373 µA. Leakage current (B types) : 2 µA. Operating frequency : 0 to 400 Hz. [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Module
- Rated Current: 1 to 15
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1120 Aluminum Foil Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.004" (0.10mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 10A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Rated currents up to 15A. Superior attenuation performance. Integrated earth line choke. Complies with IEC/EN 60601-1. Snap-in versions (S and S1 type). Hot inlet versions (HI type). Compliant IEC/EN 60601-1 : 1. Leakage current : 373 µA. Leakage current (B types) : 2 µA. Operating... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Module
- Rated Current: 1 to 15
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1125 Copper Foil Acrylic, Non-Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.004" (0.09mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 10A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
- Clamp Filters (Ferrite Core with Case) ROHS [See More]
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Rated currents up to 15 A. Excellent performance/size ratio. Integrated earth line choke. Complies with IEC/EN 60601-1. Snap-in versions (S and S1 type). Optional wide mounting flanges. Compliant IEC/EN 60601-1 : 1. Leakage current : 373 µA. Leakage current (B types) : 2 µA. Operating... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Module
- Rated Current: 1 to 15
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1126 Copper Foil Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.004" (0.09mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 10A TH [See More]
- Package / Mounting: Through Hole
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
90 Ω@100MHz 300m Ω 2 - Common Mode Filters ROHS [See More]
- Rated Voltage: 50
- Operating Temperature: -40
- Rated Current: 0.3700
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Rated currents up to 20 A. Excellent performance/size ratio. Optional medical versions (B type) according to IEC/EN 60601-1. Snap-in versions (S and S1 type). Hot inlet versions (HI type). Optional overvoltage protection (Z type). Compliant IEC/EN 60601-1 : 1. Leakage current : 373 µA. Leakage... [See More]
- Filter Type: Single Phase
- Rated Voltage: 250
- Package / Mounting: Module
- Rated Current: 1 to 20
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1181 Copper Foil Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.003" (0.07mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 20A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
120 Ω@100MHz 300m Ω 2 - Common Mode Filters ROHS [See More]
- Rated Voltage: 50
- Operating Temperature: -40
- Rated Current: 0.3700
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
EMC solution for industrial inverters and motor drives. Rated currents from 8 to 280 A. Selectable voltage level of 440 V and 520 V. High differential and common-mode attenuation. Compliant with IEC 60950. Leakage current : 1.9 to 42.9 mA. Motor power : 3 to 160 kW. Operating frequency : 0 to 60 Hz. [See More]
- Filter Type: Three Phase
- Rated Voltage: 250 to 520
- Package / Mounting: Flange
- Rated Current: 8 to 280
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1182 Copper Foil Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.004" (0.09mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 2A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
260 Ω@100MHz 500m Ω 2 - Common Mode Filters ROHS [See More]
- Rated Voltage: 50
- Operating Temperature: -40
- Rated Current: 0.3100
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Three-phase and neutral line filter for general four-wire filtering tasks. Choice of connection style. Low operating leakage current. Compliant with IEC 60950. Suitable to meet EN 55011/14/22. Leakage current : 0.43 to 8 mA. Operating frequency : 0 to 60 Hz. Performance : high. Rated Current : 16 to... [See More]
- Filter Type: Three Phase
- Rated Voltage: 250 to 440
- Package / Mounting: Flange
- Rated Current: 16 to 150
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1183 Tin-Plated Copper Foil Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.003" (0.07mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 5A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
1uH@100kHz 600 Ω@100MHz 120m Ω 2 - Common Mode Filters ROHS [See More]
- Rated Voltage: 60
- Operating Temperature: -40
- Rated Current: 1.2
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Rated currents from 1 to 60 A. General purpose filtering performance. Optional medical versions (B type). Optional safety versions (A type). Leakage current : 0.74 mA. Leakage current (A types) : 0.074 mA. Leakage current (B types) : 0.002 mA. Operating frequency : 0 to 400 Hz. Performance :... [See More]
- Filter Type: Single Phase; DC
- Rated Voltage: 110 to 250
- Package / Mounting: Flange
- Rated Current: 1 to 60
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1245 Embossed Copper Foil Non-Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.004" (0.10mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 5A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
11uH@100kHz 1k Ω@100MHz 30m Ω 2 - Common Mode Filters ROHS [See More]
- Rated Voltage: 80
- Operating Temperature: -40
- Rated Current: 2.5
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Rated currents from 1 to 60 A. High differential-mode attenuation. Optional medical version (B type). Optional safety version (A type). Leakage current : 0.74 mA. Leakage current (A types) : 0.074 mA. Leakage current (B types) : 0.002 mA. Operating frequency : 0 to 400 Hz. Performance : standard [See More]
- Filter Type: Single Phase
- Rated Voltage: 110 to 250
- Package / Mounting: Flange
- Rated Current: 1 to 60
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1267 Embossed Aluminum Foil Non-Conductive, Single Sided 11.500" (292.00mm) X 18.000' (5.50m) X 0.005" (0.13mm) [See More]
- Standards and Certifications: RoHS
from Utmel Electronic Limited
LINE FILTER 250VAC 6A CHASS MNT [See More]
- Package / Mounting: Chassis Mount
- Standards and Certifications: RoHS
- Product Standards: CSA Mark (US, NRTL/C); CSA, UR, VDE
from LCSC Electronics Technology (HK) Limited
700uH@10kHz 27m Ω 2 - Common Mode Filters ROHS [See More]
- Rated Voltage: 250
- Operating Temperature: -40
- Rated Current: 4
- Standards and Certifications: RoHS
from Schaffner EMC Inc.
Rated currents from 1 to 30 A. High performance filter attenuation. High differential-mode attenuation. Optional medical versions (B type). Optional safety versions (A type). Optional overvoltage protection (Z type). Leakage current : 0.34 to 0 mA. Leakage current (A types) : 0.074 mA. Leakage... [See More]
- Filter Type: Single Phase; DC
- Rated Voltage: 110 to 250
- Package / Mounting: Flange
- Rated Current: 1 to 30
from Quarktwin Technology Ltd.
RF EMI Shielding Sheet 1120 Aluminum Foil Conductive, Single Sided 11.500" (292.00mm) X 12.000" (304.80mm) X 0.004" (0.10mm) [See More]
- Standards and Certifications: RoHS